Hallo
Ich habe 2 Festplatten mit 3 Betriebssystemen: Festplatte 1 mit Vista und Suse 11.1, Festplatte 2 mit WinXp. Yast hat das auch richtig erkannt und das Booten funktioniert. Hier meine aktuelle menu.list :
Nun möchte ich aber , daß sich die beiden Windows Systeme nicht gegeseitig sehen. Ich habe im Wiki gelesen , daß es dafür die Befehle hide und unhide gibt. Mir ist aber nicht klar, wird zuerst gemappt und dann versteckt ? Und, wenn ja , was wird versteckt , das gemappte oder das Original ?
Schöne Weihnachten
Heinz
Ich habe 2 Festplatten mit 3 Betriebssystemen: Festplatte 1 mit Vista und Suse 11.1, Festplatte 2 mit WinXp. Yast hat das auch richtig erkannt und das Booten funktioniert. Hier meine aktuelle menu.list :
# Modified by YaST2. Last modification on Do Dez 25 23:14:02 UTC 2008
default 0
timeout 8
gfxmenu (hd0,5)/boot/message
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.1 - 2.6.27.7-9
root (hd0,5)
kernel /boot/vmlinuz-2.6.27.7-9-default root=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1KLB12899-part6 resume=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1KLB12899-part5 splash=silent showopts vga=0x31a
initrd /boot/initrd-2.6.27.7-9-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.1 - 2.6.27.7-9
root (hd0,5)
kernel /boot/vmlinuz-2.6.27.7-9-default root=/dev/disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJ1KLB12899-part6 showopts ide=nodma apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd /boot/initrd-2.6.27.7-9-default
###Don't change this comment - YaST2 identifier: Original name: windows 1###
title Vista
map (hd0) (hd0)
map (hd0) (hd0)
rootnoverify (hd0,0)
makeactive
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: windows 2###
title WinXP
map (hd1) (hd0)
map (hd0) (hd1)
rootnoverify (hd1,0)
makeactive
chainloader +1
Nun möchte ich aber , daß sich die beiden Windows Systeme nicht gegeseitig sehen. Ich habe im Wiki gelesen , daß es dafür die Befehle hide und unhide gibt. Mir ist aber nicht klar, wird zuerst gemappt und dann versteckt ? Und, wenn ja , was wird versteckt , das gemappte oder das Original ?
Schöne Weihnachten
Heinz