• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Leap 42.2 keine Netzwerkverbindung

Sauerland

Ultimate Guru
Hier einmal ein Bild:
YaST2_187.jpg


Und damit keiner auf dumme Gedanken kommt, Repos verpixelt........
 

Sauerland

Ultimate Guru
Auswahl_188.jpg

Da siehst du doch, aus welchem Repo installiert ist..........

Du kannst auch noch die Versionen vergleichen........
 
OP
B

bayernherz

Hacker
hallo Sauerland,

Sauerland hat geschrieben
Da siehst du doch, aus welchem Repo installiert ist..........

Du kannst auch noch die Versionen vergleichen........
Entschuldigung, ich habe nur auf die Häckchen geschaut und das war ein Trugschluss.
Code:
zypper se -sir http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2
Loading repository data...
Reading installed packages...

S | Name                     | Type    | Version                | Arch   | Repository
--+--------------------------+---------+------------------------+--------+-----------
i | sane-backends            | package | 1.0.25.git20170403-3.1 | x86_64 | Sauerland 
i | sane-backends-autoconfig | package | 1.0.25.git20170403-3.1 | x86_64 | Sauerland

Die Umstellung von wicked Dienst auf Netzwerkmanager kann ich ja jetzt einfach in
Yast, Netzwerkeinstellung, Globale Optionen vornehmen.
Allerdings muss ich dann noch die manuellen IP's im Netzwerkmanager einstellen.
Da kenne ich mich aus.

Da sage ich vielen vielen Dank für Deine hilfreiche Unterstützung.

viele grüsse aus dem nächtlichen Oberbayern
vom bayernherz :thumbs:
 
OP
B

bayernherz

Hacker
hallo community,
bayernherz hat geschrieben:
Die Umstellung von wicked Dienst auf Netzwerkmanager kann ich ja jetzt einfach in
Yast, Netzwerkeinstellung, Globale Optionen vornehmen.
Das hat so funktioniert. :p

Und Dir Sauerland nochmals vielen vielen Dank für Deine aktive Unterstützung
zum Thema Leap 42.2 keine Netzwerkverbindung. :p :p

viele grüsse aus dem morgendlichen Oberbayern
vom bayernherz :thumbs:
 

Sauerland

Ultimate Guru
Und noch eine Frage:
Hast du ein Broadcom-Wlan?
Da du ja broadcom-wl installiert hast.
Aber das funktioniert nur mit Kernel 4.4 aus dem OSS Repo, nicht mit Kernel 4.10 aus dem kernel:stable Repo.

Wenn du das brauchst, hab ich da was.
 
OP
B

bayernherz

Hacker
hallo community,

Sauerland hat geschrieben:
Und noch eine Frage:
Hast du ein Broadcom-Wlan?
Was ist ein Broadcom-Wlan? :???:
Poste mir mal einen Link, vielleich habe ich etwas, was ich noch nicht entdeckt habe, aber gut brauchen könnte.
Das ACER Notebook ist ja brandneu.

Würde mich über einen Link um Thema Broadcom-Wlan freuen. :p :p

viele grüsse aus em morgentlichen Oberbayern
vom bayernherz :thumbs:
 

Sauerland

Ultimate Guru
Broadcom ist ein Hersteller von Chips, z.B. Wlan (Wireless Lan) Chips. Diese werden in USB-Wlan bzw. PCI Wlan Karten verbaut.
Diese Chips funktionieren teilweise mit den normalen Kernel Modulen, teilweise muss man dafür aber ein separates Paket installieren, welches Du installiert hast.

Beispiel:
Code:
/sbin/lspci -nnk | grep -iA3 broadcom
05:00.0 Network controller [0280]: Broadcom Corporation BCM4352 802.11ac Wireless Network Adapter [14e4:43b1] (rev 03)
        Subsystem: ASUSTeK Computer Inc. Device [1043:85ba]
        Kernel driver in use: wl
        Kernel modules: bcma, wl
Wie man hier sieht, wird dieser Chip angeblich von 2 Modulen unterstützt:
Code:
Kernel modules: bcma, wl
bcma ist das vom kernel mitgelieferte Modul
wl ist das Modul aus broadcom-wl-kmp-default.
Benutzt wird aber nur broadcom-wl-kmp-default:
Code:
Kernel driver in use: wl
Also kann ich das broadcom-wl und broadcom-wl-kmp-default installiert lassen.

Lt. der Ausgabe von collectNwData hast du kein Broadcom Chip verbaut, daher könntest du die Pakete broadcom-wl und broadcom-wl-kmp-default löschen.




Poste mir mal einen Link, vielleich habe ich etwas, was ich noch nicht entdeckt habe, aber gut brauchen könnte.

Das solltest du dir schnellsten abgewöhnen, never change a running System.......
Deswegen brauchst du auch nicht das KF5-Framework Repo.
Denn dann ist das Geheule wieder groß.
 
OP
B

bayernherz

Hacker
hallo community,

Sauerland hat geschrieben:
bayernherz hat geschrieben:
Poste mir mal einen Link, vielleich habe ich etwas, was ich noch nicht entdeckt habe, aber gut brauchen könnte.
Das solltest du dir schnellsten abgewöhnen, never change a running System.......
Deswegen brauchst du auch nicht das KF5-Framework Repo.
Denn dann ist das Geheule wieder groß.
Das hasst Du falsh verstanden, ich meinte einen Wikipedia Link zum schlaumachen, was sich hinter dem Begriff Broadcom verbirgt. :p
Habe heute ein
Code:
zypper update
durchgeführt.

Code:
Tux-ACER:~ # zypper update
Retrieving repository 'Sauerland' metadata ...............................................................................................[done]
Building repository 'Sauerland' cache ....................................................................................................[done]
Loading repository data...
Reading installed packages...

The following 43 package updates will NOT be installed:
  boost-devel broadcom-wl ffmpeg gimp gimp-help-browser gimp-lang gimp-plugins-python hplip-hpijs hplip-sane kernel-firmware kio_audiocd lcms2
  libFLAC++6 libFLAC8 libXss1 libavcodec57 libavdevice57 libavfilter6 libavformat57 libavresample3 libavutil55 libbabl-0_1-0 libdbusmenu-qt5-2
  libgimp-2_0-0 libgimpui-2_0-0 liblcms2-2 libpng16-16 libpng16-compat-devel libpng16-devel libpostproc54 libsoxr0 libswresample2 libswscale4
  libva-drm1 libva-x11-1 libva1 libxkbcommon-x11-0 libxkbcommon0 lua pthread-stubs-devel ucode-amd ucode-intel vaapi-dummy-driver

The following 4 NEW packages are going to be installed:
  broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1 kernel-default-4.10.8-4.1.geb4ae7d r8168 r8168-kmp-default

The following 6 applications are going to be REMOVED:
  Akregator KAddressBook KMail KNotes KOrganizer Kontact

