Diese Website existiert nur weil wir Werbung mit AdSense ausliefern.
Bitte den AdBlocker daher auf dieser Website ausschalten! Danke.

Touchpad wird nicht erkannt

Alles rund um Hardware, die unter Linux läuft oder zum Laufen gebracht werden soll

Moderator: Moderatoren

Antworten
drummer_michi
Newbie
Newbie
Beiträge: 4
Registriert: 12. Mär 2018, 19:11

Touchpad wird nicht erkannt

Beitrag von drummer_michi » 12. Mär 2018, 19:21

Hallo zusammen,
Ich habe mir einen neuen Laptop aus China (Teclast F7) zugelegt. Unter Windows (was ich gleich durch Antergos ersetzt habe) funktionierte das Touchpad noch ganz normal, aber unter Antergos wird es mir nichtmal angezeigt, wenn ich xinput in der Konsole eingebe.
Hab auch schon gegooglet und rausgefunden, dass ich in der grub Konfig die Zeile hinzufügen muss:

Code: Alles auswählen

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop"
Das hat aber auch nichts geholfen.
Ich hoffe ihr könnt mir weiterhelfen
Grüße Michi

Werbung:
Benutzeravatar
Geier0815
Administrator
Administrator
Beiträge: 4256
Registriert: 14. Jun 2004, 09:12

Re: Touchpad wird nicht erkannt

Beitrag von Geier0815 » 13. Mär 2018, 09:21

grub-mkconfig hast Du nach ändern der Konfiguration aber schon laufen lassen?
Wenn Windows die Lösung ist...
kann ich dann bitte das Problem zurück haben?

drummer_michi
Newbie
Newbie
Beiträge: 4
Registriert: 12. Mär 2018, 19:11

Re: Touchpad wird nicht erkannt

Beitrag von drummer_michi » 16. Mär 2018, 06:17

Ja hab ich

spoensche
Moderator
Moderator
Beiträge: 7325
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Touchpad wird nicht erkannt

Beitrag von spoensche » 18. Mär 2018, 18:55

Poste mal die Ausgabe von

Code: Alles auswählen

dmesg | egrep -i "err|warn|fail|crit|input"
und von

Code: Alles auswählen

egrep "EE|WW" /var/log/Xorg.0.log

drummer_michi
Newbie
Newbie
Beiträge: 4
Registriert: 12. Mär 2018, 19:11

Re: Touchpad wird nicht erkannt

Beitrag von drummer_michi » 20. Mär 2018, 18:14

spoensche hat geschrieben:
18. Mär 2018, 18:55
Poste mal die Ausgabe von

Code: Alles auswählen

dmesg | egrep -i "err|warn|fail|crit|input"
und von

Code: Alles auswählen

egrep "EE|WW" /var/log/Xorg.0.log
Hab Antergos mal vom USB Stick gebootet, weil ich grad wieder auf Windows bin, da ich das Touchpad brauche. Hier das Ergebnis von den beiden Commands:

Code: Alles auswählen

[antergos@ant-18.3 ~]$ dmesg | egrep -i "err|warn|fail|crit|input"
[    0.000000] Command line: initrd=\EFI\archiso\intel_ucode.img initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ANTERGOS modules-load=loop rd.modules-load=loop udev.log-priority=crit rd.udev.log-priority=crit quiet splash
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Kernel command line: initrd=\EFI\archiso\intel_ucode.img initrd=\EFI\archiso\archiso.img archisobasedir=arch archisolabel=ANTERGOS modules-load=loop rd.modules-load=loop udev.log-priority=crit rd.udev.log-priority=crit quiet splash
[    0.135448] ACPI: EC: interrupt blocked
[    0.240346] ACPI: Using IOAPIC for interrupt routing
[    0.567638] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.567909] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.568182] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.568447] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.568713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.568979] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.569253] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.569520] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.573001] ACPI Warning: GPE type mismatch (level/edge) (20170831/evxface-826)
[    0.573001] ACPI: EC: interrupt unblocked
[    7.645655] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:00/PNP0C0D:00/input/input0
[    7.645876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    7.676738] RAS: Correctable Errors collector initialized.
[    7.959690] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    9.506253] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    9.666570] sdhci: Copyright(c) Pierre Ossman
[    9.694771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   12.512827] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   12.512834] mmcblk1: error -110 transferring data, sector 512, nr 512, cmd response 0x900, card status 0x0
[   14.432490] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   14.432493] mmcblk1: error -110 transferring data, sector 15350904, nr 168, cmd response 0x900, card status 0x0
[   18.126408] int3403 thermal: probe of INT3403:05 failed with error -22
[   18.167304] input: Intel HID events as /devices/platform/INT33D5:00/input/input5
[   18.167376] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input6
[   18.392553] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.454950] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[   18.455054] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[   18.455142] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[   18.455223] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[   18.455333] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[   18.455421] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[   18.455504] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[   18.497935] input: PC Speaker as /devices/platform/pcspkr/input/input14
[   18.918821] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   18.918828] cfg80211: failed to load regulatory.db
[   19.017262] input: USB 2.0 PC Camera: PC Camera as /devices/pci0000:00/0000:00:15.0/usb1/1-8/1-8:1.0/input/input16
[   19.134426] EDAC pnd2: Failed to register device with error -22.
[   19.160981] EDAC pnd2: Failed to register device with error -22.
[   19.552477] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   19.552482] mmcblk1: error -110 transferring data, sector 15351416, nr 128, cmd response 0x900, card status 0x0
[   19.715423] thermal thermal_zone4: failed to read out thermal zone (-61)
[   21.216507] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   21.216511] mmcblk1: error -110 transferring data, sector 15348736, nr 512, cmd response 0x900, card status 0x0
[   23.008808] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   23.008812] mmcblk1: error -110 transferring data, sector 1050504, nr 104, cmd response 0x900, card status 0x0
[   45.089076] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   45.089084] mmcblk1: error -110 transferring data, sector 1050624, nr 32, cmd response 0x900, card status 0x0
[   47.334719] rfkill: input handler disabled
[   53.089400] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x800b00
[   53.099156] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261907
[   53.103886] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261909
[   53.107798] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261909
[   53.112399] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261907
[   53.115858] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261907
[   53.122203] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261909
[   53.125528] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261909
[   53.130083] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261907
[   53.133579] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261907
[   53.138197] EXT4-fs error (device mmcblk1p2): ext4_lookup:1575: inode #260102: comm gvfs-udisks2-vo: deleted inode referenced: 261909
[   54.176619] mmcblk1: error -110 sending stop command, original cmd response 0x900, card status 0x900
[   54.176623] mmcblk1: error -110 transferring data, sector 5245184, nr 264, cmd response 0x900, card status 0x0
[  100.367318] input: Laview Technology Mionix Naos 7000 as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.0/0003:22D4:130C.0001/input/input17
[  100.367517] hid-generic 0003:22D4:130C.0001: input,hidraw0: USB HID v1.00 Mouse [Laview Technology Mionix Naos 7000] on usb-0000:00:15.0-2/input0
[  100.367726] input: Laview Technology Mionix Naos 7000 as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2:1.1/0003:22D4:130C.0002/input/input18
[  100.420263] hid-generic 0003:22D4:130C.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [Laview Technology Mionix Naos 7000] on usb-0000:00:15.0-2/input1

Code: Alles auswählen

[antergos@ant-18.3 ~]$ egrep "EE|WW" /var/log/Xorg.0.log
[    32.788] Current Operating System: Linux ant-18.3 4.15.6-1-ARCH #1 SMP PREEMPT Sun Feb 25 12:53:23 UTC 2018 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    32.819] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[    32.819] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    32.819] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    32.819] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    32.819] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    32.835] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    33.071] (WW) Falling back to old probe method for modesetting
[    33.072] (WW) Falling back to old probe method for fbdev
Ich hoffe das hilft, danke schonmal im vorraus

spoensche
Moderator
Moderator
Beiträge: 7325
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Touchpad wird nicht erkannt

Beitrag von spoensche » 20. Mär 2018, 20:13

Die mmcblk und die anderen Probe bzw. Device registration Fehler machen mir gerade mehr Sorgen als dein Touchpad.

