Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

Drucker reagiert nicht - was nun?

Alles rund um Hardware, die unter Linux läuft oder zum Laufen gebracht werden soll

Moderator: Moderatoren

Antworten
Schwartmann
Newbie
Newbie
Beiträge: 33
Registriert: 11. Mär 2005, 00:03
Wohnort: Köln
Kontaktdaten:

Drucker reagiert nicht - was nun?

Beitrag von Schwartmann »

Hallo,

folgendes Problem nach einer Neuinstallation von Suse 9.2:

Mein Drucker (Epson EPL-6200L), der vor der Neuinstallation noch problemlos lief, gibt nun unter Suse keinen Mucks mehr von sich, obwohl er angeblich korrekt mit dem passenden PPS installiert und bereit ist. Doch die Druckaufträge werden nicht abgearbeitet.


Hier das Fehlerlog. Könnt Ihr damit etwas anfangen?


I [13/Mar/2005:18:22:54 +0100] Scheduler shutting down normally.
I [13/Mar/2005:18:22:55 +0100] Listening to 0:631
E [13/Mar/2005:18:22:55 +0100] Unknown Location directive # on line 834.
I [13/Mar/2005:18:22:55 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [13/Mar/2005:18:22:55 +0100] Configured for up to 100 clients.
I [13/Mar/2005:18:22:55 +0100] Allowing up to 100 client connections per host.
I [13/Mar/2005:18:22:55 +0100] Full reload is required.
I [13/Mar/2005:18:22:55 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3764 PPDs...
I [13/Mar/2005:18:22:55 +0100] LoadPPDs: No new or changed PPDs...
I [13/Mar/2005:18:22:55 +0100] Full reload complete.
I [13/Mar/2005:18:22:55 +0100] Setting y2test device-uri to "usb:/dev/usb/lp0" (was "file:/dev/null".)
I [13/Mar/2005:18:22:55 +0100] Setting y2test printer-is-accepting-jobs to 1 (was 0.)
I [13/Mar/2005:18:22:55 +0100] Setting y2test printer-state to 3 (was 5.)
I [13/Mar/2005:18:22:55 +0100] Saving printers.conf...
I [13/Mar/2005:18:22:55 +0100] New printer 'y2test' added by 'root'.
I [13/Mar/2005:18:22:56 +0100] Adding start banner page "none" to job 1.
I [13/Mar/2005:18:22:56 +0100] Adding end banner page "none" to job 1.
I [13/Mar/2005:18:22:56 +0100] Job 1 queued on 'y2test' by 'root'.
I [13/Mar/2005:18:22:56 +0100] Started filter /usr/lib64/cups/filter/texttops (PID 23968) for job 1.
I [13/Mar/2005:18:22:56 +0100] Started filter /usr/lib64/cups/filter/pstops (PID 23969) for job 1.
I [13/Mar/2005:18:22:56 +0100] Started filter /usr/lib64/cups/filter/foomatic-rip (PID 23970) for job 1.
I [13/Mar/2005:18:22:56 +0100] Started backend /usr/lib64/cups/backend/usb (PID 23971) for job 1.
E [13/Mar/2005:18:22:56 +0100] PID 23970 stopped with status 3!
I [13/Mar/2005:18:22:56 +0100] Hint: Try setting the LogLevel to "debug" to find out more.


Andreas
Benutzeravatar
misiu
Moderator
Moderator
Beiträge: 4001
Registriert: 8. Mär 2004, 11:27
Wohnort: bei Schweinfurt

Beitrag von misiu »

Setze die Variable auf debug in cupsd.conf (/etc/cups).
Suche nach diesem Abschnitt:

# LogLevel: controls the number of messages logged to the ErrorLog
# file and can be one of the following:
#
# debug2 Log everything.
# debug Log almost everything.
# info Log all requests and state changes.
# warn Log errors and warnings.
# error Log only errors.
# none Log nothing.
#

LogLevel info

sprich LogLevel debug

Dann kriegst du mehr Infos , was schief gelaufen ist.

Dann kanst du noch eine neue PPD-Datei für diesen
Drucker installieren:
http://www.linuxprinting.org/show_print ... -EPL-6200L

MfG
misiu
Schwartmann
Newbie
Newbie
Beiträge: 33
Registriert: 11. Mär 2005, 00:03
Wohnort: Köln
Kontaktdaten:

Beitrag von Schwartmann »

Diese PPD Datei benutze ich ja bereits!

Ich habe mal das Error-Loggen auf debug2 gestellt.

Hier ist die (leider lange) Ausgabe vom Systemstart bis zum Druckversuch zwei Minuten später. Kann da vielleicht jemand etwas mit anfangen?

