Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

was stimmt an der vsftpd Konfiguration nicht??

Alles rund um das Internet, Internet-Anwendungen (E-Mail, Surfen, Cloud usw.) und das Einrichten von Netzwerken einschl. VPN unter Linux

Moderator: Moderatoren

Antworten
Benutzeravatar
Navigato
Newbie
Newbie
Beiträge: 24
Registriert: 19. Dez 2004, 13:52
Wohnort: Stgt

was stimmt an der vsftpd Konfiguration nicht??

Beitrag von Navigato »

Hi,

ich habe ein Problem mit meiner vsftpd Konfiguration. Der Dienst läuft aber ich kann mich nicht connecten. Der TotalCommander bleibt beim LIST befehl hängen als ob da keine Antwort kommen würde. :?:

Danke
Gruß
Navigato

Code: Alles auswählen

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# If you do not change anything here you will have a minimum setup for an
# anonymus FTP server.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.

# General Settings
#
# Uncomment this to enable any form of FTP write command.
#
write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
#
dirmessage_enable=YES
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#
#nopriv_user=ftpsecure
#
# You may fully customise the login banner string:
#
ftpd_banner="Welcome to FOOBAR FTP service."
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#
#ls_recurse_enable=YES
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#
#deny_email_enable=YES
#
# (default follows)
#
#banned_email_file=/etc/vsftpd.banned_emails
#
# If  enabled,  all  user  and  group  information in
# directory listings will be displayed as "ftp".
#
#hide_ids=YES

# Local FTP user Settings
# 
# Uncomment this to allow local users to log in.
#
local_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#
#local_umask=022
#
# Uncomment to put local users in a chroot() jail in their home directory
# after login.
#
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#
chroot_list_enable=YES
#
# (default follows)
#
chroot_list_file=/etc/vsftpd.chroot_list
#
# The maximum data transfer rate permitted, in bytes per second, for
# local authenticated users. The default is 0 (unlimited).
#
local_max_rate=0

# Anonymus FTP user Settings
#
# Allow anonymous FTP?
#
anonymous_enable=NO
#
# Anonymous users will only be allowed to download files which are
# world readable.
#
anon_world_readable_only=NO
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#
anon_upload_enable=NO
#
# Default umask for anonymus users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#
#anon_umask=022
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#
anon_mkdir_write_enable=NO
#
# Uncomment this to enable anonymus FTP users to perform other write operations
# like deletion and renaming.
#
anon_other_write_enable=NO
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#
#chown_uploads=YES
#chown_username=whoever
#
# The maximum data transfer rate permitted, in bytes per second, for anonymous
# authenticated users. The default is 0 (unlimited).
#
#anon_max_rate=7200

# Log Settings
#
# Log to the syslog daemon instead of using an logfile.
#
syslog_enable=YES
#
# Uncomment this to log all FTP requests and responses.
#
log_ftp_protocol=YES
#
# Activate logging of uploads/downloads.
#
xferlog_enable=YES
#
# You may override where the log file goes if you like. The default is shown
# below.
#
vsftpd_log_file=/var/log/vsftpd.log
# 
# If you want, you can have your log file in standard ftpd xferlog format.
# Note: This disables the normal logging unless you enable dual_log_enable below. 
#
#xferlog_std_format=YES
#
# You may override where the log file goes if you like. The default is shown
# below.
#
#xferlog_file=/var/log/xferlog
#
# Enable this to have booth logfiles. Standard xferlog and vsftpd's own style log.
#
#dual_log_enable=YES
#
# Uncomment this to enable session status information in the system process listing.
#
#setproctitle_enable=YES

# Transfer Settings
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
#
connect_from_port_20=YES
#
# You may change the default value for timing out an idle session.
#
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#
#data_connection_timeout=120
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#
ascii_upload_enable=YES
ascii_download_enable=YES
#
# Set to NO if you want to disallow the  PASV  method of obtaining a data
# connection.
#
#pasv_enable=NO

# PAM setting. Do NOT change this unless you know what you do!
#
pam_service_name=vsftpd

# Set listen=YES if you want vsftpd to run standalone
#
listen=YES
Benutzeravatar
rkone22
Newbie
Newbie
Beiträge: 8
Registriert: 3. Feb 2005, 13:17
Wohnort: Edling

anonymous

Beitrag von rkone22 »

Hi,
versuchs mal mit anonymous_enable=yes.
Gruß
Ralf
Benutzeravatar
mcdaniels
Member
Member
Beiträge: 90
Registriert: 14. Feb 2004, 09:52
Kontaktdaten:

Beitrag von mcdaniels »

Hi!
Das kommt aber dann drauf an, wie er den Login auf dem FTP Server handhaben will.

Wenn er anonymen Zugriff erlauben will dann ja, ansonsten sollte man sich einen FTP USER einrichten und die vsftpd.conf und die Datei userlist_enable entsprechend anpassen

Zusätzliche Parameter in der vsftpd.conf
userlist_deny=NO
userlist_enable=YES

Die Datei vsftpd.user_list muss dann den Usernamen des für FTP angelegten User haben.

Man sollte dem FTP User auch noch eine nicht vorhandene Shell zuweisen, somit kann er sich nicht im System einloggen (zur Sicherheit) ;)
Benutzeravatar
rkone22
Newbie
Newbie
Beiträge: 8
Registriert: 3. Feb 2005, 13:17
Wohnort: Edling

vsftpd.conf

Beitrag von rkone22 »

Hi mcdaniels,

klar!
Aber für die erste Fehleranalyse wär es mal ein Versuch zu testen, ob es überhaupt eine Verbindung mit anonymous gibt.
Die Lösung mit der Userlist fand ich am Anfang etwas umständlich.
Auf einem meiner Systeme habe ich daher local_user enabled.
Ich vermute das dieser TotalCommander den LIST mit anonymous versucht.

Gruß
Ralf
:D
Polli
Newbie
Newbie
Beiträge: 4
Registriert: 20. Jul 2004, 10:19

vsftp

Beitrag von Polli »

Kann es vielleicht sein, dass deine Firewall aktiv ist?
Antworten