The following 86 packages are going to be upgraded:
  akonadi_resources akregator5 alsa ffmpeg gstreamer-0_10-plugins-bad handbrake-cli handbrake-gtk handbrake-gtk-lang kaddressbook5 kdepim
  kernel-firmware kmail5 knotes5 kontact5 korganizer5 libasound2 libavcodec57 libavdevice57 libavfilter6 libavformat57 libavresample3
  libavutil55 libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libgstbasecamerabinsrc-0_10-23 libgstbasevideo-0_10-23
  libgstcodecparsers-0_10-23 libgstphotography-0_10-23 libgstsignalprocessor-0_10-23 libgstvdp-0_10-23 libndr-krb5pac0 libndr-krb5pac0-32bit
  libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr0 libndr0-32bit libnetapi0 libnetapi0-32bit libpng16-16
  libpng16-compat-devel libpng16-devel libpostproc54 libsamba-credentials0 libsamba-credentials0-32bit libsamba-errors0 libsamba-errors0-32bit
  libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-util0 libsamba-util0-32bit libsamdb0
  libsamdb0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap0 libsmbldap0-32bit libsolv-tools libswresample2 libswscale4
  libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit libzypp messagelib python-solv samba samba-client samba-client-32bit
  samba-libs samba-libs-32bit samba-winbind samba-winbind-32bit ucode-amd x264 xine-ui zypper zypper-aptitude zypper-log

86 packages to upgrade, 4 new.
Overall download size: 152.1 MiB. Already cached: 0 B. After the operation, additional 290.4 MiB will be used.
Continue? [y/n/? shows all options] (y): y





Retrieving package r8168-8.044.02-4.1.x86_64                                                              (1/90),   3.7 KiB (   45   B unpacked)
Retrieving: r8168-8.044.02-4.1.x86_64.rpm ................................................................................................[done]
Retrieving package kernel-default-4.10.8-4.1.geb4ae7d.x86_64                                              (2/90),  56.1 MiB (257.5 MiB unpacked)
Retrieving: kernel-default-4.10.8-4.1.geb4ae7d.x86_64.rpm ....................................................................[done (5.5 MiB/s)]
Retrieving package kernel-firmware-20170404-35.1.noarch                                                   (3/90),  41.5 MiB (187.8 MiB unpacked)
Retrieving: kernel-firmware-20170404-35.1.noarch.rpm .........................................................................[done (5.0 MiB/s)]
Retrieving package ucode-amd-20170404-35.1.noarch                                                         (4/90),  54.8 KiB ( 28.6 KiB unpacked)
Retrieving: ucode-amd-20170404-35.1.noarch.rpm ...........................................................................................[done]
Retrieving package libavutil55-3.2.4-6.5.1.x86_64                                                         (5/90), 170.4 KiB (387.0 KiB unpacked)
Retrieving: libavutil55-3.2.4-6.5.1.x86_64.rpm ...........................................................................................[done]
Retrieving package libgstcodecparsers-0_10-23-0.10.23-29.15.2.x86_64                                      (6/90), 102.0 KiB (154.3 KiB unpacked)
Retrieving: libgstcodecparsers-0_10-23-0.10.23-29.15.2.x86_64.rpm ........................................................................[done]
Retrieving package libgstbasecamerabinsrc-0_10-23-0.10.23-29.15.2.x86_64                                  (7/90),  55.6 KiB ( 27.2 KiB unpacked)
Retrieving: libgstbasecamerabinsrc-0_10-23-0.10.23-29.15.2.x86_64.rpm ....................................................................[done]
Retrieving package libgstbasevideo-0_10-23-0.10.23-29.15.2.x86_64                                         (8/90),  72.4 KiB ( 79.4 KiB unpacked)
Retrieving: libgstbasevideo-0_10-23-0.10.23-29.15.2.x86_64.rpm ...........................................................................[done]
Retrieving package libgstsignalprocessor-0_10-23-0.10.23-29.15.2.x86_64                                   (9/90),  55.5 KiB ( 22.5 KiB unpacked)
Retrieving: libgstsignalprocessor-0_10-23-0.10.23-29.15.2.x86_64.rpm .....................................................................[done]
Retrieving package libgstphotography-0_10-23-0.10.23-29.15.2.x86_64                                      (10/90),  53.6 KiB ( 30.3 KiB unpacked)
Retrieving: libgstphotography-0_10-23-0.10.23-29.15.2.x86_64.rpm .........................................................................[done]
Retrieving package libgstvdp-0_10-23-0.10.23-29.15.2.x86_64                                              (11/90),  72.5 KiB ( 84.3 KiB unpacked)
Retrieving: libgstvdp-0_10-23-0.10.23-29.15.2.x86_64.rpm .................................................................................[done]
Retrieving package libavresample3-3.2.4-6.5.1.x86_64                                                     (12/90),  66.0 KiB (122.5 KiB unpacked)
Retrieving: libavresample3-3.2.4-6.5.1.x86_64.rpm ........................................................................................[done]
Retrieving package libswscale4-3.2.4-6.5.1.x86_64                                                        (13/90), 154.1 KiB (506.4 KiB unpacked)
Retrieving: libswscale4-3.2.4-6.5.1.x86_64.rpm ...........................................................................................[done]
Retrieving package libswresample2-3.2.4-6.5.1.x86_64                                                     (14/90),  66.9 KiB (110.5 KiB unpacked)
Retrieving: libswresample2-3.2.4-6.5.1.x86_64.rpm ........................................................................................[done]
Retrieving package libpostproc54-3.2.4-6.5.1.x86_64                                                      (15/90),  67.3 KiB (118.3 KiB unpacked)
Retrieving: libpostproc54-3.2.4-6.5.1.x86_64.rpm .........................................................................................[done]
Retrieving package libavcodec57-3.2.4-6.5.1.x86_64                                                       (16/90),   3.7 MiB ( 10.6 MiB unpacked)
Retrieving: libavcodec57-3.2.4-6.5.1.x86_64.rpm ............................................................................[done (921.4 KiB/s)]
Retrieving package libavformat57-3.2.4-6.5.1.x86_64                                                      (17/90), 804.7 KiB (  2.0 MiB unpacked)
Retrieving: libavformat57-3.2.4-6.5.1.x86_64.rpm .........................................................................................[done]
Retrieving package libavfilter6-3.2.4-6.5.1.x86_64                                                       (18/90), 689.6 KiB (  2.1 MiB unpacked)
Retrieving: libavfilter6-3.2.4-6.5.1.x86_64.rpm ..........................................................................................[done]
Retrieving package x264-0.148svn20161219-6.3.x86_64                                                      (19/90),  63.3 KiB (153.0 KiB unpacked)
Retrieving: x264-0.148svn20161219-6.3.x86_64.rpm .........................................................................................[done]
Retrieving package handbrake-cli-1.0.3-2.10.x86_64                                                       (20/90), 415.8 KiB (  1.4 MiB unpacked)
Retrieving: handbrake-cli-1.0.3-2.10.x86_64.rpm ..........................................................................................[done]
Retrieving package handbrake-gtk-1.0.3-2.10.x86_64                                                       (21/90),   2.8 MiB (  8.8 MiB unpacked)
Retrieving: handbrake-gtk-1.0.3-2.10.x86_64.rpm ............................................................................[done (721.8 KiB/s)]
Retrieving package handbrake-gtk-lang-1.0.3-2.10.noarch                                                  (22/90), 116.9 KiB (529.4 KiB unpacked)
Retrieving: handbrake-gtk-lang-1.0.3-2.10.noarch.rpm .....................................................................................[done]
Retrieving package kaddressbook5-16.08.2-2.2.1.x86_64                                                   (23/90), 290.8 KiB (1008.8 KiB unpacked)
Retrieving delta: ./x86_64/kaddressbook5-16.08.2-1.1_2.2.1.x86_64.drpm, 20.0 KiB
Retrieving: kaddressbook5-16.08.2-1.1_2.2.1.x86_64.drpm ..................................................................................[done]
Applying delta: ./kaddressbook5-16.08.2-1.1_2.2.1.x86_64.drpm ............................................................................[done]
Retrieving package knotes5-16.08.2-2.2.1.x86_64                                                          (24/90), 361.1 KiB (  1.4 MiB unpacked)
Retrieving delta: ./x86_64/knotes5-16.08.2-1.1_2.2.1.x86_64.drpm, 21.7 KiB
Retrieving: knotes5-16.08.2-1.1_2.2.1.x86_64.drpm ........................................................................................[done]
Applying delta: ./knotes5-16.08.2-1.1_2.2.1.x86_64.drpm ..................................................................................[done]
Retrieving package kontact5-16.08.2-2.2.1.x86_64                                                         (25/90), 832.9 KiB (  1.1 MiB unpacked)
Retrieving delta: ./x86_64/kontact5-16.08.2-1.1_2.2.1.x86_64.drpm, 30.5 KiB
Retrieving: kontact5-16.08.2-1.1_2.2.1.x86_64.drpm .......................................................................................[done]
Applying delta: ./kontact5-16.08.2-1.1_2.2.1.x86_64.drpm .................................................................................[done]
Retrieving package korganizer5-16.08.2-2.2.1.x86_64                                                      (26/90),   1.3 MiB (  4.1 MiB unpacked)
Retrieving delta: ./x86_64/korganizer5-16.08.2-1.1_2.2.1.x86_64.drpm, 73.6 KiB
Retrieving: korganizer5-16.08.2-1.1_2.2.1.x86_64.drpm ......................................................................[done (763.2 KiB/s)]
Applying delta: ./korganizer5-16.08.2-1.1_2.2.1.x86_64.drpm ..............................................................................[done]
Retrieving package libpng16-16-1.6.8-9.3.1.x86_64                                                        (27/90), 121.0 KiB (242.0 KiB unpacked)
Retrieving delta: ./x86_64/libpng16-16-1.6.8-8.1_9.3.1.x86_64.drpm, 25.0 KiB
Retrieving: libpng16-16-1.6.8-8.1_9.3.1.x86_64.drpm ......................................................................................[done]
Applying delta: ./libpng16-16-1.6.8-8.1_9.3.1.x86_64.drpm ................................................................................[done]
Retrieving package libsamba-errors0-4.4.2-11.3.1.x86_64                                                  (28/90), 421.4 KiB (  1.3 MiB unpacked)
Retrieving delta: ./x86_64/libsamba-errors0-4.4.2-9.1_11.3.1.x86_64.drpm, 210.6 KiB
Retrieving: libsamba-errors0-4.4.2-9.1_11.3.1.x86_64.drpm ................................................................................[done]
Applying delta: ./libsamba-errors0-4.4.2-9.1_11.3.1.x86_64.drpm ..........................................................................[done]
Retrieving package libsamba-errors0-32bit-4.4.2-11.3.1.x86_64                                            (29/90), 392.7 KiB (933.4 KiB unpacked)
Retrieving: libsamba-errors0-32bit-4.4.2-11.3.1.x86_64.rpm ...............................................................................[done]
Retrieving package libsolv-tools-0.6.26-5.3.1.x86_64                                                     (30/90), 527.8 KiB (  4.3 MiB unpacked)
Retrieving delta: ./x86_64/libsolv-tools-0.6.24_0.6.26-3.1_5.3.1.x86_64.drpm, 225.8 KiB
Retrieving: libsolv-tools-0.6.24_0.6.26-3.1_5.3.1.x86_64.drpm ............................................................................[done]
Applying delta: ./libsolv-tools-0.6.24_0.6.26-3.1_5.3.1.x86_64.drpm ......................................................................[done]
Retrieving package messagelib-16.08.2-2.3.1.x86_64                                                       (31/90),   4.9 MiB (  8.4 MiB unpacked)
Retrieving delta: ./x86_64/messagelib-16.08.2-1.1_2.3.1.x86_64.drpm, 97.1 KiB
