Moin *,
ich habe ein Problem mit einem störrischen Tolino Shine 2 HD. Das Device lässt sich unter CentOS 7.4 problemlos mounten, aber auf einem anderen System unter Fedora 27 leider nicht.
CentOS:
Fedora:
Was könnte das sein?
TNX
Glückauf, gehrke
ich habe ein Problem mit einem störrischen Tolino Shine 2 HD. Das Device lässt sich unter CentOS 7.4 problemlos mounten, aber auf einem anderen System unter Fedora 27 leider nicht.
CentOS:
Code:
Feb 03 12:12:05 j2.gehrke.local kernel: usb 2-1: new high-speed USB device number 4 using ehci-pci
Feb 03 12:12:05 j2.gehrke.local kernel: usb 2-1: New USB device found, idVendor=1f85, idProduct=6053
Feb 03 12:12:05 j2.gehrke.local kernel: usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Feb 03 12:12:05 j2.gehrke.local kernel: usb 2-1: Product: tolino
Feb 03 12:12:05 j2.gehrke.local kernel: usb 2-1: Manufacturer: Telekom
Feb 03 12:12:05 j2.gehrke.local kernel: usb 2-1: SerialNumber: <xxx>
Feb 03 12:12:05 j2.gehrke.local kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
Feb 03 12:12:05 j2.gehrke.local kernel: scsi host6: usb-storage 2-1:1.0
Feb 03 12:12:05 j2.gehrke.local mtp-probe[12276]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1"
Feb 03 12:12:05 j2.gehrke.local mtp-probe[12276]: bus: 2, device: 4 was not an MTP device
Feb 03 12:12:06 j2.gehrke.local kernel: scsi 6:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Feb 03 12:12:06 j2.gehrke.local kernel: scsi 6:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Feb 03 12:12:06 j2.gehrke.local kernel: scsi 6:0:0:2: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Feb 03 12:12:06 j2.gehrke.local kernel: sd 6:0:0:0: Attached scsi generic sg3 type 0
Feb 03 12:12:06 j2.gehrke.local kernel: sd 6:0:0:1: Attached scsi generic sg4 type 0
Feb 03 12:12:06 j2.gehrke.local kernel: sd 6:0:0:2: Attached scsi generic sg5 type 0
Feb 03 12:12:06 j2.gehrke.local kernel: sd 6:0:0:0: [sdc] Attached SCSI removable disk
Feb 03 12:12:06 j2.gehrke.local kernel: sd 6:0:0:2: [sde] Attached SCSI removable disk
Feb 03 12:12:07 j2.gehrke.local kernel: sd 6:0:0:1: [sdd] Attached SCSI removable disk
Code:
[root@j2 ~]# lsusb -vd 1f85:6053
Bus 002 Device 004: ID 1f85:6053
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1f85
idProduct 0x6053
bcdDevice 99.99
iManufacturer 2 Telekom
iProduct 3 tolino
iSerial <xxx>
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 1 Mass Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Fedora:
Code:
Feb 03 11:46:59 j10.gehrke.local kernel: usb 2-1: new high-speed USB device number 17 using xhci_hcd
Feb 03 11:46:59 j10.gehrke.local kernel: usb 2-1: New USB device found, idVendor=1f85, idProduct=6053
Feb 03 11:46:59 j10.gehrke.local kernel: usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Feb 03 11:46:59 j10.gehrke.local kernel: usb 2-1: Product: tolino
Feb 03 11:46:59 j10.gehrke.local kernel: usb 2-1: Manufacturer: Telekom
Feb 03 11:46:59 j10.gehrke.local kernel: usb 2-1: SerialNumber: <xxx>
Feb 03 11:46:59 j10.gehrke.local kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
Feb 03 11:46:59 j10.gehrke.local kernel: scsi host4: usb-storage 2-1:1.0
Feb 03 11:46:59 j10.gehrke.local mtp-probe[22481]: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
Feb 03 11:46:59 j10.gehrke.local mtp-probe[22481]: bus: 2, device: 17 was not an MTP device
Feb 03 11:47:00 j10.gehrke.local kernel: usb 2-1: USB disconnect, device number 17
Feb 03 11:47:00 j10.gehrke.local kernel: usb 2-2: USB disconnect, device number 92
Feb 03 11:47:02 j10.gehrke.local kernel: usb 2-2: new low-speed USB device number 18 using xhci_hcd
Feb 03 11:47:02 j10.gehrke.local kernel: usb 2-2: New USB device found, idVendor=045e, idProduct=077a
Feb 03 11:47:02 j10.gehrke.local kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 03 11:47:02 j10.gehrke.local kernel: usb 2-2: Product: Express Mouse
Feb 03 11:47:02 j10.gehrke.local kernel: usb 2-2: Manufacturer: Microsoft
Feb 03 11:47:02 j10.gehrke.local kernel: input: Microsoft Express Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:077A.007F/input/input495
Feb 03 11:47:02 j10.gehrke.local kernel: hid-generic 0003:045E:077A.007F: input,hidraw0: USB HID v1.11 Mouse [Microsoft Express Mouse] on usb-0000:00:14.0-2/input0
Feb 03 11:47:02 j10.gehrke.local mtp-probe[22510]: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2"
Feb 03 11:47:02 j10.gehrke.local mtp-probe[22510]: bus: 2, device: 18 was not an MTP device
Feb 03 11:47:03 j10.gehrke.local kernel: usb 2-1: new high-speed USB device number 19 using xhci_hcd
Feb 03 11:47:03 j10.gehrke.local kernel: usb 2-1: New USB device found, idVendor=1f85, idProduct=6053
Feb 03 11:47:03 j10.gehrke.local kernel: usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Feb 03 11:47:03 j10.gehrke.local kernel: usb 2-1: Product: tolino
Feb 03 11:47:03 j10.gehrke.local kernel: usb 2-1: Manufacturer: Telekom
Feb 03 11:47:03 j10.gehrke.local kernel: usb 2-1: SerialNumber: <xxx>
Feb 03 11:47:03 j10.gehrke.local kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
Feb 03 11:47:03 j10.gehrke.local kernel: scsi host4: usb-storage 2-1:1.0
Feb 03 11:47:03 j10.gehrke.local mtp-probe[22522]: checking bus 2, device 19: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
Feb 03 11:47:03 j10.gehrke.local mtp-probe[22522]: bus: 2, device: 19 was not an MTP device
Feb 03 11:47:03 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:03 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:03 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:03 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:03 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:03 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:03 j10.gehrke.local systemd-logind[1123]: Watching system buttons on /dev/input/event4 (Microsoft Express Mouse)
Feb 03 11:47:03 j10.gehrke.local dbus-daemon[1124]: [system] Rejected send message, 0 matched rules; type="error", sender=":1.1" (uid=0 pid=1123 comm="/usr/lib/systemd/systemd-logind " label="system_u:system_r:systemd_logind_t:s0") interface="(unset)" member="(unset)" error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply="0" destination=":1.2986" (uid=1000 pid=21023 comm="/usr/bin/gnome-shell " label="unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023")
Feb 03 11:47:04 j10.gehrke.local kernel: scsi 4:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Feb 03 11:47:04 j10.gehrke.local kernel: scsi 4:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Feb 03 11:47:04 j10.gehrke.local kernel: scsi 4:0:0:2: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
Feb 03 11:47:04 j10.gehrke.local kernel: sd 4:0:0:0: Attached scsi generic sg1 type 0
Feb 03 11:47:04 j10.gehrke.local kernel: sd 4:0:0:1: Attached scsi generic sg2 type 0
Feb 03 11:47:04 j10.gehrke.local kernel: sd 4:0:0:2: Attached scsi generic sg3 type 0
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local kernel: sd 4:0:0:1: [sdc] Attached SCSI removable disk
Feb 03 11:47:04 j10.gehrke.local kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Feb 03 11:47:04 j10.gehrke.local kernel: sd 4:0:0:2: [sdd] Attached SCSI removable disk
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[2591]: QObject::connect: invalid null parameter
Feb 03 11:47:04 j10.gehrke.local baloo_file.desktop[21432]: QObject::connect: invalid null parameter
Code:
[root@j10 ~]# lsusb -vd 1f85:6053
Bus 002 Device 022: ID 1f85:6053
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1f85
idProduct 0x6053
bcdDevice 99.99
iManufacturer 2 Telekom
iProduct 3 tolino
iSerial <xxx>
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 1 Mass Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Was könnte das sein?
TNX
Glückauf, gehrke