• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Nach Deinstallation von VPN keinen Zugang mehr ins Netzwerk

A

Anonymous

Gast
Hallo,
hatte versuchsweise bei Leap 15.1 den VPN Windscribe installiert, hat auch soweit alles funktioniert, auch mit der zusätzlichen Browser-App für Vivaldi und auch bei Firefox.

Als ich mir dann Windscribe wieder deinstalliert habe, da mir die Apps für Vivaldi & Firefox als ausreichend erschienen, konnte ich nach dem Neustart nicht mehr ins Netz.
Wenn ich via Konsole und sudo die Windscribe Daten aufrufe, wird mir kein Fehler angezeigt. Ich bin ausgeloggt, Windscribe ist deaktiviert ... die Firewall eben so :( (inaktiv). Leider finde ich keinen Weg, die Firewall wieder korrekt einzustellen, habe schon stundenlang daran gesessen.

Derzeit, bei Tumbleweed, ist alles korrekt, da ich Windscribe hier nur über die Browser-App nutze.

Jemand eine Idee, oder auch zwei ? Danke.
 
OP
A

Anonymous

Gast
Da bisher niemand mehr geantwortet hat, kann der Beitrag gerne geschlossen werden.
 
OP
A

Anonymous

Gast
Hallo marce, diese Infos hatte ich abends am 01.11. eingestellt, und seither hat sich niemand mehr gemeldet. Vielleicht ist auch Urlaubszeit ... oder es ist uninteressant, das Thema.
Aber hier gerne noch mal die Info, hatte ich kurz zuvor gelöscht.
Code:
linux-hv2z:~ # ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:1e:8c:1e:b0:9c brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.3/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
linux-hv2z:~ # ip r s
default via 192.168.1.1 dev eth0 proto dhcp 
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.3 
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.3 metric 100 
linux-hv2z:~ #
 
OP
A

Anonymous

Gast
Aktuell
Code:
Passwort: 
linux-hv2z:~ # ping -c 3 google.de

ping: google.de: Temporary failure in name resolution
linux-hv2z:~ # 
linux-hv2z:~ #
 
OP
A

Anonymous

Gast
@marce
Kann ich dir morgen beantworten, heute habe ich keinen Zugriff mehr, auf Leap ...
 
OP
A

Anonymous

Gast
@spoensche

Die Ausgabe vom Notebook, hier läuft auch Leap 15.1
PC muss ich nachholen, erst geht morgen.

Code:
linux-z3zt:~ # ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
    link/ether e0:69:95:14:d0:27 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 48:5d:60:22:72:f8 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.4/24 brd 192.168.1.255 scope global noprefixroute dynamic wlan0
       valid_lft 604088sec preferred_lft 604088sec
    inet6 fe80::4875:ad6c:cb6a:4d97/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
linux-z3zt:~ # ip r s
default via 192.168.1.1 dev wlan0 proto dhcp metric 600 
192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 metric 600 
linux-z3zt:~ #

Code:
linux-z3zt:~ # ping -c 3 google.de
PING google.de (216.58.205.227) 56(84) bytes of data.
64 bytes from google.de (216.58.205.227): icmp_seq=1 ttl=56 time=13.2 ms
64 bytes from google.de (216.58.205.227): icmp_seq=2 ttl=56 time=13.1 ms
64 bytes from google.de (216.58.205.227): icmp_seq=3 ttl=56 time=12.6 ms

--- google.de ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 12.652/13.012/13.233/0.273 ms
linux-z3zt:~ #

@marce

/etc/resolv.conf

Code:
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
#     NETCONFIG_DNS_STATIC_SEARCHLIST
#     NETCONFIG_DNS_STATIC_SERVERS
#     NETCONFIG_DNS_FORWARDER
# or disable DNS configuration updates via netconfig by setting:
#     NETCONFIG_DNS_POLICY=''
#
# See also the netconfig(8) manual page and other documentation.
#
# Note: Manual change of this file disables netconfig too, but
# may get lost when this file contains comments or empty lines
# only, the netconfig settings are same with settings in this
# file and in case of a "netconfig update -f" call.
#
### Please remove (at least) this line when you modify the file!
nameserver fe80::1%wlan0
 
OP
A

Anonymous

Gast
@spoensche & @marce

Habe eben den PC mit Leap gestartet, weder
Code:
IP a s
noch
Code:
IP r s
kann ich erfolgreich ausführen. Bei
Code:
etc/resolv/conf
in Dolphin ist keine Datei/Ordner vorhanden; auch die manuelle Suche brachte nichts zum Vorschein.
Wenn ich auf Updates aktualisierien klicke, in der Leiste unten rechts, dann kommt eine Fehlermeldung:
Keine Netzwerkverbindung vorhanden

Seit vorgestern habe ich dort an der Konfig/Netzwerkeinstellungen nichts verändert. Meine letzten Einträge (6. Nov 2019, 18:31) habe ich test-weise von meinem Notebook abgerufen, auch 15.1; dort geht alles.
 

susejunky

Moderator
Teammitglied
Hallo palux,
palux schrieb:
... Bei
Code:
etc/resolv/conf
in Dolphin ist keine Datei/Ordner vorhanden; auch die manuelle Suche brachte nichts zum Vorschein.
die benötigte Datei ist nicht "etc/resolv/conf" sondern "/etc/resolv.conf" (Schreibfehler?).

Kannst Du auf Deinem PC mit
Code:
# netconfig -f update
(als Administrator) eine neue Datei "/etc/resolv.conf" erzeugen und falls ja, was ist deren Inhalt?

Was passiert, wenn Du die Datei "/etc/resolv.conf" von Deinem Notebook auf Deinen PC übernimmst (PC neu starten nach dem Einspielen)?

Viele Grüße

susejunky
 
OP
A

Anonymous

Gast
Hallo,
danke, war ein Tippfehler von mir mit
Code:
etc/resolv/conf
Habe das nun noch mal gespeichert und auch eine resolv.conf erzeugt
Code:
### /etc/resolv.conf is a symlink to /var/run/netconfig/resolv.conf
### autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
#     NETCONFIG_DNS_STATIC_SEARCHLIST
#     NETCONFIG_DNS_STATIC_SERVERS
#     NETCONFIG_DNS_FORWARDER
# or disable DNS configuration updates via netconfig by setting:
#     NETCONFIG_DNS_POLICY=''
#
# See also the netconfig(8) manual page and other documentation.
#
### Call "netconfig update -f" to force adjusting of /etc/resolv.conf.
search localdomain
nameserver 192.168.1.1
nameserver fe80::1%enp0s7

Die werde ich gleich auf mein Leap übertragen, dann melde ich mich noch mal.
Danke, soweit.
 
OP
A

Anonymous

Gast
Hallo susejunky,
hat geklappt, vielen Dank.
Habe eine neue resolv.conf erzeugt, mit Kate gespeichert und auf Leap übertragen. Nach dem Neustart war die Nw-Verbindung sofort da, hatte 48 Updates, plus 7 Sicherheitsrelevante, nach acht Tagen. Alles läuft wieder rund.

Hier noch die Werte, die @sponsche & @marce zuvor gefragt hatten; vielleicht hilft dir das auch weiter, ich selbst kann den Fehler nicht nachvollziehen ...

Code:
Passwort: 
unknown001e8c1eb09c:~ # IP a s
If 'IP' is not a typo you can use command-not-found to lookup the package that contains it, like this:
    cnf IP
unknown001e8c1eb09c:~ # IP r s
If 'IP' is not a typo you can use command-not-found to lookup the package that contains it, like this:
    cnf IP
unknown001e8c1eb09c:~ # ping -c 3 google.de
PING google.de (216.58.205.227) 56(84) bytes of data.
64 bytes from google.de (216.58.205.227): icmp_seq=1 ttl=56 time=12.3 ms
64 bytes from google.de (216.58.205.227): icmp_seq=2 ttl=56 time=11.5 ms
64 bytes from google.de (216.58.205.227): icmp_seq=3 ttl=56 time=11.8 ms

--- google.de ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 11.595/11.938/12.379/0.327 ms
unknown001e8c1eb09c:~ #

und

Code:
### /etc/resolv.conf is a symlink to /var/run/netconfig/resolv.conf
### autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
#     NETCONFIG_DNS_STATIC_SEARCHLIST
#     NETCONFIG_DNS_STATIC_SERVERS
#     NETCONFIG_DNS_FORWARDER
# or disable DNS configuration updates via netconfig by setting:
#     NETCONFIG_DNS_POLICY=''
#
# See also the netconfig(8) manual page and other documentation.
#
### Call "netconfig update -f" to force adjusting of /etc/resolv.conf.
search localdomain
nameserver 192.168.1.1
nameserver fe80::1%enp0s7

Gute Frage zum Schluss:
Als ich VPN Wordscribe installiert hatte, lief alles fehlerfrei. Da ich Wordscribe wieder via YaST deinstalliert habe, sollte doch eigentlich der Ursprungs-Zustand wieder hergestellt werden!? Was ist hier schief gelaufen?
Fall du eine Antwort hast - würde mich interessieren. Danke nochmals für die Hilfe, auch an die anderen.
 

susejunky

Moderator
Teammitglied
Hallo palux,
palux schrieb:
... Als ich VPN Wordscribe installiert hatte, lief alles fehlerfrei. Da ich Wordscribe wieder via YaST deinstalliert habe, sollte doch eigentlich der Ursprungs-Zustand wieder hergestellt werden!? Was ist hier schief gelaufen?
ich kenne das von Dir de-/installierte Paket nicht und kann Dir daher diese Fragen nicht beantworten. Aber vielleicht findet sich hier noch jemand, der Dir Deine Fragen beantworten kann.

Viele Grüße

susejunky
 

marce

Guru
Vermutlich werden eben bei der Deinstallation nicht alle Änderungen, z.B. an der resolv.conf, zurückgenommen.
 
OP
A

Anonymous

Gast
Davon ist dann auszugehen, auch wenn es nicht die beste Lösung ist.

Läuft alles wieder. Danke noch mal für die Hilfe.
 
Oben