I [14/Mar/2005:20:13:26 +0100] Listening to 0:631
D [14/Mar/2005:20:13:26 +0100] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL'
D [14/Mar/2005:20:13:26 +0100] AllowHost: CUPS_INTERNAL_BROWSE_ACL allow @LOCAL
D [14/Mar/2005:20:13:26 +0100] DenyIP: CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000
D [14/Mar/2005:20:13:26 +0100] AddLocation: added location '/'
D [14/Mar/2005:20:13:26 +0100] DenyIP: / deny 00000000/00000000
D [14/Mar/2005:20:13:26 +0100] AllowIP: / allow 7f000001/ffffffff
D [14/Mar/2005:20:13:26 +0100] AllowIP: / allow 7f000002/ffffffff
D [14/Mar/2005:20:13:26 +0100] AllowHost: / allow @LOCAL
D [14/Mar/2005:20:13:26 +0100] AddLocation: added location '/admin'
E [14/Mar/2005:20:13:26 +0100] Unknown Location directive # on line 834.
D [14/Mar/2005:20:13:26 +0100] DenyIP: /admin deny 00000000/00000000
D [14/Mar/2005:20:13:26 +0100] AllowIP: /admin allow 7f000001/ffffffff
I [14/Mar/2005:20:13:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [14/Mar/2005:20:13:26 +0100] Configured for up to 100 clients.
I [14/Mar/2005:20:13:26 +0100] Allowing up to 100 client connections per host.
I [14/Mar/2005:20:13:26 +0100] Full reload is required.
D [14/Mar/2005:20:13:26 +0100] LoadAllPrinters: Loading printer epl6200l...
d [14/Mar/2005:20:13:26 +0100] AddPrinter("epl6200l")
d [14/Mar/2005:20:13:26 +0100] Adding filter application/vnd.cups-raw printer/epl6200l 0 -
d [14/Mar/2005:20:13:26 +0100] FindBest: uri = "/printers/epl6200l"...
d [14/Mar/2005:20:13:26 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:13:26 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:13:26 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:13:26 +0100] FindBest: best = "/"
d [14/Mar/2005:20:13:26 +0100] Adding filter application/vnd.cups-postscript printer/epl6200l 0 foomatic-rip
D [14/Mar/2005:20:13:26 +0100] LoadAllPrinters: Loading printer printer...
d [14/Mar/2005:20:13:26 +0100] AddPrinter("printer")
d [14/Mar/2005:20:13:26 +0100] Adding filter application/vnd.cups-raw printer/printer 0 -
d [14/Mar/2005:20:13:26 +0100] FindBest: uri = "/printers/printer"...
d [14/Mar/2005:20:13:26 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:13:26 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:13:26 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:13:26 +0100] FindBest: best = "/"
d [14/Mar/2005:20:13:26 +0100] Adding filter application/vnd.cups-postscript printer/printer 0 foomatic-rip
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "ipp"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "lpd"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "smb"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb://EPSON/EPL-6200L"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp1"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp2"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp3"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp4"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp5"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp6"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp7"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp8"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp9"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp10"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp11"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp12"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp13"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp14"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "usb:/dev/usblp15"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "http"...
D [14/Mar/2005:20:13:26 +0100] LoadDevices: Added device "pipe"...
D [14/Mar/2005:20:13:27 +0100] LoadDevices: Added device "scsi"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "canon:/dev/lp0"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "epson:/dev/lp0"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "epson:/dev/usb/lp0"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "parallel:/dev/lp0"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "novell"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"...
D [14/Mar/2005:20:13:28 +0100] LoadDevices: Added device "socket"...
I [14/Mar/2005:20:13:28 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3764 PPDs...
I [14/Mar/2005:20:13:34 +0100] LoadPPDs: No new or changed PPDs...
D [14/Mar/2005:20:13:34 +0100] LoadAllJobs: Scanning /var/spool/cups...
D [14/Mar/2005:20:13:34 +0100] LoadAllJobs: Loading attributes for job 1...
D [14/Mar/2005:20:13:34 +0100] LoadAllJobs: Loading attributes for job 2...
I [14/Mar/2005:20:13:34 +0100] Full reload complete.
D [14/Mar/2005:20:13:34 +0100] StartListening: NumListeners=1
D [14/Mar/2005:20:13:34 +0100] StartListening: address=00000000 port=631
D [14/Mar/2005:20:13:34 +0100] ResumeListening: setting input bits...
d [14/Mar/2005:20:13:34 +0100] ResumeListening: Adding fd 0 to InputSet...
d [14/Mar/2005:20:13:34 +0100] StartBrowsing: Adding fd 2 to InputSet...
d [14/Mar/2005:20:13:34 +0100] StartServer: Adding fd 3 to InputSet...
d [14/Mar/2005:20:13:34 +0100] AddCert: adding certificate for pid 0
d [14/Mar/2005:20:13:35 +0100] select_timeout: 1 seconds to send browse update
d [14/Mar/2005:20:13:36 +0100] select_timeout: 30 seconds to send browse update
d [14/Mar/2005:20:14:06 +0100] select_timeout: 1 seconds to send browse update
d [14/Mar/2005:20:14:07 +0100] select_timeout: 30 seconds to send browse update
d [14/Mar/2005:20:14:37 +0100] select_timeout: 1 seconds to send browse update
d [14/Mar/2005:20:14:38 +0100] select_timeout: 30 seconds to send browse update
d [14/Mar/2005:20:14:58 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:14:58 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:14:58 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:14:58 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:14:58 +0100] CloseClient: 5
d [14/Mar/2005:20:14:58 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:14:58 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:14:58 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:14:58 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:14:58 +0100] ReadClient: 5 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:14:58 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:14:58 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:14:58 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:14:58 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:14:58 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: best = "/"
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:14:58 +0100] POST /printers/
d [14/Mar/2005:20:14:58 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 109, con->file = -1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 4002
d [14/Mar/2005:20:14:58 +0100] get_printers(0x2a96a56010[5], 0)
d [14/Mar/2005:20:14:58 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:14:58 +0100] add_queued_job_count(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799190, 0x550310, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799190, 0x5504f0[printer-name,4,42])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799190, 0x5461b0, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x559a80[printer])
d [14/Mar/2005:20:14:58 +0100] add_queued_job_count(0x2a96a56010[5], 0x559a80[printer])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799190, 0x55d2d0, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799190, 0x55a900[printer-name,4,42])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799190, 0x5461b0, 0x799080, 0)
D [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: 5 status_code=1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:14:58 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:14:58 +0100] AcceptClient(lis=0x544700) 0 NumClients = 1
D [14/Mar/2005:20:14:58 +0100] AcceptClient: 7 from localhost:631.
