• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Opensuse 15.1 bootet langsam

T

thio

Hallo mein Opensuse Leap 15.1 bootet recht langsam..

(Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz mit 8 GM Ram)

Code: 
@linux:~> systemd-analyze time
Startup finished in 4.270s (firmware) + 9.703s (loader) + 3.266s (kernel) + 4.911s (initrd) + 1min 18.107s (userspace) = 1min 40.260s

Code: 
@linux:~> systemd-analyze blame
         37.063s mandb.service
         23.924s backup-rpmdb.service
         20.801s plymouth-quit-wait.service
         17.873s systemd-journal-flush.service
         11.247s btrfsmaintenance-refresh.service
         10.896s display-manager.service
          9.494s ca-certificates.service
          8.248s ModemManager.service
          7.022s postfix.service
          6.708s lvm2-monitor.service
          6.572s SuSEfirewall2_init.service
          5.246s backup-sysconfig.service
          4.798s NetworkManager.service
          3.816s initrd-switch-root.service
          3.741s apparmor.service
          3.579s SuSEfirewall2.service
          2.936s logrotate.service
          2.151s systemd-fsck@dev-disk-by\x2duuid-94bec177\x2de92c\x2d4ccb\x2d825b\x2d182e34e74df9.service
          2.040s polkit.service
          1.630s systemd-udevd.service
          1.609s nscd.service
          1.153s avahi-daemon.service
          1.113s plymouth-read-write.service
          1.104s sound-extra.service
          1.074s wpa_supplicant.service
           903ms auditd.service
           815ms systemd-tmpfiles-setup.service
           703ms systemd-tmpfiles-setup-dev.service
           697ms systemd-logind.service
           673ms systemd-modules-load.service
           623ms dracut-shutdown.service
           581ms kbdsettings.service
           549ms dev-disk-by\x2duuid-04d5ea48\x2dc0ac\x2d4b1b\x2dba0c\x2d54811d8b4453.swap
           505ms user@1001.service
           499ms ntpd.service
           447ms udisks2.service
           368ms plymouth-start.service
           327ms plymouth-switch-root.service
           305ms sysroot.mount
           304ms upower.service                                                                                                                                         
           288ms check-battery.service                                                                                                                                  
           279ms systemd-rfkill.service                                                                                                                                 
           275ms systemd-remount-fs.service                                                                                                                             
           274ms boot-efi.mount                                                                                                                                         
           267ms dev-mqueue.mount

Habt Ihr Erklärungen und "Tuning Tips" ?!
 
S

Sauerland

3.579s SuSEfirewall2.service
Zum Vergrößern anklicken....
Schau mal nach, was da installiert ist:
Code: 
zypper se -si firewall
Denn SuSEfirewall2 ist ersetzt von firewalld........




6.708s lvm2-monitor.service
Zum Vergrößern anklicken....
Wenn kein lvm (Logical Volume Manager) eingerichtet ist, kannst du alles mit lvm2 im Namen löschen, was sich ohne große Abhängigkeitsprobleme löschen lässt.
Hier auf meiner Leap 15.0 geht das nicht, da libvirt installiert, auf meinem Laptop hab ich es aber deinstallieren können:
Code: 
2019-08-23 17:54:43|command|root@hp-laptop|'zypper' 'rm' 'liblvm2app2_2'|
# 2019-08-23 17:54:44 lvm2-2.02.180-lp151.3.2.x86_64 removed ok
# Removed /etc/systemd/system/sysinit.target.wants/lvm2-monitor.service.
# Removed /etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.socket.
# Warning: Stopping lvm2-lvmetad.service, but it can still be activated by:
#   lvm2-lvmetad.socket
2019-08-23 17:54:44|remove |lvm2|2.02.180-lp151.3.2|x86_64||
2019-08-23 17:54:44|remove |liblvm2app2_2|2.02.180-lp151.3.2|x86_64|root@hp-laptop|
2019-08-23 17:55:13|command|root@hp-laptop|'zypper' 'rm' 'liblvm2cmd2_02'|
2019-08-23 17:55:13|remove |liblvm2cmd2_02|2.02.180-lp151.3.2|x86_64|root@hp-laptop|
Hintergrund:
https://forums.opensuse.org/showthread.php/536796-H%C3%A4ngt-beim-Herunterfahren?p=2912266#post2912266 und folgende
https://bbs.archlinux.org/viewtopic.php?id=244817
usw.
 
OP
T

thio

Code: 
S  | Name             | Typ   | Version            | Arch   | Repository     
---+------------------+-------+--------------------+--------+----------------
i+ | SuSEfirewall2    | Paket | 3.6.378-lp151.2.21 | noarch | LEAP15.1 - REPO
i+ | SuSEfirewall2    | Paket | 3.6.378-lp151.2.21 | noarch | 151_iso        
i+ | firewall-macros  | Paket | 0.5.5-lp151.5.1    | noarch | LEAP15.1 - REPO
i+ | firewall-macros  | Paket | 0.5.5-lp151.5.1    | noarch | 151_iso        
i+ | firewalld        | Paket | 0.5.5-lp151.5.1    | noarch | LEAP15.1 - REPO
i+ | firewalld        | Paket | 0.5.5-lp151.5.1    | noarch | 151_iso        
i+ | firewalld-lang   | Paket | 0.5.5-lp151.5.1    | noarch | LEAP15.1 - REPO
i+ | firewalld-lang   | Paket | 0.5.5-lp151.5.1    | noarch | 151_iso        
i+ | python3-firewall | Paket | 0.5.5-lp151.5.1    | noarch | LEAP15.1 - REPO
i+ | python3-firewall | Paket | 0.5.5-lp151.5.1    | noarch | 151_iso        
i+ | yast2-firewall   | Paket | 4.1.12-lp151.1.1   | noarch | LEAP15.1 - REPO
i+ | yast2-firewall   | Paket | 4.1.12-lp151.1.1   | noarch | 151_iso

Bedeutet ich kann "SUSEfirewall2" relativ bedenkenlos löschen, oder?
 
S

Sauerland

Das ist bei mir installiert, was fehlt, kannst du nachinstallieren:
Code: 
zypper se -si firewall
Loading repository data...
Reading installed packages...

S  | Name             | Type    | Version          | Arch   | Repository     
---+------------------+---------+------------------+--------+----------------
i+ | firewall-config  | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i  | firewall-macros  | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i+ | firewalld        | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i  | firewalld-lang   | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i  | python3-firewall | package | 0.5.5-lp151.5.1  | noarch | Main Repository
i+ | yast2-firewall   | package | 4.1.12-lp151.1.1 | noarch | Main Repository
PS:
Und deine Repoliste kannst du auch mal posten:
Code: 
zypper lr -d
 
OP
T

thio

So, wurde schon minimal besser..

Code: 
@linux:~> systemd-analyze time 
Startup finished in 2.802s (firmware) + 9.718s (loader) + 3.265s (kernel) + 4.982s (initrd) + 54.507s (userspace) = 1min 15.276s

Code: 
@linux:~> systemd-analyze blame
         21.116s systemd-journal-flush.service
         15.018s plymouth-quit-wait.service
          8.597s home.mount
          7.918s ca-certificates.service
          7.722s ModemManager.service
          7.507s btrfsmaintenance-refresh.service
          7.203s systemd-fsck@dev-disk-by\x2duuid-94bec177\x2de92c\x2d4ccb\x2d825b\x2d182e34e74df9.service
          6.634s lvm2-monitor.service
          4.876s postfix.service
          4.773s NetworkManager.service
          4.447s apparmor.service
          3.615s initrd-switch-root.service
          1.828s display-manager.service
          1.777s polkit.service
          1.762s kbdsettings.service
          1.734s ntpd.service
          1.716s avahi-daemon.service
          1.711s mcelog.service
          1.609s systemd-udevd.service
          1.304s nscd.service
          1.276s plymouth-read-write.service
          1.161s systemd-tmpfiles-setup.service

Kann man bei den großen Brocken was erkennen und somit "beschleunigen"?

Code: 
@linux:~> zypper se -si plymouth
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S  | Name                       | Typ   | Version                               | Arch   | Repository          
---+----------------------------+-------+---------------------------------------+--------+---------------------
i+ | plymouth                   | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS
i+ | plymouth-branding-openSUSE | Paket | 15.1-lp151.2.2                        | noarch | Leap 15.1 OSS Repo  
i+ | plymouth-branding-openSUSE | Paket | 15.1-lp151.2.2                        | noarch | Leap 15.1 ISO       
i+ | plymouth-dracut            | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS
i+ | plymouth-plugin-label      | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS
i+ | plymouth-plugin-label-ft   | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS
i+ | plymouth-plugin-script     | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS
i+ | plymouth-plugin-two-step   | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS
i+ | plymouth-scripts           | Paket | 0.9.4+git20190304.ed9f201-lp151.2.3.1 | x86_64 | Update Leap 15.1 OSS


Code: 
@linux:~> zypper se -si systemd
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S  | Name                              | Typ   | Version           | Arch   | Repository          
---+-----------------------------------+-------+-------------------+--------+---------------------
i+ | grub2-systemd-sleep-plugin        | Paket | 2.02-lp151.21.6.1 | noarch | Update Leap 15.1 OSS
i+ | libsystemd0                       | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | libsystemd0                       | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 ISO       
i+ | libsystemd0-32bit                 | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | libsystemd0-32bit                 | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 ISO       
i+ | systemd                           | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | systemd                           | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 ISO       
i+ | systemd-32bit                     | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | systemd-32bit                     | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 ISO       
i+ | systemd-bash-completion           | Paket | 234-lp151.25.7    | noarch | Leap 15.1 OSS Repo  
i+ | systemd-bash-completion           | Paket | 234-lp151.25.7    | noarch | Leap 15.1 ISO       
i+ | systemd-coredump                  | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | systemd-logger                    | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | systemd-presets-branding-openSUSE | Paket | 12.2-lp151.13.2   | noarch | Leap 15.1 OSS Repo  
i+ | systemd-presets-branding-openSUSE | Paket | 12.2-lp151.13.2   | noarch | Leap 15.1 ISO       
i+ | systemd-presets-common-SUSE       | Paket | 15-lp151.7.1      | noarch | Leap 15.1 OSS Repo  
i+ | systemd-presets-common-SUSE       | Paket | 15-lp151.7.1      | noarch | Leap 15.1 ISO       
i+ | systemd-rpm-macros                | Paket | 3-lp151.6.75      | noarch | Leap 15.1 OSS Repo  
i+ | systemd-sysvinit                  | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 OSS Repo  
i+ | systemd-sysvinit                  | Paket | 234-lp151.25.7    | x86_64 | Leap 15.1 ISO                                                                             
i+ | util-linux-systemd                | Paket | 2.33.1-lp151.2.23 | x86_64 | Leap 15.1 OSS Repo                                                                        
i+ | util-linux-systemd                | Paket | 2.33.1-lp151.2.23 | x86_64 | Leap 15.1 ISO
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben