Rechner Friert einfach ein! Suse 10.0 help

ing0 · 4 Sep. 2006

halli hallo,

hab linux 10.0 installiert, und es läuft alles ohne probleme, bis auf das kleine, aber absolut nervtötende manko, das sich das gesamte system einfach mal so aufhängt.
der zeitpunkt ist immer unterschiedlich, deshalb kann ich mir auch nicht vorstellen woran es hapern könnte.
mal beim booten, mal mittendrin und generell beim herunterfahren, wenn ich mal soweit komme.

bei einem reset wird die homeplatte beim booten gecheckt mit dem vorwand, die festplatte ist nicht ordentlich ungemounted worden. ist es vielleicht möglich, das es an den raid treibern liegt? o.ä? wäre um rat sehr dankbar

(hey ich habs geschafft den text komplett zu tippen! juhuu)

nollsa · 4 Sep. 2006

Hast du irgendwelche Updates gefahren z.B. KDE oder sowas und nicht alle Pakete aktualisiert? Ansonsten würde ich mal den Speicher mit MemTest prüfen, ob da alles ok ist.

ing0 · 4 Sep. 2006

hab das vollständige online update durch. die paketabhängikeiten sind auch ok. der memtest sagt auch nix aus.
hab grad mal die platten checken lassen, so ziemlich alle haben durch die mounterei gelitten.
ist es möglich irgendwie die treiber für die platten upzudaten o.ä?

Tidirium · 4 Sep. 2006

nollsa schrieb:
Hast du irgendwelche Updates gefahren z.B. KDE oder sowas und nicht alle Pakete aktualisiert? Ansonsten würde ich mal den Speicher mit MemTest prüfen, ob da alles ok ist.

Vor kurzem hatte ich aehnliche Probleme bei einem Rechner.
"Memtest" meldete auch pflichtbewusst fehler beim Speichertest.
Natuerlich sporasisch, nicht reproduzierbar, ebenso wie die
Systemabstuerze.

Es stellte sich dann der cache des Prozessors als defekt heraus.

Nicht immer ist alles so wie es scheint.

Tidirium · 4 Sep. 2006

ing0 schrieb:
hab das vollständige online update durch. die paketabhängikeiten sind auch ok. der memtest sagt auch nix aus.
hab grad mal die platten checken lassen, so ziemlich alle haben durch die mounterei gelitten.
ist es möglich irgendwie die treiber für die platten upzudaten o.ä?

Hast du mal die Systemmeldungen (LOGs) durchgeguckt?
Vll. taucht irgendwo eine Fehlermeldung auf die etwas darueber
aussagen, wo es klemmen _koennte_.

ing0 · 4 Sep. 2006

wo sind die logs?

Tidirium · 4 Sep. 2006

ing0 schrieb:
wo sind die logs?

hmmm...seltsame Frage, aber berechtigt wenn man die Dokus nicht liesst.

Im Verzeichnis:
/var/log
findest du _fast_ alle LOGs

Die Wichtigsten sind:
/var/log/messages (allgemeine Nachrichten)
/var/log/warn (Warnungen ... was auch sonst

)
/var/log/XFree86.0.log (LOG des grafischen Systems)

Dann gibt es noch den ganz wichtigen Befehl:
dmesg
"print or control the kernel ring buffer"
-> aus "man dmesg"

Guck da mal rein.

Gruss

ing0 · 4 Sep. 2006

okay das ist super, da ich aber linux nicht studiert hab, lass ich mal die log hier stehen:

Code:

Sep  4 20:26:36 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 20:26:36 linux udevd-event[6881]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6888]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 20:26:36 linux udevd-event[6953]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6956]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6955]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6954]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux [powersave]: ERROR (read_line:47) Could not read from file: '/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor'
Sep  4 20:26:36 linux [powersave]: ERROR (CPUFreq_Userspace:42) Could not set userspace governor, seems as if the cpufreq_userspace module is not loaded.
Sep  4 20:26:36 linux [powersave]: ERROR (read_line:47) Could not read from file: '/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies'
Sep  4 20:26:36 linux [powersave]: ERROR (read_line:47) Could not read from file: '/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq'
Sep  4 20:26:36 linux [powersave]: ERROR (read_value:82) Could not read value in file /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq: error: Invalid argument!
Sep  4 20:26:36 linux [powersave]: ERROR (read_line:47) Could not read from file: '/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq'
Sep  4 20:26:36 linux [powersave]: ERROR (read_value:82) Could not read value in file /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq: error: Invalid argument!
Sep  4 20:26:36 linux [powersave]: WARNING (getMinMaxSpeeds:349) Speedstepping not supported! Was the correct cpufreq module loaded?
Sep  4 20:26:36 linux udevd-event[6967]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6969]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux [powersave]: WARNING (initFreqsViaTesting:377) Could not read min and max speed
Sep  4 20:26:36 linux udevd-event[6973]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6965]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux [powersave]: ERROR (PM_Interface:231) Cannot create cpufreq objects
Sep  4 20:26:36 linux udevd-event[6993]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6998]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6989]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[6995]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7041]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7046]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7003]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7049]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7055]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7052]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7059]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7062]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7065]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7068]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7071]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7043]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7077]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7080]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7083]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:36 linux udevd-event[7074]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:37 linux udevd-event[7105]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:37 linux udevd-event[7108]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:37 linux udevd-event[7099]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:37 linux udevd-event[7143]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:37 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 20:26:37 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 20:26:38 linux udevd-event[7164]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:38 linux udevd-event[7163]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:26:52 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Sep  4 20:27:08 linux pppd[6303]: Timeout waiting for PADO packets
Sep  4 20:27:08 linux pppd[6335]: Timeout waiting for PADO packets
Sep  4 20:27:08 linux pppd[6303]: Unable to complete PPPoE Discovery
Sep  4 20:27:08 linux pppd[6335]: Unable to complete PPPoE Discovery
Sep  4 20:27:33 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
Sep  4 20:27:33 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 20:27:33 linux kdm: :1[7325]: Abnormal termination of greeter for display :1, code 0, signal 9
Sep  4 20:27:49 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
Sep  4 20:30:01 linux [powersave]: WARNING (checkEventTimeouts:1313) Timeout for event daemon.scheme.change with id 1 reached, removing it.
Sep  4 20:32:23 linux udevd[2406]: get_netlink_msg: no ACTION in payload found, skip event 'mount'
Sep  4 20:34:34 linux udevd[2406]: get_netlink_msg: no ACTION in payload found, skip event 'mount'
Sep  4 20:38:06 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
Sep  4 20:39:19 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Sep  4 20:39:22 linux syslog-ng[3767]: Changing permissions on special file /dev/xconsole
Sep  4 20:39:22 linux syslog-ng[3767]: Changing permissions on special file /dev/tty10
Sep  4 20:39:22 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
Sep  4 20:39:22 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
Sep  4 20:39:22 linux kernel: ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
Sep  4 20:39:22 linux kernel: hw_random: RNG not detected
Sep  4 20:39:22 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Sep  4 20:39:22 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Sep  4 20:39:22 linux kernel: skge: module not supported by Novell, setting U taint flag.
Sep  4 20:39:23 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
Sep  4 20:39:23 linux ifup: No configuration found for sit0
Sep  4 20:39:24 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Sep  4 20:39:24 linux ifup: No configuration found for eth1
Sep  4 20:39:25 linux ifup: No configuration found for eth2
Sep  4 20:39:25 linux mDNSResponder (Engineering Build) (Sep  9 2005 15:59:08) [6116]: starting
Sep  4 20:39:27 linux kernel:     ACPI-0304: *** Error: Looking up [_PPC] in namespace, AE_ALREADY_EXISTS
Sep  4 20:39:27 linux kernel:     ACPI-0622: *** Warning: During name lookup/catalog, AE_ALREADY_EXISTS
Sep  4 20:39:27 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 20:39:28 linux kernel:     ACPI-0304: *** Error: Looking up [_PPC] in namespace, AE_ALREADY_EXISTS
Sep  4 20:39:28 linux kernel:     ACPI-0622: *** Warning: During name lookup/catalog, AE_ALREADY_EXISTS
Sep  4 20:39:28 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 20:39:28 linux [powersave]: ERROR (CPUFreq_Userspace:42) Could not set userspace governor, seems as if the cpufreq_userspace module is not loaded.
Sep  4 20:39:28 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:28 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 20:39:29 linux [powersave]: ERROR (CPUFreq_Userspace:42) Could not set userspace governor, seems as if the cpufreq_userspace module is not loaded.
Sep  4 20:39:29 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:29 linux udevd-event[6593]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:39:29 linux udevd-event[6596]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:39:29 linux udevd-event[6597]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:39:29 linux udevd-event[6592]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:39:29 linux udevd-event[6605]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 20:39:29 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 20:39:30 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:30 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 0 kHz; Permission denied
Sep  4 20:39:30 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 134767772 kHz; Permission denied
Sep  4 20:39:30 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:30 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 0 kHz; Permission denied
Sep  4 20:39:30 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 134767772 kHz; Permission denied
Sep  4 20:39:31 linux udevd[2406]: get_netlink_msg: no ACTION in payload found, skip event 'mount'
Sep  4 20:39:34 linux udevd[2406]: get_netlink_msg: no ACTION in payload found, skip event 'umount'
Sep  4 20:39:36 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Sep  4 20:39:36 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 0 kHz; Permission denied
Sep  4 20:39:37 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:37 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 0 kHz; Permission denied
Sep  4 20:39:37 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:37 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:38 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:39 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:39 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:40 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:40 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:40 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:40 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:39:42 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:39:42 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:40:00 linux pppd[5900]: Timeout waiting for PADO packets
Sep  4 20:40:00 linux pppd[5900]: Unable to complete PPPoE Discovery
Sep  4 20:40:00 linux pppd[6037]: Timeout waiting for PADO packets
Sep  4 20:40:00 linux pppd[6037]: Unable to complete PPPoE Discovery
Sep  4 20:40:10 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:40:11 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:40:46 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:40:47 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:40:56 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:40:56 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:40:56 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:40:56 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:41:10 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:41:11 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:41:21 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:41:22 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:42:49 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:42:50 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:44:23 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:44:23 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 20:46:46 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 20:46:47 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 21:06:20 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 21:06:20 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 21:08:09 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 3000000 kHz; Permission denied
Sep  4 21:08:09 linux [powersave]: ERROR (setSpeed:86) Could not set speed to: 2800000 kHz; Permission denied
Sep  4 21:11:38 linux syslog-ng[4701]: Changing permissions on special file /dev/xconsole
Sep  4 21:11:38 linux syslog-ng[4701]: Changing permissions on special file /dev/tty10
Sep  4 21:11:38 linux ifup: No configuration found for sit0
Sep  4 21:11:39 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
Sep  4 21:11:39 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
Sep  4 21:11:39 linux kernel: ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
Sep  4 21:11:39 linux kernel: hw_random: RNG not detected
Sep  4 21:11:39 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Sep  4 21:11:39 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Sep  4 21:11:39 linux kernel: skge: module not supported by Novell, setting U taint flag.
Sep  4 21:11:39 linux kernel: usb 3-2: device not accepting address 2, error -71
Sep  4 21:11:39 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
Sep  4 21:11:39 linux ifup: No configuration found for eth1
Sep  4 21:11:39 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Sep  4 21:11:39 linux ifup: No configuration found for eth2
Sep  4 21:11:40 linux ifup: No configuration found for eth1
Sep  4 21:11:41 linux mDNSResponder (Engineering Build) (Sep  9 2005 15:59:08) [5875]: starting
Sep  4 21:11:43 linux kernel:     ACPI-0304: *** Error: Looking up [_PPC] in namespace, AE_ALREADY_EXISTS
Sep  4 21:11:43 linux kernel:     ACPI-0622: *** Warning: During name lookup/catalog, AE_ALREADY_EXISTS
Sep  4 21:11:43 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 21:11:44 linux kernel:     ACPI-0304: *** Error: Looking up [_PPC] in namespace, AE_ALREADY_EXISTS
Sep  4 21:11:44 linux kernel:     ACPI-0622: *** Warning: During name lookup/catalog, AE_ALREADY_EXISTS
Sep  4 21:11:44 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 21:11:44 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 21:11:44 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 21:11:44 linux udevd-event[6440]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6443]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6459]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6461]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6455]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6464]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6474]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6477]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6483]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6491]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6495]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6472]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6479]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6506]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6518]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6526]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6528]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6530]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6532]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6534]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6542]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6558]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6560]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6562]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6582]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6585]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6588]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6590]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6592]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6597]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6602]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6611]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6622]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6633]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6643]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6607]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6609]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6645]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6662]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6664]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6666]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6668]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6672]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6676]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6683]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6685]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6689]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6692]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6695]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6640]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6699]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6704]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6706]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6638]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6679]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:44 linux udevd-event[6710]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:11:45 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 21:11:45 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 21:11:46 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 21:11:46 linux kernel: Unable to load interpreter /lib/ld-linux.so.2
Sep  4 21:11:52 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Sep  4 21:12:16 linux pppd[5810]: Timeout waiting for PADO packets
Sep  4 21:12:16 linux pppd[5769]: Timeout waiting for PADO packets
Sep  4 21:12:16 linux pppd[5810]: Unable to complete PPPoE Discovery
Sep  4 21:12:16 linux pppd[5769]: Unable to complete PPPoE Discovery
Sep  4 21:14:09 linux syslog-ng[4740]: Changing permissions on special file /dev/xconsole
Sep  4 21:14:09 linux syslog-ng[4740]: Changing permissions on special file /dev/tty10
Sep  4 21:14:09 linux ifup: No configuration found for sit0
Sep  4 21:14:10 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
Sep  4 21:14:10 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
Sep  4 21:14:10 linux kernel: ip_conntrack version 2.1 (8191 buckets, 65528 max) - 248 bytes per conntrack
Sep  4 21:14:10 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Sep  4 21:14:10 linux kernel: hw_random: RNG not detected
Sep  4 21:14:10 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Sep  4 21:14:10 linux kernel: skge: module not supported by Novell, setting U taint flag.
Sep  4 21:14:10 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
Sep  4 21:14:10 linux ifup: No configuration found for eth1
Sep  4 21:14:10 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Sep  4 21:14:10 linux ifup: No configuration found for eth2
Sep  4 21:14:11 linux ifup: No configuration found for eth1
Sep  4 21:14:11 linux mDNSResponder (Engineering Build) (Sep  9 2005 15:59:08) [5825]: starting
Sep  4 21:14:13 linux kernel:     ACPI-0304: *** Error: Looking up [_PPC] in namespace, AE_ALREADY_EXISTS
Sep  4 21:14:13 linux kernel:     ACPI-0622: *** Warning: During name lookup/catalog, AE_ALREADY_EXISTS
Sep  4 21:14:13 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 21:14:14 linux udevd-event[6311]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:14:14 linux kernel:     ACPI-0304: *** Error: Looking up [_PPC] in namespace, AE_ALREADY_EXISTS
Sep  4 21:14:14 linux kernel:     ACPI-0622: *** Warning: During name lookup/catalog, AE_ALREADY_EXISTS
Sep  4 21:14:14 linux kernel:     ACPI-1174: *** Error: Method execution failed [\_PR_.CPU1._PDC] (Node dffe8480), AE_ALREADY_EXISTS
Sep  4 21:14:14 linux kernel: c01b2b3d
Sep  4 21:14:14 linux kernel: SMP 
Sep  4 21:14:14 linux kernel: Modules linked in: acpi_cpufreq speedstep_lib freq_table snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device button battery ac ppp_generic slhc af_packet edd usbnet usbhid sk98lin ohci1394 ieee1394 skge snd_intel8x0 snd_ac97_codec e100 mii generic ide_core i2c_i801 i2c_core snd_ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart ehci_hcd shpchp uhci_hcd pci_hotplug usbcore ip6t_REJECT ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter ip6table_mangle ip_conntrack ip_tables ip6table_filter ip6_tables ipv6 parport_pc lp parport dm_mod reiserfs fan thermal processor sr_mod cdrom sg ata_piix libata sd_mod scsi_mod
Sep  4 21:14:14 linux kernel: CPU:    1
Sep  4 21:14:14 linux kernel: EIP:    0060:[<c01b2b3d>]    Tainted: G     U VLI
Sep  4 21:14:14 linux udevd-event[6317]: run_program: '/usr/sbin/hal.hotplug' abnormal exit
Sep  4 21:14:14 linux kernel: EFLAGS: 00010206   (2.6.13-15.11-smp) 
Sep  4 21:14:14 linux kernel: EIP is at check_perm+0xed/0x200
Sep  4 21:14:14 linux kernel: eax: 00000006   ebx: f6738b00   ecx: c03bba0c   edx: 00000000
Sep  4 21:14:14 linux kernel: esi: f0116100   edi: ffffffea   ebp: f03a6888   esp: f782bf1c
Sep  4 21:14:14 linux kernel: ds: 007b   es: 007b   ss: 0068
Sep  4 21:14:14 linux kernel: Process powersaved (pid: 6198, threadinfo=f782a000 task=eca28540)
Sep  4 21:14:14 linux kernel: Stack: c0172085 00000000 f6738b00 f03a6888 dfe27400 ffffffe9 c017038a f0306050 
Sep  4 21:14:14 linux kernel:        00008000 f0bf1000 00000003 f0bf1000 c01702a2 f782bf54 f0306050 dfe27400 
Sep  4 21:14:14 linux kernel:        080dafa0 080dd1a8 00000003 00000101 00000001 00000000 f782a000 00000003 
Sep  4 21:14:14 linux kernel: Call Trace:
Sep  4 21:14:14 linux kernel:  [<c0172085>] get_empty_filp+0x55/0x110
Sep  4 21:14:14 linux kernel:  [<c017038a>] dentry_open+0xda/0x210
Sep  4 21:14:14 linux kernel:  [<c01702a2>] filp_open+0x42/0x50
Sep  4 21:14:14 linux kernel:  [<c017056e>] get_unused_fd+0xae/0xd0
Sep  4 21:14:14 linux kernel:  [<c0170685>] sys_open+0x45/0xe0
Sep  4 21:14:14 linux kernel:  [<c01042cb>] sysenter_past_esp+0x54/0x79
Sep  4 21:14:14 linux kernel: Code: e0 83 3a 02 8b 40 10 74 ab c1 e0 07 8d 84 10 00 01 00 00 ff 00 8b 46 28 85 c0 0f 84 ff 00 00 00 8b 40 04 85 c0 0f 84 f4 00 00 00 <8b> 40 04 89 04 24 8b 3c 24 85 ff 0f 84 a2 00 00 00 0f b7 43 1c 
Sep  4 21:14:14 linux kernel:  <3>Unable to load interpreter /lib/ld-linux.so.2

