Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.
wine + aspi + dvdshrink
Moderator: Moderatoren
wine + aspi + dvdshrink
servus @all,
mein problem bei dieser konstelation ist, dass mir wine immer wenn ich die dvd öffnen möchte, mit einen aspi fehler abschmiert. starten von shrink funzt super. hat jemand einen tip für mich? gibt es etwas aspi ähnliches für wine?
ich nutze suse 9 mit der dazu gehörigen wine version... nummer weiss ich jetzt nicht. dvdshrink hab ich in der version 3.1.6
im meinem rechner werkelt 1 ide dvd laufwerke und 1 ide dvd brenner von nec.
für antworten bin ich dankbar...
greetz
mein problem bei dieser konstelation ist, dass mir wine immer wenn ich die dvd öffnen möchte, mit einen aspi fehler abschmiert. starten von shrink funzt super. hat jemand einen tip für mich? gibt es etwas aspi ähnliches für wine?
ich nutze suse 9 mit der dazu gehörigen wine version... nummer weiss ich jetzt nicht. dvdshrink hab ich in der version 3.1.6
im meinem rechner werkelt 1 ide dvd laufwerke und 1 ide dvd brenner von nec.
für antworten bin ich dankbar...
greetz
Hallo,
Habe wine-20040309-0.i586.rpm installiert.
Gebe ich in der Datei ~/.wine/config im Abschnitt
[Version]
"Windows" = "win2k"
ein, dann funct zumindest die Analyse der DVD.
Leider stürzt DVDShrink danach ab.
Wahrscheinlich nur ein Prob mit der Festplattenkonfiguration unter wine.
Ist jemand schon weiter?
Viele Grüße gh
Habe wine-20040309-0.i586.rpm installiert.
Gebe ich in der Datei ~/.wine/config im Abschnitt
[Version]
"Windows" = "win2k"
ein, dann funct zumindest die Analyse der DVD.
Leider stürzt DVDShrink danach ab.
Wahrscheinlich nur ein Prob mit der Festplattenkonfiguration unter wine.
Ist jemand schon weiter?
Viele Grüße gh
Nachtrag
Bei mir funktioniert es jetzt.
In der Datei
~/.wine/config müssen folgende Einträge drinnen sein:
Beispiel für konfigurierte Festplatten (muss natürlich gemountet sein):
[Drive D]
"Path" = "/media/daten"
"Type" = "hd"
"Label" = "/media/daten"
Im Abschnitt [wine] müssen unter
[wine]
"Path" = "C:\\Windows;C:\\Windows\\System;D:\\;E:\\;F:\\;G:\\;X:\\;Y:\\"
alle Laufwerke auftauchen, auf die zugegriffen werden können soll.
und wie gesagt unter
[Version]
; Windows version to imitate
"Windows" = "win2k" oder "Windows" = "winxp"
eintragen und Semikolons davor entfernen, damit kein ASPI-Treiber
verlangt wird.
Viel Glück,
gh
In der Datei
~/.wine/config müssen folgende Einträge drinnen sein:
Beispiel für konfigurierte Festplatten (muss natürlich gemountet sein):
[Drive D]
"Path" = "/media/daten"
"Type" = "hd"
"Label" = "/media/daten"
Im Abschnitt [wine] müssen unter
[wine]
"Path" = "C:\\Windows;C:\\Windows\\System;D:\\;E:\\;F:\\;G:\\;X:\\;Y:\\"
alle Laufwerke auftauchen, auf die zugegriffen werden können soll.
und wie gesagt unter
[Version]
; Windows version to imitate
"Windows" = "win2k" oder "Windows" = "winxp"
eintragen und Semikolons davor entfernen, damit kein ASPI-Treiber
verlangt wird.
Viel Glück,

gh
gute idee mit dem update von wine
auf die sache mit dem wine update hätte ich auch kommen können. hab nur die shrink vers. up und downgegraded. aber mit dem neuen wine scheint es zu klappen, zumindest klappt schon mal die analyse der dvd ohne probs.
greetz
greetz
klappt noch nicht
Hallo!
Also ich habe auch wine-version 20040309 und habe auch die Einträge in der Konfig-Datei angepasst wie von gh beschrieben. Allerdings bekomme ich immer noch die ASPI-Fehlermeldung. Könnte mal jemand bei dem dvdshrink jetzt prblemlos mit wine läuft seine Konfig-Datei hier posten?
Danke schonmal, Grond
Also ich habe auch wine-version 20040309 und habe auch die Einträge in der Konfig-Datei angepasst wie von gh beschrieben. Allerdings bekomme ich immer noch die ASPI-Fehlermeldung. Könnte mal jemand bei dem dvdshrink jetzt prblemlos mit wine läuft seine Konfig-Datei hier posten?
