Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

[gelöst] Netz erst nach "rcnetwork restart" ?!

Alles rund um das Internet, Internet-Anwendungen (E-Mail, Surfen, Cloud usw.) und das Einrichten von Netzwerken einschl. VPN unter Linux

Moderator: Moderatoren

ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

[gelöst] Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

zur Lösung
Hallo LC-Community,

nachdem ich jetzt schon das halbe Internet und den LC leider erfolglos durchsucht habe, muss ich einen neuen Fred erstellen. Irgendwann nach einem OnlineUpdate wollte mein Netzwerk nicht mehr so richtig: um eine Internetverbindung zu bekommen muss ich immer - nach jedem Bootvorgang - ein rcnetwork restart absetzen... :irre: :???:
Die Netzwerk-Hardware (LAN/wLAN) wird problemlos erkannt, aber wie gesagt, erst nach rcnetwork restart funktioniert sie auch richtig, vorher gibt's kein ping, kein pong, kein garnix!

Kann mir bitte jemand helfen, diesen Murks zu lösen, bevor ich mit dem nächsten Problem, was davon abhängig ist, ankomme: das ganze Netzwerk soll schließlich über DHCP und knetworkmanager laufen, was aber schon zweimal nicht geht. DHCP ja, knetworkmanager nein (stürtzt beim Erstellen einer Verbindung regelmässig ab...) auch das ist :irre:

Hier noch ein paar Daten:

Code: Alles auswählen

collectNWData.sh V0.6.1.4
--- Welcher Netzwerkverbindungtyp soll getestet werden?
--- (2) Kabellose Verbindung (WLAN)
--- Welche Netzwerktopologie liegt vor?
--- (2) WLAN HW router <---> LinuxClient
--- Auf welchem Rechner wird das Script ausgeführt?
--- (1) LinuxClient
!!! CND0310W: Klassische Netzwerkkonfiguration mit ifup wurde entdeckt. Die Konfiguration mit knetworkmanager ist wesentlich einfacher
--- 1 Warnungen gefunden
--- Gehe zu http://www.linux-tips-and-tricks.de/CND um detailiertere Hinweise zu den Fehlermeldungen/Warnungen zu bekommen und wie die Fehler beseitigt werden könnenF

==================================================================================================================
==================================================================================================================
*** uname -a
Linux rechenknecht 2.6.25.16-0.1-default #1 SMP 2008-08-21 00:34:25 +0200 x86_64 x86_64 x86_64 GNU/Linux
==================================================================================================================
*** SuSE release
openSUSE 11.0 (X86-64)
VERSION = 11.0
==================================================================================================================
*** /etc/resolv
search da.heim
nameserver 192.168.0.1
==================================================================================================================
*** /etc/hosts
127.0.0.1       localhost
127.0.0.2       rechenknecht.da.heim rechenknecht
192.168.0.10    rechenknecht rechenknecht
192.168.0.20    rechenknecht rechenknecht
==================================================================================================================
*** route
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 wlan0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 wlan0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 wlan0
==================================================================================================================
*** arp
Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.0.1              ether   **:**:**:**:**:**   C                     wlan0
==================================================================================================================
*** ifconfig
eth0      Link encap:Ethernet  Hardware Adresse **:**:**:**:**:**  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:16 
lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:57 errors:0 dropped:0 overruns:0 frame:0
          TX packets:57 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:18240 (17.8 Kb)  TX bytes:18240 (17.8 Kb)
wlan0     Link encap:Ethernet  Hardware Adresse **:**:**:**:**:**  
          inet Adresse:192.168.0.20  Bcast:192.168.0.255  Maske:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6446 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3417 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:2120129 (2.0 Mb)  TX bytes:623929 (609.3 Kb)
wmaster0  Link encap:UNSPEC  Hardware Adresse **-**-**-**-**-**-**-**-**-**-**-**-**-**-**-**  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
==================================================================================================================
*** ping tests
Ping of 195.135.220.3 OK
Ping of www.suse.de OK
==================================================================================================================
*** PCI devices
08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express [14e4:16fd] (rev 21)
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
==================================================================================================================
*** USB devices
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
==================================================================================================================
*** List of loaded modules
| ac                      | acpi_cpufreq            | aes_generic             | aes_x86_64               |
| af_packet               | ahci                    | arc4                    | ata_piix                 |
| battery                 | binfmt_misc             | bluetooth               | bnep                     |
| bridge                  | btusb                   | button                  | cdrom                    |
| cfg80211                | container               | cpufreq_conservative    | cpufreq_powersave        |
| cpufreq_userspace       | crypto_blkcipher        | dm_crypt                | dm_mod                   |
| dock                    | ecb                     | edd                     | ehci_hcd                 |
| ext3                    | fan                     | ff_memless              | firmware_class           |
| fuse                    | hci_usb                 | hid                     | ieee1394                 |
| intel_agp               | ip6_tables              | iptable_filter          | iptable_mangle           |
| iptable_nat             | ip_tables               | ipt_LOG                 | ipt_REJECT               |
| iTCO_vendor_support     | iTCO_wdt                | iwl3945                 | jbd                      |
| joydev                  | l2cap                   | libata                  | loop                     |
| mac80211                | mbcache                 | microcode               | mmc_core                 |
| nf_conntrack            | nf_conntrack_ipv4       | nf_conntrack_netbios_ns | nf_nat                   |
| ohci1394                | ohci_hcd                | output                  | parport                  |
| parport_pc              | pcmcia                  | pcmcia_core             | ppdev                    |
| processor               | rfcomm                  | rsrc_nonstatic          | rtc_cmos                 |
| rtc_core                | rtc_lib                 | scsi_mod                | sdhci                    |
| sd_mod                  | serio_raw               | sg                      | snd                      |
| snd_hda_intel           | snd_hwdep               | snd_mixer_oss           | snd_page_alloc           |
| snd_pcm                 | snd_pcm_oss             | snd_timer               | soundcore                |
| sr_mod                  | tg3                     | thermal                 | tifm_7xx1                |
| tifm_core               | uhci_hcd                | usbcore                 | usbhid                   |
| video                   | vmblock                 | vmmon                   | vmnet                    |
| wmi                     | x_tables                | xt_limit                | xt_physdev               |
| xt_pkttype              | xt_state                | xt_tcpudp               | yenta_socket             |
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-[earwd]* | egrep -v ".*=''"
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-eth0
BOOTPROTO='static'
IFPLUGD_PRIORITY='20'
IPADDR='192.168.0.10/24'
NAME='NetXtreme BCM5753M Gigabit Ethernet PCI Express'
STARTMODE='ifplugd'
USERCONTROL='no'
==================================================================================================================
*** cat /etc/sysconfig/network/ifcfg-wlan0
BOOTPROTO='static'
IPADDR='192.168.0.20/24'
NAME='PRO/Wireless 3945ABG Network Connection'
STARTMODE='auto'
USERCONTROL='no'
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_DEFAULT_KEY='0'
WIRELESS_ESSID='Funkwerk'
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Managed'
WIRELESS_POWER='no'
WIRELESS_WPA_PSK='@@@@@@'
==================================================================================================================
*** iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
wmaster0  no wireless extensions.
vmnet1    no wireless extensions.
vmnet8    no wireless extensions.
wlan0     IEEE 802.11g  ESSID:"Funkwerk"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: **:**:**:**:**:** 
          Bit Rate=36 Mb/s   Tx-Power=27 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Encryption key:@@ @@@-@@@@-@@@@-@@@@-@@@@-@@@@@@@ [4]
          Link Quality=59/100  Signal level=-72 dBm  Noise level=-98 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
==================================================================================================================
*** Actual date for bias of follwing greps
22:42:39 2008-09-24
==================================================================================================================
*** tail -n 300 /var/log/messages* | grep -i -A 5 'firmware'
==================================================================================================================
*** grep -i radio /var/log/boot.msg | tail -n 5
==================================================================================================================
*** dmesg | grep -i radio | tail -n 5
==================================================================================================================
*** tail -n 300 /var/log/messages* | -i firmware | tail -n 5
==================================================================================================================
*** ls -ls /lib/firmware
insgesamt 220
  4 -rw-r--r-- 1 root root    137  6. Jun 23:59 3CCFEM556.cis
  4 -rw-r--r-- 1 root root    134  6. Jun 23:59 3CXEM556.cis
  4 -rw-r--r-- 1 root root    109  6. Jun 23:59 COMpad2.cis
  4 -rw-r--r-- 1 root root     76  6. Jun 23:59 COMpad4.cis
  4 -rw-r--r-- 1 root root    136  6. Jun 23:59 DP83903.cis
  4 -rw-r--r-- 1 root root     53  6. Jun 23:59 E-CARD.cis
152 -rw-r--r-- 1 root root 149652  6. Jun 23:12 iwlwifi-3945-1.ucode
  4 -rw-r--r-- 1 root root    253  6. Jun 23:59 LA-PCM.cis
  4 -rw-r--r-- 1 root root   2109  6. Jun 23:12 LICENSE.iwlwifi-3945-ucode
  4 -rw-r--r-- 1 root root    107  6. Jun 23:59 MT5634ZLX.cis
  4 -rw-r--r-- 1 root root     54  6. Jun 23:59 NE2K.cis
  4 -rw-r--r-- 1 root root    210  6. Jun 23:59 PCMLM28.cis
  4 -rw-r--r-- 1 root root     68  6. Jun 23:59 PE-200.cis
  4 -rw-r--r-- 1 root root     74  6. Jun 23:59 PE520.cis
  8 -rwxr-xr-x 1 root root   5660  6. Jun 23:12 README.iwlwifi-3945-ucode
  4 -rw-r--r-- 1 root root     86  6. Jun 23:59 RS-COM-2P.cis
  4 -rw-r--r-- 1 root root     85  6. Jun 23:59 tamarack.cis
==================================================================================================================
*** ndiswrapper -l
==================================================================================================================
*** Active processes
wpa_supplicant:YES knetworkmanager:NO nm-applet:NO
==================================================================================================================
*** grep NETWORKMANAGER /etc/sysconfig/network/config
NETWORKMANAGER="no"
==================================================================================================================
*** grep -i persistent /etc/sysconfig/network/config
==================================================================================================================
*** grep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/70-persistent-net
/usr/bin/egrep: /etc/udev/rules.d/*net_persistent*: Datei oder Verzeichnis nicht gefunden
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="**:**:**:**:**:**", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
/etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="**:**:**:**:**:**", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
==================================================================================================================
*** grep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*
/etc/modprobe.conf:install eth0             /bin/true
/etc/modprobe.conf:install eth1             /bin/true
==================================================================================================================
*** iwlist scanning
                    ESSID:"Funkwerk"
                    Channel:11
                    Quality=55/100  Signal level=-75 dBm  Noise level=-98 dBm
                    Encryption key:on
                    IE: WPA Version 1
                    IE: IEEE 802.11i/WPA2 Version 1
==================================================================================================================
*** NWEliza states
IF:eth0  IP: IM:1
IF:wlan0  IP:192.168.0.20 IM:2
DI:2 dI:1 NIC:0 cNiC:2:0 NI:0 cNI:0 PNG:0 DNS:0 MTU:1 NISS:0 IP6:0 KM:0 WLW: 0 AP:1 
Zuletzt geändert von ollifa am 13. Okt 2008, 00:05, insgesamt 1-mal geändert.
Benutzeravatar
lOtz1009
Moderator
Moderator
Beiträge: 7180
Registriert: 23. Jan 2008, 09:51

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von lOtz1009 »

Wenn du den NetworkManager nutzen willst, dann stell das in Yast auch dementsprechend ein. Und alle anderen Einstellungen bzgl. der Netzwerke aus Yast entfernen. Dann sollte das auch funtionieren. Netzwerkeinstellungen per Yast UND Networkmanager verträgt sich nicht!
vi is an editor with two modes: one which destroys your input and the other which beeps at you.
Für meine Beiträge gilt:
Bild
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

lOtz hat geschrieben:Wenn du den NetworkManager nutzen willst, dann stell das in Yast auch dementsprechend ein. Und alle anderen Einstellungen bzgl. der Netzwerke aus Yast entfernen. Dann sollte das auch funtionieren. Netzwerkeinstellungen per Yast UND Networkmanager verträgt sich nicht!

Moin, lOtz!

Ich habe diese Anleitung schon durchgearbeitet, aber es funktioniert trotz Entfernen und Deaktivieren des Dienstes "network" in den Runleveln 3 & 5 nicht... - natürlich habe ich die Netzwerkkarten nach einem Neustart komplett neu eingerichtet und versucht, das Netzwerk über knetworkmanager neu einzurichten. Knetworkmanager stürtzt beim Klick auf Verbinden sofort ab... Das ist momentan aber nicht das Thema, ich werde es erst weiter versuchen, wenn die grundlegenden Netzwerk-Einstellungen funktionieren:

Netzwerk soll ohne Umwege / Workarounds nach dem Booten zur Verfügung stehen. Das ist verdammt wichtig, da auch noch andere Familienmitglieder an dem PC arbeiten... und die wissen halt nicht, was zu tun ist... ich im Moment auch nicht :ops:

Trotzdem Danke für Deinen Tip.

Gruß,
ollifa
Zuletzt geändert von ollifa am 25. Sep 2008, 12:13, insgesamt 2-mal geändert.
Benutzeravatar
lOtz1009
Moderator
Moderator
Beiträge: 7180
Registriert: 23. Jan 2008, 09:51

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von lOtz1009 »

Naja, anhand der Skriptausgabe sieht man dass du die Netzwerkkarten so eingerichtet hast, dass sie nicht mit dem NetworkManager eingerichtet werden sollen. Da wundert es mich auch nicht wenn das nicht geht. Du musst schon wissen ob du jetzt klassisch oder per NetworkManager "ins Netz" willst. Vorher rumzupfriemeln macht doppelt Arbeit.
vi is an editor with two modes: one which destroys your input and the other which beeps at you.
Für meine Beiträge gilt:
Bild
spoensche
Moderator
Moderator
Beiträge: 7587
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von spoensche »

Den Dienst Network nicht aus den Runleveln entfernen, weil da auch der Networkmanager gestartet wird. Bei Netzwerkkarten (kein WLAN) empfehle ich dir das ganze mit der traditionellen Methode ifup zu machen statt mit dem Networkmanager. Der Networkmanager ist für das WLAN zu gebrauchen, sonst eher weniger.
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

lOtz hat geschrieben:Naja, anhand der Skriptausgabe sieht man dass du die Netzwerkkarten so eingerichtet hast, dass sie nicht mit dem NetworkManager eingerichtet werden sollen. Da wundert es mich auch nicht wenn das nicht geht. Du musst schon wissen ob du jetzt klassisch oder per NetworkManager "ins Netz" willst. Vorher rumzupfriemeln macht doppelt Arbeit.
Ja, ich weiß, was ich will: dhcp und networkmanager, es geht aber nicht, was ich ja bereits im ersten Posting geschrieben habe: kNetworkmanager stürtzt beim Verbinden reproduzierbar ab. Immer. Ausnahmslos. Deshalb habe ich wieder auf die klassische Methode mit ifup umgestellt und statische IPs vergeben, was ohne Probleme funktioniert.

Das Problem ist doch jenes: das Netzwerk startet grundsätzlich nicht beim Hochfahren, obwohl auto für WLAN und ifplugd für LAN eingerichtet ist, sondern erst nach Absetzen des Befehls rcnetwork restart.

Es macht doch an diesem Punkt keinen Sinn, wenn das Netzwerk an sich schon nicht richtig funktioniert, zusätzlich noch mit dem Networkmanager herumzufummeln, oder sehe ich das falsch!?

ollifa
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

spoensche hat geschrieben:Den Dienst Network nicht aus den Runleveln entfernen, weil da auch der Networkmanager gestartet wird. Bei Netzwerkkarten (kein WLAN) empfehle ich dir das ganze mit der traditionellen Methode ifup zu machen statt mit dem Networkmanager. Der Networkmanager ist für das WLAN zu gebrauchen, sonst eher weniger.
Den Dienst habe ich nach Einrichten der Netzwerkkarten selbstverständlich re-aktiviert. Ja, ich möchte das Ganze gerne mit kNetworkmanager erledigen, da ich mich eher über WLAN als über LAN verbinde. Aber es geht halt nicht so, wie ich es mir vorstelle. Das Netzwerk an sich geht ja, nach dem Booten aber erst nach Absetzen von rcnetwork restart... :???:
Benutzeravatar
Heinz-Peter
Guru
Guru
Beiträge: 2435
Registriert: 24. Okt 2005, 14:04

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von Heinz-Peter »

Vielleicht ist was zu finden (eine Fehlermeldungen) unter YaST > Andere > Systemprotokoll anzeigen > /var/log/messages
Gruß
Edit: besser YaST > Andere > Startprotokoll anzeigen > /var/log/boot.msg
Man sollte viel häufiger einen Mutausbruch haben.
BS: Suse13.2/Ubuntu16.04LTS/Ubuntu18.04LTS/Leap15.2/Win, Prozessor: Pentium 4 550 (3,40 GHz, FSB800, Hyper-Threading) & Intel i3-7100U 2,4GHz, Grafikkarte: Nvidia Geforce 6610XL & Intel HD 620.
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

Jetzt habe ich zwischenzeitlich folgende Konfiguration ausprobiert: dhcp und ifup-Methode. Selbes Spiel, selbes Problem, will heißen: eine DHCP-Anfrage läuft ins Leere, da noch keine Netzwerkkarte aktiv scheint, erst nach einem rcnetwork restart bekommt der Rechner eine IP zugewiesen...

Für die Logfile-Analyzer unter Euch, ich kann da nur bedingt etwas herauslesen, gibt's hier mal etwas Futter, vielleicht kann da jemand etwas verdächtiges finden.


PS: Irgendwie raff' ich's grad nicht:
Datei-Upload schlägt fehl: Die Dateierweiterung txt ist nicht erlaubt.
Poste ich den ganzen Datei-Inhalt in diesen Beitrag, wird dieser als "Die eingegebene Nachricht ist zu kurz." angemahnt und das Eingabefeld wird geleert...
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

/var/log/messages

Code: Alles auswählen

Sep 25 16:38:07 hawkwind syslog-ng[2245]: syslog-ng version 1.6.12 starting
Sep 25 16:38:09 hawkwind SuSEfirewall2: batch committing...
Sep 25 16:38:10 hawkwind hcid[1705]: HCI dev 0 registered
Sep 25 16:38:10 hawkwind hcid[1705]: Starting SDP server
Sep 25 16:38:10 hawkwind hcid[1705]: Parsing /etc/bluetooth/network.conf failed: No such file or directory
Sep 25 16:38:10 hawkwind hcid[1705]: bridge pan0 created
Sep 25 16:38:10 hawkwind hcid[1705]: Registered manager path:/org/bluez/network
Sep 25 16:38:10 hawkwind hcid[1705]: Registered server path:/org/bluez/network/nap
Sep 25 16:38:10 hawkwind hcid[1705]: Registered server path:/org/bluez/network/gn
Sep 25 16:38:10 hawkwind hcid[1705]: Registered server path:/org/bluez/network/panu
Sep 25 16:38:10 hawkwind hcid[1705]: Registered manager path:/org/bluez/serial
Sep 25 16:38:10 hawkwind SuSEfirewall2: Firewall rules set to CLOSE.
Sep 25 16:38:10 hawkwind ifup: Service network not started and mode 'auto' -> skipping
Sep 25 16:38:10 hawkwind hcid[1705]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Sep 25 16:38:10 hawkwind hcid[1705]: Registered input manager path:/org/bluez/input
Sep 25 16:38:10 hawkwind hcid[1705]: HCI dev 0 up
Sep 25 16:38:10 hawkwind hcid[1705]: Device hci0 has been added
Sep 25 16:38:10 hawkwind hcid[1705]: Starting security manager 0
Sep 25 16:38:10 hawkwind hcid[1705]: Device hci0 has been activated
Sep 25 16:38:11 hawkwind firmware.sh[2733]: Cannot find  firmware file 'intel-ucode/06-0f-02'
Sep 25 16:38:12 hawkwind firmware.sh[2759]: Cannot find  firmware file 'intel-ucode/06-0f-02'
Sep 25 16:38:13 hawkwind kernel: klogd 1.4.1, log source = /proc/kmsg started.
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353485.551:2): operation="profile_load" name="/bin/ping" name2="default" pid=1916
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353485.583:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1926
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353485.710:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1928
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353485.766:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1943
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353485.866:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1957
Sep 25 16:38:13 hawkwind kernel: alsactl[1990]: segfault at 0 ip 7f863f7e6d50 sp 7fff486240c8 error 4 in libc-2.8.so[7f863f769000+14f000]
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353485.966:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1991
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353486.030:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2004
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353486.090:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2011
Sep 25 16:38:13 hawkwind kernel: type=1505 audit(1222353486.214:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2029
Sep 25 16:38:13 hawkwind kernel: NET: Registered protocol family 17
Sep 25 16:38:13 hawkwind kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 25 16:38:13 hawkwind kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Sep 25 16:38:13 hawkwind kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Sep 25 16:38:13 hawkwind kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Sep 25 16:38:13 hawkwind kernel: Bluetooth: BNEP filters: protocol multicast
Sep 25 16:38:13 hawkwind kernel: Bridge firewalling registered
Sep 25 16:38:13 hawkwind kernel: pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Sep 25 16:38:13 hawkwind kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Sep 25 16:38:13 hawkwind ifup: lo  
Sep 25 16:38:13 hawkwind ifup: lo  
Sep 25 16:38:13 hawkwind ifup: IP address: 127.0.0.1/8  
Sep 25 16:38:13 hawkwind ifup: 
Sep 25 16:38:13 hawkwind ifup: 
Sep 25 16:38:13 hawkwind ifup: IP address: 127.0.0.2/8  
Sep 25 16:38:13 hawkwind ifup: 
Sep 25 16:38:13 hawkwind ifup: pan0  
Sep 25 16:38:13 hawkwind ifup: No configuration found for pan0
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Found user 'avahi' (UID 102) and group 'avahi' (GID 104).
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Successfully dropped root privileges.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: avahi-daemon 0.6.22 starting up.
Sep 25 16:38:34 hawkwind auditd[4465]: Started dispatcher: /sbin/audispd pid: 4467
Sep 25 16:38:34 hawkwind auditd[4465]: Init complete, auditd 1.6.8 listening for events (startup state disable)
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Loading service file /etc/avahi/services/sftp-ssh.service.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Loading service file /etc/avahi/services/ssh.service.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Network interface enumeration completed.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Registering HINFO record with values 'X86_64'/'LINUX'.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Server startup complete. Host name is hawkwind.local. Local service cookie is 562524260.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Service "hawkwind" (/etc/avahi/services/ssh.service) successfully established.
Sep 25 16:38:34 hawkwind avahi-daemon[4459]: Service "SFTP File Transfer on hawkwind" (/etc/avahi/services/sftp-ssh.service) successfully established.
Sep 25 16:38:34 hawkwind audispd: af_unix plugin initialized
Sep 25 16:38:34 hawkwind audispd: audispd initialized with q_depth=64 and 1 active plugins
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'Language' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'ShowUsers' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'UseBackground' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'AllowShutdown' in section [X-:*-Core] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'AutoLoginEnable' in section [X-:0-Core] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:36 hawkwind avahi-dnsconfd[4532]: Successfully connected to Avahi daemon.
Sep 25 16:38:37 hawkwind powersaved[4521]: WARNING (continueEvent:250) Could not execute program /usr/lib/powersave/scripts for event daemon.scheme.change: No such file or directory
Sep 25 16:38:39 hawkwind /usr/sbin/cron[4615]: (CRON) STARTUP (V5.0)
Sep 25 16:38:40 hawkwind kernel: vmmon: module license 'unspecified' taints kernel.
Sep 25 16:38:40 hawkwind kernel: /dev/vmmon[4639]: VMCI: Driver initialized.
Sep 25 16:38:40 hawkwind kernel: /dev/vmmon[4639]: Module vmmon: registered with major=10 minor=165
Sep 25 16:38:40 hawkwind kernel: /dev/vmmon[4639]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
Sep 25 16:38:40 hawkwind kernel: /dev/vmmon[4639]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
Sep 25 16:38:40 hawkwind kernel: /dev/vmmon[4639]: Module vmmon: initialized
Sep 25 16:38:40 hawkwind kernel: ppdev: user-space parallel port driver
Sep 25 16:38:41 hawkwind kernel: /dev/vmnet: open called by PID 4711 (vmnet-bridge)
Sep 25 16:38:41 hawkwind kernel: /dev/vmnet: hub 0 does not exist, allocating memory.
Sep 25 16:38:41 hawkwind kernel: /dev/vmnet: port on hub 0 successfully opened
Sep 25 16:38:41 hawkwind kernel: bridge-eth0: peer interface eth0 not found, will wait for it to come up
Sep 25 16:38:41 hawkwind kernel: bridge-eth0: attached
Sep 25 16:38:41 hawkwind kernel: /dev/vmnet: open called by PID 4728 (vmnet-netifup)
Sep 25 16:38:41 hawkwind kernel: /dev/vmnet: hub 1 does not exist, allocating memory.
Sep 25 16:38:41 hawkwind kernel: /dev/vmnet: port on hub 1 successfully opened
Sep 25 16:38:41 hawkwind ifup: vmnet1  
Sep 25 16:38:41 hawkwind ifup: No configuration found for vmnet1
Sep 25 16:38:41 hawkwind vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0
Sep 25 16:38:41 hawkwind vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Sep 25 16:38:41 hawkwind vmnet-dhcpd: All rights reserved.
Sep 25 16:38:41 hawkwind vmnet-dhcpd: 
Sep 25 16:38:41 hawkwind vmnet-dhcpd: Please contribute if you find this software useful.
Sep 25 16:38:41 hawkwind vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Sep 25 16:38:41 hawkwind vmnet-dhcpd: 
Sep 25 16:38:41 hawkwind avahi-daemon[4459]: Joining mDNS multicast group on interface vmnet1.IPv4 with address 192.168.103.1.
Sep 25 16:38:41 hawkwind avahi-daemon[4459]: New relevant interface vmnet1.IPv4 for mDNS.
Sep 25 16:38:41 hawkwind avahi-daemon[4459]: Registering new address record for 192.168.103.1 on vmnet1.IPv4.
Sep 25 16:38:42 hawkwind vmnet-detect[4717]: NetDetectDaemonInit: No host policy file found. Not initializing filter.
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Configured subnet: 192.168.103.0
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Setting vmnet-dhcp IP address: 192.168.103.254
Sep 25 16:38:42 hawkwind kernel: /dev/vmnet: open called by PID 4727 (vmnet-dhcpd)
Sep 25 16:38:42 hawkwind kernel: /dev/vmnet: port on hub 1 successfully opened
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Recving on VNet/vmnet1/192.168.103.0
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Sending on VNet/vmnet1/192.168.103.0
Sep 25 16:38:42 hawkwind vmnet-detect[4717]: Unable to initialize the daemon
Sep 25 16:38:42 hawkwind kernel: /dev/vmnet: open called by PID 4799 (vmnet-netifup)
Sep 25 16:38:42 hawkwind kernel: /dev/vmnet: hub 8 does not exist, allocating memory.
Sep 25 16:38:42 hawkwind kernel: /dev/vmnet: port on hub 8 successfully opened
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Sep 25 16:38:42 hawkwind vmnet-dhcpd: All rights reserved.
Sep 25 16:38:42 hawkwind vmnet-dhcpd: 
Sep 25 16:38:42 hawkwind vmnet-dhcpd: Please contribute if you find this software useful.
Sep 25 16:38:42 hawkwind vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Sep 25 16:38:42 hawkwind vmnet-dhcpd: 
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Joining mDNS multicast group on interface vmnet8.IPv4 with address 172.16.71.1.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: New relevant interface vmnet8.IPv4 for mDNS.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Registering new address record for 172.16.71.1 on vmnet8.IPv4.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Withdrawing address record for 172.16.71.1 on vmnet8.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Leaving mDNS multicast group on interface vmnet8.IPv4 with address 172.16.71.1.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Interface vmnet8.IPv4 no longer relevant for mDNS.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Joining mDNS multicast group on interface vmnet8.IPv4 with address 172.16.71.1.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: New relevant interface vmnet8.IPv4 for mDNS.
Sep 25 16:38:42 hawkwind avahi-daemon[4459]: Registering new address record for 172.16.71.1 on vmnet8.IPv4.
Sep 25 16:38:42 hawkwind ifup: vmnet8  
Sep 25 16:38:42 hawkwind ifup: No configuration found for vmnet8
Sep 25 16:38:43 hawkwind vmnet-dhcpd: Configured subnet: 172.16.71.0
Sep 25 16:38:43 hawkwind vmnet-dhcpd: Setting vmnet-dhcp IP address: 172.16.71.254
Sep 25 16:38:43 hawkwind kernel: /dev/vmnet: open called by PID 4810 (vmnet-dhcpd)
Sep 25 16:38:43 hawkwind vmnet-dhcpd: Recving on VNet/vmnet8/172.16.71.0
Sep 25 16:38:43 hawkwind vmnet-dhcpd: Sending on VNet/vmnet8/172.16.71.0
Sep 25 16:38:43 hawkwind kernel: /dev/vmnet: port on hub 8 successfully opened
Sep 25 16:38:43 hawkwind kernel: /dev/vmnet: open called by PID 4870 (vmnet-natd)
Sep 25 16:38:43 hawkwind kernel: /dev/vmnet: port on hub 8 successfully opened
Sep 25 16:38:43 hawkwind SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Sep 25 16:38:43 hawkwind SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
Sep 25 16:38:43 hawkwind SuSEfirewall2: using default zone 'ext' for interface pan0
Sep 25 16:38:43 hawkwind SuSEfirewall2: using default zone 'ext' for interface vmnet1
Sep 25 16:38:43 hawkwind SuSEfirewall2: using default zone 'ext' for interface vmnet8
Sep 25 16:38:43 hawkwind SuSEfirewall2: using default zone 'ext' for interface wmaster0
Sep 25 16:38:43 hawkwind SuSEfirewall2: batch committing...
Sep 25 16:38:44 hawkwind SuSEfirewall2: Firewall rules successfully set
Sep 25 16:38:44 hawkwind kernel: bootsplash: status on console 0 changed to on
Sep 25 16:39:50 hawkwind hcid[1705]: Default passkey agent (:1.16, /org/kde/kbluetooth_1234) registered
Sep 25 16:39:50 hawkwind hcid[1705]: Default authorization agent (:1.16, /org/kde/kbluetooth_auth_1234) registered
Sep 25 16:39:53 hawkwind kernel: CPU0 attaching NULL sched-domain.
Sep 25 16:39:53 hawkwind kernel: CPU1 attaching NULL sched-domain.
Sep 25 16:39:53 hawkwind kernel: CPU0 attaching sched-domain:
Sep 25 16:39:53 hawkwind kernel: domain 0: span 00000000,00000000,00000000,00000003
Sep 25 16:39:53 hawkwind kernel: groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
Sep 25 16:39:53 hawkwind kernel: domain 1: span 00000000,00000000,00000000,00000003
Sep 25 16:39:53 hawkwind kernel: groups: 00000000,00000000,00000000,00000003
Sep 25 16:39:53 hawkwind kernel: CPU1 attaching sched-domain:
Sep 25 16:39:53 hawkwind kernel: domain 0: span 00000000,00000000,00000000,00000003
Sep 25 16:39:53 hawkwind kernel: groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
Sep 25 16:39:53 hawkwind kernel: domain 1: span 00000000,00000000,00000000,00000003
Sep 25 16:39:53 hawkwind kernel: groups: 00000000,00000000,00000000,00000003
Sep 25 16:40:12 hawkwind su: (to root) ollifa on /dev/pts/2
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

/var/log/boot.msg

Code: Alles auswählen

Inspecting /boot/System.map-2.6.25.16-0.1-default
Loaded 28953 symbols from /boot/System.map-2.6.25.16-0.1-default.
Symbols match kernel version 2.6.25.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.25.16-0.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-08-21 00:34:25 +0200
<6>Command line: root=/dev/disk/by-label/openSuSE-root resume=/dev/sda2 splash=silent vga=0x355
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 00000000d7fd0000 (usable)
<6> BIOS-e820: 00000000d7fd0000 - 00000000d7fe5600 (reserved)
<6> BIOS-e820: 00000000d7fe5600 - 00000000d7ff8000 (ACPI NVS)
<6> BIOS-e820: 00000000d7ff8000 - 00000000d8000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<6> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
<6> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
<6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
<6> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
<7>Entering add_active_range(0, 256, 884688) 1 entries of 3200 used
<6>end_pfn_map = 1048576
<6>DMI 2.4 present.
<4>ACPI: RSDP 000F78E0, 0024 (r2 HP    )
<4>ACPI: XSDT D7FE57C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
<4>ACPI: FACP D7FE5684, 00F4 (r4 HP     309F            3 HP          1)
<4>ACPI: DSDT D7FE5ACC, 10A75 (r1 HP       nc9700    10000 MSFT  100000E)
<4>ACPI: FACS D7FF7E80, 0040
<4>ACPI: SLIC D7FE5844, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
<4>ACPI: HPET D7FE59BC, 0038 (r1 HP     309F            1 HP          1)
<4>ACPI: APIC D7FE59F4, 0068 (r1 HP     309F            1 HP          1)
<4>ACPI: MCFG D7FE5A5C, 003C (r1 HP     309F            1 HP          1)
<4>ACPI: TCPA D7FE5A98, 0032 (r2 HP     309F            1 HP          1)
<4>ACPI: SSDT D7FF6541, 0059 (r1 HP       HPQNLP        1 MSFT  100000E)
<4>ACPI: SSDT D7FF659A, 0326 (r1 HP       HPQSAT        1 MSFT  100000E)
<4>ACPI: SSDT D7FF70D3, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
<4>ACPI: SSDT D7FF7332, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
<4>ACPI: SSDT D7FF73D8, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
<5>ACPI: DMI detected: Hewlett-Packard
<6>No NUMA configuration found
<6>Faking a node at 0000000000000000-00000000d7fd0000
<7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
<7>Entering add_active_range(0, 256, 884688) 1 entries of 3200 used
<6>Bootmem setup node 0 0000000000000000-00000000d7fd0000
<6>  NODE_DATA [000000000000d000 - 0000000000014fff]
<6>  bootmap [0000000000015000 -  000000000002ffff] pages 1b
<6>early res: 0 [0-fff] BIOS data page
<6>early res: 1 [6000-7fff] SMP_TRAMPOLINE
<6>early res: 2 [200000-8b5bd7] TEXT DATA BSS
<6>early res: 3 [37a4e000-37fef680] RAMDISK
<6>early res: 4 [9fc00-a0bff] EBDA
<6>early res: 5 [8000-cfff] PGTABLE
<6>No mptable found.
<7> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
<7> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
<7> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
<7> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
<7> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
<7> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
<7> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
<7> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
<7> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
<7> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
<7> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
<7> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
<7> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
<7> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
<7> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
<7> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
<7> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
<7> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
<7> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
<7> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
<7> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
<7> [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
<7> [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
<7> [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
<4>Zone PFN ranges:
<4>  DMA             0 ->     4096
<4>  DMA32        4096 ->  1048576
<4>  Normal    1048576 ->  1048576
<4>Movable zone start PFN for each node
<4>early_node_map[2] active PFN ranges
<4>    0:        0 ->      159
<4>    0:      256 ->   884688
<7>On node 0 totalpages: 884591
<7>  DMA zone: 56 pages used for memmap
<7>  DMA zone: 1726 pages reserved
<7>  DMA zone: 2217 pages, LIFO batch:0
<7>  DMA32 zone: 12039 pages used for memmap
<7>  DMA32 zone: 868553 pages, LIFO batch:31
<7>  Normal zone: 0 pages used for memmap
<7>  Movable zone: 0 pages used for memmap
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>Processor #0 (Bootup-CPU)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>Processor #1
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Setting APIC routing to flat
<6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
<6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
<6>Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000)
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<6>PERCPU: Allocating 47936 bytes of per cpu data
<4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 870770
<4>Policy zone: DMA32
<5>Kernel command line: root=/dev/disk/by-label/openSuSE-root resume=/dev/sda2 splash=silent vga=0x355
<6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>Extended CMOS year: 2000
<6>TSC calibrated against PM_TIMER
<6>time.c: Detected 1828.754 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Checking aperture...
<7>Calgary: detecting Calgary via BIOS EBDA area
<7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
<6>Memory: 3476148k/3538752k available (2367k kernel code, 62216k reserved, 1919k data, 404k init)
<7>CPA: page pool initialized 1 of 1 pages preallocated
<7>hpet clockevent registered
<4>Calibrating delay using timer specific routine.. 3661.74 BogoMIPS (lpj=7323496)
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized <NULL>
<6>AppArmor: Registered secondary security module capability
<6>Capability LSM initialized as secondary
<6>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>CPU 0/0 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<7>CPU0: Thermal monitoring handled by SMI
<6>using mwait in idle threads.
<6>ACPI: Core revision 20070126
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 1271 Objects with 105 Devices 405 Methods 41 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0003) - 17 Objects with 4 Devices 5 Methods 0 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0006) - 14 Objects with 0 Devices 5 Methods 0 Regions
<4> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<6>Using local APIC timer interrupts.
<7>APIC timer calibration result 10390645
<6>Detected 10.390 MHz APIC timer.
<6>Booting processor 1/2 APIC 0x1
<4>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 3657.54 BogoMIPS (lpj=7315096)
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>CPU 1/1 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<6>CPU1: Thermal monitoring enabled (TM2)
<4>Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 02
<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
<6>Brought up 2 CPUs
<7>CPU0 attaching sched-domain:
<7> domain 0: span 00000000,00000000,00000000,00000003
<7>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
<7>  domain 1: span 00000000,00000000,00000000,00000003
<7>   groups: 00000000,00000000,00000000,00000003
<7>CPU1 attaching sched-domain:
<7> domain 0: span 00000000,00000000,00000000,00000003
<7>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
<7>  domain 1: span 00000000,00000000,00000000,00000003
<7>   groups: 00000000,00000000,00000000,00000003
<6>net_namespace: 1016 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<3>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
<3>PCI: Not using MMCONFIG.
<6>PCI: Using configuration type 1
<4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 7 Runtime GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
<4>Completing Region/Field/Buffer/Package initialization:...............................................................................................................................................................................
<4>Initialized 34/41 Regions 0/0 Fields 64/65 Buffers 77/86 Packages (1324 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:........
<4>Executed 8 _INI methods requiring 3 _STA executions (examined 119 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
<6>ACPI: EC: driver started in interrupt mode
<6>ACPI: PCI Root Bridge [C003] (0000:00)
<6>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
<6>pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C085._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C09A._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C103._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C113._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C119._PRT]
<6>ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
<6>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
<6>ACPI: PCI Interrupt Link [C111] (IRQs 10 *11)
<6>ACPI: PCI Interrupt Link [C112] (IRQs 10 11) *5
<6>ACPI: PCI Interrupt Link [C125] (IRQs *10 11)
<6>ACPI: PCI Interrupt Link [C126] (IRQs *10 11)
<6>ACPI: PCI Interrupt Link [C127] (IRQs 10 *11)
<4>ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
<6>ACPI: Power Resource [C224] (on)
<6>ACPI: Power Resource [C22C] (on)
<6>ACPI: Power Resource [C334] (off)
<6>ACPI: Power Resource [C335] (off)
<6>ACPI: Power Resource [C336] (off)
<6>ACPI: Power Resource [C337] (off)
<6>ACPI: Power Resource [C338] (off)
<6>ACPI: Power Resource [C339] (off)
<6>ACPI: Power Resource [C33A] (off)
<6>ACPI: Power Resource [C33B] (off)
<6>ACPI: Power Resource [C33C] (off)
<6>ACPI: Power Resource [C33D] (off)
<6>ACPI: Power Resource [C33E] (off)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 14 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<6>PCI-GART: No AMD northbridge found.
<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>hpet0: 3 64-bit timers, 14318180 Hz
<6>AppArmor: AppArmor Filesystem Enabled 
<4>ACPI: RTC can wake from S4
<7>Switched to high resolution mode on CPU 0
<7>Switched to high resolution mode on CPU 1
<6>system 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
<6>system 00:00: iomem range 0x100000-0xd7ffffff could not be reserved
<6>system 00:0a: ioport range 0x500-0x55f has been reserved
<6>system 00:0a: ioport range 0x800-0x80f has been reserved
<6>system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
<6>system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
<6>system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:0c: ioport range 0x1000-0x107f has been reserved
<6>system 00:0c: ioport range 0x1100-0x113f has been reserved
<6>system 00:0c: ioport range 0x1200-0x121f has been reserved
<6>system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
<6>system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
<6>system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
<6>system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
<6>system 00:0c: iomem range 0xfed90000-0xfed9afff could not be reserved
<6>system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
<6>system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
<6>PCI: Bridge: 0000:00:01.0
<6>  IO window: 4000-4fff
<6>  MEM window: 0xf4600000-0xf46fffff
<6>  PREFETCH window: 0x00000000e0000000-0x00000000efffffff
<6>PCI: Bridge: 0000:00:1c.0
<6>  IO window: disabled.
<6>  MEM window: 0xf4100000-0xf41fffff
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.1
<6>  IO window: disabled.
<6>  MEM window: 0xf4000000-0xf40fffff
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.3
<6>  IO window: 2000-3fff
<6>  MEM window: 0xf0000000-0xf3ffffff
<6>  PREFETCH window: disabled.
<4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
<6>  IO window: 0x00006000-0x000060ff
<6>  IO window: 0x00006400-0x000064ff
<6>  PREFETCH window: 0xdc000000-0xdfffffff
<6>  MEM window: 0x100000000-0x103ffffff
<6>PCI: Bridge: 0000:00:1e.0
<6>  IO window: 6000-6fff
<6>  MEM window: 0xf4200000-0xf45fffff
<6>  PREFETCH window: 0x00000000dc000000-0x00000000dfffffff
<6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>TCP reno registered
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5765k freed
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1222353467.889:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>pci 0000:01:00.0: Boot video device
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:01.0:pcie00]
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>Allocate Port Service[0000:00:1c.0:pcie02]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<7>Allocate Port Service[0000:00:1c.1:pcie02]
<7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.3:pcie00]
<7>Allocate Port Service[0000:00:1c.3:pcie02]
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20001080000, using 7776k, total 16384k
<6>vesafb: mode is 1152x864x16, linelength=2304, pages=7
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 153527 bytes
<6>bootsplash: ...found (1152x864, 183387 bytes, v3).
<4>Console: switching to colour frame buffer device 140x50
<6>fb0: VESA VGA frame buffer device
<7>hpet_resources: 0xfed00000 is busy
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.103
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>PNP: PS/2 Controller [PNP0303:C221,PNP0f13:C222] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /devices/platform/pcspkr/input/input0
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>NET: Registered protocol family 1
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 404k freed
<6>Write protecting the kernel read-only data: 1680k
<4>ACPI: SSDT D7FF6988, 01FB (r1 HP      Cpu0Ist     3000 INTL 20060317)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 00E5) - 6 Objects with 0 Devices 4 Methods 0 Regions
<4>ACPI: SSDT D7FF6C08, 04CB (r1 HP      Cpu0Cst     3001 INTL 20060317)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 00E6) - 1 Objects with 0 Devices 1 Methods 0 Regions
<7>Monitor-Mwait will be used to enter C-1 state
<7>Monitor-Mwait will be used to enter C-2 state
<6>ACPI: CPU0 (power states: C1[C1] C2[C2])
<6>ACPI: ACPI0007:00 is registered as cooling_device0
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<4>ACPI: SSDT D7FF68C0, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 00F0) - 4 Objects with 0 Devices 4 Methods 0 Regions
<4>ACPI: SSDT D7FF6B83, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
<4>Parsing all Control Methods:
<4>Table [SSDT](id 00F1) - 1 Objects with 0 Devices 1 Methods 0 Regions
<6>ACPI: CPU1 (power states: C1[C1] C2[C2])
<4>Marking TSC unstable due to TSC halts in idle
<6>ACPI: ACPI0007:01 is registered as cooling_device1
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<6>ACPI: LNXTHERM:01 is registered as thermal_zone0
<6>ACPI: Thermal Zone [TZ0] (34 C)
<6>ACPI: LNXTHERM:02 is registered as thermal_zone1
<6>ACPI: Thermal Zone [TZ1] (38 C)
<6>ACPI: LNXTHERM:03 is registered as thermal_zone2
<6>ACPI: Thermal Zone [TZ2] (34 C)
<6>ACPI: LNXTHERM:04 is registered as thermal_zone3
<6>ACPI: Thermal Zone [TZ3] (26 C)
<6>ACPI: LNXTHERM:05 is registered as thermal_zone4
<6>ACPI: Thermal Zone [TZ4] (28 C)
<6>ACPI: LNXTHERM:06 is registered as thermal_zone5
<6>ACPI: Thermal Zone [TZ5] (71 C)
<6>No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>ahci 0000:00:1f.2: version 3.0
<6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 21
<6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
<6>serio: Synaptics pass-through port at isa0060/serio4/input0
<6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
<6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
<6>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>scsi2 : ahci
<6>scsi3 : ahci
<6>ata1: SATA max UDMA/133 abar m1024@0xf4705000 port 0xf4705100 irq 4347
<6>ata2: DUMMY
<6>ata3: DUMMY
<6>ata4: DUMMY
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
<6>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
<7>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
<7>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
<6>ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
<6>ata1.00: 234441648 sectors, multi 16: LBA48 
<6>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
<6>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
<7>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
<7>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
<6>ata1.00: configured for UDMA/100
<6>ata1.00: configured for UDMA/100
<6>ata1: EH complete
<5>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
<7>ata_piix 0000:00:1f.1: version 2.12
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
<6>scsi4 : ata_piix
<6>scsi5 : ata_piix
<6>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
<6>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
<6>ata5.00: ATAPI: PIONEER DVDRW   DVR-K17, 1.05, max MWDMA2
<6>ata5.00: configured for MWDMA2
<7>ata6: port disabled. ignoring.
<5>scsi 4:0:0:0: CD-ROM            PIONEER  DVDRW   DVR-K17  1.05 PQ: 0 ANSI: 5
<4>ACPI: Transitioning device [C33F] to D3
<6>ACPI: PNP0C0B:00 is registered as cooling_device2
<6>ACPI: Fan [C33F] (off)
<4>ACPI: Transitioning device [C340] to D3
<6>ACPI: PNP0C0B:01 is registered as cooling_device3
<6>ACPI: Fan [C340] (off)
<4>ACPI: Transitioning device [C341] to D3
<6>ACPI: PNP0C0B:02 is registered as cooling_device4
<6>ACPI: Fan [C341] (off)
<4>ACPI: Transitioning device [C342] to D3
<6>ACPI: PNP0C0B:03 is registered as cooling_device5
<6>ACPI: Fan [C342] (off)
<4>ACPI: Transitioning device [C343] to D3
<6>ACPI: PNP0C0B:04 is registered as cooling_device6
<6>ACPI: Fan [C343] (off)
<4>ACPI: Transitioning device [C344] to D3
<6>ACPI: PNP0C0B:05 is registered as cooling_device7
<6>ACPI: Fan [C344] (off)
<4>ACPI: Transitioning device [C345] to D3
<6>ACPI: PNP0C0B:06 is registered as cooling_device8
<6>ACPI: Fan [C345] (off)
<4>ACPI: Transitioning device [C346] to D3
<6>ACPI: PNP0C0B:07 is registered as cooling_device9
<6>ACPI: Fan [C346] (off)
<4>ACPI: Transitioning device [C347] to D3
<6>ACPI: PNP0C0B:08 is registered as cooling_device10
<6>ACPI: Fan [C347] (off)
<4>ACPI: Transitioning device [C348] to D3
<6>ACPI: PNP0C0B:09 is registered as cooling_device11
<6>ACPI: Fan [C348] (off)
<4>ACPI: Transitioning device [C349] to D3
<6>ACPI: PNP0C0B:0a is registered as cooling_device12
<6>ACPI: Fan [C349] (off)
<6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>USB Universal Host Controller Interface driver v3.0
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4704000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<4>Driver 'sd' needs updating - please use bus_type methods
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<5>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<4> sda1 sda2 sda3 sda4 <<6>usb usb1: Product: EHCI Host Controller
<4> sda5<6>usb usb1: Manufacturer: Linux 2.6.25.16-0.1-default ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.7
<4> sda6<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
<4> sda7 >
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<3>hub 1-0:1.0: unable to enumerate USB device on port 1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.25.16-0.1-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.0
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<3>hub 1-0:1.0: unable to enumerate USB device on port 5
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.25.16-0.1-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:1d.1
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb 2-1: new full speed USB device using uhci_hcd and address 2
<6>usb usb4: Manufacturer: Linux 2.6.25.16-0.1-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.2
<6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
<6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-1: New USB device found, idVendor=03f0, idProduct=171d
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: HP Integrated Module
<6>usb 2-1: Manufacturer: Broadcom Corp
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.25.16-0.1-default uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.3
<6>PM: Starting manual resume from disk
<6>usb 4-1: new low speed USB device using uhci_hcd and address 2
<6>usb 4-1: configuration #1 chosen from 1 choice
<6>usb 4-1: New USB device found, idVendor=046d, idProduct=c50e
<6>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 4-1: Product: USB RECEIVER
<6>usb 4-1: Manufacturer: Logitech
<6>usbcore: registered new interface driver hiddev
<6>input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
<6>input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.2-1
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 4:0:0:0: Attached scsi generic sg1 type 5
<6>tg3.c:v3.91 (April 18, 2008)
<6>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:08:00.0 to 64
<6>eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:f1:ea:27
<6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
<6>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
<6>Bluetooth: Core ver 2.11
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>iTCO_vendor_support: vendor-support=0
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
<6>ACPI: Power Button (FF) [PWRF]
<6>ACPI: Battery Slot [C1C5] (battery present)
<6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
<6>ACPI: Sleep Button (CM) [C24D]
<6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
<6>ACPI: Lid Switch [C245]
<6>ACPI: Battery Slot [C1C4] (battery absent)
<6>ACPI: WMI: Mapper loaded
<6>ACPI: AC Adapter [C1C3] (on-line)
<6>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month, y3k
<6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
<4>Driver 'sr' needs updating - please use bus_type methods
<6>ACPI: PCI Interrupt 0000:02:06.2[A] -> GSI 18 (level, low) -> IRQ 18
<6>ACPI: Video Device [C130] (multi-head: yes  rom: no  post: no)
<6>Bluetooth: HCI USB driver ver 2.9
<6>usbcore: registered new interface driver hci_usb
<4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 4:0:0:0: Attached scsi CD-ROM sr0
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0)
<6>ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 22
<6>mmc0: SDHCI at 0xf4209000 irq 22 PIO
<6>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[f4201000-f42017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
<6>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
<6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>Yenta: CardBus bridge found at 0000:02:06.0 [103c:309f]
<6>Yenta: Enabling burst memory read transactions
<6>Yenta: Using INTVAL to route CSC interrupts to PCI
<6>Yenta: Routing CardBus interrupts to PCI
<6>Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
<6>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
<6>iwl3945: Copyright(c) 2003-2007 Intel Corporation
<6>Bluetooth: Generic Bluetooth USB driver ver 0.1
<6>usbcore: registered new interface driver btusb
<3>intel_rng: FWH not detected
<6>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
<6>Socket status: 30000006
<6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
<6>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
<6>pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff
<6>pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdfffffff
<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
<6>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:10:00.0 to 64
<6>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
<6>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
<7>phy0: Selected rate control algorithm 'iwl-3945-rs'
<6>ACPI: PCI interrupt for device 0000:10:00.0 disabled
<6>alsactl[1665]: segfault at 0 ip 7f6d2100dd50 sp 7fff29e4d4f8 error 4 in libc-2.8.so[7f6d20f90000+14f000]
<6>Bluetooth: L2CAP ver 2.9
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.8
<6>Adding 4195792k swap on /dev/sda2.  Priority:75 extents:1 across:4195792k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda3, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda5, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Sep 25 16:37:55 2008

done
Starting udevd: udevd-event[1664]: run_program: '/usr/sbin/alsactl' abnormal exit

done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda1 is already mounted on /

Setting up the hardware clockdone
Activating device mapper...
done
Waiting for tmpfs . no more events
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
openSuSE-home: clean, 7705/394352 files, 515643/1574370 blocks
openSuSE-var: clean, 4820/57728 files, 84059/230572 blocks
openSuSE-tmp: clean, 545/57728 files, 8833/230572 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
/dev/sda5 on /var type ext3 (rw,acl,user_xattr)
/dev/sda6 on /tmp type ext3 (rw,acl,user_xattr)
tmpfs on /dev/shm type tmpfs (rw)
done ...unused
Loading fuse module done
Mounting fuse control filesystemdone
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Activating remaining swap-devices in /etc/fstab...
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor profiles <notice>killproc: kill(723,29)
Creating /var/log/boot.msg
doneEnabling dynamic IP patchdone
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Retry device configuration: done
udevd-event[1989]: run_program: '/usr/sbin/alsactl' abnormal exit

done
Setting up hostname 'hawkwind'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(723,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Thu Sep 25 16:38:06 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
Starting resource managerdone
Starting D-Bus daemonStarting irqbalance done
Starting java.binfmt_misc done
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/sbin/acpid ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting acpid done
acpid: starting up


acpid: 1 rule loaded


<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PWD=/ PREVLEVEL=N LINES=50 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
done
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
Loading CPUFreq modulesdone
Starting HAL daemonLoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
doneStarting Firewall Initialization (phase 1 of 2) done
Initializing random number generatordone
Searching for unresolved configuration filesdone
Please check the following files (see /var/adm/rpmconfigcheck):
    /opt/kde3/share/config/kdm/kdmrc.rpmnew
    /usr/share/fonts/encodings/encodings.dir.rpmsave
    /usr/share/fonts/misc/fonts.dir.rpmsave
Checking/updating CPU microcode done
done
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    pan0      
              No configuration found for pan0
unusedWaiting for mandatory devices:  eth0 wlan0 __NSC__
19 17 16 14 12 11 9 8 7 5 4 2 1 
    eth0      device: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21)
    eth0      ifplugd is not running
    eth0      is down
failed    eth0      interface could not be set up until now
failed    wlan0     device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    wlan0     is down
failed    wlan0     interface could not be set up until now
failedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .failed
<notice>checkproc: /usr/sbin/hcid 1705
done
Starting bluetooth:  hcid hid2hci rfcommdone
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting auditd done
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=50 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde3 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting Avahi daemon.done
Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
done
Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
done
Initializing SMTP port (sendmail)<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Name=MTA,Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
<notice>startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -qp1m ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/sendmail ]
done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting spamd <notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d -c -L -r /var/run/spamd.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=140 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x355 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1152x864.cfg PREVLEVEL=N LINES=50 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-label/openSuSE-root _=/sbin/startproc DAEMON=/usr/sbin/spamd ]
done
Starting VMware services:
   Virtual machine monitor done
   Blocking file system: done
   Virtual ethernet done
   Bridged networking on /dev/vmnet0 done
   Host network detection done
   Host-only networking on /dev/vmnet1 (background) done
   DHCP server on /dev/vmnet1 done
   Host-only networking on /dev/vmnet8 (background) done
   DHCP server on /dev/vmnet8 done
   NAT service on /dev/vmnet8 done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
<notice>killproc: kill(2117,3)
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

/var/log/warn

Code: Alles auswählen

Sep 25 16:38:10 hawkwind hcid[1705]: Parsing /etc/bluetooth/network.conf failed: No such file or directory
Sep 25 16:38:10 hawkwind hcid[1705]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Sep 25 16:38:13 hawkwind kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Sep 25 16:38:13 hawkwind kernel: pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Sep 25 16:38:13 hawkwind ifup:               No configuration found for pan0
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'Language' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'ShowUsers' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'UseBackground' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'AllowShutdown' in section [X-:*-Core] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:35 hawkwind kdm_config[4489]: Multiple occurrences of key 'AutoLoginEnable' in section [X-:0-Core] of /opt/kde3/share/config/kdm/kdmrc
Sep 25 16:38:37 hawkwind powersaved[4521]: WARNING (continueEvent:250) Could not execute program /usr/lib/powersave/scripts for event daemon.scheme.change: No such file or directory
Sep 25 16:38:40 hawkwind kernel: vmmon: module license 'unspecified' taints kernel.
Sep 25 16:38:41 hawkwind ifup:               No configuration found for vmnet1
Sep 25 16:38:42 hawkwind ifup:               No configuration found for vmnet8
Sep 25 16:38:43 hawkwind SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
Benutzeravatar
Heinz-Peter
Guru
Guru
Beiträge: 2435
Registriert: 24. Okt 2005, 14:04

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von Heinz-Peter »

Hier die Zeilen aus /var/log/boot.msg

Code: Alles auswählen

<6>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
6>iwl3945: Copyright(c) 2003-2007 Intel Corporation
<6>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
<6>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
<7>phy0: Selected rate control algorithm 'iwl-3945-rs'

failed    wlan0     device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    wlan0     is down
Die Schnittstelle wlan0 ist wie Du auch vermutet hast ausgeschaltet. Wenn Du dort ein dual System hast (Linux und Windows) dann habe ich was gelesen das Windows versetzt die Karte in ein Tiefschlaf. Ich kann mir aber das nicht erklären. Wie ist das wenn Du die Karte aktivierst und dann machst Neustart (aber in Linux rein)? Ist die Karte dann wieder ausgeschaltet?
Gruß
Edit: Versuche vielleicht so:
Mögliche Lösung: Gehe ins Verzeichnis /etc und öffne die Datei modprobe.conf.local mit einem Editor z.B. Kwrite und schreibe rein

Code: Alles auswählen

alias wlan0 iwl3945 
Wenn das Modul iwl3945 heißt (prüfe vorher mit: modinfo iwl3945 ) dann abspeichern und den PC Neustarten.
Man sollte viel häufiger einen Mutausbruch haben.
BS: Suse13.2/Ubuntu16.04LTS/Ubuntu18.04LTS/Leap15.2/Win, Prozessor: Pentium 4 550 (3,40 GHz, FSB800, Hyper-Threading) & Intel i3-7100U 2,4GHz, Grafikkarte: Nvidia Geforce 6610XL & Intel HD 620.
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

Neee, kein Dualboot mehr ;) M$ läuft nur noch in einer VM
Also das mit modprobe.conf.local werde ich sofort testen, bis gleich.


EDIT: bringt keinerlei Änderung... nach wie vor selbes Spiel.
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

Heinz-Peter hat geschrieben:Hier die Zeilen aus /var/log/boot.msg

Code: Alles auswählen

<6>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
6>iwl3945: Copyright(c) 2003-2007 Intel Corporation
<6>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
<6>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
<7>phy0: Selected rate control algorithm 'iwl-3945-rs'

failed    wlan0     device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    wlan0     is down
Die Schnittstelle wlan0 ist wie Du auch vermutet hast ausgeschaltet. Wenn Du dort ein dual System hast (Linux und Windows) dann habe ich was gelesen das Windows versetzt die Karte in ein Tiefschlaf. Ich kann mir aber das nicht erklären. Wie ist das wenn Du die Karte aktivierst und dann machst Neustart (aber in Linux rein)? Ist die Karte dann wieder ausgeschaltet?
Gruß
Edit: Versuche vielleicht so:
Mögliche Lösung: Gehe ins Verzeichnis /etc und öffne die Datei modprobe.conf.local mit einem Editor z.B. Kwrite und schreibe rein

Code: Alles auswählen

alias wlan0 iwl3945 
Wenn das Modul iwl3945 heißt (prüfe vorher mit: modinfo iwl3945 ) dann abspeichern und den PC Neustarten.
Also die Karte ist nicht ausgeschaltet, und ein lsmod | grep iwl sagt mir, dass das Modul bei Starten geladen wurde. Spielt evtl. die Reihenfolge der Bootscripten eine Rolle? Ich wüßte jetzt nicht genau, welches Script noch vor dem Netzwerk-Script gestartet werden sollte, damit beim Netzwerkstart alles reibungslos läuft. Und außerdem gibt's doch auch Abhängikeiten untereinander: de- bzw. re-aktiviere ich einen Dienst, dann ändert SuSE dementsprechend abhängige Dienste auch... :???: also irgendwo scheint auf jeden Fall etwas beim Update "zerschossen" worden zu sein.

offtopic:
Nur noch ein Beispiel, was ich zum Glück gleich bemerkt habe und dementsprechend reagieren konnte: gestern kMail-Update gefahren; das Ende vom Lied:
alle POP3-Filterregeln wurden gelöscht! und popfilters=0 gesetzt,alle anderen Einstellung blieben erhalten. Ein sinnfreies wie unverschämtes Eingreifen in die User-Konfiguration.
Benutzeravatar
SUSEDJAlex
Advanced Hacker
Advanced Hacker
Beiträge: 863
Registriert: 18. Apr 2008, 22:09
Wohnort: Heimatplanet Abydos

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von SUSEDJAlex »

@ollifa:

Leider hast du den Script mit bestehender Internetverbindung durchgeführt.
Trenne alle Internetverbindungen und lasse den Script noch mal durchlaufen.

Hast du einen Hardwareschalter am Rechner ?
Was ergibt wenn du das eingibst ( als root ):

Code: Alles auswählen

dmesg|grep iwl3945
LG SUSEDJAlex
openSUSE LEAP 15.0 mit Plasma 5.13 / arch linux mit Kernel 4.14.67-1-lts und XFCE4
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

@ SUSEDJAlex,
@ all
Hast du einen Hardwareschalter am Rechner ?
Ja, nach dem Booten ist das WLAN hardware-technisch über diesen Schalter schon aktiviert (LED an), ein Betätigen meldet:
iwl3945: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. (LED aus)

Ein erneutes Betätigen aktiviert die LED wieder, es erscheint keine weitere Meldung... das Netzwerk wird dadurch leider auch nicht re-aktivert, es muss mit rcnetwork restart gezündet werden. Vorher hat's ja auch funktioniert. Ohne Schalter, ohne Script. Booten und fertig.

Ich habe nochmal folgende Befehle direkt nach dem Bootvorgang aufgerufen:

1a) lsmod | grep iwl

iwl3945 116196 0
firmware_class 27776 3 microcode,pcmcia,iwl3945
mac80211 220568 1 iwl3945


2a) dmesg|grep iwl3945

iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels


3a) ifconfig eth0

eth0 Link encap:Ethernet Hardware Adresse **:**:**:**:**:**
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16


4a) ifconfig wlan0

wlan0 Link encap:Ethernet Hardware Adresse **:**:**:**:**:**
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)


5) rcnetwork restart

Shutting down network interfaces:
eth0 device: Broadcom Corporation NetXtreme BCM5753M Gigabit donernet PCI Express (rev 21)
pan0
No configuration found for pan0
Nevertheless the interface will be shut down. done
wlan0 device: Intel Corporation PRO/Wireless 3945ABG Network Cdonection (rev 02)
Shutting down service network . . . . . . . . . . . . . done
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21)
eth0 is controlled by ifplugd waiting
wlan0 device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
wlan0 warning: WPA configured but may be unsupported
wlan0 warning: by this device
wlan0 starting wpa_supplicant
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
wlan0 IP address: 192.168.144.220/24 done
Setting up service network . . . . . . . . . . . . . . done
SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
SuSEfirewall2: using default zone 'ext' for interface wmaster0
SuSEfirewall2: batch committing...
SuSEfirewall2: Firewall rules successfully set


Nach einem Netzwerk-Neustart melden diese:

1b) lsmod | grep iwl

iwl3945 116196 0
firmware_class 27776 3 microcode,pcmcia,iwl3945
mac80211 220568 1 iwl3945


2b) dmesg|grep iwl3945

iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels


3b) ifconfig eth0

eth0 Link encap:Ethernet Hardware Adresse **:**:**:**:**:**
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16



4b) ifconfig wlan0

wlan0 Link encap:Ethernet Hardware Adresse **:**:**:**:**:**
inet Adresse:192.168.144.220 Bcast:192.168.144.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:4326 (4.2 Kb) TX bytes:2588 (2.5 Kb)


Ich erhoffte mir einen Unterschied nach Neustart des Netzwerkes, dem ist aber nicht so, wie man bei 1a/b und 2a/b sehen kann. Punkt 3 ist mehr oder weniger irrelevant, da momentan keine Kabelverbindung besteht. Den einzigen Unterschied gibt's bei 4a/b: es wird eine IP vergeben - nach Netzwerk-Neustart :(

Bye, bis die Tage & schönes WE.
ollifa
wolfi_z
Hacker
Hacker
Beiträge: 464
Registriert: 7. Feb 2004, 12:59
Wohnort: Erlangen / Wiernsheim
Kontaktdaten:

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von wolfi_z »

Das Problem kommt mir bekannt vor ;)
Tritt bei uns auch gelegentlich auf, zum Beispiel hatten wir es oefters, als der Elektriker da war - aus was fuer Gruenden auch immer gibts ein Problem, wenn der DSL-Router zwischendrin mal vom (Strom-)Netz weg war.
Weil der Elektriker, dieses Weichei, naemlich immer die Sicherungen rausgedreht hat vor der Arbeit :D

Hab mir ein Script erstellt und als Shortcut auf dem Desktop abgelegt, welches per Mausklich den rcnetwork restart durchfuehrt :D

LG ... Wolfi :)

/home/wolfi/Desktop/i-net-restart.desktop

Code: Alles auswählen

[Desktop Entry]
Encoding=UTF-8
Icon=knetworkmanager
Type=Link
URL=/usr/local/bin/i-net-restart
X-SuSE-translate=true
/usr/local/bin/i-net-restart

Code: Alles auswählen

#!/bin/sh
# Script for restarting network services
#
# Copy to /usr/local/bin:
# cp i-net-restart /usr/local/bin/
# Set permission:
# chmod 4755 /usr/local/bin/i-net-restart 
#

/sbin/rcnetwork restart

# EOF
ollifa
Newbie
Newbie
Beiträge: 20
Registriert: 22. Mai 2006, 12:58

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von ollifa »

wolfi_z hat geschrieben:Das Problem kommt mir bekannt vor ;)
Tritt bei uns auch gelegentlich auf, zum Beispiel hatten wir es oefters, als der Elektriker da war - aus was fuer Gruenden auch immer gibts ein Problem, wenn der DSL-Router zwischendrin mal vom (Strom-)Netz weg war.
Weil der Elektriker, dieses Weichei, naemlich immer die Sicherungen rausgedreht hat vor der Arbeit :D

Hab mir ein Script erstellt und als Shortcut auf dem Desktop abgelegt, welches per Mausklich den rcnetwork restart durchfuehrt :D

LG ... Wolfi :)

/home/wolfi/Desktop/i-net-restart.desktop

Code: Alles auswählen

[Desktop Entry]
Encoding=UTF-8
Icon=knetworkmanager
Type=Link
URL=/usr/local/bin/i-net-restart
X-SuSE-translate=true
/usr/local/bin/i-net-restart

Code: Alles auswählen

#!/bin/sh
# Script for restarting network services
#
# Copy to /usr/local/bin:
# cp i-net-restart /usr/local/bin/
# Set permission:
# chmod 4755 /usr/local/bin/i-net-restart 
#

/sbin/rcnetwork restart

# EOF
Hallo Wolfi,

ich habe mir auch eine Verknüpfung auf den Desktop gelegt, um das Netzwerk per "One-Click" neuzustarten... das ist aber keine Dauerlösung. Wie schon geschrieben, es hat ja funktioniert, bis... nach einem Update. Seitdem funktioniert das Netzwerk nur noch manuell. Ich habe auch schon mit dem Router gespielt. Aus, warten, wieder an, sofort Laptop hochgefahren. Kein Unterschied...

Trotzdem Danke & Servus,
ollifa
wolfi_z
Hacker
Hacker
Beiträge: 464
Registriert: 7. Feb 2004, 12:59
Wohnort: Erlangen / Wiernsheim
Kontaktdaten:

Re: Netz erst nach "rcnetwork restart" ?!

Beitrag von wolfi_z »

Hi ollifa,

Bei uns scheints ja am Router und einer unterbrochenen 230V-AC-Zufuhr bei demselben zu liegen, auch wenn ich den Zusammenhang nicht ganz kapiere.
Und es passiert ja nur selten ;) -> Deswegen kann ich meinen Ehrgeiz bezueglich einer endgueltigen Loesung im Zaum halten :D
Uebrigens habe ich das mit 10.3, keine Ahnung was passieren wuerde wenn man z. B. 11.0 verwendet. Dieses Update habe ich den 'ollen Kisten' bei uns nicht angetan :/
Auf meinem ganz neuen (und bereits defekten, Top-Qualitaet, von LG!! :down: ) Firmenlaptop habe (hatte :( ) ich openSUSE 11.0 und das ist mit Netzwerknutzung irgendwie 'flexibler'. Will sagen dort akzeptiert z. B. auch der openSUSE-Updater das UMTS-Modem als Weg ins Internet und nicht nur die LAN-Anbindung wie es in 10.3 auf meinem alten Laptop der Fall ist (jeweils bei UMTSmon = 0.8.90).

LG ... Wolfi :)
Antworten