kann damit nur wenig anfangen, ich würde mal spontan darauf tippen, das der kernel meine hardware nicht leiden kann...

ing0 · 4 Sep. 2006

ich glaub ich hab die lösung für mein problem gefunden!
hab alle zusätzlichen festplatten und partitionen als fat32 formatiert, und kde runtergeworfen. jetzt hab ich gnome installiert und bislang kein absturz. alles macht einen ziemlich runden eindruck ^^ dennoch danke! man lernt schließlich nie aus

Tidirium · 4 Sep. 2006

Das sieht so aus, als waere da tatsaechlich was faul.

Versuche bitte mal folgendes:

Schalte bitte mal "acpi" beim booten aus.
Wenn der Grub dein Bootmenue anzeigt, solltest du die "Bootoptionen" mit
F2 aufrufen. Ich hoffe es ist F2.
Dort tippe dann "acpi=off" ein.
Pruefe, ob dein OS dann funktioniert, oder ob es bei den Fehlermeldungen bleibt.

Gruss

ing0 · 5 Sep. 2006

super, der acpi befehl hat funktioniert!

bleiben noch zwei fragen?
wozu ist das gut? und wie kann ich den fehler entgültig ausmerzen??

Tidirium · 5 Sep. 2006

ing0 schrieb:
super, der acpi befehl hat funktioniert!

bleiben noch zwei fragen?
wozu ist das gut? und wie kann ich den fehler entgültig ausmerzen??

http://de.wikipedia.org/wiki/Acpi

Dauerhaft eintragen kannst du das im Bootmanager.
Wenn das System gestartet ist:
/boot/grub/menu.lst
Da traegst du bei deiner Bootsektion zusaetzlich "acpi=off" ein.
Dann ist das dauerhaft.