Poste mal bitte die Ausgabe von

Code: Alles auswählen

dmesg | egrep -i "err|warn|fail|acpi|mmc"

drummer_michi
Newbie
Newbie
Beiträge: 4
Registriert: 12. Mär 2018, 19:11

Re: Touchpad wird nicht erkannt

Beitrag von drummer_michi » 20. Mär 2018, 20:41

spoensche hat geschrieben:
20. Mär 2018, 20:13
Die mmcblk und die anderen Probe bzw. Device registration Fehler machen mir gerade mehr Sorgen als dein Touchpad.
Die mmcblk Fehler müssten von der micro SD Karte kommen die ich eingelegt habe. mmcblk0 ist der interne Speicher, es wird aber nur mmcblk1 erwähnt, was eben die Speicherkarte ist. Hab sie mal rausgenommen, da ich sie eigentlich eh nicht brauche.
Trotzdem hier noch die Ausgabe von dem Command:

Code: Alles auswählen

[antergos@ant-18.3 ~]$ dmesg | egrep -i "err|warn|fail|acpi|mmc"
[    0.000000] BIOS-e820: [mem 0x0000000079a18000-0x0000000079a33fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000079a34000-0x0000000079a93fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a1a1000-0x000000007a1a1fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000079a18000-0x0000000079a33fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000079a34000-0x0000000079a93fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007a1a1000-0x000000007a1a1fff] ACPI NVS
[    0.000000] efi:  ACPI=0x79a1d000  ACPI 2.0=0x79a1d000  SMBIOS=0x79c8c000  SMBIOS 3.0=0x79c8b000  ESRT=0x72915918 
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000079A1D000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x0000000079A1D0C0 0000EC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x0000000079A25F40 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000079A1D250 008CE8 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x0000000079A93080 000040
[    0.000000] ACPI: FPDT 0x0000000079A26060 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x0000000079A260B0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MSDM 0x0000000079A26150 000055 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x0000000079A261B0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: DBG2 0x0000000079A261F0 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: DBGP 0x0000000079A26270 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: HPET 0x0000000079A262B0 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: LPIT 0x0000000079A262F0 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: APIC 0x0000000079A26350 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: NPKT 0x0000000079A263E0 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: PRAM 0x0000000079A26450 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WSMT 0x0000000079A26480 000028 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x0000000079A264B0 00414C (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x0000000079A2A600 003621 (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x0000000079A2DC30 00077D (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x0000000079A2E3B0 001611 (v01 Intel_ Platform 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079A2F9D0 00039D (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079A2FD70 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079A304A0 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079A307D0 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x0000000079A30950 002760 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x0000000079A330B0 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: BGRT 0x0000000079A33100 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: WDAT 0x0000000079A33140 000104 (v01                 00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.081062] PM: Registering ACPI NVS region [mem 0x79a34000-0x79a93fff] (393216 bytes)
[    0.081090] PM: Registering ACPI NVS region [mem 0x7a1a1000-0x7a1a1fff] (4096 bytes)
[    0.087236] ACPI: bus type PCI registered
[    0.087240] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.087426] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.087434] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.091250] ACPI: Added _OSI(Module Device)
[    0.091253] ACPI: Added _OSI(Processor Device)
[    0.091256] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.091258] ACPI: Added _OSI(Processor Aggregator Device)
[    0.093151] ACPI: Executed 5 blocks of module-level executable AML code
[    0.126753] ACPI: Dynamic OEM Table Load:
[    0.126773] ACPI: SSDT 0xFFFF9C06B7D66600 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.128439] ACPI: Dynamic OEM Table Load:
[    0.128454] ACPI: SSDT 0xFFFF9C06B7D67000 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.129384] ACPI: Dynamic OEM Table Load:
