Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

SuSE Linux 9.2 und Gigaset USB Adapter 11

Alles rund um das Internet, Internet-Anwendungen (E-Mail, Surfen, Cloud usw.) und das Einrichten von Netzwerken einschl. VPN unter Linux

Moderator: Moderatoren

Antworten
BLACKout
Newbie
Newbie
Beiträge: 1
Registriert: 2. Mär 2005, 15:54

SuSE Linux 9.2 und Gigaset USB Adapter 11

Beitrag von BLACKout »

hallo,

ich komm einfach nicht weiter mit dem teil...

Ich hab die Wireless-tools und die atmel firmware installiert...

Aber ich kann das teil nicht konfigurieren....mithilfe der alten threads komm ich nicht wirklich weiter...

Kann mir jemand helfen??

PS.: sorry, bin noch linuxanfänger

Danke
Benutzeravatar
seemeister
Newbie
Newbie
Beiträge: 11
Registriert: 12. Nov 2003, 16:09
Wohnort: Wien
Kontaktdaten:

Beitrag von seemeister »

Ich hänge mich gleich an - habe es genau so gemacht wie in den beiden anderen threads beschriben. atmel firmware installiert - Gigaset USB Adapter 11 aus und angesteckt - keine Reaktion.

Im Suseplugger habe ich unter unbekannten Geräten "Askey Computer..." und "Atmel 4 Port Hub".
Von selber passiert gar nichts und wenn ich im Suseplugger auf "einfügen" klicke fragt er mich nach dem pw und behauptet er hat die treiber geladen und das Gerät ist betriebsbereit.

Unter yast -> netzwerkgeräte -> netzwerkkarten ist kein wlan gerät aufgelistet. :(

Ich habe im Rechner noch eine normale Netzwerkkarte (fürs Internet DHCP) die funktioniert und 2 Weitere Karten (Onboard-LAN und eine weitere alte Karte) habe ich nicht konfiguriert und können vom System ignoriert werden.
lo no wireless extensions.

eth0 no wireless extensions.

eth1 no wireless extensions.

eth2 no wireless extensions.

sit0 no wireless extensions.

-----------

Bus 004 Device 004: ID 1690:0701 Askey Computer Corp. [hex]
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 007: ID 03f0:7104 Hewlett-Packard
Bus 003 Device 006: ID 055f:0001 Mustek Systems, Inc. ScanExpress 1200 CU
Bus 003 Device 005: ID 046d:c01a Logitech, Inc.
Bus 003 Device 004: ID 03eb:3301 Atmel Corp. 4-port Hub
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter
Bus 001 Device 001: ID 0000:0000

-----------

Linux version 2.6.8-24.11-smp (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 SMP Fri Jan 14 13:01:26 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
128MB vmalloc/ioremap area available.
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f64b0
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 AWARD ) @ 0x000f7df0
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6ec0
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda11 vga=0x31a selinux=0 resume=/dev/hda10 desktop elevator=as splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3200.606 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032680k/1048512k available (2338k kernel code, 15168k reserved, 825k data, 252k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 6356.99 BogoMIPS (lpj=3178496)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
per-CPU timeslice cutoff: 1462.85 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
Total of 2 processors activated (12746.75 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1192k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb810, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.1 -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:02.3 -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:03.1 -> GSI 21 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1110383906.4294965996:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 10240k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:e100
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47601 bytes,<6>...found (1280x1024, 24984 bytes, v3).
Console: switching to colour frame buffer device 158x57
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 177
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST3160021A, ATA DISK drive
hdb: IDE-DVD ROM 16x, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Hewlett-Packard DVD Writer 300, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda10
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2K
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda11: found reiserfs format "3.6" with standard journal
ReiserFS: hda11: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda11: journal params: device hda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda11: checking transaction log (hda11)
ReiserFS: hda11: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 252k freed
Adding 1044184k swap on /dev/hda10. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
NTFS driver 2.1.17 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
subfs 0.9
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 225
eth0: Unknown PHY transceiver found at address 0.
eth0: VIA 6103 PHY transceiver found at address 1.
eth0: Unknown PHY transceiver found at address 2.
eth0: Unknown PHY transceiver found at address 3.
eth0: Unknown PHY transceiver found at address 4.
eth0: Unknown PHY transceiver found at address 5.
eth0: Unknown PHY transceiver found at address 6.
eth0: Unknown PHY transceiver found at address 7.
eth0: Unknown PHY transceiver found at address 8.
eth0: Unknown PHY transceiver found at address 9.
eth0: Unknown PHY transceiver found at address 10.
eth0: Unknown PHY transceiver found at address 11.
eth0: Unknown PHY transceiver found at address 12.
eth0: Unknown PHY transceiver found at address 13.
eth0: Unknown PHY transceiver found at address 14.
eth0: Unknown PHY transceiver found at address 15.
ieee1394: Initialized config rom entry `ip1394'
eth0: Unknown PHY transceiver found at address 16.
eth0: Unknown PHY transceiver found at address 17.
eth0: Unknown PHY transceiver found at address 18.
eth0: Unknown PHY transceiver found at address 19.
eth0: Unknown PHY transceiver found at address 20.
eth0: Unknown PHY transceiver found at address 21.
eth0: Unknown PHY transceiver found at address 22.
eth0: Unknown PHY transceiver found at address 23.
eth0: Unknown PHY transceiver found at address 24.
eth0: Unknown PHY transceiver found at address 25.
eth0: Unknown PHY transceiver found at address 26.
eth0: Unknown PHY transceiver found at address 27.
eth0: Unknown PHY transceiver found at address 28.
eth0: Unknown PHY transceiver found at address 29.
eth0: Unknown PHY transceiver found at address 30.
eth0: Unknown PHY transceiver found at address 31.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 225, 00:0c:76:87:dc:ce.
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:02.3 -> GSI 17 (level, low) -> IRQ 169
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[169] MMIO=[e3000000-e30007ff] Max Packet=[2048]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 128M @ 0xd0000000
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 217
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: irq 217, pci mem f972e000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.11-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 193, pci mem f973c000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24.11-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1 -> GSI 21 (level, low) -> IRQ 201
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: irq 201, pci mem f973e000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.8-24.11-smp ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb 1-4: new high speed USB device using address 3
usb 1-4: Product: USB TO IDE
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 209
ohci_hcd 0000:00:03.2: OHCI Host Controller
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc0049e8ed]
ohci_hcd 0000:00:03.2: irq 209, pci mem f9762000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.8-24.11-smp ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using address 2
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 185
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:07.0: 3Com PCI 3c900 Boomerang 10baseT at 0xe000. Vers LK1.1.19
eth1: Dropping NETIF_F_SG since no checksum feature.
CAPI Subsystem Rev 1.1.2.8
capifs: Rev 1.1.2.3
usb 3-1: control timeout on ep0out
usb 3-1: device not accepting address 2, error -110
usb 3-1: new full speed USB device using address 3
capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
CSLIP: code copyright 1989 Regents of the University of California
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
capidrv: Rev 1.1.2.2: loaded
Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 90069840 512-byte hdwr sectors (46116 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
sda:hdb: ATAPI 40X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 <hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache
sda5 sda6 > sda3
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
module fcpci unsupported by SUSE/Novell, tainting kernel.
fcpci: module license 'Proprietary' taints kernel.
fcpci: AVM FRITZ!Card PCI driver, revision 0.6.0
fcpci: (fcpci built on Jan 14 2005 at 19:35:50)
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 169
fcpci: AVM FRITZ!Card PCI found: port 0xdc00, irq 169
fcpci: Loading...
fcpci: Driver 'fcpci' attached to stack. (152)
fcpci: Stack version 3.11-02
kcapi: Controller 1: fcpci-dc00-169 attached
kcapi: card 1 "fcpci-dc00-169" ready.
fcpci: Loaded.
capidrv: controller 1 up
capidrv-1: now up (2 B channels)
capidrv-1: D2 trace enabled
st: Version 20040403, fixed bufsize 32768, s/g segs 256
usb 3-1: control timeout on ep0out
evdev_connect: evdev cde1a680 handle cde1a69c name event0
evdev_connect: evdev cde1a580 handle cde1a59c name event1
usb 3-1: device not accepting address 3, error -110
usb 3-2: new full speed USB device using address 4
usb 3-2: Product: Standard USB Hub
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 3-2.1: new low speed USB device using address 5
usb 3-2.1: Product: USB-PS/2 Optical Mouse
usb 3-2.1: Manufacturer: Logitech
usb 3-2.3: new full speed USB device using address 6
usb 3-2.4: new full speed USB device using address 7
usb 3-2.4: Product: deskjet 3420
usb 3-2.4: Manufacturer: hp
usb 3-2.4: SerialNumber: MY26M3Y0DF1J
NET: Registered protocol family 17
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 225
eth2: RealTek RTL-8029 found at 0xe400, IRQ 225, 00:4F:49:0A:62:03.
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7104
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
evdev_connect: evdev cde19280 handle cde1929c name event2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 185
intel8x0_measure_ac97_clock: measured 50000 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c4fc0(lo)
IPv6 over IPv4 tunneling driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: unregistered pardevice
lp0: using parport0 (polling).
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Thermal Zone [THRM] (46 C)
powernow: This module only works with AMD K7 CPUs
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Disabled Privacy Extensions on device f7e81400(sit0)
eth1: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
lp0: using parport0 (polling).
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ohci_hcd 0000:00:03.2: wakeup
usb 4-2: new full speed USB device using address 2
usb 4-2: USB disconnect, address 2
ohci_hcd 0000:00:03.0: wakeup
usb 2-1: new full speed USB device using address 2
usb 2-1: USB disconnect, address 2
ohci_hcd 0000:00:03.2: wakeup
usb 4-2: new full speed USB device using address 3
usb 4-2: USB disconnect, address 3
ohci_hcd 0000:00:03.2: wakeup
usb 4-2: new full speed USB device using address 4
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
eth0: Media Link Off
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
eth0: no IPv6 routers present
APIC error on CPU0: 00(60)




Ich bin schon am Verzweifeln, weil mit dem 9.2 das wlan angeblich super leicht zum einrichten sein soll.

Bin für jede Hilfe dankbar, damit ich WIN endlich komplett loswerden kann.

Seemeister
schachjogi
Member
Member
Beiträge: 83
Registriert: 22. Mai 2004, 00:13

Beitrag von schachjogi »

Hi,
unter Yast sollte zumindest ein nicht konfiguriertes Gerät bei Netzwerkkarten auftauchen. Wenn dem so ist, mal dieses Gerät richtig konfigurieren, also ESSID eingeben, Wireless-Mode Managed; Verschlüsselung würde ich erst mal weglassen.
Gruß
Schachjogi
Benutzeravatar
seemeister
Newbie
Newbie
Beiträge: 11
Registriert: 12. Nov 2003, 16:09
Wohnort: Wien
Kontaktdaten:

Beitrag von seemeister »

Nein, nichts - bei den Netzwerkkarten ist kein noch nicht konfiguriertes Gerät. :(
Es ist wirklich zum Heulen - 1 Woche 9.2 und ich bekomme nicht mal das besch*** WLAN hin. :evil:
spirit05
Newbie
Newbie
Beiträge: 1
Registriert: 21. Mär 2005, 10:56

ich schliesse mich meinem Vorredner an...

Beitrag von spirit05 »

Hallo Leute
um es kurz zu machen ich habe die gleichen probs wie seemeister & BLACKout

ich habe einen P3 550MHz mit Realtek PCI Netzwerkkarte ...

Während der Installation von Suse 9.2 Prof hatte ich meinen WLAN USB Adapter 11 angeschlossen - deshalb auch keine "Installation und erkennung im herkömmlichen Sinne"

Das Gerät wird wie bei seemeister als Askey Comuter Corp [hex] Unclassified device im Suse Plugger unter Unbekannt angezeigt (Auswerfen / Einfügen bringen mich an der Stelle nicht weiter)

Im Yast habe ich das gleiche Prob
es wird kein Gerät (unter Andere) angezeigt das ich konfigurieren könnte
Meine PCI Ethernet Karte habe ich erstmal deaktiviert

wenn ich jetzt manuell eine WLAN USB Verbindung herstellen möchte kann man zwar alles einstellen (ESSID, DHCP ...) aber ohne ergebnis

Soweit ich mich belesen habe bringt es eh nichts im yast rumzuklickern wenn nicht mal iwconfig ein ergebnis bringt

ansonsten habe ich folgende module installiert
kdenetwork 3 - wireless; km_wlan; ndiswrapper; wireless tools;
atmel firmware
wobei die Version auf der Install CD (v 1.0-2) für i586 Architektur ausgelegt ist (laut install info ...) ich habe die v 1.1-1 für i386 installiert

von wegen neu anstöpseln oder ähnlichem habe ich alles probiert

dann habe ich mir dem ndiswrapper versucht die win treiber zu übernehmen
für den WLAN Adapter gibt es 4 verschiedene Treiber (wobei mein XP den nv5a8as.inf verwendet) ich habe alle 4 probiert ohne erfolg
als status für ndiswrapper -l bekomme ich : device not plugged in (oder ähnlich)

nun ja jetzt geht mir langsam mein latein aus
- wie kann man den unclassified Askey Device konfigurieren
- http://www.linux-wlan.com/index.html sollte man das probieren ??? denn auf der seite wird der gigaset usb 11 als supportet aufgeführt nur hab ich ein wenig respekt irgendwie den kernel neu zu compilieren wenn mir da jemand eine schritt für schritt anleitung (speziell zu diesem Thema) geben könnte wäre das super
- oder wäre es eventuell sogar sinnvoll linux neu zu installieren (ohne USB adapter) und dann irgendwie zu hoffen das alles auf anhieb klappt :lol:

nun ja ich bin für alles aufgeschlossen

mfG Spirit
schachjogi
Member
Member
Beiträge: 83
Registriert: 22. Mai 2004, 00:13

Beitrag von schachjogi »

Hi,
es scheint so zu sein, daß Siemens mittlerweile einen anderen Chipsatz verwendet. Ich habe einen älteren Gigaset USB 11 problemlos am laufen. Mein Teil hat einen Atmel-Chip und läuft mit verschiedenen Linuxen tadellos.
Gruß
Schachjogi
Antworten