Danke schonmal, Grond
hast du auch dvdshrink mit wine installiert? oder hast du nur das verzeichnis von windows übernommen? nach der installation mit wine war bei mir dieser fehler weg.
hier mal meine wine-config:
hoffentlich hilft es
--------------------------------------------------------------------------------------------------
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive C]
"Path" = "%HOME%/.wine/fake_windows"
"Type" = "hd"
"Label" = "fake_windows"
"Filesystem" = "win95"
;[Drive D]
;"Type" = "hd"
;"Path" = "/mnt/dvd"
;"Label" = "dvd"
;"FS" = ""
;"Device" = "/dev/hdd"
[Drive D]
"Path" = "/mnt/dvd"
"Type" = "cdrom"
"Label" = "DVD-R"
"Filesystem" = "win95"
"Device" = "/dev/hdd"
[Drive X]
"Type" = "hd"
"Path" = "/root/.wine/.tmp"
"Label" = "Tmp Drive"
;"FS" = "win95"
[Drive Y]
"Type" = "network"
"Path" = "%HOME%"
"Label" = "Home"
"FS" = "win95"
[Drive Z]
"Type" = "network"
"Path" = "/"
"Label" = "Root"
"FS" = "win95"
[wine]
"Windows" = "C:\\Windows"
"System" = "C:\\Windows\\System"
"Temp" = "C:\\Windows\\Temp"
"Path" = "C:\\Windows;C:\\Windows\\System;X:\\;Y:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
;"ShowDirSymlinks" = "1"
;"ShowDotFiles" = "1"
"ShellLinker" = "wineshelllink"
# <wineconf>
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)
"Windows" = "winxp"
; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
"msvcrt" = "native,builtin"
"msi" = "native,builtin"
; default for all other dlls
"*" = "builtin, native"
[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Use the take focus protocol
"UseTakeFocus" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;"Synchronous" = "Y"
;
; Use the Render extension to render client side fonts (default "Y")
;;"ClientSideWithRender" = "Y"
; Fallback on X core requests to render client side fonts (default "Y")
;;"ClientSideWithCore" = "Y"
; Set both of the previous two to "N" in order to force X11 server side fonts
;
; Anti-alias fonts if using the Render extension (default "Y")
;;"ClientSideAntiAliasWithRender" = "Y"
; Anti-alias fonts if using core requests fallback (default "Y")
;;"ClientSideAntiAliasWithCore" = "Y"
;
[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"
;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"
; the TrueType font dirs you want to make accessible to wine
[FontDirs]
"dir1" = "/usr/X11R6/lib/X11/fonts/truetype"
"dir2" = "/usr/X11R6/lib/X11/fonts/TrueType"
"dir3" = "/usr/X11R6/lib/X11/fonts/TT"
[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"
[parallelports]
"Lpt1" = "/dev/lp0"
[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"
[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"
[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"
[Debug]
"RelayExclude" = "RtlLeaveCriticalSection;RtlEnterCriticalSection;TlsGetValue;_EnterSysLevel;_LeaveSysLevel;RtlAllocateHeap;RtlFreeHeap;RtlReAllocateHeap;LOCAL_Lock;LOCAL_Unlock"
;"RelayInclude" = "user32.CreateWindowA"
;"RelayFromExclude" = "user32;x11drv"
;"RelayFromInclude" = "sol.exe"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"
[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Where to find the global registries
;"GlobalRegistryDir" = "/etc";
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"
[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Win95"
[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"
; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/enscript/afm"
"3" = "/usr/X11R6/lib/X11/fonts/Type1"
"4" = "/usr/lib/wine/afm"
[WinMM]
; Uncomment the "Drivers" line matching your sound setting.
"Drivers" = "wineoss.drv" ; default for most common configurations
;"Drivers" = "winearts.drv" ; for KDE
;"Drivers" = "winealsa.drv" ; for ALSA users
;"Drivers" = "winejack.drv" ; for Jack sound server
;"Drivers" = "winenas.drv" ; for NAS sound system
;"Drivers" = "wineaudioio.drv" ; for Solaris machines
;"Drivers" = "" ; to disable sound
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"
[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"
;; Forces emulation mode (using wave api)
;"HardwareAcceleration" = "Emulation"
;; Sets default playback device (0 - number of devices - 1)
;"DefaultPlayback" = "0" ; use first device (/dev/dsp)
;"DefaultPlayback" = "1" ; use second device (/dev/dsp1)
;"DefaultPlayback" = "2" ; use third device (/dev/dsp2)
;; Sets default capture device (0 - number of devices - 1)
;"DefaultCapture" = "0" ; use first device (/dev/dsp)
;"DefaultCapture" = "1" ; use second device (/dev/dsp1)
;"DefaultCapture" = "2" ; use third device (/dev/dsp2)
[Network]
;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y").
;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs
;; from the Unix host name. You'll need to set ComputerName in
;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ComputerName\ComputerName, too.
