nach einem Update von SuSE 9.1 auf 9.2 stehe ich wieder einmal vor dem leidiglichen und selben Thema "Scanner-Einbindung".
- Plustek 12000T
- sane-backends-1.0.15 (TAR-Version von sane.org)
Entsprechend der früheren Diskussionen und dem Posting hier http://www.linux-club.de/viewtopic.php? ... af6706fbc3, bin ich wie folgt vorgegangen:
- Nachinstallieren von libieee1284-0.2.8.tar.bz2
- Deinstallieren der sane-Pakete unter SuSE und löschen der entsprechenden Verzeichnisse.
- Installieren von sane-backends-1.0.15
Code: Alles auswählen
./configure --prefix=/usr --sysconfdir=/etc --mandir=/usr/share/man --infodir=/usr/share/infoCode: Alles auswählen
-> Variables used for compilation/linking:
CPPFLAGS=" -DPATH_SANE_CONFIG_DIR=$(configdir) -DPATH_SANE_DATA_DIR=$(datadir) -DV_MAJOR=1 -DV_MINOR=0 -I/usr/include/gphoto2 "
CFLAGS="-g -O2 -W -Wall"
LDFLAGS=" "
LIBS="-lusb -lnsl -lm -ljpeg -lieee1284 -lgphoto2 -lgphoto2_port -lm -lresmgr"
-> Installation directories:
Configuration: /etc
Libraries: /usr/lib
Binaries: /usr/bin and /usr/sbin
Manpages: /usr/share/man
Documentation:
-> Network parameters:
Build saned: yes
IPv6 support: yes
-> The following backends will be built:
abaton agfafocus apple artec as6e avision bh canon canon630u coolscan coolscan2 dc25 dmc epson fujitsu gt68xx hpleo matsushita microtek microtek2 mustek mustek_usb nec pie plustek plustek_pp ricoh s9036 sceptre sharp sp15c st400 tamarack test teco1 teco2 teco3 umax umax_pp umax1220u artec_eplus48u ma1509 ibm hp5400 u12 snapscan niash dc210 dc240 canon_pp hpsj5s mustek_pp gphoto2 qcam v4l net sm3600
****************************************************************
* Please be sure to read file PROBLEMS in this directory *
* BEFORE running any of the SANE applications. Some devices *
* may be damaged by inproper operation, so please do heed this *
* advice. *
****************************************************************
Code: Alles auswählen
export SANE_DEBUG_PLUSTEK_PP=20 ; export SANE_DEBUG_SANEI_PP=20 ; scanimage -L
Code: Alles auswählen
[sanei_debug] Setting debug level of plustek_pp to 20.
[sanei_debug] Setting debug level of sanei_pp to 20.
[sanei_pp] pp_init: called for the first time
[sanei_pp] pp_init: initializing libieee1284
[sanei_pp] pp_init: 1 ports reported by IEEE 1284 library
[sanei_pp] pp_init: port 0 is `parport0`
[sanei_pp] pp_init: initialized successfully
[sanei_pp] pp_calibrate_delay: Delay expected: 1000, real 1986, pp_thresh=2
[plustek_pp] PlustekPP backend V0.43-5, part of sane-backends 1.0.15
[plustek_pp] ># Plustek-PP SANE Backend configuration file<
[plustek_pp] ># For use with Plustek parallel-port scanners<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># user either [direct] or [kernel] to access the scanner<
[plustek_pp] ># when using [kernel], device specifies the device-node, which is created<
[plustek_pp] ># by the kernel-module loader (applies only to Linux)<
[plustek_pp] ># when using [direct], device is used to set the parallel-port base address<
[plustek_pp] ># or a device-name suitable for libieee1284, i.e. parport0<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] >device 0x378<
[plustek_pp] Decoding device name >0x378<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># leave the default values as specified in /etc/modules.conf<
[plustek_pp] >#<
[plustek_pp] >option warmup -1<
[plustek_pp] Decoding option >warmup<
[plustek_pp] >option lOffOnEnd -1<
[plustek_pp] Decoding option >lOffOnEnd<
[plustek_pp] >option lampOff -1<
[plustek_pp] Decoding option >lampOff<
[plustek_pp] ><
[plustek_pp] ># model override switch, mostly for cosmetic changes, if the autodetection<
[plustek_pp] ># does not work or could not work correctly<
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via libieee1284<
[plustek_pp] >#<
[plustek_pp] >[direct]<
[plustek_pp] attach (0x378, 0xbfff3e20, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >0x378<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[sanei_pp] sanei_pp_open: called for device '0x378'
[sanei_pp] pp_open: trying to attach dev `0x378`
[sanei_pp] pp_open: looking up port in list
[sanei_pp] pp_open: checking >parport0<
[sanei_pp] pp_open: `0x378` is not a valid device name
[sanei_pp] sanei_pp_open: connection failed
[plustek_pp] open: PtDrvInit failed: 4
[plustek_pp] open failed: -1
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] ><
[plustek_pp] >#option warmup -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff -1<
[plustek_pp] attach (parport0, 0xbfff3e20, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >parport0<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[sanei_pp] sanei_pp_open: called for device 'parport0'
[sanei_pp] pp_open: trying to attach dev `parport0`
[sanei_pp] pp_open: looking up port in list
[sanei_pp] pp_open: checking >parport0<
[sanei_pp] pp_open: port is in list at port[0]
[sanei_pp] pp_open: opening device
[sanei_pp] Supported Modes: SPP PS/2
[sanei_pp] pp_open: device `parport0` opened...
[sanei_pp] sanei_pp_open: connected to device using fd 0
[plustek_pp] ptdrvInit(0)
[plustek_pp] Init settings done
[plustek_pp] ScanData = 0x0806d4f8
[plustek_pp] Assigning port handle 0
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[sanei_pp] sanei_pp_claim: fd = 0
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-Autodetection
[plustek_pp] ************ DETECTP48xx ************
[plustek_pp] ModelSet4800()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4800() done.
[plustek_pp] P48xxInitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] MotorInitialize()
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x80 and status=0x50, port=0x0
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Can't find your model, asic = 0x5a
[plustek_pp] detectScannerConnection() returns -9031.
[plustek_pp] ************* ASIC9800x *************
[plustek_pp] ResetPort()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] ASIC = 0x81
[plustek_pp] ************* ASIC98001 *************
[plustek_pp] ModelSet9636()
[plustek_pp] ModelSet9360()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9630() done.
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9636() done.
[plustek_pp] P9636InitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] MotorInitialize()
[plustek_pp] 0x81
[plustek_pp] CCID = 0x00
[plustek_pp] P9636InitAsic() done.
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x80 and status=0x10, port=0x0
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Putting Scanner (ASIC 98001) into Idle-Mode
[plustek_pp] detectScannerConnection() returns 0.
[plustek_pp] p9636InitP98001(0)
[plustek_pp] bData = 0x0000, PCB-ID = 0x00
[plustek_pp] CCD-ID = 0x00 = _CCD_3797
[plustek_pp] bSetScanModeFlag = 0
[plustek_pp] *** setupBuffers ***
[plustek_pp] Driverbuf(147360 bytes) needed !
[plustek_pp] pColorRunTab = 0x4038c534 - 0x4038bfa8
[plustek_pp] Adjust for 98001 ASIC
[plustek_pp] sb2 = 0x40368008, sb1 = 0x40372be8, Color = 0x40382db8
[plustek_pp] Pro = 0x403883a8, size = 147360
[plustek_pp] *** DETECTION DONE, result: 0 ***
[plustek_pp] Switching lamp 0 on.
[plustek_pp] ptdrvClose()
[plustek_pp] *** cleanup buffers ***
[plustek_pp] MiscRestorePort()
[plustek_pp] Releasing parport
[sanei_pp] sanei_pp_release: fd = 0
[plustek_pp] MiscGetModelName - id = 15
[plustek_pp] pt_drv0: 9636T/12000T found
[plustek_pp] pt_drv0: Lamp-Timer set to 180 seconds.
[plustek_pp] pt_drv0: WarmUp period set to 30 seconds.
[plustek_pp] pt_drv0: Lamp untouched on driver unload.
[plustek_pp] Lamp-Timer started!
[plustek_pp] ioctl(_PTDRV_OPEN_DEVICE)
[plustek_pp] Lamp-Timer stopped!
[plustek_pp] Init settings done
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[sanei_pp] sanei_pp_claim: fd = 0
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-detection (ASIC 98001)
[plustek_pp] ************* ASIC98001 *************
[plustek_pp] ModelSet9636()
[plustek_pp] ModelSet9360()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9630() done.
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet9636() done.
[plustek_pp] P9636InitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnBiDirRead<
[plustek_pp] MotorInitialize()
[plustek_pp] 0x81
[plustek_pp] CCID = 0x00
[plustek_pp] P9636InitAsic() done.
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x80 and status=0x10, port=0x0
[plustek_pp] ioP98ReadWriteTest()
[plustek_pp] Putting Scanner (ASIC 98001) into Idle-Mode
[plustek_pp] detectScannerConnection() returns 0.
[plustek_pp] p9636InitP98001(0)
[plustek_pp] bData = 0x0000, PCB-ID = 0x00
[plustek_pp] CCD-ID = 0x00 = _CCD_3797
[plustek_pp] bSetScanModeFlag = 0
[plustek_pp] *** setupBuffers ***
[plustek_pp] Driverbuf(147360 bytes) needed !
[plustek_pp] pColorRunTab = 0x4038c534 - 0x4038bfa8
[plustek_pp] Adjust for 98001 ASIC
[plustek_pp] sb2 = 0x40368008, sb1 = 0x40372be8, Color = 0x40382db8
[plustek_pp] Pro = 0x403883a8, size = 147360
[plustek_pp] *** DETECTION DONE, result: 0 ***
[plustek_pp] ioctl(_PTDRV_ADJUST)
[plustek_pp] Adjusting device 0
[plustek_pp] warmup: -1
[plustek_pp] lampOff: -1
[plustek_pp] lampOffOnEnd: -1
[plustek_pp] ioctl(_PTDRV_GET_CAPABILITES)
[plustek_pp] ioctl(_PTDRV_GET_LENSINFO)
[plustek_pp] Scanner information:
[plustek_pp] Vendor : Plustek
[plustek_pp] Model : 9636T/12000T
[plustek_pp] Asic : 0x81
[plustek_pp] Flags : 0x00000280
[plustek_pp] drvclose()
[plustek_pp] ioctl(_PTDRV_STOP_SCAN)
[plustek_pp] Waiting for Sensor to be back in position
[plustek_pp] - done !
[plustek_pp] ioctl(_PTDRV_CLOSE_DEVICE)
[plustek_pp] *** cleanup buffers ***
[plustek_pp] Putting Scanner (ASIC 98001) into Idle-Mode
[plustek_pp] Lamp-Timer started!
[plustek_pp] ptdrvClose()
[plustek_pp] MiscRestorePort()
[plustek_pp] Releasing parport
[sanei_pp] sanei_pp_release: fd = 0
[plustek_pp] attach: model = >9636T/12000T<
[plustek_pp] sane_get_devices (0xbfff5ed8, 0)
device `plustek_pp:parport0' is a Plustek 9636T/12000T parallel port flatbed scanner
[plustek_pp] sane_exit
[plustek_pp] ptdrvShutdown()
[plustek_pp] cleanup device 0
[plustek_pp] Lamp-Timer stopped!
[plustek_pp] Try to claim the parport
[sanei_pp] sanei_pp_claim: fd = 0
[plustek_pp] Putting Scanner (ASIC 98001) into Idle-Mode
[plustek_pp] Releasing parport
[sanei_pp] sanei_pp_release: fd = 0
[sanei_pp] sanei_pp_close: fd = 0
[sanei_pp] sanei_pp_close: freeing resources
[sanei_pp] pp_close: fd=0
[sanei_pp] pp_close: this is port 'parport0'
[sanei_pp] pp_close: trying to free io port
[sanei_pp] pp_close: marking port as unused
[sanei_pp] sanei_pp_close: finished
Code: Alles auswählen
plustek
plustek_pp
Code: Alles auswählen
[direct]
device 0x378
#
# leave the default values as specified in /etc/modules.conf
#
option warmup -1
option lOffOnEnd -1
option lampOff -1
# model override switch, mostly for cosmetic changes, if the autodetection
# does not work or could not work correctly
#option mov 7
#
# example for accessing the scanner via libieee1284
#
[direct]
device parport0
#
# example for accessing the scanner via the kernel module
#
#[kernel]
#device /dev/pt_drv
#option warmup -1
#option lOffOnEnd -1
#option lampOff -1
Da ich diese Prozedur jetzt doch mehrmals durchgezogen habe, bin ich ohne jeglichen Rat, wie ich weitermachen kann. Ich hoffe auch hier wieder die Lösung zu finden.
Vergessen hatte ich noch:
Code: Alles auswählen
ll /dev/pt_drv*Code: Alles auswählen
crw-r--r-- 1 root root 40, 0 2004-11-27 13:18 /dev/pt_drv
crw-r--r-- 1 root root 40, 0 2004-11-27 13:18 /dev/pt_drv0
crw-r--r-- 1 root root 40, 1 2004-11-27 13:18 /dev/pt_drv1
crw-r--r-- 1 root root 40, 2 2004-11-27 13:18 /dev/pt_drv2
crw-r--r-- 1 root root 40, 3 2004-11-27 13:18 /dev/pt_drv3
Also es wäre super, wieder den eigenen Fehler, den ich momentan nicht sehe, gezeigt zu bekommen.
Vielen Dank
Andrew