[    0.129398] ACPI: SSDT 0xFFFF9C06B7D2A780 00008D (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.133444] ACPI: EC: EC started
[    0.133447] ACPI: EC: interrupt blocked
[    0.240261] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC
[    0.240267] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.240272] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions
[    0.240274] ACPI: Interpreter enabled
[    0.240347] ACPI: (supports S0 S3 S4 S5)
[    0.240351] ACPI: Using IOAPIC for interrupt routing
[    0.240458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.241775] ACPI: GPE 0x0F active on init
[    0.241852] ACPI: GPE 0x2C active on init
[    0.241912] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.255170] ACPI: Power Resource [SPPR] (on)
[    0.255794] ACPI: Power Resource [SPPR] (on)
[    0.256729] ACPI: Power Resource [UPPR] (on)
[    0.257390] ACPI: Power Resource [PX03] (on)
[    0.258747] ACPI: Power Resource [UPPR] (on)
[    0.259211] ACPI: Power Resource [UPPR] (on)
[    0.260249] ACPI: Power Resource [UPPR] (on)
[    0.260822] ACPI: Power Resource [UPPR] (on)
[    0.261284] ACPI: Power Resource [UPPR] (on)
[    0.261920] ACPI: Power Resource [USBC] (on)
[    0.262331] ACPI: Power Resource [LSPR] (on)
[    0.271602] ACPI: Power Resource [SDPR] (on)
[    0.280367] ACPI: Power Resource [PXP] (on)
[    0.392099] ACPI: Power Resource [PXP] (on)
[    0.502188] ACPI: Power Resource [PXP] (off)
[    0.504267] ACPI: Power Resource [PXP] (off)
[    0.506332] ACPI: Power Resource [PAUD] (on)
[    0.517552] ACPI: Power Resource [FN00] (on)
[    0.520467] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.520485] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.523655] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.564784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.565076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.565365] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.565645] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.565936] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.566209] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.566475] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.566743] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.569649] ACPI Warning: GPE type mismatch (level/edge) (20170831/evxface-826)
[    0.569649] ACPI: EC: interrupt unblocked
[    0.569649] ACPI: EC: event unblocked
[    0.569649] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.569649] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.595068] PCI: Using ACPI for IRQ routing
[    0.663665] pnp: PnP ACPI init
[    0.664339] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.666805] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.666959] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.667099] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.667610] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.668907] pnp: PnP ACPI: found 5 devices
[    0.680986] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    7.701831] ACPI: Lid Switch [LID0]
[    7.702036] ACPI: Power Button [PWRB]
[    7.709947] ACPI: Thermal Zone [TZ01] (28 C)
[    7.733263] RAS: Correctable Errors collector initialized.
[    8.013512] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.576250] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[    9.718578] ACPI: bus type USB registered
[    9.723776] sdhci: Copyright(c) Pierre Ossman
[    9.726604] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[    9.817187] mmc0: new HS400 MMC card at address 0001
[    9.819257] mmcblk0: mmc0:0001 DF4064 58.2 GiB 
[    9.819384] mmcblk0boot0: mmc0:0001 DF4064 partition 1 4.00 MiB
[    9.819501] mmcblk0boot1: mmc0:0001 DF4064 partition 2 4.00 MiB
[    9.819581] mmcblk0rpmb: mmc0:0001 DF4064 partition 3 4.00 MiB, chardev (244:0)
[    9.823617]  mmcblk0: p1 p2 p3 p4
[   14.724272] int3403 thermal: probe of INT3403:05 failed with error -22
[   14.997425] ACPI: Battery Slot [BAT0] (battery present)
[   15.001209] ACPI: AC Adapter [ADP1] (on-line)
[   15.336739] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   15.336745] cfg80211: failed to load regulatory.db
[   15.782636] EDAC pnd2: Failed to register device with error -22.
[   15.816330] EDAC pnd2: Failed to register device with error -22.
[   16.092420] thermal thermal_zone4: failed to read out thermal zone (-61)
edit: soll ich vielleicht einfach auf den neuen Kernel warten? Dauert ja nicht mehr allzu lange bis der rauskommt und da wird es ja neue Treiber geben