d [14/Mar/2005:20:14:58 +0100] AcceptClient: Adding fd 7 to InputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:14:58 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:14:58 +0100] CloseClient: 5
d [14/Mar/2005:20:14:58 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 7, used=0, file=-1
D [14/Mar/2005:20:14:58 +0100] ReadClient: 7 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:14:58 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:14:58 +0100] decode_auth: 7 username=""
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:14:58 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:14:58 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:14:58 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: best = "/"
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:14:58 +0100] POST /printers/
d [14/Mar/2005:20:14:58 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:14:58 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 221, con->file = -1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest(0x2a96a56010[7]): operation_id = 4002
d [14/Mar/2005:20:14:58 +0100] get_printers(0x2a96a56010[7], 0)
d [14/Mar/2005:20:14:58 +0100] add_printer_state_reasons(0x2a96a56010[7], 0x552dc0[epl6200l])
d [14/Mar/2005:20:14:58 +0100] add_queued_job_count(0x2a96a56010[7], 0x552dc0[epl6200l])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799240, 0x550310, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x550350[printer-uri-supported,4,45])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x5504f0[printer-name,4,42])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x550570[printer-location,4,41])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x55ebb0[printer-type,4,23])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799240, 0x5461b0, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] add_printer_state_reasons(0x2a96a56010[7], 0x559a80[printer])
d [14/Mar/2005:20:14:58 +0100] add_queued_job_count(0x2a96a56010[7], 0x559a80[printer])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799240, 0x55d2d0, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x54fe10[printer-uri-supported,4,45])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x55a900[printer-name,4,42])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x55a980[printer-location,4,41])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799240, 0x554e70[printer-type,4,23])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799240, 0x5461b0, 0x799080, 0)
D [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: 7 status_code=1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: Adding fd 7 to OutputSet...
d [14/Mar/2005:20:14:58 +0100] WriteClient: Removing fd 7 from OutputSet...
d [14/Mar/2005:20:14:58 +0100] AcceptClient(lis=0x544700) 0 NumClients = 1
D [14/Mar/2005:20:14:58 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:14:58 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:14:58 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:14:58 +0100] CloseClient: 7
d [14/Mar/2005:20:14:58 +0100] CloseClient: Removing fd 7 from InputSet and OutputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:14:58 +0100] ReadClient: 5 POST /classes/ HTTP/1.1
d [14/Mar/2005:20:14:58 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:14:58 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: con->uri = "/classes/"
d [14/Mar/2005:20:14:58 +0100] FindBest: uri = "/classes/"...
d [14/Mar/2005:20:14:58 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:14:58 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: best = "/"
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:14:58 +0100] POST /classes/
d [14/Mar/2005:20:14:58 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 221, con->file = -1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 4005
d [14/Mar/2005:20:14:58 +0100] get_printers(0x2a96a56010[5], 1)
D [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: 5 status_code=1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:14:58 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:14:58 +0100] AcceptClient(lis=0x544700) 0 NumClients = 1
D [14/Mar/2005:20:14:58 +0100] AcceptClient: 7 from localhost:631.
d [14/Mar/2005:20:14:58 +0100] AcceptClient: Adding fd 7 to InputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:14:58 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:14:58 +0100] CloseClient: 5
d [14/Mar/2005:20:14:58 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 7, used=0, file=-1
D [14/Mar/2005:20:14:58 +0100] ReadClient: 7 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:14:58 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:14:58 +0100] decode_auth: 7 username=""
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:14:58 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:14:58 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:14:58 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: best = "/"
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:14:58 +0100] POST /printers/
d [14/Mar/2005:20:14:58 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:14:58 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 109, con->file = -1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest(0x2a96a56010[7]): operation_id = 4001
d [14/Mar/2005:20:14:58 +0100] get_default(0x2a96a56010[7])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799190, 0x550310, 0x799080, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x799190, 0x5504f0[printer-name,4,42])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x799190, 0x5461b0, 0x799080, 0)
D [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: 7 status_code=1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: Adding fd 7 to OutputSet...
d [14/Mar/2005:20:14:58 +0100] WriteClient: Removing fd 7 from OutputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:14:58 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:14:58 +0100] CloseClient: 7
d [14/Mar/2005:20:14:58 +0100] CloseClient: Removing fd 7 from InputSet and OutputSet...
d [14/Mar/2005:20:14:58 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:14:58 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:14:58 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:14:58 +0100] ReadClient: 5 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:14:58 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:14:58 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:14:58 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:14:58 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:14:58 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:14:58 +0100] FindBest: best = "/"
d [14/Mar/2005:20:14:58 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:14:58 +0100] POST /printers/
d [14/Mar/2005:20:14:58 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 369, con->file = -1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 000b
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: URI="ipp://linux:631/printers/epl6200l"
d [14/Mar/2005:20:14:58 +0100] get_printer_attrs(0x2a96a56010[5], ipp://linux:631/printers/epl6200l)
d [14/Mar/2005:20:14:58 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:14:58 +0100] add_queued_job_count(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x7993f0, 0x550310, 0x7991a0, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x550600[printer-info,4,41])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x550710[job-quota-period,4,21])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x550770[job-k-limit,4,21])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x5507d0[job-page-limit,4,21])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x550830[job-sheets-default,4,42])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x5508e0[device-uri,4,45])
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x560ea0[printer-make-and-model,4,41])
d [14/Mar/2005:20:14:58 +0100] copy_attrs(0x7993f0, 0x5461b0, 0x7991a0, 0)
d [14/Mar/2005:20:14:58 +0100] copy_attribute(0x7993f0, 0x559ff0[job-sheets-supported,4,42])
D [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: 5 status_code=1
d [14/Mar/2005:20:14:58 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:14:58 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:14:58 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:14:58 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:14:58 +0100] CloseClient: 5
d [14/Mar/2005:20:14:58 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:14:59 +0100] select_timeout: 9 seconds to send browse update
d [14/Mar/2005:20:15:02 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:15:02 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:15:02 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:15:02 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:02 +0100] ReadClient: 5 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:15:02 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:02 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:02 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:15:02 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:15:02 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:02 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:02 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:02 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:02 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:02 +0100] POST /printers/
d [14/Mar/2005:20:15:02 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:15:02 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 369, con->file = -1
d [14/Mar/2005:20:15:02 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 000b
d [14/Mar/2005:20:15:02 +0100] ProcessIPPRequest: URI="ipp://linux:631/printers/epl6200l"
d [14/Mar/2005:20:15:02 +0100] get_printer_attrs(0x2a96a56010[5], ipp://linux:631/printers/epl6200l)
d [14/Mar/2005:20:15:02 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:02 +0100] add_queued_job_count(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:02 +0100] copy_attrs(0x7993f0, 0x550310, 0x7991a0, 0)
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x550600[printer-info,4,41])
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x550710[job-quota-period,4,21])
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x550770[job-k-limit,4,21])
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x5507d0[job-page-limit,4,21])
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x550830[job-sheets-default,4,42])
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x5508e0[device-uri,4,45])
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x560ea0[printer-make-and-model,4,41])
d [14/Mar/2005:20:15:02 +0100] copy_attrs(0x7993f0, 0x5461b0, 0x7991a0, 0)
d [14/Mar/2005:20:15:02 +0100] copy_attribute(0x7993f0, 0x559ff0[job-sheets-supported,4,42])
D [14/Mar/2005:20:15:02 +0100] ProcessIPPRequest: 5 status_code=1
d [14/Mar/2005:20:15:02 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:02 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:02 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:15:02 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:15:02 +0100] CloseClient: 5
d [14/Mar/2005:20:15:02 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:15:03 +0100] select_timeout: 5 seconds to send browse update
d [14/Mar/2005:20:15:06 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:15:06 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:15:06 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:15:06 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:06 +0100] ReadClient: 5 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:15:06 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:06 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:06 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:15:06 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:15:06 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:06 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:06 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:06 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:06 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:06 +0100] POST /printers/
d [14/Mar/2005:20:15:06 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:15:06 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 368, con->file = -1
d [14/Mar/2005:20:15:06 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 000b
d [14/Mar/2005:20:15:06 +0100] ProcessIPPRequest: URI="ipp://linux:631/printers/printer"
d [14/Mar/2005:20:15:06 +0100] get_printer_attrs(0x2a96a56010[5], ipp://linux:631/printers/printer)
d [14/Mar/2005:20:15:06 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x559a80[printer])
d [14/Mar/2005:20:15:06 +0100] add_queued_job_count(0x2a96a56010[5], 0x559a80[printer])
d [14/Mar/2005:20:15:06 +0100] copy_attrs(0x7993f0, 0x55d2d0, 0x7991a0, 0)
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x557ac0[printer-info,4,41])
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x557bd0[job-quota-period,4,21])
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x5586f0[job-k-limit,4,21])
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x558750[job-page-limit,4,21])
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x5587b0[job-sheets-default,4,42])
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x5582b0[device-uri,4,45])
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x55eb30[printer-make-and-model,4,41])
d [14/Mar/2005:20:15:06 +0100] copy_attrs(0x7993f0, 0x5461b0, 0x7991a0, 0)
d [14/Mar/2005:20:15:06 +0100] copy_attribute(0x7993f0, 0x559ff0[job-sheets-supported,4,42])
D [14/Mar/2005:20:15:06 +0100] ProcessIPPRequest: 5 status_code=1
d [14/Mar/2005:20:15:06 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:06 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:06 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:15:06 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:15:06 +0100] CloseClient: 5
d [14/Mar/2005:20:15:06 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:15:07 +0100] select_timeout: 1 seconds to send browse update
d [14/Mar/2005:20:15:08 +0100] select_timeout: 1 seconds to send browse update
d [14/Mar/2005:20:15:09 +0100] select_timeout: 30 seconds to send browse update
d [14/Mar/2005:20:15:11 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:15:11 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:15:11 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:15:11 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:11 +0100] ReadClient: 5 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:15:11 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:11 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:11 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:15:11 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:15:11 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:11 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:11 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:11 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:11 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:11 +0100] POST /printers/
d [14/Mar/2005:20:15:11 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:15:11 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 369, con->file = -1
d [14/Mar/2005:20:15:11 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 000b
d [14/Mar/2005:20:15:11 +0100] ProcessIPPRequest: URI="ipp://linux:631/printers/epl6200l"
d [14/Mar/2005:20:15:11 +0100] get_printer_attrs(0x2a96a56010[5], ipp://linux:631/printers/epl6200l)
d [14/Mar/2005:20:15:11 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:11 +0100] add_queued_job_count(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:11 +0100] copy_attrs(0x7993f0, 0x550310, 0x7991a0, 0)
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x550600[printer-info,4,41])
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x550710[job-quota-period,4,21])
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x550770[job-k-limit,4,21])
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x5507d0[job-page-limit,4,21])
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x550830[job-sheets-default,4,42])
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x5508e0[device-uri,4,45])
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x560ea0[printer-make-and-model,4,41])
d [14/Mar/2005:20:15:11 +0100] copy_attrs(0x7993f0, 0x5461b0, 0x7991a0, 0)
d [14/Mar/2005:20:15:11 +0100] copy_attribute(0x7993f0, 0x559ff0[job-sheets-supported,4,42])
D [14/Mar/2005:20:15:11 +0100] ProcessIPPRequest: 5 status_code=1
d [14/Mar/2005:20:15:11 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:11 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:11 +0100] ReadClient: 5, used=0, file=-1
d [14/Mar/2005:20:15:11 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:15:11 +0100] CloseClient: 5
d [14/Mar/2005:20:15:11 +0100] CloseClient: Removing fd 5 from InputSet and OutputSet...
d [14/Mar/2005:20:15:12 +0100] select_timeout: 27 seconds to send browse update
d [14/Mar/2005:20:15:18 +0100] AcceptClient(lis=0x544700) 0 NumClients = 0
D [14/Mar/2005:20:15:18 +0100] AcceptClient: 5 from localhost:631.
d [14/Mar/2005:20:15:18 +0100] AcceptClient: Adding fd 5 to InputSet...
d [14/Mar/2005:20:15:18 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:18 +0100] ReadClient: 5 POST / HTTP/1.1
d [14/Mar/2005:20:15:18 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:18 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:18 +0100] IsAuthorized: con->uri = "/"
d [14/Mar/2005:20:15:18 +0100] FindBest: uri = "/"...
d [14/Mar/2005:20:15:18 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:18 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:18 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:18 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:18 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:18 +0100] POST /
d [14/Mar/2005:20:15:18 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:15:18 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 200, con->file = -1
d [14/Mar/2005:20:15:18 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 000b
d [14/Mar/2005:20:15:18 +0100] ProcessIPPRequest: URI="ipp://localhost/printers/epl6200l"
d [14/Mar/2005:20:15:18 +0100] get_printer_attrs(0x2a96a56010[5], ipp://localhost/printers/epl6200l)
d [14/Mar/2005:20:15:18 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:18 +0100] add_queued_job_count(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:18 +0100] copy_attrs(0x7992f0, 0x550310, (nil), 0)
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550350[printer-uri-supported,4,45])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5503e0[uri-authentication-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550470[uri-security-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5504f0[printer-name,4,42])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550570[printer-location,4,41])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550600[printer-info,4,41])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550680[printer-more-info,4,45])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550710[job-quota-period,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550770[job-k-limit,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5507d0[job-page-limit,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550830[job-sheets-default,4,42])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5508e0[device-uri,4,45])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5609f0[color-supported,4,22])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x560a50[pages-per-minute,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x560ea0[printer-make-and-model,4,41])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x560f40[media-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x550aa0[media-default,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x558050[finishings-supported,4,23])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x559a40[finishings-default,4,23])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x55ebb0[printer-type,4,23])
d [14/Mar/2005:20:15:18 +0100] copy_attrs(0x7992f0, 0x5461b0, (nil), 0)
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5544f0[pdl-override-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553e60[ipp-versions-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x54ae30[operations-supported,4,23])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5542a0[multiple-document-jobs-supported,4,22])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5541a0[multiple-operation-time-out,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5533a0[multiple-document-handling-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x554090[charset-configured,4,47])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553500[charset-supported,4,47])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x554030[natural-language-configured,4,48])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553fd0[generated-natural-language-supported,4,48])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553f70[document-format-default,4,49])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553c10[document-format-supported,4,80000049])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x55a7d0[compression-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553f10[job-priority-supported,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553b80[job-priority-default,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553a60[copies-supported,4,33])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x554200[copies-default,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x553330[page-ranges-supported,4,22])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5540f0[number-up-supported,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x54b030[number-up-default,4,21])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x5579d0[orientation-requested-supported,4,23])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x554570[orientation-requested-default,4,23])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x554310[job-hold-until-supported,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x561460[job-hold-until-default,4,44])
d [14/Mar/2005:20:15:18 +0100] copy_attribute(0x7992f0, 0x559ff0[job-sheets-supported,4,42])
D [14/Mar/2005:20:15:18 +0100] ProcessIPPRequest: 5 status_code=0
d [14/Mar/2005:20:15:18 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:18 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:18 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:18 +0100] ReadClient: 5 GET /printers/epl6200l.ppd HTTP/1.1
d [14/Mar/2005:20:15:18 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:18 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:18 +0100] IsAuthorized: con->uri = "/printers/epl6200l.ppd"
d [14/Mar/2005:20:15:18 +0100] FindBest: uri = "/printers/epl6200l"...
d [14/Mar/2005:20:15:18 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:18 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:18 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:18 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:18 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:18 +0100] get_file: 5 filename=/etc/cups/ppd/epl6200l.ppd size=12064
d [14/Mar/2005:20:15:18 +0100] IsCGI(con=0x2a96a56010, filename="/etc/cups/ppd/epl6200l.ppd", filestats=0x7fbfff3120, type=text/plain)
d [14/Mar/2005:20:15:18 +0100] IsCGI: Returning 0...
D [14/Mar/2005:20:15:18 +0100] SendFile: 5 file=7
d [14/Mar/2005:20:15:18 +0100] SendFile: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 1824 bytes
d [14/Mar/2005:20:15:18 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:18 +0100] WriteClient: 5 Closing data file 7.
d [14/Mar/2005:20:15:19 +0100] select_timeout: 20 seconds to send browse update