;"UseDnsComputerName" = "N"
[ppd]
"generic" = "/usr/lib/wine/ppd/generic.ppd"
# </wineconf>
#########################################
# Application dependent sections follow #
#########################################
; 3 InstallShield versions who like to put their full screen window in front,
; without any chance to switch to another X11 application.
; So just catch them in a desktop window.
[AppDefaults\\_INS0432._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS0466._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS0576._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS5176._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS5576._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\nlnotes.exe\\x11drv]
;"Desktop" = "800x600"
"Synchronous" = "Y"
[AppDefaults\\notes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"
[AppDefaults\\nlnotes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"
[AppDefaults\\nhldaemn.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"
hier mal meine wine-config:
hoffentlich hilft es

--------------------------------------------------------------------------------------------------
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive C]
"Path" = "%HOME%/.wine/fake_windows"
"Type" = "hd"
"Label" = "fake_windows"
"Filesystem" = "win95"
;[Drive D]
;"Type" = "hd"
;"Path" = "/mnt/dvd"
;"Label" = "dvd"
;"FS" = ""
;"Device" = "/dev/hdd"
[Drive D]
"Path" = "/mnt/dvd"
"Type" = "cdrom"
"Label" = "DVD-R"
"Filesystem" = "win95"
"Device" = "/dev/hdd"
[Drive X]
"Type" = "hd"
"Path" = "/root/.wine/.tmp"
"Label" = "Tmp Drive"
;"FS" = "win95"
[Drive Y]
"Type" = "network"
"Path" = "%HOME%"
"Label" = "Home"
"FS" = "win95"
[Drive Z]
"Type" = "network"
"Path" = "/"
"Label" = "Root"
"FS" = "win95"
[wine]
"Windows" = "C:\\Windows"
"System" = "C:\\Windows\\System"
"Temp" = "C:\\Windows\\Temp"
"Path" = "C:\\Windows;C:\\Windows\\System;X:\\;Y:\\"
"Profile" = "c:\\windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
;"ShowDirSymlinks" = "1"
;"ShowDotFiles" = "1"
"ShellLinker" = "wineshelllink"
# <wineconf>
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)
"Windows" = "winxp"
; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
"msvcrt" = "native,builtin"
"msi" = "native,builtin"
; default for all other dlls
"*" = "builtin, native"
[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Use the take focus protocol
"UseTakeFocus" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;"Synchronous" = "Y"
;
; Use the Render extension to render client side fonts (default "Y")
;;"ClientSideWithRender" = "Y"
; Fallback on X core requests to render client side fonts (default "Y")
;;"ClientSideWithCore" = "Y"
; Set both of the previous two to "N" in order to force X11 server side fonts
;
; Anti-alias fonts if using the Render extension (default "Y")
;;"ClientSideAntiAliasWithRender" = "Y"
; Anti-alias fonts if using core requests fallback (default "Y")
;;"ClientSideAntiAliasWithCore" = "Y"
;
[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"
;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"
; the TrueType font dirs you want to make accessible to wine
[FontDirs]
"dir1" = "/usr/X11R6/lib/X11/fonts/truetype"
"dir2" = "/usr/X11R6/lib/X11/fonts/TrueType"
"dir3" = "/usr/X11R6/lib/X11/fonts/TT"
[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"
[parallelports]
"Lpt1" = "/dev/lp0"
[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"
[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"
[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
; "write" = "0x779,0x379,0x280-0x2a0"
[Debug]
"RelayExclude" = "RtlLeaveCriticalSection;RtlEnterCriticalSection;TlsGetValue;_EnterSysLevel;_LeaveSysLevel;RtlAllocateHeap;RtlFreeHeap;RtlReAllocateHeap;LOCAL_Lock;LOCAL_Unlock"
;"RelayInclude" = "user32.CreateWindowA"
;"RelayFromExclude" = "user32;x11drv"
;"RelayFromInclude" = "sol.exe"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"
[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Where to find the global registries
;"GlobalRegistryDir" = "/etc";
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"
[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Win95"
[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"
; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/enscript/afm"
"3" = "/usr/X11R6/lib/X11/fonts/Type1"
"4" = "/usr/lib/wine/afm"
[WinMM]
; Uncomment the "Drivers" line matching your sound setting.
"Drivers" = "wineoss.drv" ; default for most common configurations
;"Drivers" = "winearts.drv" ; for KDE
;"Drivers" = "winealsa.drv" ; for ALSA users
;"Drivers" = "winejack.drv" ; for Jack sound server
;"Drivers" = "winenas.drv" ; for NAS sound system
;"Drivers" = "wineaudioio.drv" ; for Solaris machines
;"Drivers" = "" ; to disable sound
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"
[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"
;; Forces emulation mode (using wave api)
;"HardwareAcceleration" = "Emulation"
;; Sets default playback device (0 - number of devices - 1)
;"DefaultPlayback" = "0" ; use first device (/dev/dsp)
;"DefaultPlayback" = "1" ; use second device (/dev/dsp1)
;"DefaultPlayback" = "2" ; use third device (/dev/dsp2)
;; Sets default capture device (0 - number of devices - 1)
;"DefaultCapture" = "0" ; use first device (/dev/dsp)
;"DefaultCapture" = "1" ; use second device (/dev/dsp1)
;"DefaultCapture" = "2" ; use third device (/dev/dsp2)
[Network]
;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y").
;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs
;; from the Unix host name. You'll need to set ComputerName in
;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ComputerName\ComputerName, too.
;"UseDnsComputerName" = "N"
[ppd]
"generic" = "/usr/lib/wine/ppd/generic.ppd"
# </wineconf>
#########################################
# Application dependent sections follow #
#########################################
; 3 InstallShield versions who like to put their full screen window in front,
; without any chance to switch to another X11 application.
; So just catch them in a desktop window.
[AppDefaults\\_INS0432._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS0466._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS0576._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS5176._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\_INS5576._MP\\x11drv]
"Desktop" = "640x480"
[AppDefaults\\nlnotes.exe\\x11drv]
;"Desktop" = "800x600"
"Synchronous" = "Y"
[AppDefaults\\notes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"
[AppDefaults\\nlnotes.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"
[AppDefaults\\nhldaemn.exe\\DllOverrides]
"msvcrt" = "native"
"msvcrt40" = "native"
"crtdll" = "native"
"imagehlp" = "native"
"rnaph" = "native"
My Computer ei Open Files
Ich habe doch noch ein Problem.
Das das Öffnen und schrumpfen von DVDs funktioniert zwar.
Wenn ich aber vorhandene Dateien schrumpfen will (Der Knopf rechts neben "Open DVD"), dann öffnet sich aber ein FileOpen-Dialog, in dem mir nur "Desktop" mit einem
"+" davor angezeigt wird,
"My Computer" fehlt aber, so dass ich keine Dateien oder Verzeichnisse öffnen kann.
Klicke ich auf "Re-Author" dann gibt es "My Computer" aber.
Und in anderen Programmen, z.B CDex geht es auch.
Hat jemand hierzu eine Idee?
Das das Öffnen und schrumpfen von DVDs funktioniert zwar.
Wenn ich aber vorhandene Dateien schrumpfen will (Der Knopf rechts neben "Open DVD"), dann öffnet sich aber ein FileOpen-Dialog, in dem mir nur "Desktop" mit einem
"+" davor angezeigt wird,
"My Computer" fehlt aber, so dass ich keine Dateien oder Verzeichnisse öffnen kann.
Klicke ich auf "Re-Author" dann gibt es "My Computer" aber.
Und in anderen Programmen, z.B CDex geht es auch.
Hat jemand hierzu eine Idee?
"My Computer" Fehler
Ich habe das gleiche Problem mit Wine (version 20040408), aber mit Crossover Office 2.1.0 ist alles OK. (Leider muss man für CXOffice bezahlen.)
Jetzt habe ich noch ein Problem: Es gibt eine "Slider"-Kontrolle unter "Compression Settings." Wenn ich "Custom Ratio" wähle, kann ich die Kontrolle nur bis etwa 90% bewegen. Aber mit Windows, kann ich die Kontrolle bis 40% oder 50% bewegen.
Hat jemand eine Lösung?
Jetzt habe ich noch ein Problem: Es gibt eine "Slider"-Kontrolle unter "Compression Settings." Wenn ich "Custom Ratio" wähle, kann ich die Kontrolle nur bis etwa 90% bewegen. Aber mit Windows, kann ich die Kontrolle bis 40% oder 50% bewegen.
Hat jemand eine Lösung?
"My Computer" fehlt
Benutze Debian wine version: 20040309, habe auch das Problem, das der "My Computer"-Eintrag neuerdings fehlt. Bei der Version die ich davor hatte funktionierte es noch. Hat jemand eine Idee wie man das analysieren kann, wenn es keine Fehlermeldung gibt?
"MY Computer" fehlt
So habe jetzt wieder die alten Debian pakete mit der wine version vom
20040121 installliert, da gibt es einen Fehler beim starten in der Datei
UXTHEME.DLL.so, wenn ich die aus der Wine Version vom 2004030, nehme, funktrioniert es wieder, vielleicht kommt ihr ja auch an ältere Suse-Pakete.
Gruß
Frufo
20040121 installliert, da gibt es einen Fehler beim starten in der Datei
UXTHEME.DLL.so, wenn ich die aus der Wine Version vom 2004030, nehme, funktrioniert es wieder, vielleicht kommt ihr ja auch an ältere Suse-Pakete.
Gruß
Frufo