Beispiel:
http://www.tecchannel.de/client/linux/429774/index3.html
Die Zeile:
kernel /boot/vmlinuz root=/dev/hda2 vga=normal
wird um acpi=off ergaenzt.
Also:
kernel /boot/vmlinuz root=/dev/hda2 vga=normal acpi=off

Gruss

PS: Die "powersave" Software schmiert gnadenlos ab und scheint den
Rest des Systems mitzunehmen.
Jedenfalls kannst das am Schluss deines LOGs lesen.
Bitte tue dir den gefallen und google mal nach LOG-File Erklaerungen.
Das ist nicht gerade unwichtig.
Wenigstens so allgemein solltest du wissen was da steht.

Ludi · 5 Sep. 2006

Hi Leute,

das ist sehr interessant.
Ich habe auch SuSE 10.0 laufen und nach rund 60 Tagen hatte die Kiste dann ihren ersten, ernsthaften "Frost" erlitten.

Etwa im selben Zeitraum (Anfang September) und auch gestern schon wieder!

Da ich nicht im RZ der Uni bin muss ich dort erstmal wieder anrufen und hochfahren lassen.

Abgesehen von ACPI, was sind noch moegliche Ursachen?
Ich werde die logs spaeter im Verlauf des Tages mal posten, hoffentlich ist das jetzt ein bekanntes Problem bei SuSE 10.0 und erst seit den letzten Tagen.

Alles was ich so weiss noch von Remote Seite ist:

ping funktioniert,
apache2 ist tod
ssh ist tod
pop vorhin ok... (beim ersten Frost war das nicht der Fall),
jedoch imap nicht mehr

KDE lief nicht, es war hoechst wahrscheinlich nur der "Login-Screen" zu sehen, weil der Kollege nicht rein kam.

Hat jemand ne Vermutung?
Wie gesagt, die logs kommen noch.

ing0 · 5 Sep. 2006

gut das sich leute damit auskennen

also powersave hab ich abgeschalten und acpi grundsätzlich ausgemacht. alles läuft!

ich darf mich rechtherzlich bei euch bedanken!!

Tidirium · 5 Sep. 2006

Ludi schrieb:
Hi Leute,
---schnipp
Ich werde die logs spaeter im Verlauf des Tages mal posten...
---schnipp
Wie gesagt, die logs kommen noch.

Das ist eine sehr gute Idee...

PS: Eigendlich sollte dieser thread besser unter Hardware/ACPI stehen.

ing0 · 5 Sep. 2006

tschuldigung, ich wusste ja vorher nicht wo das problem liegt!

muss erst noch ne doktor arbeit über linux schreiben glaub ich ... :wink:

Ludi · 5 Sep. 2006

Hi,

ja, immer gut auch wenn Leute ihre aktuellen Sorgen teilen!

Bei mir sind jetzt apm=off acpi=off, hoffentlich bleibt die Kiste am Leben, mein Urlaub geht bald los.

Code:

host:/ # chkconfig |grep powersaved
powersaved                on
host:/ # chkconfig powersaved off
host:/ # uptime
  8:31pm  up   7:10,  2 users,  load average: 0.03, 0.06, 0.05

Mal sehen, ich will jetzt erst noch eine Postfix-Sorge los werden, gehoert aber nicht hier her...

Ludi · 5 Sep. 2006

Ok, hier ein relevanter Ausschnitt aus /var/log/messages:

Unten:
Nach dem Reboot irgendwann...der muss um 13-14 Uhr sowas gewesen sein.

Ich hatte kurzerhand mit chkconfig powersave deaktiviert, siehe auch oben...

Code:

Sep  5 15:05:44 physik kernel: powernow: This module only works with AMD K7 CPUs
Sep  5 15:05:44 physik rcpowersaved: CPU frequency scaling is not supported by your processor.
Sep  5 15:05:44 physik rcpowersaved: enter 'CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Sep  5 15:05:44 physik rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available
Sep  5 15:05:45 physik [powersave]: ERROR (CPUFreq_Userspace:42) Could not set userspace governor, seems as if the cpufreq_userspace module is
 not loaded.
Sep  5 15:05:45 physik [powersave]: ERROR (read_line:43) Could not open file for reading: '/sys/devices/system/cpu/cpu0/cpufreq/scaling_availa
ble_frequencies'
Sep  5 15:05:45 physik [powersave]: ERROR (read_line:43) Could not open file for reading: '/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_fr
eq'
Sep  5 15:05:45 physik [powersave]: ERROR (read_value:82) Could not read value in file /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq:
error: No such file or directory!
Sep  5 15:05:45 physik [powersave]: ERROR (read_line:43) Could not open file for reading: '/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_fr
eq'
Sep  5 15:05:45 physik [powersave]: ERROR (read_value:82) Could not read value in file /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq:
error: No such file or directory!
Sep  5 15:05:45 physik [powersave]: WARNING (getMinMaxSpeeds:349) Speedstepping not supported! Was the correct cpufreq module loaded?
Sep  5 15:05:45 physik [powersave]: WARNING (initFreqsViaTesting:377) Could not read min and max speed
Sep  5 15:05:45 physik [powersave]: ERROR (PM_Interface:231) Cannot create cpufreq objects

Code:

Sep  5 04:28:32 physik kernel: printk: 2 messages suppressed.
Sep  5 04:28:32 physik kernel: oom-killer: gfp_mask=0xd0, order=0
Sep  5 04:28:32 physik kernel: Mem-info:
Sep  5 04:28:32 physik kernel: DMA per-cpu:
Sep  5 04:28:32 physik kernel: cpu 0 hot: low 2, high 6, batch 1 used:5
Sep  5 04:28:32 physik kernel: cpu 0 cold: low 0, high 2, batch 1 used:0
Sep  5 04:28:32 physik kernel: cpu 1 hot: low 2, high 6, batch 1 used:5
Sep  5 04:28:32 physik kernel: cpu 1 cold: low 0, high 2, batch 1 used:1
Sep  5 04:28:32 physik kernel: Normal per-cpu:
Sep  5 04:28:32 physik kernel: cpu 0 hot: low 62, high 186, batch 31 used:86
Sep  5 04:28:32 physik kernel: cpu 0 cold: low 0, high 62, batch 31 used:44
Sep  5 04:28:32 physik kernel: cpu 1 hot: low 62, high 186, batch 31 used:68
Sep  5 04:28:32 physik kernel: cpu 1 cold: low 0, high 62, batch 31 used:36
Sep  5 04:29:34 physik kernel: HighMem per-cpu: empty
Sep  5 04:29:34 physik kernel: Free pages:        4804kB (0kB HighMem)
Sep  5 04:29:34 physik kernel: Active:55277 inactive:53469 dirty:0 writeback:0 unstable:0 free:1201 slab:9232 mapped:108942 pagetables:4270
Sep  5 04:29:34 physik kernel: DMA free:2032kB min:88kB low:108kB high:132kB active:4576kB inactive:4020kB present:16384kB pages_scanned:8904
all_unreclaimable? yes
Sep  5 04:29:34 physik kernel: lowmem_reserve[]: 0 486 486
Sep  5 04:29:34 physik kernel: Normal free:2772kB min:2776kB low:3468kB high:4164kB active:216532kB inactive:209856kB present:498224kB pages_s
canned:445462 all_unreclaimable? yes
Sep  5 04:29:34 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:29:34 physik kernel: HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unrecla
imable? no
Sep  5 04:29:34 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:29:34 physik kernel: DMA: 0*4kB 2*8kB 0*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 2032kB
Sep  5 04:29:34 physik kernel: Normal: 1*4kB 10*8kB 2*16kB 1*32kB 1*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 2772kB
Sep  5 04:29:34 physik kernel: HighMem: empty
Sep  5 04:29:34 physik kernel: Swap cache: add 579014, delete 578753, find 110893/116795, race 0+79
Sep  5 04:29:34 physik kernel: Free swap  = 0kB
Sep  5 04:29:34 physik kernel: Total swap = 2104472kB
Sep  5 04:29:34 physik kernel: Free swap:            0kB
Sep  5 04:29:34 physik kernel: 128652 pages of RAM
Sep  5 04:29:34 physik kernel: 0 pages of HIGHMEM
Sep  5 04:29:34 physik kernel: 2354 reserved pages
Sep  5 04:29:34 physik kernel: 148703 pages shared
Sep  5 04:30:12 physik /usr/sbin/cron[13242]: (wwwrun) CMD (  php /usr/share/cacti/poller.php > /dev/null 2>&1)
Sep  5 04:30:14 physik kernel: 261 pages swap cached
Sep  5 04:30:15 physik kernel: 0 pages dirty
Sep  5 04:30:15 physik kernel: 0 pages writeback
Sep  5 04:30:17 physik kernel: 108942 pages mapped
Sep  5 04:30:17 physik kernel: 9232 pages slab
Sep  5 04:30:18 physik kernel: 4270 pages pagetables
Sep  5 04:30:18 physik kernel: Out of Memory: Killed process 15344 (ntop).
Sep  5 04:30:18 physik kernel: oom-killer: gfp_mask=0xd0, order=0
Sep  5 04:30:18 physik kernel: Mem-info:
Sep  5 04:30:18 physik kernel: DMA per-cpu:
Sep  5 04:30:18 physik kernel: cpu 0 hot: low 2, high 6, batch 1 used:5
Sep  5 04:30:18 physik kernel: cpu 0 cold: low 0, high 2, batch 1 used:0
Sep  5 04:30:18 physik kernel: cpu 1 hot: low 2, high 6, batch 1 used:5
Sep  5 04:30:18 physik kernel: cpu 1 cold: low 0, high 2, batch 1 used:1
Sep  5 04:30:18 physik kernel: Normal per-cpu:
Sep  5 04:30:18 physik kernel: cpu 0 hot: low 62, high 186, batch 31 used:86
Sep  5 04:30:18 physik kernel: cpu 0 cold: low 0, high 62, batch 31 used:44
Sep  5 04:30:18 physik kernel: cpu 1 hot: low 62, high 186, batch 31 used:68
Sep  5 04:30:18 physik kernel: cpu 1 cold: low 0, high 62, batch 31 used:36
Sep  5 04:30:18 physik kernel: HighMem per-cpu: empty
Sep  5 04:30:18 physik kernel: Free pages:        4804kB (0kB HighMem)
Sep  5 04:30:18 physik kernel: Active:55278 inactive:53468 dirty:0 writeback:0 unstable:0 free:1201 slab:9232 mapped:108942 pagetables:4270
Sep  5 04:30:19 physik kernel: DMA free:2032kB min:88kB low:108kB high:132kB active:4576kB inactive:4020kB present:16384kB pages_scanned:8904
all_unreclaimable? yes
Sep  5 04:30:19 physik kernel: lowmem_reserve[]: 0 486 486
Sep  5 04:30:19 physik sshd[13239]: Did not receive identification string from 82.141.50.69
Sep  5 04:30:20 physik kernel: Normal free:2772kB min:2776kB low:3468kB high:4164kB active:216536kB inactive:209852kB present:498224kB pages_s
canned:446089 all_unreclaimable? yes
Sep  5 04:30:21 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:30:21 physik kernel: HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unrecla
imable? no
Sep  5 04:30:22 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:30:22 physik kernel: DMA: 0*4kB 2*8kB 0*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 2032kB
Sep  5 04:30:24 physik kernel: Normal: 1*4kB 10*8kB 2*16kB 1*32kB 1*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 2772kB
Sep  5 04:30:24 physik kernel: HighMem: empty
Sep  5 04:30:25 physik kernel: Swap cache: add 579014, delete 578753, find 110893/116795, race 0+79
Sep  5 04:30:25 physik kernel: Free swap  = 0kB
Sep  5 04:30:25 physik kernel: Total swap = 2104472kB
Sep  5 04:30:25 physik kernel: Free swap:            0kB
Sep  5 04:30:25 physik kernel: 128652 pages of RAM
Sep  5 04:30:26 physik kernel: 0 pages of HIGHMEM
Sep  5 04:30:27 physik kernel: 2354 reserved pages
Sep  5 04:30:27 physik kernel: 148707 pages shared
Sep  5 04:30:27 physik kernel: 261 pages swap cached
Sep  5 04:30:27 physik kernel: 0 pages dirty
Sep  5 04:30:27 physik kernel: 0 pages writeback
Sep  5 04:30:27 physik kernel: 108942 pages mapped
Sep  5 04:30:27 physik kernel: 9232 pages slab
Sep  5 04:30:27 physik kernel: 4270 pages pagetables
Sep  5 04:30:27 physik kernel: oom-killer: gfp_mask=0xd0, order=0
Sep  5 04:30:27 physik kernel: Mem-info:
Sep  5 04:30:27 physik kernel: DMA per-cpu:
Sep  5 04:30:27 physik kernel: cpu 0 hot: low 2, high 6, batch 1 used:5
Sep  5 04:30:27 physik kernel: cpu 0 cold: low 0, high 2, batch 1 used:0
Sep  5 04:30:27 physik kernel: cpu 1 hot: low 2, high 6, batch 1 used:5
Sep  5 04:30:27 physik kernel: cpu 1 cold: low 0, high 2, batch 1 used:1
Sep  5 04:30:27 physik kernel: Normal per-cpu:
Sep  5 04:30:27 physik kernel: cpu 0 hot: low 62, high 186, batch 31 used:86
Sep  5 04:30:27 physik kernel: cpu 0 cold: low 0, high 62, batch 31 used:44
Sep  5 04:30:27 physik kernel: cpu 1 hot: low 62, high 186, batch 31 used:68
Sep  5 04:30:27 physik kernel: cpu 1 cold: low 0, high 62, batch 31 used:36
Sep  5 04:30:27 physik kernel: HighMem per-cpu: empty
Sep  5 04:30:28 physik kernel: Free pages:        4804kB (0kB HighMem)
Sep  5 04:30:30 physik kernel: Active:55282 inactive:53464 dirty:0 writeback:0 unstable:0 free:1201 slab:9232 mapped:108942 pagetables:4270
Sep  5 04:30:30 physik kernel: DMA free:2032kB min:88kB low:108kB high:132kB active:4576kB inactive:4020kB present:16384kB pages_scanned:8904
all_unreclaimable? yes
Sep  5 04:30:30 physik kernel: lowmem_reserve[]: 0 486 486
Sep  5 04:30:30 physik kernel: Normal free:2772kB min:2776kB low:3468kB high:4164kB active:216552kB inactive:209836kB present:498224kB pages_s
canned:446551 all_unreclaimable? yes
Sep  5 04:30:31 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:30:31 physik kernel: HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unrecla
imable? no
Sep  5 04:30:31 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:30:31 physik kernel: DMA: 0*4kB 2*8kB 0*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 2032kB
Sep  5 04:30:31 physik kernel: Normal: 1*4kB 10*8kB 2*16kB 1*32kB 1*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 2772kB
Sep  5 04:30:31 physik kernel: HighMem: empty
Sep  5 04:30:31 physik kernel: Swap cache: add 579014, delete 578753, find 110893/116795, race 0+79
Sep  5 04:30:32 physik kernel: Free swap  = 0kB
Sep  5 04:30:32 physik kernel: Total swap = 2104472kB
Sep  5 04:30:32 physik kernel: Free swap:            0kB
Sep  5 04:30:32 physik kernel: 128652 pages of RAM
Sep  5 04:30:34 physik kernel: 0 pages of HIGHMEM
Sep  5 04:30:34 physik kernel: 2354 reserved pages
Sep  5 04:30:34 physik kernel: 148696 pages shared
Sep  5 04:30:34 physik kernel: 261 pages swap cached
Sep  5 04:30:34 physik kernel: 0 pages dirty
Sep  5 04:30:34 physik kernel: 0 pages writeback
Sep  5 04:30:34 physik kernel: 108942 pages mapped
Sep  5 04:30:34 physik kernel: 9232 pages slab
Sep  5 04:30:34 physik kernel: 4270 pages pagetables
Sep  5 04:30:34 physik kernel: oom-killer: gfp_mask=0xd0, order=0
Sep  5 04:30:34 physik kernel: Mem-info:
Sep  5 04:30:34 physik kernel: DMA per-cpu:
Sep  5 04:30:34 physik kernel: cpu 0 hot: low 2, high 6, batch 1 used:5
Sep  5 04:30:34 physik kernel: cpu 0 cold: low 0, high 2, batch 1 used:0
Sep  5 04:30:34 physik kernel: cpu 1 hot: low 2, high 6, batch 1 used:5
Sep  5 04:30:34 physik kernel: cpu 1 cold: low 0, high 2, batch 1 used:1
Sep  5 04:30:34 physik kernel: Normal per-cpu:
Sep  5 04:30:34 physik kernel: cpu 0 hot: low 62, high 186, batch 31 used:86
Sep  5 04:30:34 physik kernel: cpu 0 cold: low 0, high 62, batch 31 used:44
Sep  5 04:30:34 physik kernel: cpu 1 hot: low 62, high 186, batch 31 used:68
Sep  5 04:30:34 physik kernel: cpu 1 cold: low 0, high 62, batch 31 used:36
Sep  5 04:30:34 physik kernel: HighMem per-cpu: empty
Sep  5 04:30:34 physik kernel: Free pages:        4804kB (0kB HighMem)
Sep  5 04:30:34 physik kernel: Active:55304 inactive:53442 dirty:0 writeback:0 unstable:0 free:1201 slab:9232 mapped:108942 pagetables:4270
Sep  5 04:30:34 physik kernel: DMA free:2032kB min:88kB low:108kB high:132kB active:4576kB inactive:4020kB present:16384kB pages_scanned:8904
all_unreclaimable? yes
Sep  5 04:30:35 physik kernel: lowmem_reserve[]: 0 486 486
Sep  5 04:30:35 physik kernel: Normal free:2772kB min:2776kB low:3468kB high:4164kB active:216640kB inactive:209748kB present:498224kB pages_s
canned:447354 all_unreclaimable? yes
Sep  5 04:30:37 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:30:37 physik kernel: HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unrecla
imable? no
Sep  5 04:30:38 physik kernel: lowmem_reserve[]: 0 0 0
Sep  5 04:30:39 physik kernel: DMA: 0*4kB 2*8kB 0*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 2032kB
Sep  5 04:31:04 physik kernel: Normal: 1*4kB 10*8kB 2*16kB 1*32kB 1*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 2772kB
Sep  5 04:31:05 physik kernel: HighMem: empty
Sep  5 04:31:06 physik kernel: Swap cache: add 579014, delete 578753, find 110893/116795, race 0+79
Sep  5 04:31:07 physik kernel: Free swap  = 0kB
Sep  5 04:31:07 physik kernel: Total swap = 2104472kB
Sep  5 04:31:07 physik kernel: Free swap:            0kB
Sep  5 04:31:09 physik kernel: 128652 pages of RAM
Sep  5 04:31:09 physik kernel: 0 pages of HIGHMEM
Sep  5 04:31:09 physik kernel: 2354 reserved pages
Sep  5 04:31:09 physik kernel: 148708 pages shared
Sep  5 04:31:11 physik kernel: 261 pages swap cached
Sep  5 04:31:11 physik kernel: 0 pages dirty
Sep  5 04:31:11 physik kernel: 0 pages writeback
...

Kann damit wer was anfangen?
Teilweise wiederholen sich die Kernel-Meldungen ja...
Ich sehe in der message sonst kaum Kernel Meldungen dieser Art!

Ich glaube um diese Uhrzeit sind dann wohl SSH/Mail/Apache2/etc. gefroren!

Komischerweise lief der Server weiterhin funktionierend als Router fuer alle Kollegen im LAN.

Wer vermutet was?
Oder sind das Routine Kernel Ausgaben?

Irgendwie war mir die Log von FreeBSD wesentlich sympathischer als die von Linux, welche innerhalb von einer Nacht ein ganzes Buch fuellen tut...

Danke!

Edit:

Und dann passiert z.B. folgendes:

Code:

Sep  5 04:30:19 physik sshd[13239]: Did not receive identification string from xx.xx.xx.xx

-> SSH Verbindung will nicht

Rechner Friert einfach ein! Suse 10.0 help

ing0

Member

nollsa

Advanced Hacker

ing0

Member

Tidirium

Newbie

Tidirium

Newbie

ing0

Member

Tidirium

Newbie

ing0

Member

ing0

Member

Tidirium

Newbie

ing0

Member

Tidirium

Newbie

Ludi

Member

ing0

Member

Tidirium

Newbie

ing0

Member

Ludi

Member

Ludi

Member

Rechner Friert einfach ein! Suse 10.0 *help*

Member

Advanced Hacker

Member

Newbie

Newbie

Member

Newbie

Member

Member

Newbie

Member

Newbie

Member

Member

Newbie

Member

Member

Member

Rechner Friert einfach ein! Suse 10.0 help