Nach update auf 42.2 USB als CR-ROM erkannt

[MH1962]

Wie war es denn eigentlich VOR dem Update? Wurde da der "Stick" eventuell als Human Interface Device erkannt? Wenn ja, dann wird er das immer noch, denn zwischen dem ganzen CDROM-Kram sieht man ja auch noch folgende Zeile:

[  392.420813] hid-generic 0003:0D46:4181.0003: hiddev0,hidraw2: USB HID v1.11 Device [KOBIL Systems mIDentity 4smart] on usb-0000:00:1a.0-1.5.2/input1

 

[sapo]

nun wie es vor dem Update war, weiss ich leider nicht.
Ich hab am Arbeitsplatz ein rhel7 am laufen und hab den stick da kurz eingesteckt (obwohl von Security verboten). Ist auch als CD Rom, aber ich kann die "CD Rom" öffnen. Wie kann ich im Opensuse die CD Rom als Dateisystem öffnen?
hier der output vom rhel

[martin@oc0840508633 ~]$ dmesg | grep -i usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8001
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb 2-8: new high speed USB device number 2 using xhci_hcd
usb 2-8: New USB device found, idVendor=5986, idProduct=0366
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: SunplusIT Inc
usb 2-8: configuration #1 chosen from 1 choice
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:00:14.0: USB bus 3 deregistered
usb usb2: USB disconnect, device number 1
usb 2-8: USB disconnect, device number 2
xhci_hcd 0000:00:14.0: USB bus 2 deregistered
usb 1-1: reset high speed USB device number 2 using ehci_hcd
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb 2-8: new high speed USB device number 2 using xhci_hcd
usb 2-8: New USB device found, idVendor=5986, idProduct=0366
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: SunplusIT Inc
usb 2-8: configuration #1 chosen from 1 choice
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input15
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:00:14.0: USB bus 3 deregistered
usb usb2: USB disconnect, device number 1
usb 2-8: USB disconnect, device number 2
xhci_hcd 0000:00:14.0: USB bus 2 deregistered
usb 1-1: reset high speed USB device number 2 using ehci_hcd
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb 2-8: new high speed USB device number 2 using xhci_hcd
usb 2-8: New USB device found, idVendor=5986, idProduct=0366
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: SunplusIT Inc
usb 2-8: configuration #1 chosen from 1 choice
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input16
usb 2-2: new high speed USB device number 3 using xhci_hcd
usb 2-2: New USB device found, idVendor=03f0, idProduct=2514
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
usb 2-2.3: new low speed USB device number 4 using xhci_hcd
usb 2-2.3: New USB device found, idVendor=046d, idProduct=c016
usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.3: Product: Optical USB Mouse
usb 2-2.3: Manufacturer: Logitech
usb 2-2.3: configuration #1 chosen from 1 choice
usb 2-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input17
generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2.3/input0
usb 2-2.4: new low speed USB device number 5 using xhci_hcd
usb 2-2.4: New USB device found, idVendor=04b3, idProduct=3025
usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.4: Product: USB NetVista Full Width Keyboard.
usb 2-2.4: Manufacturer: LITE-ON Technology
usb 2-2.4: configuration #1 chosen from 1 choice
usb 2-2.4: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input18
generic-usb 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:14.0-2.4/input0
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:00:14.0: USB bus 3 deregistered
usb usb2: USB disconnect, device number 1
usb 2-2: USB disconnect, device number 3
usb 2-2.3: USB disconnect, device number 4
usb 2-2.4: USB disconnect, device number 5
usb 2-8: USB disconnect, device number 2
xhci_hcd 0000:00:14.0: USB bus 2 deregistered
usb 1-1: reset high speed USB device number 2 using ehci_hcd
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb 2-8: new high speed USB device number 2 using xhci_hcd
usb 2-8: New USB device found, idVendor=5986, idProduct=0366
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: SunplusIT Inc
usb 2-8: configuration #1 chosen from 1 choice
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input19
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:00:14.0: USB bus 3 deregistered
usb usb2: USB disconnect, device number 1
usb 2-8: USB disconnect, device number 2
xhci_hcd 0000:00:14.0: USB bus 2 deregistered
usb 1-1: reset high speed USB device number 2 using ehci_hcd
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.13.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb 2-8: new high speed USB device number 2 using xhci_hcd
usb 2-8: New USB device found, idVendor=5986, idProduct=0366
usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: SunplusIT Inc
usb 2-8: configuration #1 chosen from 1 choice
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input20
usb 2-1: new high speed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=0d46, idProduct=4181
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: mIDentity 4smart
usb 2-1: Manufacturer: KOBIL Systems
usb 2-1: SerialNumber: NW124205807
usb 2-1: configuration #1 chosen from 1 choice
generic-usb 0003:0D46:4181.0003: hiddev96,hidraw0: USB HID v1.11 Device [KOBIL Systems mIDentity 4smart] on usb-0000:00:14.0-1/input1
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
[martin@oc0840508633 ~]$

Danke im voraus für die Hilfe

 

[spoensche]

Das mIdentity Token wird nicht als CD-ROM eingebunden, sondern mittels des usb-storage Treibers. Der usb-storage Treiber übernimmt die SCSI Emulation, damit z.B. USB-Festplatten verwendet werden können. In deinem Fall also als MMC Storage Device. Siehe Logauszug

usb 2-1: new high speed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=0d46, idProduct=4181
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: mIDentity 4smart
usb 2-1: Manufacturer: KOBIL Systems
usb 2-1: SerialNumber: NW124205807
usb 2-1: configuration #1 chosen from 1 choice
generic-usb 0003:0D46:4181.0003: hiddev96,hidraw0: USB HID v1.11 Device [KOBIL Systems mIDentity 4smart] on usb-0000:00:14.0-1/input1
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete

Das der mIdent Stick unter SuSE als CD-ROM verwendet wird, liegt zu 98% daran, dass andere Udev Regeln verwendet werden als bei RedHat.