spoensche
Moderator
Moderator
Beiträge: 7325
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Touchpad wird nicht erkannt

Beitrag von spoensche » 21. Mär 2018, 17:31

Boote jetzt mal das System (inkl. Desktop), bei dem das Touchpad nicht erkannt wird. Dann postest du bitte mal die Ausgabe von

Code: Alles auswählen

egrep "WW|EE" /var/log/Xorg.0.log

kuzorra
Newbie
Newbie
Beiträge: 2
Registriert: 11. Apr 2018, 22:14

Re: Touchpad wird nicht erkannt

Beitrag von kuzorra » 11. Apr 2018, 22:21

Ich klink mich hier mal ein, auch ein Teclast F7 ohne funktionierendes Touchpad (unter Linux, Win10 läuft problemlos). Ich habe auch ein Jumper EzBook 3 Pro, da läuft alles problemlos unter Windows und Linux, hat aber leider eine noch kompaktere Tastatur ohne die Zusatztasten....
Unter dmesg | egrep -i "8042" taucht auch das PS/2-Ding auf:

Code: Alles auswählen

[    2.842560] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Dann hab ich noch nach dem i2c gesucht:

Code: Alles auswählen

dmesg | egrep -i "i2c_hid"
[    5.291888] i2c_hid i2c-SYNA3602:00: i2c-SYNA3602:00 supply vdd not found, using dummy regulator
[    5.296764] i2c_hid i2c-SYNA3602:00: unexpected HID descriptor bcdVersion (0x00ff)
Leider sagt mir das alles nicht viel.

spoensche
Moderator
Moderator
Beiträge: 7325
Registriert: 30. Okt 2004, 23:53
Wohnort: Siegen

Re: Touchpad wird nicht erkannt

Beitrag von spoensche » 12. Apr 2018, 18:43

Ich habe zwei Bugreports gefunden.

https://bugs.launchpad.net/bugs/1728244

und

https://bugzilla.redhat.com/show_bug.cgi?id=1526312

Der Bugreport bei RedHat erläutert das Debuggen und mögliche Ursachen sowie Lösungen sehr detailiert. Allerdings sind tiefgehendere Linux Kenntnisse nötig.

kuzorra
Newbie
Newbie
Beiträge: 2
Registriert: 11. Apr 2018, 22:14

Re: Touchpad wird nicht erkannt

Beitrag von kuzorra » 25. Apr 2018, 00:00

Hm, aus den Bug Reports werde ich nicht schlau.

Hat das hier schon jemand probiert und kann davon berichten?
https://techtablets.com/forum/topic/tou ... -in-linux/

Wie ersetze ich die modifizierte i2c-Datei denn?
Was gibt es da zu beachten - für Noobs, die noch nie einen Kernel kompiliert haben ;-)

marce
Advanced Hacker
Advanced Hacker
Beiträge: 1009
Registriert: 19. Jun 2008, 13:16
Wohnort: Dettenhausen
Kontaktdaten:

Re: Touchpad wird nicht erkannt

Beitrag von marce » 25. Apr 2018, 14:04

kuzorra hat geschrieben:
25. Apr 2018, 00:00
Was gibt es da zu beachten - für Noobs, die noch nie einen Kernel kompiliert haben ;-)
Die einfachste Lösung ist, Hardware zu verwenden, deren Funktionsfähigkeit unter Linux nachgewiesen ist.

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste