Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

Opensuse 11 Fährt nicht mehr hoch

Alles rund um die Systemverwaltung, die Administration und Konfiguration Eures Linuxsystems

Moderator: Moderatoren

fio00
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2008, 12:30

Opensuse 11 Fährt nicht mehr hoch

Beitrag von fio00 »

Hallo habe auf meinem Rechner Opensuse 11 in letzter zeit stürtz es alle paar Tage ab. Jetzt fährt es nicht mehr hoch. Beim hochfahren wird platte gecheckt und geht dann in die sicherheitskonsole nach fschk bricht der ab mit signal 11. Kann mir jemand weiter helfen?
Benutzeravatar
lOtz1009
Moderator
Moderator
Beiträge: 7180
Registriert: 23. Jan 2008, 09:51

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von lOtz1009 »

Poste doch mal bitte die genaue Ausgabe. Am besten mit einer LiveCD booten und dann die boot.msg von deinem installierten System anschauen.
vi is an editor with two modes: one which destroys your input and the other which beeps at you.
Für meine Beiträge gilt:
Bild
fio00
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2008, 12:30

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von fio00 »

Ausgabe fsck:

fsck /dev/sda2
fsck 1.40.8 (13-Mar-2008)
e2fsck 1.40.8 (13-Mar-2008)
/dev/sda2 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Inode 3990511, i_blocks is 336, should be 320. Fix<y>? yes

Inodes that were part of a corrupted orphan linked list found. Fix<y>? yes

Inode 22052982 was part of the orphaned inode list. FIXED.
Inode 22052989 was part of the orphaned inode list. FIXED.
Inode 22052991 was part of the orphaned inode list. FIXED.
Inode 22052992 was part of the orphaned inode list. FIXED.
Inode 22052994 was part of the orphaned inode list. FIXED.

Running additional passes to resolve blocks claimed by more than one inode...
Pass 1B: Rescanning for multiply-claimed blocks
Multiply-claimed block(s) in inode 11897954: 8388608
Pass 1C: Scanning directories for inodes with multiply-claimed blocks
Pass 1D: Reconciling multiply-claimed blocks
(There are 1 inodes containing multiply-claimed blocks.)

File /users/fio.old/Cookies/fio@ad.adition[11].txt (inode #11897954, mod time Wed Jul 23 09:10:29 2008)
has 1 multiply-claimed block(s), shared with 1 file(s):
<filesystem metadata>
Clone multiply-claimed blocks<y>? yes

Pass 2: Checking directory structure
Entry 'fio@weborama[2].txt' in /users/fio.old/Cookies (11895423) has deleted/unused inode 11897962. Clear<y>? yes

Entry 'fio@tfag[1].txt' in /users/fio.old/Cookies (11895423) has deleted/unused inode 11897959. Clear<y>? yes

Entry 'fio@els[1].txt' in /users/fio.old/Cookies (11895423) has deleted/unused inode 11897968. Clear<y>? yes

Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences: +(4194304--4194655) -4194825 -4194827 -4194829 -4194831 -4194833 -4194849 -4194853 -4194855 -4194857 -4194859 -4194861 -4194863 -4194865 -4194879 -4194881 -4194883 -4194885 -4194887 -4194889 -4194891 -4194893 -4194895 -4194897 -4194913 -4194917 -4194919 -4194921 -4194923 -4194925-4194927 -4194929 -4194945 -4194947 -4194949 -4194951 -4194953 -4194955 -4194957 -4194959 -4194961 -4194975 -4194979 -4194981 -4194983 -4194985 -4194987 -4194989 -4194991 -4194993 -4195009 -4195011 -4195013 -4195015 -4195017 -4195019 -4195021 -4195023 -4195025 -4195039 -4195041 -4195043 -4195045 -4195047 -4195049 -4195051 -4195053 -4195055 -4195057 -4195073 -4195075 -4195077 -4195079 -4195081 -4195083 -4195085 -4195087 -4195089 -4195105 -4195107 -4195109 -4195111 -4195113 -4195115 -4195117 -4195119 -4195121 -4195135 -4195137 -4195139 -4195141 -4195143 -4195145 -4195147 -4195149 -4195151 -4195153 -4195167 -4195169 -4195171 -4195173 -4195175 -4195177 -4195179 -4195181 -4195183 -4195185-4195195 -4195197 -4195199 -4195201 -4195203 -4195205 -4195207 -4195209 -4195211 -4195213 -4195215 -4195217 -4195229 -4195233 -4195235 -4195237 -4195239 -4195241 -4195243 -4195245 -4195247 -4195249 -4195261 -4195263 -4195265 -4195267 -4195269 -4195271 -4195273 -4195275 -4195277 -4195279 -4195281 -4195295 -4195299 -4195301 -4195303 -4195305 -4195307 -4195309 -4195311 -4195313 -4195329 -4195333 -4195335 -4195337 -4195339 -4195341 -4195343 -4195345 -4195353 -4195361 -4195363 -4195367 -4195369 -4195371 -4195373 -4195375 -4195377 -4195395 -4195397 -4195399 -4195401 -4195403 -4195405 -4195407 -4195409 -4195421 -4195425 -4195427 -4195429 -4195431 -4195433 -4195435 -4195437 -4195439 -4195441-4195455 -4195457 -4195461 -4195463 -4195465 -4195467 -4195469 -4195471 -4195473 -4195477 -4195489 -4195491 -4195493 -4195497 -4195499 -4195501 -4195503 -4195505 -4195519 -4195523 -4195525 -4195527 -4195529 -4195531 -4195533 -4195535 -4195537 -4195549 -4195551 -4195555 -4195557 -4195559 -4195561 -4195563 -4195565 -4195567 -4195569 -4195585 -4195587 -4195589 -4195591 -4195593 -4195595 -4195597 -4195601 -4195615 -4195617 -4195619 -4195621 -4195623 -4195625 -4195627 -4195629 -4195631 -4195633 -4195645 -4195649 -4195651 -4195653 -4195655 -4195657 -4195659 -4195661 -4195663 -4195665 -4195677 -4195681 -4195683 -4195685 -4195687 -4195689 -4195691 -4195693 -4195695 -4195697 -4195707 -4195709-4195711 -4195713 -4195715 -4195717 -4195719 -4195721 -4195723 -4195725 -4195727 -4195729 -4195739 -4195743 -4195745 -4195747 -4195749 -4195751 -4195753 -4195755 -4195757 -4195759 -4195761 -4195775 -4195777 -4195779 -4195781 -4195785 -4195787 -4195789 -4195791 -4195793 +(8388608--8389119) +12583433 +12583435 +12583437 +12583439 +12583441 +12583457 +12583461 +12583463 +12583465 +12583467 +12583469 +12583471 +12583473 +12583487 +12583489 +12583491 +12583493 +12583495 +12583497 +12583499 +12583501 +12583503 +12583505 +12583521 +12583525 +12583527 +12583529 +12583531 +12583533 +12583535 +12583537 +12583553 +12583555 +12583557 +12583559 +12583561 +12583563 +12583565 +12583567 +12583569 +12583583 +12583587 +12583589 +12583591 +12583593 +12583595 +12583597 +12583599+12583601 +12583617 +12583619 +12583621 +12583623 +12583625 +12583627 +12583629 +12583631 +12583633 +12583647 +12583649 +12583651 +12583653 +12583655 +12583657 +12583659 +12583661 +12583663 +12583665 +12583681 +12583683 +12583685 +12583687 +12583689 +12583691 +12583693 +12583695 +12583697 +12583713 +12583715 +12583717 +12583719 +12583721 +12583723 +12583725 +12583727 +12583729 +12583743 +12583745 +12583747 +12583749 +12583751 +12583753 +12583755 +12583757 +12583759 +12583761 +12583775 +12583777 +12583779 +12583781 +12583783 +12583785 +12583787 +12583789 +12583791 +12583793 +12583803 +12583805 +12583807 +12583809 +12583811 +12583813 +12583815 +12583817 +12583819 +12583821 +12583823 +12583825 +12583837 +12583841 +12583843 +12583845 +12583847 +12583849 +12583851+12583853 +12583855 +12583857 +12583869 +12583871 +12583873 +12583875 +12583877 +12583879 +12583881 +12583883 +12583885 +12583887 +12583889 +12583903 +12583907 +12583909 +12583911 +12583913 +12583915 +12583917 +12583919 +12583921 +12583937 +12583941 +12583943 +12583945 +12583947 +12583949 +12583951 +12583953 +12583961 +12583969 +12583971 +12583975 +12583977 +12583979 +12583981 +12583983 +12583985 +12584003 +12584005 +12584007 +12584009 +12584011 +12584013 +12584015 +12584017 +12584029 +12584033 +12584035 +12584037 +12584039 +12584041 +12584043 +12584045 +12584047 +12584049 +12584063 +12584065 +12584069 +12584071 +12584073 +12584075 +12584077 +12584079 +12584081 +12584085 +12584097 +12584099 +12584101 +12584105 +12584107 +12584109 +12584111 +12584113 +12584127+12584131 +12584133 +12584135 +12584137 +12584139 +12584141 +12584143 +12584145 +12584157 +12584159 +12584163 +12584165 +12584167 +12584169 +12584171 +12584173 +12584175 +12584177 +12584193 +12584195 +12584197 +12584199 +12584201 +12584203 +12584205 +12584209 +12584223 +12584225 +12584227 +12584229 +12584231 +12584233 +12584235 +12584237 +12584239 +12584241 +12584253 +12584257 +12584259 +12584261 +12584263 +12584265 +12584267 +12584269 +12584271 +12584273 +12584285 +12584289 +12584291 +12584293 +12584295 +12584297 +12584299 +12584301 +12584303 +12584305 +12584315 +12584317 +12584319 +12584321 +12584323 +12584325 +12584327 +12584329 +12584331 +12584333 +12584335 +12584337 +12584347 +12584351 +12584353 +12584355 +12584357 +12584359 +12584361 +12584363 +12584365+12584367 +12584369 +12584383 +12584385 +12584387 +12584389 +12584393 +12584395 +12584397 +12584399 +12584401 -28137098 -28137100 -28137102 -28137104 -28137106 -28137108 -28137110 -28137112 -28137114 -28137116 -28137118 -28137134 -28137136 -28137138 +32265872 +32265876 +32265878 +32265880 +32265882 +32265884 +32265886 +32265902 +32265904 -47587751 -47587754 -47587760 -(88220732--88220733) -(88220740--88220791)
Fix<y>? yes

Free blocks count wrong for group #12 (2, counted=1).
yes

Free blocks count wrong for group #128 (31964, counted=32254).
Fix<y>? yes

Free blocks count wrong for group #384 (21389, counted=21099).
Fix<y>? yes

Free blocks count wrong for group #858 (32240, counted=32254).
Fix<y>? yes

Free blocks count wrong for group #984 (9, counted=0).
Fix<y>? yes

Free blocks count wrong for group #1452 (27024, counted=27027).
Fix<y>? yes

Free blocks count wrong for group #2692 (6040, counted=6094).
Fix<y>? yes

Free blocks count wrong (42109500, counted=42109561).
Fix<y>? yes

yInode bitmap differences: -11897959 -11897962 -11897968 -22052950 -22052982 -22052989 -(22052991--22052992) -22052994
Fix<y>? yes

Free inodes count wrong for group #1452 (4340, counted=4343).
Fix<y>? yes

Free inodes count wrong for group #2692 (7779, counted=7785).
Fix<y>? yes

Free inodes count wrong (24057608, counted=24057617).
Fix<y>? yes


/dev/sda2: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda2: 272623/24330240 files (1.3% non-contiguous), 55180079/97289640 blocks
linux:/home/linux #

Inspecting /boot/System.map-2.6.25.11-0.1-default
Loaded 28393 symbols from /boot/System.map-2.6.25.11-0.1-default.
Symbols match kernel version 2.6.25.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.25.11-0.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-07-13 20:48:28 +0200
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<6>Scan SMP from c0000000 for 1024 bytes.
<6>Scan SMP from c009fc00 for 1024 bytes.
<6>Scan SMP from c00f0000 for 65536 bytes.
<7>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 131056
<4> HighMem 131056 -> 131056
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 131056
<7>On node 0 totalpages: 131056
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4064 pages, LIFO batch:0
<7> Normal zone: 991 pages used for memmap
<7> Normal zone: 125969 pages, LIFO batch:31
<7> HighMem zone: 0 pages used for memmap
<7> Movable zone: 0 pages used for memmap
<6>DMI 2.2 present.
<6>Using APIC driver default
<4>ACPI: RSDP 000F78B0, 0014 (r0 VIA694)
<4>ACPI: RSDT 1FFF3000, 0028 (r1 VIA694 MSI ACPI 42302E31 AWRD 0)
<4>ACPI: FACP 1FFF3040, 0074 (r1 VIA694 MSI ACPI 42302E31 AWRD 0)
<4>ACPI: DSDT 1FFF30C0, 27B3 (r1 VIA694 AWRDACPI 1000 MSFT 100000C)
<4>ACPI: FACS 1FFF0000, 0040
<6>ACPI: PM-Timer IO Port: 0x4008
<4>Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
<5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 resume=/dev/sda1 splash=silent showopts
<6>bootsplash: silent mode.
<6>Local APIC disabled by BIOS -- you can enable it with "lapic"
<7>mapped APIC to ffffb000 (0140c000)
<6>Enabling fast FPU save and restore... done.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 8192 bytes)
<4>Detected 1000.080 MHz processor.
<4>Console: colour VGA+ 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 509264k/524224k available (1945k kernel code, 14312k reserved, 1628k data, 256k init, 0k highmem)
<6>virtual kernel memory layout:
<4> fixmap : 0xffdf2000 - 0xfffff000 (2100 kB)
<4> pkmap : 0xff400000 - 0xff800000 (4096 kB)
<4> vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB)
<4> lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
<4> .init : 0xc0485000 - 0xc04c5000 ( 256 kB)
<4> .data : 0xc02e667d - 0xc047d96c (1628 kB)
<4> .text : 0xc0100000 - 0xc02e667d (1945 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<4>Calibrating delay using timer specific routine.. 2002.52 BogoMIPS (lpj=4005052)
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized <NULL>
<6>AppArmor: Registered secondary security module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 18k freed
<6>ACPI: Core revision 20070126
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 328 Objects with 30 Devices 73 Methods 20 Regions
<4> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>ACPI: setting ELCR to 0200 (from 1e20)
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<4>CPU0: AMD Athlon(tm) processor stepping 02
<5>SMP motherboard not detected.
<5>Local APIC not detected. Using dummy APIC emulation.
<6>Brought up 1 CPUs
<7>CPU0 attaching sched-domain:
<7> domain 0: span 00000001
<7> groups: 00000001
<6>net_namespace: 548 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
<6>PCI: Using configuration type 1
<6>Setting up standard PCI resources
<4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
<4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 Runtime GPEs in this block
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:...................................
<4>Initialized 15/20 Regions 0/1 Fields 14/15 Buffers 6/10 Packages (337 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:.
<4>Executed 1 _INI methods requiring 1 _STA executions (examined 33 objects)
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S4 S5)
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>pci 0000:00:00.0: Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09
<6>pci 0000:00:07.4: quirk: region 4000-40ff claimed by vt82c586 ACPI
<6>pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
<6>pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>AppArmor: AppArmor Filesystem Enabled
<6>system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
<6>system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
<6>system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
<6>system 00:00: iomem range 0xfc000-0xfffff could not be reserved
<6>system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
<6>system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
<6>system 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
<6>system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
<6>system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
<6>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: 9000-9fff
<6> MEM window: 0xd4000000-0xd5ffffff
<6> PREFETCH window: 0x00000000d7000000-0x00000000d77fffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5301k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1218398510.079:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>PCI: VIA PCI bridge detected. Disabling DAC.
<6>pci 0000:00:07.0: Disabling VIA external APIC routing
<7>pci 0000:01:00.0: Boot video device
<6>isapnp: Scanning for PnP cards...
<7>Switched to high resolution mode on CPU 0
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>FDC 0 is a post-1991 82077
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /devices/platform/pcspkr/input/input0
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 256k freed
<6>Write protecting the kernel read-only data: 1440k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
<6>ACPI: ACPI0007:00 is registered as cooling_device0
<6>No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>pata_via 0000:00:07.1: version 0.3.3
<6>scsi0 : pata_via
<6>scsi1 : pata_via
<6>ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xa000 irq 14
<6>ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xa008 irq 15
<6>ata1.00: ATA-7: ST3400832A, 3.06, max UDMA/100
<6>ata1.00: 781422768 sectors, multi 16: LBA48
<6>ata1.00: configured for UDMA/66
<6>ata2.01: ATAPI: SAMSUNG CD-ROM SCR-3232 VH102, VH102, max MWDMA2, CDB intr
<6>ata2.01: configured for MWDMA2
<5>scsi 0:0:0:0: Direct-Access ATA ST3400832A 3.06 PQ: 0 ANSI: 5
<5>scsi 1:0:1:0: CD-ROM SAMSUNG CD-ROM SCR-3232 H102 PQ: 0 ANSI: 5
<6>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
<4>Driver 'sd' needs updating - please use bus_type methods
<5>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
<7>PCI: setting IRQ 12 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
<6>uhci_hcd 0000:00:07.2: UHCI Host Controller
<6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:07.2: irq 12, io base 0x0000a400
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:07.2
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
<7>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:08.2[C] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
<6>ehci_hcd 0000:00:08.2: EHCI Host Controller
<6>ehci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:08.2: irq 10, io mem 0xd7811000
<6>ehci_hcd 0000:00:08.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 4 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.25.11-0.1-default ehci_hcd
<6>usb usb2: SerialNumber: 0000:00:08.2
<6>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
<6>uhci_hcd 0000:00:07.3: UHCI Host Controller
<6>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:07.3: irq 12, io base 0x0000a800
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:07.3
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<7>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
<6>uhci_hcd 0000:00:08.0: UHCI Host Controller
<6>uhci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:08.0: irq 11, io base 0x0000bc00
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:08.0
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<7>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:08.1 -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
<6>uhci_hcd 0000:00:08.1: UHCI Host Controller
<6>uhci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:08.1: irq 5, io base 0x0000c000
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:08.1
<6>usb 2-3: new high speed USB device using ehci_hcd and address 2
<6>usb 2-3: configuration #1 chosen from 1 choice
<6>usb 2-3: New USB device found, idVendor=14cd, idProduct=6600
<6>usb 2-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
<6>usb 2-3: Product: USB 2.0 IDE DEVICE
<6>usb 2-3: Manufacturer: Super Top
<6>usb 2-3: SerialNumber: ??????????
<6>PM: Starting manual resume from disk
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 1:0:1:0: Attached scsi generic sg1 type 5
<6>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
<6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
<6>eth0: RTL8169sb/8110sb at 0xe0838000, 00:0c:76:76:05:78, XID 10000000 IRQ 11
<7>parport_pc: VIA 686A/8231 detected
<7>parport_pc: probing current configuration
<7>parport_pc: Current parallel port base: 0x378
<6>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>Linux agpgart interface v0.103
<6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
<4>3c59x: Donald Becker and others.
<6>0000:00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at e0932000.
<6>parport_pc: VIA parallel port: io=0x378, irq=7
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<4>Driver 'sr' needs updating - please use bus_type methods
<4>sr0: scsi3-mmc drive: 20x/32x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:1:0: Attached scsi CD-ROM sr0
<6>agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
<6>agpgart: AGP aperture is 64M @ 0xd0000000
<6>Initializing USB Mass Storage driver...
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
<6>scsi2 : SCSI emulation for USB Mass Storage devices
<6>ACPI: Power Button (CM) [PWRB]
<6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
<6>ACPI: Sleep Button (CM) [SLPB]
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
<7>PCI: Setting latency timer of device 0000:00:07.5 to 64
<6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k
<5>scsi 2:0:0:0: Direct-Access Maxtor 3 1536H2 PQ: 0 ANSI: 0
<5>sd 2:0:0:0: [sdb] 29336832 512-byte hardware sectors (15020 MB)
<5>sd 2:0:0:0: [sdb] Write Protect is off
<7>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<5>sd 2:0:0:0: [sdb] 29336832 512-byte hardware sectors (15020 MB)
<5>sd 2:0:0:0: [sdb] Write Protect is off
<7>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
<3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6> sdb: sdb1
<5>sd 2:0:0:0: [sdb] Attached SCSI disk
<5>sd 2:0:0:0: Attached scsi generic sg2 type 0
<7>usb-storage: device scan complete
<6>ppdev: user-space parallel port driver
<6>Adding 1542232k swap on /dev/sda1. Priority:-1 extents:1 across:1542232k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
<6>loop: module loaded
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sun Aug 10 20:01:50 2008

Creating device nodes with udev
Trying manual resume from /dev/sda1
Invoking userspace resume from /dev/sda1
boot/82-resume.userspace.sh: line 48: /proc/splash: No such file or directory
resume: libgcrypt version: 1.4.0
Trying manual resume from /dev/sda1
Invoking in-kernel resume from /dev/sda1
Waiting for device /dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 to appear: ok
fsck 1.40.8 (13-Mar-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: recovering journal
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 12001405 (uid=0, gid=0, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 12001387 (uid=0, gid=0, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 12001404 (uid=0, gid=0, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 12001403 (uid=0, gid=0, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 12001386 (uid=0, gid=0, mode=0140755, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 22052982 (uid=0, gid=0, mode=0100600, size=217016)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 22052950 (uid=60, gid=108, mode=0100600, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 22052948 (uid=60, gid=108, mode=0100600, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 22052947 (uid=60, gid=108, mode=0100600, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 22052946 (uid=60, gid=108, mode=0100600, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: Clearing orphaned inode 22052945 (uid=60, gid=108, mode=0100600, size=0)
/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2: clean, 271741/24330240 files, 64549414/97289640 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Aug 10 22:04:20 2008

done
Starting udevd: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/sda2 is already mounted on /

Setting up the hardware clockdone
Activating device mapper...
done
Checking file systems...
fsck 1.40.8 (13-Mar-2008)
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
doneLoading fuse module done
Mounting fuse control filesystemdone
<notice>killproc: kill(505,29)
Creating /var/log/boot.msg
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor profiles Activating remaining swap-devices in /etc/fstab...
doneTurning quota on
Checking quotas. This may take some time.
done
done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Setting up hostname 'pumukel'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -DSSL ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 get_module_list_done=true LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 get_includes_done=true PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= RUNLEVEL=S SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=3 HOME=/var/lib/apache2 SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
done
done<notice>killproc: kill(505,3)

INIT:
Boot logging started on /dev/tty1(/dev/console) at Sun Aug 10 22:04:34 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>Entering runlevel: 5


startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Starting D-Bus daemon<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up


Starting acpid done
done
acpid: 1 rule loaded


<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
done
Loading CPUFreq modules<notice>startproc: execve (/usr/sbin/libvirtd) [ /usr/sbin/libvirtd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/libvirtd ]
Starting libvirtd done
Checking/updating CPU microcode unused
(CPUFreq not supported)
Starting HAL daemonInitializing random number generatordone
done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
eth0 IP address: 192.168.13.11/24
<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
done eth1 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
eth1 (DHCP) . . . <notice>checkproc: /usr/bin/kdm 2119
. . . . . . . . . . . . no IP address yet... backgrounding.
waiting
eth1 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
eth1 dhcpcd is still waiting for data
waiting
eth1 interface could not be set up until now
failedSetting up service network . . . . . . . . . . . . . . . .failed
Starting service kdmdone
<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting Samba NMB daemon done
Starting RPC portmap daemondone
Mount CIFS File Systems unused
Starting auditd done
<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
done<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting Avahi daemon.done
Loading compose table latin1.adddone
Start Unicode mode
done<notice>checkproc: /usr/bin/kdm 2119
<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
Starting Avahi DNS Configuration daemondone
Starting DHCP server [chroot]done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting java.binfmt_misc done
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
..dead
Starting service MySQL done
Starting powersaved: done
<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Samba SMB daemon done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd -pidfile /var/run/xinetd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST3400832A_5NF1GAGY-part2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
Starting CRON daemondone
Starting INET services. (xinetd)done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: microcode.ctl smbfs splash
<notice>killproc: kill(1485,3)
fio00
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2008, 12:30

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von fio00 »

das system fährt jetzt wieder hoch würde aber gerne analysieren warum der rechner immer wieder abstürtz. wie stell ich das am besten an?
Benutzeravatar
lOtz1009
Moderator
Moderator
Beiträge: 7180
Registriert: 23. Jan 2008, 09:51

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von lOtz1009 »

Schau dir mal nach einem Absturz die Datei /var/log/messages an. Aber fang unten an, die ist ziemlich groß.
vi is an editor with two modes: one which destroys your input and the other which beeps at you.
Für meine Beiträge gilt:
Bild
fio00
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2008, 12:30

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von fio00 »

der ausschnitt aus der log kurz vor dem letzen absturz:

Aug 12 19:00:01 pumukel /usr/sbin/cron[6163]: (root) CMD (ntpdate ntps1-0.cs.tu-berlin.de)
Aug 12 19:00:01 pumukel /usr/sbin/cron[6171]: (root) CMD (/etc/webmin/time/sync.pl)
Aug 12 19:15:01 pumukel /usr/sbin/cron[6260]: (root) CMD (ntpdate ntps1-0.cs.tu-berlin.de)
Aug 12 19:30:01 pumukel /usr/sbin/cron[6352]: (root) CMD (ntpdate ntps1-0.cs.tu-berlin.de)
Aug 12 19:31:23 pumukel dhcpd: DHCPDISCOVER from 00:0b:cd:6f:52:e3 via eth0
Aug 12 19:31:23 pumukel dhcpd: DHCPOFFER on 192.168.13.2 to 00:0b:cd:6f:52:e3 via eth0
Aug 12 19:31:23 pumukel dhcpd: DHCPREQUEST for 192.168.13.2 (192.168.13.11) from 00:0b:cd:6f:52:e3 via eth0
Aug 12 19:31:23 pumukel dhcpd: DHCPACK on 192.168.13.2 to 00:0b:cd:6f:52:e3 via eth0
Aug 12 19:33:24 pumukel sshd[6425]: Address 192.168.13.3 maps to localhost, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT!
Aug 12 19:33:27 pumukel sshd[6425]: Accepted keyboard-interactive/pam for root from 192.168.13.3 port 1066 ssh2
Aug 12 19:33:36 pumukel sshd[6443]: Address 192.168.13.3 maps to localhost, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT!
Aug 12 19:33:38 pumukel sshd[6443]: Accepted keyboard-interactive/pam for server from 192.168.13.3 port 1068 ssh2
Aug 12 19:47:01 pumukel syslog-ng[1496]: syslog-ng version 1.6.12 starting
Aug 12 19:47:02 pumukel rchal: CPU frequency scaling is not supported by your processor.
Aug 12 19:47:02 pumukel rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Aug 12 19:47:02 pumukel rchal: Cannot load cpufreq governors - No cpufreq driver available
Aug 12 19:47:05 pumukel ifup: lo
Aug 12 19:47:05 pumukel ifup: lo
Aug 12 19:47:05 pumukel ifup: IP address: 127.0.0.1/8
Aug 12 19:47:05 pumukel ifup:
Aug 12 19:47:05 pumukel ifup:
Aug 12 19:47:05 pumukel ifup: IP address: 127.0.0.2/8
Aug 12 19:47:05 pumukel ifup:
Aug 12 19:47:06 pumukel ifup: eth0 device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Aug 12 19:47:06 pumukel ifup: eth0
Aug 12 19:47:06 pumukel ifup: IP address: 192.168.13.11/24
Aug 12 19:47:06 pumukel kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.059:2): operation="profile_load" name="/bin/ping" name2="default" pid=1174
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.251:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1175
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.363:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1182
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.463:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1188
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.619:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1189
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.815:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1198
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563213.967:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1218
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563214.131:9): operation="profile_load" name="/usr/sbin/named" name2="default" pid=1223
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563214.303:10): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1224
Aug 12 19:47:06 pumukel kernel: type=1505 audit(1218563214.539:11): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1239
Aug 12 19:47:06 pumukel kernel: powernow-k8: Processor cpuid 642 not supported
Aug 12 19:47:06 pumukel kernel: powernow: No powernow capabilities detected
Aug 12 19:47:06 pumukel kernel: r8169: eth0: link up
Aug 12 19:47:06 pumukel ifup:
Aug 12 19:47:07 pumukel kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug 12 19:47:07 pumukel kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 12 19:47:07 pumukel SuSEfirewall2: SuSEfirewall2 not active
Aug 12 19:47:08 pumukel ifup: eth1 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Aug 12 19:47:08 pumukel kdm[2142]: XDMCP socket creation failed, errno 97
Aug 12 19:47:08 pumukel kernel: eth1: setting half-duplex.
Aug 12 19:47:08 pumukel ifup-dhcp: eth1 (DHCP)
Aug 12 19:47:08 pumukel ifup-dhcp: .
Aug 12 19:47:08 pumukel dhcpcd[2178]: eth1: dhcpcd 3.2.3 starting
Aug 12 19:47:08 pumukel dhcpcd[2178]: eth1: hardware address = 00:01:02:08:6a:ec
Aug 12 19:47:08 pumukel kernel: NET: Registered protocol family 17
Aug 12 19:47:08 pumukel dhcpcd[2178]: eth1: broadcasting for a lease
Aug 12 19:47:09 pumukel ifup-dhcp: .
Aug 12 19:47:23 pumukel syslog-ng[1496]: last message repeated 13 times
Aug 12 19:47:23 pumukel ifup-dhcp: no IP address yet... backgrounding.
Aug 12 19:47:29 pumukel auditd[2692]: Started dispatcher: /sbin/audispd pid: 2694
Aug 12 19:47:29 pumukel audispd: af_unix plugin initialized
Aug 12 19:47:29 pumukel audispd: audispd initialized with q_depth=64 and 1 active plugins
Aug 12 19:47:29 pumukel auditd[2692]: Init complete, auditd 1.6.8 listening for events (startup state disable)
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Found user 'avahi' (UID 104) and group 'avahi' (GID 105).
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Successfully dropped root privileges.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: avahi-daemon 0.6.22 starting up.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Loading service file /etc/avahi/services/sftp-ssh.service.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Loading service file /etc/avahi/services/ssh.service.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.13.11.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: New relevant interface eth0.IPv4 for mDNS.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Network interface enumeration completed.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Registering new address record for 192.168.13.11 on eth0.IPv4.
Aug 12 19:47:29 pumukel avahi-daemon[2710]: Registering HINFO record with values 'I686'/'LINUX'.
Aug 12 19:47:29 pumukel avahi-dnsconfd[2731]: Successfully connected to Avahi daemon.
Aug 12 19:47:30 pumukel avahi-daemon[2710]: Server startup complete. Host name is pumukel.local. Local service cookie is 1508163368.
Aug 12 19:47:31 pumukel dhcpd: Internet Systems Consortium DHCP Server V3.0.6
Aug 12 19:47:31 pumukel dhcpd: Copyright 2004-2007 Internet Systems Consortium.
Aug 12 19:47:31 pumukel dhcpd: All rights reserved.
Aug 12 19:47:31 pumukel dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Aug 12 19:47:31 pumukel dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Aug 12 19:47:31 pumukel dhcpd: Internet Systems Consortium DHCP Server V3.0.6
Aug 12 19:47:31 pumukel dhcpd: Copyright 2004-2007 Internet Systems Consortium.
Aug 12 19:47:31 pumukel dhcpd: All rights reserved.
Aug 12 19:47:31 pumukel dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Aug 12 19:47:31 pumukel dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Aug 12 19:47:31 pumukel avahi-daemon[2710]: Service "pumukel" (/etc/avahi/services/ssh.service) successfully established.
Aug 12 19:47:31 pumukel avahi-daemon[2710]: Service "SFTP File Transfer on pumukel" (/etc/avahi/services/sftp-ssh.service) successfully established.
Aug 12 19:47:31 pumukel dhcpd: Wrote 0 deleted host decls to leases file.
Aug 12 19:47:31 pumukel dhcpd: Wrote 0 new dynamic host decls to leases file.
Aug 12 19:47:31 pumukel dhcpd: Wrote 2 leases to leases file.
Aug 12 19:47:31 pumukel dhcpd: Listening on LPF/eth0/00:0c:76:76:05:78/192.168.13/24
Aug 12 19:47:31 pumukel dhcpd: Sending on LPF/eth0/00:0c:76:76:05:78/192.168.13/24
Aug 12 19:47:31 pumukel dhcpd: Sending on Socket/fallback/fallback-net
Aug 12 19:47:32 pumukel powersaved[2930]: WARNING (CpufreqManagement:52) No capability cpufreq_control
Aug 12 19:47:32 pumukel powersaved[2930]: WARNING (CpufreqManagement:52) No capability cpufreq_control
Aug 12 19:47:33 pumukel /usr/sbin/cron[3005]: (CRON) STARTUP (V5.0)
Aug 12 19:47:35 pumukel sshd[3046]: Server listening on 0.0.0.0 port 22.
Aug 12 19:47:35 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=26]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-udp] [line=14]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=15]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=11]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-udp] [line=14]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=15]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/discard-udp [file=/etc/xinetd.d/discard-udp] [line=14]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=15]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [line=14]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/netstat [file=/etc/xinetd.d/netstat] [line=15]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/servers [file=/etc/xinetd.d/servers] [line=16]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/services [file=/etc/xinetd.d/services] [line=14]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=14]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/systat [file=/etc/xinetd.d/systat] [line=12]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=17]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [line=15]
Aug 12 19:47:36 pumukel xinetd[3058]: Reading included configuration file: /etc/xinetd.d/vnc [file=/etc/xinetd.d/vnc] [line=15]
Aug 12 19:47:36 pumukel xinetd[3058]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in.
Aug 12 19:47:36 pumukel xinetd[3058]: Started working: 2 available services
Aug 12 19:47:36 pumukel webmin[3032]: Webmin starting
Aug 12 19:47:45 pumukel sshd[3111]: Address 192.168.13.3 maps to localhost, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT!
Aug 12 19:47:47 pumukel sshd[3111]: Accepted keyboard-interactive/pam for root from 192.168.13.3 port 1249 ssh2
Aug 12 19:48:18 pumukel kernel: warning: `smbd' uses 32-bit capabilities (legacy support in use)
fio00
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2008, 12:30

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von fio00 »

mir fällt auf das es mit powersafed probleme gibt. Es handelt sich bei der CPU um einen Thunderbird der von 1,3ghz auf 1ghz gedrosselt ist. kann ich powersafe einfach abstellen? also aus dem runlevel rausnehmen?
fio00
Newbie
Newbie
Beiträge: 25
Registriert: 2. Jan 2008, 12:30

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von fio00 »

Die Lösung für das Problem war der Ram. Ein Speicherriegel war defekt wodurch der Rechner immer wieder abgestürzt ist.

Sollte jemand nach dem Absturz von opensuse immer in der Notfallkonsole landen da fschk nicht zu ende laufen kann, einfach von der Live CD booten und nochmals fschk druchführen. Ist nervig da ich letztens einen Absturz beim Yast auto Update hatte und die Reparatur durch fschk insgesamt zwei Stunden bei einer 400gig Platte gebraucht hat. Aber immerhin klappt es. Ich habs auch schon erlebt das nach einem Absturz die Partition so zerhauen war das nichts mehr ging.
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

Hallo,
ich habe ein ähnliches Problem seit heute:

Nachdem mir OpenSuse11.0 abgestürzt ist, es lief das Programm Xripper, dann wollte ich den Konquerer starten und alles fror ein, nichts ging mehr.
Nach zwei Stunden habe ich den Rechner, nachdem keine Tastenkombination half, komplett abgeschaltet.
Seitdem lässt er sich nicht mehr hochfahren, bleibt immer bei fsck stehen.

u.a. kommt
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: status: {DRDY}
ata1: port is slow to respond, please be patient (status 0xd0)

und so weiter

Str Alt Entf bringt folgende Meldung:
EXT3-fs error (device sda1):ext3_get_inode_loc: unable to read inode block - inode=334708, block=1343499
INIT: cannot execute "/sbin/shutdown"

Wenn ich lange genug warte, durchläuft der Recdhner immer wieder eine Routine und endet bei:
INIT: Id "6" respawning too fast: disabled for 5 minutes

dann geht wieder alles von vorne los.
Da ich keine LiveCD oder die InstallationsCD habe, wird's wohl schwer, das System wieder zum Laufen zu bringen ....

Kann mir jemand etwas anderes empfehlen?

Bin für jede Info dankbar
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

ich lade mir gerade über einen anderen Rechner die Live CD für Suse11.0 herunter.
Allerdings gibt es das nur mit KDE4, ich habe KDE3.
Gibt das ein Problem?

Wie ist es, wenn ich mir stattdessen 11.1 als LiveCD herunterlade? Probleme?
Was passiert mit meinen zusätzlichen Programmen, wie TuxGuitar etc.?

Gruß
Palomino
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

fio00 hat geschrieben:Die Lösung für das Problem war der Ram. Ein Speicherriegel war defekt wodurch der Rechner immer wieder abgestürzt ist.

Sollte jemand nach dem Absturz von opensuse immer in der Notfallkonsole landen da fschk nicht zu ende laufen kann, einfach von der Live CD booten und nochmals fschk druchführen. Ist nervig da ich letztens einen Absturz beim Yast auto Update hatte und die Reparatur durch fschk insgesamt zwei Stunden bei einer 400gig Platte gebraucht hat. Aber immerhin klappt es. Ich habs auch schon erlebt das nach einem Absturz die Partition so zerhauen war das nichts mehr ging.
Wie kann ich bei mir feststellen, ob ein Baustein defekt ist? Bei mir hängt sich das System auch immer wieder auf.

Gruß
Pal
admine
Administrator
Administrator
Beiträge: 8947
Registriert: 15. Feb 2004, 21:13

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von admine »

Palomino165 hat geschrieben: Wie kann ich bei mir feststellen, ob ein Baustein defekt ist? Bei mir hängt sich das System auch immer wieder auf.
Stichwort: memtest ;)
Grüße
-------------------------
..:: Deutsche Mugge ::..
-------------------------
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

@admine
bin ich gerade dabei.

Was bedeutet es, wenn der blaue Hintergrund auf einmal rot unterlegt ist?
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

Hallo Admin,

wenn ich den Memtest normal durchlaufen lasse, läuft alles glatt.
wenn ich dann aber "c" für configuration drücke, dann "3" für Memory Sizing und "2" für Bios all, dann hängt sich der Test bei #1 25% auf, bis Zeile 64 ist alles rot unterlegt.

Woran kann das liegen?
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

ich komme hier nicht weiter.
Nachdem der Memtest mich nicht weiter gebracht hat, tappe ich im Dunkeln.
Was kann ich noch tun, um mein Suse wieder zum Laufen zu bringen, ausser einer Neuinstallation.
welche Möglichkeiten habe ich noch mit der Live CD
fsck in der Konsole kennt er nicht, bzw. bringt er mir nur die Kernelversion hervor.

Danke für eine kurze Hilfe
Palomino
josef-wien
Ultimate Guru
Ultimate Guru
Beiträge: 5625
Registriert: 23. Sep 2008, 17:09

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von josef-wien »

Da kann ein Speicherbaustein defekt sein. Wenn Du mehrere drinnen hast, baue alle bis auf einen aus und teste jeden für sich.

Da kann die Festplatte defekt sein. Organisiere von deinem Festplatten-Hersteller dessen Analyse- und Reparatur-Tools und führe sie aus.

Wenn Du Glück hast, kann bloß ein Dateisystem durcheinandergeraten sein. Für fsck mußt Du dich als root (vermutlich ohne Paßwort) anmelden.

P.S. Welche Live-CD Du verwendest, ist belanglos.
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

Hallo josef-wien,

wenn ich den Standardtest, den der automatisch startet, durchlaufen lasse, ist alles ok.
Wenn ich aber mit "c" das Konfigurationsfenster aufrufen und "3" für Memory size drücke und dann "2" für Bios All, dann hängt er sich irgendwann auf und das untere Feld mit den Speicheradressen ist rot unterlegt.
Kennst du das?
Benutzeravatar
Rainer Juhser
Moderator
Moderator
Beiträge: 3899
Registriert: 14. Aug 2006, 17:03
Wohnort: 04711 Münchhausen

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Rainer Juhser »

http://www.memtest86.com/#philo:
The first option (BIOS-All) also uses the "e820" method to obtain a memory map. However, when this option is selected all of the reserved memory segments are tested, regardless of what their intended use is. The only exception is memory segments that begin above 3GB. Testing has shown that these segments are typically not safe to test. The BIOS-All option is more thorough but could be unstable with some motherboards.
siehe auch http://www.pc-experience.de/wbb2/thread ... adid=26965
Salü vom Rainer Juhser
_________________________
Bist du neu - guckst du hier:
Häufig gestellte Fragen == Hilfe zu Antworten aus dem Forum == WISSEN PUR: Linupedia - das Linux-Club WIKI!
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

Das heißt für mich, daß ich die gewählten Optionen nicht nehmen sollte, da das instabil läuft.
Danach ist der normale Test bei mir mit OK durch.
Ich werde jetzt die Rambausteine nochmals einzeln testen und wenn das nichts bringt, weiß ich auch nicht weiter.
Ist es ein unterschied, auf welcher Bank die Bausteine stecken?
Palomino165
Member
Member
Beiträge: 118
Registriert: 27. Jun 2008, 18:24

Re: Opensuse 11 Fährt nicht mehr hoch

Beitrag von Palomino165 »

Alle RAM Bausteine getestet: Keine Fehler gefunden.
Was nun?
Bin hier etwas ratlos.
Wie komme ich auf meine Festplatze? Kann ich über die LiveCD darauf zugreifen?
Antworten