d [14/Mar/2005:20:15:32 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:32 +0100] ReadClient: 5 POST / HTTP/1.1
d [14/Mar/2005:20:15:32 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:32 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:32 +0100] IsAuthorized: con->uri = "/"
d [14/Mar/2005:20:15:32 +0100] FindBest: uri = "/"...
d [14/Mar/2005:20:15:32 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:32 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:32 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:32 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:32 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:32 +0100] POST /
d [14/Mar/2005:20:15:32 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:15:32 +0100] ReadClient: 5 con->data_encoding = length, con->data_remaining = 200, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest(0x2a96a56010[5]): operation_id = 000b
d [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest: URI="ipp://localhost/printers/epl6200l"
d [14/Mar/2005:20:15:32 +0100] get_printer_attrs(0x2a96a56010[5], ipp://localhost/printers/epl6200l)
d [14/Mar/2005:20:15:32 +0100] add_printer_state_reasons(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:32 +0100] add_queued_job_count(0x2a96a56010[5], 0x552dc0[epl6200l])
d [14/Mar/2005:20:15:32 +0100] copy_attrs(0x7992f0, 0x550310, (nil), 0)
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550350[printer-uri-supported,4,45])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5503e0[uri-authentication-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550470[uri-security-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5504f0[printer-name,4,42])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550570[printer-location,4,41])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550600[printer-info,4,41])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550680[printer-more-info,4,45])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550710[job-quota-period,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550770[job-k-limit,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5507d0[job-page-limit,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550830[job-sheets-default,4,42])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5508e0[device-uri,4,45])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5609f0[color-supported,4,22])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x560a50[pages-per-minute,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x560ea0[printer-make-and-model,4,41])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x560f40[media-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x550aa0[media-default,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x558050[finishings-supported,4,23])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x559a40[finishings-default,4,23])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x55ebb0[printer-type,4,23])
d [14/Mar/2005:20:15:32 +0100] copy_attrs(0x7992f0, 0x5461b0, (nil), 0)
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5544f0[pdl-override-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553e60[ipp-versions-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x54ae30[operations-supported,4,23])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5542a0[multiple-document-jobs-supported,4,22])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5541a0[multiple-operation-time-out,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5533a0[multiple-document-handling-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x554090[charset-configured,4,47])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553500[charset-supported,4,47])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x554030[natural-language-configured,4,48])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553fd0[generated-natural-language-supported,4,48])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553f70[document-format-default,4,49])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553c10[document-format-supported,4,80000049])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x55a7d0[compression-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553f10[job-priority-supported,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553b80[job-priority-default,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553a60[copies-supported,4,33])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x554200[copies-default,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x553330[page-ranges-supported,4,22])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5540f0[number-up-supported,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x54b030[number-up-default,4,21])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x5579d0[orientation-requested-supported,4,23])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x554570[orientation-requested-default,4,23])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x554310[job-hold-until-supported,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x561460[job-hold-until-default,4,44])
d [14/Mar/2005:20:15:32 +0100] copy_attribute(0x7992f0, 0x559ff0[job-sheets-supported,4,42])
D [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest: 5 status_code=0
d [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:32 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:32 +0100] ReadClient: 5, used=0, file=-1
D [14/Mar/2005:20:15:32 +0100] ReadClient: 5 GET /printers/epl6200l.ppd HTTP/1.1
d [14/Mar/2005:20:15:32 +0100] decode_auth(0x2a96a56010): Authorization string = ""
d [14/Mar/2005:20:15:32 +0100] decode_auth: 5 username=""
d [14/Mar/2005:20:15:32 +0100] IsAuthorized: con->uri = "/printers/epl6200l.ppd"
d [14/Mar/2005:20:15:32 +0100] FindBest: uri = "/printers/epl6200l"...
d [14/Mar/2005:20:15:32 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:32 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:32 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:32 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:32 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:32 +0100] get_file: 5 filename=/etc/cups/ppd/epl6200l.ppd size=12064
d [14/Mar/2005:20:15:32 +0100] IsCGI(con=0x2a96a56010, filename="/etc/cups/ppd/epl6200l.ppd", filestats=0x7fbfff3120, type=text/plain)
d [14/Mar/2005:20:15:32 +0100] IsCGI: Returning 0...
D [14/Mar/2005:20:15:32 +0100] SendFile: 5 file=7
d [14/Mar/2005:20:15:32 +0100] SendFile: Adding fd 5 to OutputSet...
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 2048 bytes
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 1824 bytes
d [14/Mar/2005:20:15:32 +0100] WriteClient: Removing fd 5 from OutputSet...
d [14/Mar/2005:20:15:32 +0100] WriteClient: 5 Closing data file 7.
d [14/Mar/2005:20:15:32 +0100] AcceptClient(lis=0x544700) 0 NumClients = 1
D [14/Mar/2005:20:15:32 +0100] AcceptClient: 7 from localhost:631.
d [14/Mar/2005:20:15:32 +0100] AcceptClient: Adding fd 7 to InputSet...
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
D [14/Mar/2005:20:15:32 +0100] ReadClient: 7 POST /printers/epl6200l HTTP/1.1
d [14/Mar/2005:20:15:32 +0100] decode_auth(0x2a96a58c90): Authorization string = ""
d [14/Mar/2005:20:15:32 +0100] decode_auth: 7 username=""
d [14/Mar/2005:20:15:32 +0100] IsAuthorized: con->uri = "/printers/epl6200l"
d [14/Mar/2005:20:15:32 +0100] FindBest: uri = "/printers/epl6200l"...
d [14/Mar/2005:20:15:32 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:32 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:32 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:32 +0100] FindBest: best = "/"
d [14/Mar/2005:20:15:32 +0100] IsAuthorized: auth = 0, satisfy=0...
d [14/Mar/2005:20:15:32 +0100] POST /printers/epl6200l
d [14/Mar/2005:20:15:32 +0100] CONTENT_TYPE = application/ipp
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151668, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151660, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151631, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151597, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151544, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151512, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151491, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151447, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151431, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151366, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 151336, con->file = -1
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 REQUEST /var/spool/cups/00000000=8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 writing 32768 bytes to 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 118567, con->file = 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 writing 32768 bytes to 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 85799, con->file = 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 writing 32768 bytes to 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 53031, con->file = 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 writing 32768 bytes to 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 con->data_encoding = length, con->data_remaining = 20263, con->file = 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 writing 20263 bytes to 8
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7 Closing data file 8, size = 151335.
d [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest(0x2a96a58c90[7]): operation_id = 0002
d [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest: URI="ipp://localhost:631/printers/epl6200l"
d [14/Mar/2005:20:15:32 +0100] print_job(0x2a96a58c90[7], ipp://localhost:631/printers/epl6200l)
D [14/Mar/2005:20:15:32 +0100] print_job: auto-typing file...
D [14/Mar/2005:20:15:32 +0100] print_job: request file type is application/postscript.
d [14/Mar/2005:20:15:32 +0100] check_quotas(0x2a96a58c90[7], 0x552dc0[epl6200l])
D [14/Mar/2005:20:15:32 +0100] check_quotas: requesting-user-name = 'andreas'
D [14/Mar/2005:20:15:32 +0100] print_job: requesting-user-name = 'andreas'
D [14/Mar/2005:20:15:32 +0100] Adding default job-sheets values "none,none"...
I [14/Mar/2005:20:15:32 +0100] Adding start banner page "none" to job 3.
d [14/Mar/2005:20:15:32 +0100] copy_banner(0x2a96a58c90[7], 0x79a750[3], none)
d [14/Mar/2005:20:15:32 +0100] add_file(con=0x2a96a58c90[7], job=3, filetype=application/postscript, compression=0)
I [14/Mar/2005:20:15:32 +0100] Adding end banner page "none" to job 3.
d [14/Mar/2005:20:15:32 +0100] copy_banner(0x2a96a58c90[7], 0x79a750[3], none)
I [14/Mar/2005:20:15:32 +0100] Job 3 queued on 'epl6200l' by 'andreas'.
D [14/Mar/2005:20:15:32 +0100] Job 3 hold_until = 0
d [14/Mar/2005:20:15:32 +0100] SaveJob: Closing file 8...
D [14/Mar/2005:20:15:32 +0100] StartJob(3, 0x552dc0)
D [14/Mar/2005:20:15:32 +0100] StartJob() id = 3, file = 0/1
D [14/Mar/2005:20:15:32 +0100] job-sheets=none,none
D [14/Mar/2005:20:15:32 +0100] banner_page = 0
D [14/Mar/2005:20:15:32 +0100] StartJob: argv = "epl6200l","3","andreas","page_log","1","multiple-document-handling=separate-documents-collated-copies orientation-requested=3","/var/spool/cups/d00003-001"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[0]="PATH=/usr/lib64/cups/filter:/bin:/usr/bin"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[2]="USER=root"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[3]="CHARSET=utf-8"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[4]="LANG=de"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[5]="PPD=/etc/cups/ppd/epl6200l.ppd"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[11]="PRINTER=epl6200l"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[14]="CUPS_SERVER=localhost"
D [14/Mar/2005:20:15:32 +0100] StartJob: envp[15]="IPP_PORT=631"
d [14/Mar/2005:20:15:32 +0100] StartJob: Allocating status buffer...
D [14/Mar/2005:20:15:32 +0100] StartJob: statusfds = [ 8 9 ]
D [14/Mar/2005:20:15:32 +0100] StartJob: filterfds[1] = [ 10 -1 ]
D [14/Mar/2005:20:15:32 +0100] StartJob: filter = "/usr/lib64/cups/filter/pstops"
D [14/Mar/2005:20:15:32 +0100] StartJob: filterfds[0] = [ 11 12 ]
D [14/Mar/2005:20:15:32 +0100] start_process("/usr/lib64/cups/filter/pstops", 0x7fbffed8a0, 0x7fbffeca80, 10, 12, 9)
I [14/Mar/2005:20:15:32 +0100] Started filter /usr/lib64/cups/filter/pstops (PID 9007) for job 3.
D [14/Mar/2005:20:15:32 +0100] StartJob: filter = "/usr/lib64/cups/filter/foomatic-rip"
D [14/Mar/2005:20:15:32 +0100] StartJob: filterfds[1] = [ 10 13 ]
D [14/Mar/2005:20:15:32 +0100] start_process("/usr/lib64/cups/filter/foomatic-rip", 0x7fbffed8a0, 0x7fbffeca80, 11, 13, 9)
I [14/Mar/2005:20:15:32 +0100] Started filter /usr/lib64/cups/filter/foomatic-rip (PID 9008) for job 3.
D [14/Mar/2005:20:15:32 +0100] StartJob: backend = "/usr/lib64/cups/backend/parallel"
D [14/Mar/2005:20:15:32 +0100] StartJob: filterfds[0] = [ -1 11 ]
D [14/Mar/2005:20:15:32 +0100] start_process("/usr/lib64/cups/backend/parallel", 0x7fbffed8a0, 0x7fbffeca80, 10, 11, 9)
I [14/Mar/2005:20:15:32 +0100] Started backend /usr/lib64/cups/backend/parallel (PID 9009) for job 3.
d [14/Mar/2005:20:15:32 +0100] StartJob: Adding fd 8 to InputSet...
d [14/Mar/2005:20:15:32 +0100] add_job_state_reasons(0x2a96a58c90[7], 3)
D [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest: 7 status_code=0
d [14/Mar/2005:20:15:32 +0100] ProcessIPPRequest: Adding fd 7 to OutputSet...
d [14/Mar/2005:20:15:32 +0100] WriteClient: Removing fd 7 from OutputSet...
d [14/Mar/2005:20:15:32 +0100] ReadClient: 7, used=0, file=-1
d [14/Mar/2005:20:15:32 +0100] ReadClient: httpGets returned EOF...
D [14/Mar/2005:20:15:32 +0100] CloseClient: 7
d [14/Mar/2005:20:15:32 +0100] CloseClient: Removing fd 7 from InputSet and OutputSet...
D [14/Mar/2005:20:15:32 +0100] [Job 3] Page = 612x792; 12,12 to 600,780
D [14/Mar/2005:20:15:32 +0100] [Job 3] slowcollate=0, slowduplex=0, sloworder=0
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BoundingBox: 0 0 612 792
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Creator: Qt 3.3.4
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Title: page_log
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%CreationDate: Mo M� 14 20:15:32 2005
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Orientation: Portrait
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Pages: 1
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%DocumentFonts: Verdana Courier
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndComments
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BeginProlog
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndProlog
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BeginSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] foomatic-rip version $Revision: 3.48 $ running...
D [14/Mar/2005:20:15:32 +0100] [Job 3] Parsing PPD file ...
D [14/Mar/2005:20:15:32 +0100] [Job 3] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option ColorSpace
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option Resolution
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option PageSize
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option PageRegion
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option ImageableArea
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option PaperDimension
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option TonerSave
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option Dpi
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option FlowControl
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option Ritech
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option Density
D [14/Mar/2005:20:15:32 +0100] [Job 3] Added option Font
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] Parameter Summary
D [14/Mar/2005:20:15:32 +0100] [Job 3] -----------------
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] Spooler: cups
D [14/Mar/2005:20:15:32 +0100] [Job 3] Printer: epl6200l
D [14/Mar/2005:20:15:32 +0100] [Job 3] PPD file: /etc/cups/ppd/epl6200l.ppd
D [14/Mar/2005:20:15:32 +0100] [Job 3] Printer model: Epson EPL-6200L Foomatic/epl6200l (recommended)
D [14/Mar/2005:20:15:32 +0100] [Job 3] Job title: page_log
D [14/Mar/2005:20:15:32 +0100] [Job 3] File(s) to be printed:
D [14/Mar/2005:20:15:32 +0100] [Job 3] <STDIN>
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] Pondering option 'multiple-document-handling=separate-documents-collated-copies'
D [14/Mar/2005:20:15:32 +0100] [Job 3] Unknown option multiple-document-handling=separate-documents-collated-copies.
D [14/Mar/2005:20:15:32 +0100] [Job 3] Pondering option 'orientation-requested=3'
D [14/Mar/2005:20:15:32 +0100] [Job 3] Unknown option orientation-requested=3.
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] ================================================
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] File: <STDIN>
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] ================================================
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] Reading PostScript input ...
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%CreationDate: Tue Sep 17 16:16:38 1991
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%VMusage: 57844 76768
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %% Copyright International Business Machines,Corp. 1991
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %% IBM Courier is a Trademark of the IBM Corporation.
D [14/Mar/2005:20:15:32 +0100] [Job 3] --> This document is DSC-conforming!
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] -----------
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginProlog
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%EndProlog
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] -----------
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] Inserting PostScript code for CUPS' page accounting
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginFeature: *PageSize Letter
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: PageSize=Letter --> Option will be set by PostScript interpreter
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginFeature: *FlowControl Off
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: FlowControl=Off --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %% FoomaticRIPOptionSetting: FlowControl=Off
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: FlowControl=Off --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginFeature: *Dpi 600x600dpi
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: Dpi=600x600dpi --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %% FoomaticRIPOptionSetting: Dpi=600x600dpi
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: Dpi=600x600dpi --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginFeature: *Density 3
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: Density=3 --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %% FoomaticRIPOptionSetting: Density=3
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: Density=3 --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginFeature: *Ritech On
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: Ritech=On --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %% FoomaticRIPOptionSetting: Ritech=On
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: Ritech=On --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginFeature: *TonerSave Off
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: TonerSave=Off --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %% FoomaticRIPOptionSetting: TonerSave=Off
D [14/Mar/2005:20:15:32 +0100] [Job 3] Option: TonerSave=Off --> Setting option
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %% Font Page 00
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BeginFont: Courier
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%FontName: Courier-Uni
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Creator: Composite font created by Qt
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndFont
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BeginFont: Verdana
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Copyright: Typeface and data 1996 Microsoft Corporation. All Rights Reserved
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Creator: Converted from TrueType by Qt
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %% Font Page 00
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BeginFont: Verdana
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%FontName: Verdana-Uni
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Creator: Composite font created by Qt
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndFont
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndFont
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Page: 1 1
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Page: 1 1
D [14/Mar/2005:20:15:32 +0100] [Job 3] pw = 588.0, pl = 768.0
D [14/Mar/2005:20:15:32 +0100] [Job 3] PageLeft = 12.0, PageRight = 600.0
D [14/Mar/2005:20:15:32 +0100] [Job 3] PageTop = 780.0, PageBottom = 12.0
D [14/Mar/2005:20:15:32 +0100] [Job 3] PageWidth = 612.0, PageLength = 792.0
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%BeginPageSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%EndPageSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] 0 %%Trailer
D [14/Mar/2005:20:15:32 +0100] [Job 3] Saw Trailer!
D [14/Mar/2005:20:15:32 +0100] [Job 3] Saw EOF!
d [14/Mar/2005:20:15:32 +0100] PID 9007 exited with no errors.
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%EndSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] -----------
D [14/Mar/2005:20:15:32 +0100] [Job 3] New page: 1 1
D [14/Mar/2005:20:15:32 +0100] [Job 3] Inserting option code into "PageSetup" section.
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%BeginPageSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] Found: %%EndPageSetup
D [14/Mar/2005:20:15:32 +0100] [Job 3] End of page header
D [14/Mar/2005:20:15:32 +0100] [Job 3] Flushing FIFO.
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] Starting renderer
D [14/Mar/2005:20:15:32 +0100] [Job 3] JCL: <job data>
D [14/Mar/2005:20:15:32 +0100] [Job 3]
D [14/Mar/2005:20:15:32 +0100] [Job 3] renderer PID kid4=9012
D [14/Mar/2005:20:15:32 +0100] [Job 3] renderer command: gs -q -dBATCH -dSAFER -dNOPAUSE -sProcessColorModel=DeviceGray -dBitsPerSample=1 -sDEVICE=ijs -sIjsServer=ijs_server_epsonepl -dIjsUseOutputFD -sDeviceManufacturer=Epson -sDeviceModel=EPL6200L -sIjsParams="EplFlowControl=off,EplDpi=600,EplDensity=3,EplRitech=on,EplTonerSave=off," -sOutputFile=- -
D [14/Mar/2005:20:15:32 +0100] [Job 3] foomatic-gswrapper: gs '-dBATCH' '-dSAFER' '-dNOPAUSE' '-sProcessColorModel=DeviceGray' '-dBitsPerSample=1' '-sDEVICE=ijs' '-sIjsServer=ijs_server_epsonepl' '-dIjsUseOutputFD' '-sDeviceManufacturer=Epson' '-sDeviceModel=EPL6200L' '-sIjsParams=EplFlowControl=off,EplDpi=600,EplDensity=3,EplRitech=on,EplTonerSave=off,' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
d [14/Mar/2005:20:15:33 +0100] AcceptClient(lis=0x544700) 0 NumClients = 1
D [14/Mar/2005:20:15:33 +0100] AcceptClient: 7 from localhost:631.
d [14/Mar/2005:20:15:33 +0100] AcceptClient: Adding fd 7 to InputSet...
d [14/Mar/2005:20:15:33 +0100] ReadClient: 7, used=0, file=-1
D [14/Mar/2005:20:15:33 +0100] ReadClient: 7 POST /printers/ HTTP/1.1
d [14/Mar/2005:20:15:33 +0100] decode_auth(0x2a96a58c90): Authorization string = ""
d [14/Mar/2005:20:15:33 +0100] decode_auth: 7 username=""
d [14/Mar/2005:20:15:33 +0100] IsAuthorized: con->uri = "/printers/"
d [14/Mar/2005:20:15:33 +0100] FindBest: uri = "/printers/"...
d [14/Mar/2005:20:15:33 +0100] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [14/Mar/2005:20:15:33 +0100] FindBest: Location / Limit 7f
d [14/Mar/2005:20:15:33 +0100] FindBest: Location /admin Limit 7f
d [14/Mar/2005:20:15:33 +0100]
Antworten