Retrieving: messagelib-16.08.2-1.1_2.3.1.x86_64.drpm .....................................................................................[done]
Applying delta: ./messagelib-16.08.2-1.1_2.3.1.x86_64.drpm ...............................................................................[done]
Retrieving package python-solv-0.6.26-5.3.1.x86_64                                                       (32/90), 427.8 KiB (  1.3 MiB unpacked)
Retrieving delta: ./x86_64/python-solv-0.6.24_0.6.26-3.1_5.3.1.x86_64.drpm, 142.9 KiB
Retrieving: python-solv-0.6.24_0.6.26-3.1_5.3.1.x86_64.drpm ..............................................................................[done]
Applying delta: ./python-solv-0.6.24_0.6.26-3.1_5.3.1.x86_64.drpm ........................................................................[done]
Retrieving package zypper-log-1.13.21-5.3.1.noarch                                                       (33/90),  58.6 KiB (  6.2 KiB unpacked)
Retrieving: zypper-log-1.13.21-5.3.1.noarch.rpm ..............................................................................[done (1.2 MiB/s)]
Retrieving package alsa-1.1.3-8.3.1.x86_64                                                               (34/90),   1.1 MiB (  1.3 MiB unpacked)
Retrieving delta: ./x86_64/alsa-1.1.3-6.1_8.3.1.x86_64.drpm, 57.1 KiB
Retrieving: alsa-1.1.3-6.1_8.3.1.x86_64.drpm .............................................................................................[done]
Applying delta: ./alsa-1.1.3-6.1_8.3.1.x86_64.drpm .......................................................................................[done]
Retrieving package libasound2-1.1.3-8.3.1.x86_64                                                         (35/90), 404.2 KiB (  1.3 MiB unpacked)
Retrieving delta: ./x86_64/libasound2-1.1.3-6.1_8.3.1.x86_64.drpm, 155.1 KiB
Retrieving: libasound2-1.1.3-6.1_8.3.1.x86_64.drpm .......................................................................................[done]
Applying delta: ./libasound2-1.1.3-6.1_8.3.1.x86_64.drpm .................................................................................[done]
Retrieving package libpng16-devel-1.6.8-9.3.1.x86_64                                                     (36/90), 176.1 KiB (646.5 KiB unpacked)
Retrieving delta: ./x86_64/libpng16-devel-1.6.8-8.1_9.3.1.x86_64.drpm, 23.1 KiB
Retrieving: libpng16-devel-1.6.8-8.1_9.3.1.x86_64.drpm ...................................................................................[done]
Applying delta: ./libpng16-devel-1.6.8-8.1_9.3.1.x86_64.drpm .............................................................................[done]
Retrieving package libtevent-util0-4.4.2-11.3.1.x86_64                                                   (37/90), 213.1 KiB ( 10.0 KiB unpacked)
Retrieving: libtevent-util0-4.4.2-11.3.1.x86_64.rpm ......................................................................................[done]
Retrieving package libtevent-util0-32bit-4.4.2-11.3.1.x86_64                                             (38/90), 213.3 KiB (  9.3 KiB unpacked)
Retrieving: libtevent-util0-32bit-4.4.2-11.3.1.x86_64.rpm ................................................................................[done]
Retrieving package libzypp-16.5.2-5.3.1.x86_64                                                           (39/90),   2.0 MiB (  7.3 MiB unpacked)
Retrieving delta: ./x86_64/libzypp-16.3.2_16.5.2-3.1_5.3.1.x86_64.drpm, 492.8 KiB
Retrieving: libzypp-16.3.2_16.5.2-3.1_5.3.1.x86_64.drpm ..................................................................................[done]
Applying delta: ./libzypp-16.3.2_16.5.2-3.1_5.3.1.x86_64.drpm ............................................................................[done]
Retrieving package akregator5-16.08.2-2.2.1.x86_64                                                       (40/90),   1.4 MiB (  3.2 MiB unpacked)
Retrieving delta: ./x86_64/akregator5-16.08.2-1.1_2.2.1.x86_64.drpm, 47.6 KiB
Retrieving: akregator5-16.08.2-1.1_2.2.1.x86_64.drpm .....................................................................................[done]
Applying delta: ./akregator5-16.08.2-1.1_2.2.1.x86_64.drpm ...............................................................................[done]
Retrieving package akonadi_resources-16.08.2-2.2.1.x86_64                                                (41/90), 514.3 KiB (  1.7 MiB unpacked)
Retrieving delta: ./x86_64/akonadi_resources-16.08.2-1.1_2.2.1.x86_64.drpm, 22.0 KiB
Retrieving: akonadi_resources-16.08.2-1.1_2.2.1.x86_64.drpm ..............................................................................[done]
Applying delta: ./akonadi_resources-16.08.2-1.1_2.2.1.x86_64.drpm ........................................................................[done]
Retrieving package libpng16-compat-devel-1.6.8-9.3.1.x86_64                                              (42/90), 100.7 KiB ( 77.5 KiB unpacked)
Retrieving delta: ./x86_64/libpng16-compat-devel-1.6.8-8.1_9.3.1.x86_64.drpm, 22.5 KiB
Retrieving: libpng16-compat-devel-1.6.8-8.1_9.3.1.x86_64.drpm ............................................................................[done]
Applying delta: ./libpng16-compat-devel-1.6.8-8.1_9.3.1.x86_64.drpm ......................................................................[done]
Retrieving package libdcerpc-binding0-4.4.2-11.3.1.x86_64                                                (43/90), 244.3 KiB (126.0 KiB unpacked)
Retrieving: libdcerpc-binding0-4.4.2-11.3.1.x86_64.rpm ...................................................................................[done]
Retrieving package libndr0-32bit-4.4.2-11.3.1.x86_64                                                     (44/90), 239.8 KiB ( 89.4 KiB unpacked)
Retrieving: libndr0-32bit-4.4.2-11.3.1.x86_64.rpm ........................................................................................[done]
Retrieving package zypper-1.13.21-5.3.1.x86_64                                                           (45/90),   1.2 MiB (  6.4 MiB unpacked)
Retrieving delta: ./x86_64/zypper-1.13.14_1.13.21-3.1_5.3.1.x86_64.drpm, 415.5 KiB
Retrieving: zypper-1.13.14_1.13.21-3.1_5.3.1.x86_64.drpm .................................................................................[done]
Applying delta: ./zypper-1.13.14_1.13.21-3.1_5.3.1.x86_64.drpm ...........................................................................[done]
Retrieving package kdepim-16.08.2-2.2.1.x86_64                                                           (46/90),   1.5 MiB (  5.1 MiB unpacked)
Retrieving delta: ./x86_64/kdepim-16.08.2-1.1_2.2.1.x86_64.drpm, 56.0 KiB
Retrieving: kdepim-16.08.2-1.1_2.2.1.x86_64.drpm .........................................................................................[done]
Applying delta: ./kdepim-16.08.2-1.1_2.2.1.x86_64.drpm ...................................................................................[done]
Retrieving package samba-libs-4.4.2-11.3.1.x86_64                                                        (47/90),   3.0 MiB ( 12.0 MiB unpacked)
Retrieving delta: ./x86_64/samba-libs-4.4.2-9.1_11.3.1.x86_64.drpm, 748.6 KiB
Retrieving: samba-libs-4.4.2-9.1_11.3.1.x86_64.drpm ......................................................................................[done]
Applying delta: ./samba-libs-4.4.2-9.1_11.3.1.x86_64.drpm ................................................................................[done]
Retrieving package libdcerpc-binding0-32bit-4.4.2-11.3.1.x86_64                                          (48/90), 246.2 KiB (125.4 KiB unpacked)
Retrieving: libdcerpc-binding0-32bit-4.4.2-11.3.1.x86_64.rpm .............................................................................[done]
Retrieving package zypper-aptitude-1.13.21-5.3.1.noarch                                                  (49/90),  58.0 KiB (  4.0 KiB unpacked)
Retrieving: zypper-aptitude-1.13.21-5.3.1.noarch.rpm .....................................................................................[done]
Retrieving package kmail5-16.08.2-2.2.1.x86_64                                                           (50/90),   1.9 MiB (  5.2 MiB unpacked)
Retrieving delta: ./x86_64/kmail5-16.08.2-1.1_2.2.1.x86_64.drpm, 108.3 KiB
Retrieving: kmail5-16.08.2-1.1_2.2.1.x86_64.drpm .........................................................................................[done]
Applying delta: ./kmail5-16.08.2-1.1_2.2.1.x86_64.drpm ...................................................................................[done]
Retrieving package libsamba-util0-4.4.2-11.3.1.x86_64                                                    (51/90), 371.4 KiB (474.4 KiB unpacked)
Retrieving: libsamba-util0-4.4.2-11.3.1.x86_64.rpm .......................................................................................[done]
Retrieving package samba-libs-32bit-4.4.2-11.3.1.x86_64                                                  (52/90),   3.0 MiB ( 12.0 MiB unpacked)
Retrieving delta: ./x86_64/samba-libs-32bit-4.4.2-9.1_11.3.1.x86_64.drpm, 701.6 KiB
Retrieving: samba-libs-32bit-4.4.2-9.1_11.3.1.x86_64.drpm ....................................................................[done (4.1 MiB/s)]
Applying delta: ./samba-libs-32bit-4.4.2-9.1_11.3.1.x86_64.drpm ..........................................................................[done]
Retrieving package libndr0-4.4.2-11.3.1.x86_64                                                           (53/90), 237.9 KiB ( 86.0 KiB unpacked)
Retrieving: libndr0-4.4.2-11.3.1.x86_64.rpm ..............................................................................................[done]
Retrieving package libsamba-util0-32bit-4.4.2-11.3.1.x86_64                                              (54/90), 374.5 KiB (473.6 KiB unpacked)
Retrieving: libsamba-util0-32bit-4.4.2-11.3.1.x86_64.rpm .................................................................................[done]
Retrieving package libndr-standard0-4.4.2-11.3.1.x86_64                                                  (55/90), 850.4 KiB (  3.1 MiB unpacked)
Retrieving delta: ./x86_64/libndr-standard0-4.4.2-9.1_11.3.1.x86_64.drpm, 306.1 KiB
Retrieving: libndr-standard0-4.4.2-9.1_11.3.1.x86_64.drpm ....................................................................[done (3.0 MiB/s)]
Applying delta: ./libndr-standard0-4.4.2-9.1_11.3.1.x86_64.drpm ..........................................................................[done]
Retrieving package libndr-nbt0-32bit-4.4.2-11.3.1.x86_64                                                 (56/90), 235.2 KiB ( 89.4 KiB unpacked)
Retrieving: libndr-nbt0-32bit-4.4.2-11.3.1.x86_64.rpm ....................................................................................[done]
Retrieving package libsamba-hostconfig0-4.4.2-11.3.1.x86_64                                              (57/90), 251.1 KiB (171.7 KiB unpacked)
Retrieving: libsamba-hostconfig0-4.4.2-11.3.1.x86_64.rpm .................................................................................[done]
Retrieving package libndr-standard0-32bit-4.4.2-11.3.1.x86_64                                            (58/90), 811.9 KiB (  3.2 MiB unpacked)
Retrieving delta: ./x86_64/libndr-standard0-32bit-4.4.2-9.1_11.3.1.x86_64.drpm, 300.7 KiB
Retrieving: libndr-standard0-32bit-4.4.2-9.1_11.3.1.x86_64.drpm ..........................................................................[done]
Applying delta: ./libndr-standard0-32bit-4.4.2-9.1_11.3.1.x86_64.drpm ....................................................................[done]
Retrieving package libsmbconf0-4.4.2-11.3.1.x86_64                                                       (59/90), 349.8 KiB (431.6 KiB unpacked)
Retrieving: libsmbconf0-4.4.2-11.3.1.x86_64.rpm ..........................................................................................[done]
Retrieving package libsamba-hostconfig0-32bit-4.4.2-11.3.1.x86_64                                        (60/90), 250.7 KiB (149.9 KiB unpacked)
Retrieving: libsamba-hostconfig0-32bit-4.4.2-11.3.1.x86_64.rpm ...........................................................................[done]
Retrieving package libsamba-credentials0-4.4.2-11.3.1.x86_64                                             (61/90), 233.8 KiB ( 70.0 KiB unpacked)
Retrieving: libsamba-credentials0-4.4.2-11.3.1.x86_64.rpm ................................................................................[done]
Retrieving package libsamba-credentials0-32bit-4.4.2-11.3.1.x86_64                                       (62/90), 234.1 KiB ( 69.3 KiB unpacked)
Retrieving: libsamba-credentials0-32bit-4.4.2-11.3.1.x86_64.rpm ..........................................................................[done]
Retrieving package libwbclient0-4.4.2-11.3.1.x86_64                                                      (63/90), 228.4 KiB ( 54.0 KiB unpacked)
Retrieving: libwbclient0-4.4.2-11.3.1.x86_64.rpm .........................................................................................[done]
Retrieving package libdcerpc0-32bit-4.4.2-11.3.1.x86_64                                                  (64/90), 270.8 KiB (201.4 KiB unpacked)
Retrieving: libdcerpc0-32bit-4.4.2-11.3.1.x86_64.rpm .....................................................................................[done]
Retrieving package libsamba-passdb0-4.4.2-11.3.1.x86_64                                                  (65/90), 276.2 KiB (214.0 KiB unpacked)
Retrieving: libsamba-passdb0-4.4.2-11.3.1.x86_64.rpm .....................................................................................[done]
Retrieving package libndr-krb5pac0-32bit-4.4.2-11.3.1.x86_64                                             (66/90), 220.9 KiB ( 37.4 KiB unpacked)
Retrieving: libndr-krb5pac0-32bit-4.4.2-11.3.1.x86_64.rpm ................................................................................[done]
Retrieving package libndr-nbt0-4.4.2-11.3.1.x86_64                                                       (67/90), 234.6 KiB ( 86.0 KiB unpacked)
Retrieving: libndr-nbt0-4.4.2-11.3.1.x86_64.rpm ..........................................................................................[done]
Retrieving package libsmbconf0-32bit-4.4.2-11.3.1.x86_64                                                 (68/90), 353.5 KiB (430.4 KiB unpacked)
Retrieving: libsmbconf0-32bit-4.4.2-11.3.1.x86_64.rpm ........................................................................[done (3.6 MiB/s)]
Retrieving package libsmbldap0-4.4.2-11.3.1.x86_64                                                       (69/90), 223.6 KiB ( 42.0 KiB unpacked)
Retrieving: libsmbldap0-4.4.2-11.3.1.x86_64.rpm ..........................................................................................[done]
Retrieving package libwbclient0-32bit-4.4.2-11.3.1.x86_64                                                (70/90), 229.0 KiB ( 53.3 KiB unpacked)
Retrieving: libwbclient0-32bit-4.4.2-11.3.1.x86_64.rpm ...................................................................................[done]
Retrieving package libndr-krb5pac0-4.4.2-11.3.1.x86_64                                                   (71/90), 220.8 KiB ( 38.0 KiB unpacked)
Retrieving: libndr-krb5pac0-4.4.2-11.3.1.x86_64.rpm ......................................................................................[done]
Retrieving package libsamba-passdb0-32bit-4.4.2-11.3.1.x86_64                                            (72/90), 276.8 KiB (213.4 KiB unpacked)
Retrieving: libsamba-passdb0-32bit-4.4.2-11.3.1.x86_64.rpm ...............................................................................[done]
Retrieving package libnetapi0-4.4.2-11.3.1.x86_64                                                        (73/90), 304.5 KiB (406.0 KiB unpacked)
Retrieving: libnetapi0-4.4.2-11.3.1.x86_64.rpm ...........................................................................................[done]
Retrieving package libnetapi0-32bit-4.4.2-11.3.1.x86_64                                                  (74/90), 307.8 KiB (445.3 KiB unpacked)
Retrieving: libnetapi0-32bit-4.4.2-11.3.1.x86_64.rpm .....................................................................................[done]
Retrieving package libsamdb0-4.4.2-11.3.1.x86_64                                                         (75/90), 239.9 KiB ( 90.6 KiB unpacked)
Retrieving: libsamdb0-4.4.2-11.3.1.x86_64.rpm ................................................................................[done (3.8 MiB/s)]
Retrieving package libsamdb0-32bit-4.4.2-11.3.1.x86_64                                                   (76/90), 239.4 KiB ( 85.7 KiB unpacked)
Retrieving: libsamdb0-32bit-4.4.2-11.3.1.x86_64.rpm ......................................................................................[done]
Retrieving package libdcerpc0-4.4.2-11.3.1.x86_64                                                        (77/90), 268.6 KiB (202.0 KiB unpacked)
Retrieving: libdcerpc0-4.4.2-11.3.1.x86_64.rpm ...........................................................................................[done]
Retrieving package libsmbldap0-32bit-4.4.2-11.3.1.x86_64                                                 (78/90), 223.9 KiB ( 41.3 KiB unpacked)
Retrieving: libsmbldap0-32bit-4.4.2-11.3.1.x86_64.rpm ....................................................................................[done]
Retrieving package libsmbclient0-4.4.2-11.3.1.x86_64                                                     (79/90), 258.5 KiB (154.0 KiB unpacked)
Retrieving: libsmbclient0-4.4.2-11.3.1.x86_64.rpm ........................................................................................[done]
Retrieving package samba-client-32bit-4.4.2-11.3.1.x86_64                                                (80/90), 213.2 KiB (  5.3 KiB unpacked)
Retrieving: samba-client-32bit-4.4.2-11.3.1.x86_64.rpm ...................................................................................[done]
Retrieving package samba-client-4.4.2-11.3.1.x86_64                                                      (81/90),   1.1 MiB (  3.1 MiB unpacked)
Retrieving delta: ./x86_64/samba-client-4.4.2-9.1_11.3.1.x86_64.drpm, 457.3 KiB
Retrieving: samba-client-4.4.2-9.1_11.3.1.x86_64.drpm ....................................................................................[done]
Applying delta: ./samba-client-4.4.2-9.1_11.3.1.x86_64.drpm ..............................................................................[done]
Retrieving package samba-winbind-32bit-4.4.2-11.3.1.x86_64                                               (82/90), 234.5 KiB ( 68.0 KiB unpacked)
Retrieving: samba-winbind-32bit-4.4.2-11.3.1.x86_64.rpm ..................................................................................[done]
Retrieving package samba-4.4.2-11.3.1.x86_64                                                             (83/90), 599.2 KiB (  1.3 MiB unpacked)
Retrieving: samba-4.4.2-11.3.1.x86_64.rpm ................................................................................................[done]
Retrieving package samba-winbind-4.4.2-11.3.1.x86_64                                                     (84/90), 650.6 KiB (  1.6 MiB unpacked)
Retrieving: samba-winbind-4.4.2-11.3.1.x86_64.rpm ........................................................................................[done]
Retrieving package r8168-kmp-default-8.044.02_k4.4.27_2-4.1.x86_64                                       (85/90), 542.4 KiB (  3.7 MiB unpacked)
Retrieving: r8168-kmp-default-8.044.02_k4.4.27_2-4.1.x86_64.rpm ..........................................................................[done]
Retrieving package broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1.x86_64                            (86/90),   1.7 MiB (  8.4 MiB unpacked)
Retrieving: broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1.x86_64.rpm .................................................[done (233.9 KiB/s)]
Retrieving package gstreamer-0_10-plugins-bad-0.10.23-29.15.2.x86_64                                     (87/90),   1.4 MiB (  5.0 MiB unpacked)
Retrieving: gstreamer-0_10-plugins-bad-0.10.23-29.15.2.x86_64.rpm ........................................................................[done]
Retrieving package xine-ui-0.99.9-50.56.x86_64                                                           (88/90),   1.6 MiB (  3.1 MiB unpacked)
Retrieving: xine-ui-0.99.9-50.56.x86_64.rpm ................................................................................[done (438.6 KiB/s)]
Retrieving package libavdevice57-3.2.4-6.5.1.x86_64                                                      (89/90),  72.8 KiB (128.0 KiB unpacked)
Retrieving: libavdevice57-3.2.4-6.5.1.x86_64.rpm .........................................................................................[done]
Retrieving package ffmpeg-3.2.4-6.5.1.x86_64                                                             (90/90),   1.5 MiB (  2.1 MiB unpacked)
Retrieving: ffmpeg-3.2.4-6.5.1.x86_64.rpm ..................................................................................[done (551.1 KiB/s)]
Checking for file conflicts: ............................................................................................................[error]
Detected 1 file conflict:





File /lib/modules/4.4.27-2-default/updates/wl.ko
  from install of
     broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1.x86_64 (Sauerland)
  conflicts with file from package
     broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-42.1.x86_64 (@System)

File conflicts happen when two packages attempt to install files with the same name but different contents. If you continue, conflicting files will be replaced losing the previous content.
Continue? [yes/no] (no): n



Problem occured during or after installation or removal of packages:
Installation aborted by user

Please see the above error message for a hint.
An den Problemstellen habe ich grössere Absätze eingefügt, so das Du diese sofort auffinden kannst.

Habe danach das Repository Sauer deaktiviert und
Code:
zypper update
wiederholt.
War das etwar wieder falsch ? :???:

viele grüsse aus dem abendliche Oberbayern
vom bayernherz :thumbs:
 

Sauerland

Ultimate Guru
Habe danach das Repository Sauer deaktiviert und
Bitte aktivieren, danach posten:
Code:
zypper se -sir http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2/

Mir schwant da schon wieder etwas:
The following 4 NEW packages are going to be installed:
broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1 kernel-default-4.10.8-4.1.geb4ae7d r8168 r8168-kmp-default

Wenn das Netzwerk wieder nicht geht:
https://linux-club.de/forum/viewtopic.php?f=86&t=121755#p779491
 
OP
B

bayernherz

Hacker
hallo community,
Sauerland hat geschrieben:
Bitte aktivieren, danach posten:
Code:
zypper se -sir http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2/
Code:
zypper se -sir http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2/
Loading repository data...
Reading installed packages...

S | Name                     | Type    | Version                | Arch   | Repository
--+--------------------------+---------+------------------------+--------+-----------
i | sane-backends            | package | 1.0.25.git20170403-3.1 | x86_64 | Sauerland 
i | sane-backends-autoconfig | package | 1.0.25.git20170403-3.1 | x86_64 | Sauerland
Netzwerk funktioniert auch nach einem reboot noch. :p :p

Code:
zypper update
Retrieving repository 'packman' metadata .................................................................................................[done]
Building repository 'packman' cache ......................................................................................................[done]
Retrieving repository 'openSUSE-Leap-42.2-Update' metadata ...............................................................................[done]
Building repository 'openSUSE-Leap-42.2-Update' cache ....................................................................................[done]
Loading repository data...
Reading installed packages...

The following 43 package updates will NOT be installed:
  boost-devel broadcom-wl ffmpeg gimp gimp-help-browser gimp-lang gimp-plugins-python hplip-hpijs hplip-sane kernel-firmware kio_audiocd lcms2
  libFLAC++6 libFLAC8 libXss1 libavcodec57 libavdevice57 libavfilter6 libavformat57 libavresample3 libavutil55 libbabl-0_1-0 libdbusmenu-qt5-2
  libgimp-2_0-0 libgimpui-2_0-0 liblcms2-2 libpng16-16 libpng16-compat-devel libpng16-devel libpostproc54 libsoxr0 libswresample2 libswscale4
  libva-drm1 libva-x11-1 libva1 libxkbcommon-x11-0 libxkbcommon0 lua pthread-stubs-devel ucode-amd ucode-intel vaapi-dummy-driver

The following 4 NEW packages are going to be installed:
  broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1 kernel-default-4.10.9-1.1.g195f937 r8168 r8168-kmp-default

The following 22 packages are going to be upgraded:
  apparmor-abstractions apparmor-docs apparmor-parser apparmor-profiles apparmor-utils handbrake-cli handbrake-gtk handbrake-gtk-lang
  libapparmor-devel libapparmor1 libpurple libpurple-branding-openSUSE libpurple-lang libpurple-tcl libxine2 libxine2-codecs libxine2-pulse
  perl-apparmor python3-apparmor telepathy-mission-control-plugin-goa xine-ui youtube-dl

22 packages to upgrade, 4 new.
Overall download size: 70.9 MiB. Already cached: 2.2 MiB. After the operation, additional 268.8 MiB will be used.
Continue? [y/n/...? shows all options] (y): n
Kann ich die Broadcom WLAN-Treiber gefahrenlos installieren, ohne das das Netzwerk wieder stehen bleibt.
Mein ACER-Notebook hat den Qualcomm WLAN-Chip
Code:
The following 4 NEW packages are going to be installed:
  broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1 kernel-default-4.10.9-1.1.g195f937 r8168 r8168-kmp-default

viele grüsse aus dem nachmittagliche Oberbayern
vom bayernherz :thumbs:
 

Sauerland

Ultimate Guru
Deaktiviere mein Repo vor dem Update,

Poste dann:
Code:
zypper lr -d

Broadcom-wl kannst du löschen.

Poste die Ausgabe von:
Code:
zypper se -si r8168 broadcom

Danach ein
Code:
zypper up
 
OP
B

bayernherz

Hacker
hallo community,
Code:
zypper lr -d
Repository priorities in effect:                                                                                (See 'zypper lr -P' for details)
      20 (raised priority)  :  2 repositories
      99 (default priority) :  6 repositories
     120 (lowered priority) :  1 repository  

#  | Alias                     | Name                                     | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                           | Service
---+---------------------------+------------------------------------------+---------+-----------+---------+----------+--------+-------------------------------------------------------------------------------+--------
 1 | Sauerland                 | Sauerland                                | Yes     | (r ) Yes  | Yes     |  120     | rpm-md | http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2/ |        
 2 | dvd                       | dvd                                      | Yes     | (r ) Yes  | Yes     |   20     | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_42.2/                            |        
 3 | home_luckyb69             | luckybackup-testing (openSUSE_Leap_42.2) | Yes     | (r ) Yes  | No      |   99     | rpm-md | http://download.opensuse.org/repositories/home:/luckyb69/openSUSE_Leap_42.2/  |        
 4 | kernel-stable             | kernel-stable                            | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/repositories/Kernel:/stable/standard/            |        
 5 | openSUSE-42.2-0           | openSUSE-42.2-0                          | No      | ----      | ----    |   99     | yast2  | hd:///?device=/dev/disk/by-id/scsi-0Generic_Flash_Disk_058F-part2             |        
 6 | packman                   | packman                                  | Yes     | (r ) Yes  | Yes     |   20     | rpm-md | http://packman.inode.at/suse/openSUSE_Leap_42.2/                              |        
 7 | repo-debug                | openSUSE-Leap-42.2-Debug                 | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distribution/leap/42.2/repo/oss/           |        
 8 | repo-debug-non-oss        | openSUSE-Leap-42.2-Debug-Non-Oss         | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distribution/leap/42.2/repo/non-oss/       |        
 9 | repo-debug-update         | openSUSE-Leap-42.2-Update-Debug          | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/leap/42.2/oss/                      |        
10 | repo-debug-update-non-oss | openSUSE-Leap-42.2-Update-Debug-Non-Oss  | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/leap/42.2/non-oss/                  |        
11 | repo-non-oss              | openSUSE-Leap-42.2-Non-Oss               | Yes     | (r ) Yes  | Yes     |   99     | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/non-oss/             |        
12 | repo-oss                  | openSUSE-Leap-42.2-Oss                   | Yes     | (r ) Yes  | Yes     |   99     | yast2  | http://download.opensuse.org/distribution/leap/42.2/repo/oss/                 |        
13 | repo-source               | openSUSE-Leap-42.2-Source                | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/42.2/repo/oss/          |        
14 | repo-source-non-oss       | openSUSE-Leap-42.2-Source-Non-Oss        | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/42.2/repo/non-oss/      |        
15 | repo-update               | openSUSE-Leap-42.2-Update                | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/42.2/oss/                            |        
16 | repo-update-non-oss       | openSUSE-Leap-42.2-Update-Non-Oss        | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/42.2/non-oss/                        |


Code:
zypper se -si r8168 broadcom
Loading repository data...
Reading installed packages...

S | Name                    | Type    | Version                       | Arch   | Repository       
--+-------------------------+---------+-------------------------------+--------+------------------
i | broadcom-wl             | package | 6.30.223.271-2.6              | x86_64 | packman          
i | broadcom-wl-kmp-default | package | 6.30.223.271_k4.4.27_2-42.1   | x86_64 | (System Packages)
i | broadcom-wl-kmp-default | package | 6.30.223.271_k4.4.57_18.3-2.6 | x86_64 | packman

Code:
zypper up
Loading repository data...
Reading installed packages...

The following 43 package updates will NOT be installed:
  boost-devel broadcom-wl ffmpeg gimp gimp-help-browser gimp-lang gimp-plugins-python hplip-hpijs hplip-sane kernel-firmware kio_audiocd lcms2
  libFLAC++6 libFLAC8 libXss1 libavcodec57 libavdevice57 libavfilter6 libavformat57 libavresample3 libavutil55 libbabl-0_1-0 libdbusmenu-qt5-2
  libgimp-2_0-0 libgimpui-2_0-0 liblcms2-2 libpng16-16 libpng16-compat-devel libpng16-devel libpostproc54 libsoxr0 libswresample2 libswscale4
  libva-drm1 libva-x11-1 libva1 libxkbcommon-x11-0 libxkbcommon0 lua pthread-stubs-devel ucode-amd ucode-intel vaapi-dummy-driver

The following 4 NEW packages are going to be installed:
  broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1 kernel-default-4.10.9-1.1.g195f937 r8168 r8168-kmp-default

The following 22 packages are going to be upgraded:
  apparmor-abstractions apparmor-docs apparmor-parser apparmor-profiles apparmor-utils handbrake-cli handbrake-gtk handbrake-gtk-lang
  libapparmor-devel libapparmor1 libpurple libpurple-branding-openSUSE libpurple-lang libpurple-tcl libxine2 libxine2-codecs libxine2-pulse
  perl-apparmor python3-apparmor telepathy-mission-control-plugin-goa xine-ui youtube-dl

22 packages to upgrade, 4 new.
Overall download size: 70.9 MiB. Already cached: 2.2 MiB. After the operation, additional 268.8 MiB will be used.
Continue? [y/n/...? shows all options] (y): y
.......
.......
.......
In cache r8168-kmp-default-8.044.02_k4.4.27_2-4.1.x86_64.rpm                                             (25/26), 542.4 KiB (  3.7 MiB unpacked)
In cache broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1.x86_64.rpm                                  (26/26),   1.7 MiB (  8.4 MiB unpacked)
Checking for file conflicts: ............................................................................................................[error]
Detected 1 file conflict:

File /lib/modules/4.4.27-2-default/updates/wl.ko
  from install of
     broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-44.1.x86_64 (Sauerland)
  conflicts with file from package
     broadcom-wl-kmp-default-6.30.223.271_k4.4.27_2-42.1.x86_64 (@System)

File conflicts happen when two packages attempt to install files with the same name but different contents. If you continue, conflicting files will be replaced losing the previous content.
Continue? [yes/no] (no): yes
...............
...............
...............
Nach zypper up steht das Netzwerk. :igitt:
Reanimierung mit
https://linux-club.de/forum/viewtopic.php?f=86&t=121755#p779491
und
Code:
reboot

Netzwerk läuft wieder. :p :p

Code:
zypper se -sir http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2
Loading repository data...
Reading installed packages...

S | Name                     | Type    | Version                     | Arch   | Repository
--+--------------------------+---------+-----------------------------+--------+-----------
i | broadcom-wl-kmp-default  | package | 6.30.223.271_k4.4.27_2-44.1 | x86_64 | Sauerland 
i | r8168                    | package | 8.044.02-4.1                | x86_64 | Sauerland 
i | r8168-kmp-default        | package | 8.044.02_k4.4.27_2-4.1      | x86_64 | Sauerland 
i | sane-backends            | package | 1.0.25.git20170403-3.1      | x86_64 | Sauerland 
i | sane-backends-autoconfig | package | 1.0.25.git20170403-3.1      | x86_64 | Sauerland

So ist der momentane Stand. :???:

viele grüsse aus dem abendliche Oberbayern
vom bayernherz :thumbs:
 

Sauerland

Ultimate Guru
Ich hatte auch geschrieben:
Deaktiviere mein Repo!!!!!!

danach erst zypper up.....

Aber ist jetzt egal.

Als root:
Code:
zypper rm broadcom-wl broadcom-wl-kmp-default r8168 r8168-kmp-default

Danach:
Code:
zypper mr -d http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2
Neustart.


Und noch einmal zur Erklärung:
Du hast Kernel 4.10 am laufen, mein r8168 ist (in diesem Repo) für kernel 4.4 gebaut.
Das passt schon mal nicht.

Dann kommt hinzu, das man den Kerneltreiber r8169 blacklisten muss um den r8168 in Betrieb zu nehmen.
Das passiert mit der Installation des Paketes r8168 (ohne kmp im Namen).
Da aber der passende r8168-Kerneltreiber für Kernel 4.10 nicht vorhanden ist (siehe oben), r8169 am starten gehindert wird, ist das Netzwerk tot.
Keiner von beiden Treibern läuft!

Daher mit dem obigen 1. Befehl r8168 löschen, ebenso broadcom-wl, welches du auch nicht brauchst.
Der 2. Befehl deaktiviert mein Repo.
 
OP
B

bayernherz

Hacker
hallo community
Code:
zypper se -si r8168 broadcom
Loading repository data...
Reading installed packages...
No matching items found.
Netzwerk läuft.
Sauerland hat geschrieben:
Daher mit dem obigen 1. Befehl r8168 löschen, ebenso broadcom-wl, welches du auch nicht brauchst.
Der 2. Befehl deaktiviert mein Repo.

Bleibt das Repository Sauerland jetzt dauerhaft deaktiviert ??

viele grüsse aus dem spätabendlichen Oberbayern
vom bayernherz :thumbs:
 

Sauerland

Ultimate Guru
Lösche das Repo und nimm dies neue Repo:
http://download.opensuse.org/repositories/home:/Sauerland:/branches:/home:/Sauerland/openSUSE_Leap_42.2/
Da ist nur sane-backends drin, da kannst du nichts falsch machen.
Das geht als root mit folgenden Befehlen:
Code:
zypper ar -f http://download.opensuse.org/repositories/home:/Sauerland:/branches:/home:/Sauerland/openSUSE_Leap_42.2/ Sauerland:branch
(Repo hinzufügen)
Code:
zypper rr http://download.opensuse.org/repositories/home:/Sauerland/openSUSE_Leap_42.2
(altes Repo löschen)
Code:
zypper dup --from http://download.opensuse.org/repositories/home:/Sauerland:/branches:/home:/Sauerland/openSUSE_Leap_42.2/
(Pakete auf das neue Repo umstellen)
Prioritäten brauchst du nicht einstellen, da zypper up ja keinen Repowechsel macht.
 
OP
B

bayernherz

Hacker
hallo community,

Code:
zypper lr -P
#  | Alias                     | Name                                     | Enabled | GPG Check | Refresh | Priority
---+---------------------------+------------------------------------------+---------+-----------+---------+---------
 2 | dvd                       | dvd                                      | Yes     | (r ) Yes  | Yes     |   20    
 6 | packman                   | packman                                  | Yes     | (r ) Yes  | Yes     |   20    
 1 | Sauerland:branch          | Sauerland:branch                         | Yes     | (r ) Yes  | Yes     |   99    
 3 | home_luckyb69             | luckybackup-testing (openSUSE_Leap_42.2) | Yes     | (r ) Yes  | No      |   99    
 4 | kernel-stable             | kernel-stable                            | Yes     | (r ) Yes  | Yes     |   99    
 5 | openSUSE-42.2-0           | openSUSE-42.2-0                          | No      | ----      | ----    |   99    
 7 | repo-debug                | openSUSE-Leap-42.2-Debug                 | No      | ----      | ----    |   99    
 8 | repo-debug-non-oss        | openSUSE-Leap-42.2-Debug-Non-Oss         | No      | ----      | ----    |   99    
 9 | repo-debug-update         | openSUSE-Leap-42.2-Update-Debug          | No      | ----      | ----    |   99    
10 | repo-debug-update-non-oss | openSUSE-Leap-42.2-Update-Debug-Non-Oss  | No      | ----      | ----    |   99    
11 | repo-non-oss              | openSUSE-Leap-42.2-Non-Oss               | Yes     | (r ) Yes  | Yes     |   99    
12 | repo-oss                  | openSUSE-Leap-42.2-Oss                   | Yes     | (r ) Yes  | Yes     |   99    
13 | repo-source               | openSUSE-Leap-42.2-Source                | No      | ----      | ----    |   99    
14 | repo-source-non-oss       | openSUSE-Leap-42.2-Source-Non-Oss        | No      | ----      | ----    |   99    
15 | repo-update               | openSUSE-Leap-42.2-Update                | Yes     | (r ) Yes  | Yes     |   99    
16 | repo-update-non-oss       | openSUSE-Leap-42.2-Update-Non-Oss        | Yes     | (r ) Yes  | Yes     |   99

Funktioniert ! Ich beobachte es noch ein bischen.
Erstmal vielen Dank an Dich Sauerland. :p :p

viele Grüsse aus dem nächtlichen Oberbayern
vom bayernherz :thumbs:
 
Oben