• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Hat mein Laptop Bluetooth und wie benutze ich meine Kopfhörer damit?

Hallo,

nachdem ich erst dachte, dass es kein Problem ist und alles klar, stelle ich mir gerade die Frage, ob mein Laptop (mit Linux Mint17) überhaupt Bluetooth hat.

Einschalten kann ich Bluetooth (wobei es sich manchmal wieder ausschaltet), wobei es mir nicht anzeigt, was wo ist, oder wie ich ein Gerät damit verbinde.

Nach etwas stöbern habe ich Bluedevil gefunden und installiert, wobei es meint "kein Adapter gefunden". Heisst das, kein Adapter eines Geräts, das damit verbunden werden kann, oder kein Adapter in den Laptop Innereien, der die Bluetoothfunktion trägt?

Im Bios habe ich nachgeschaut und dort ein "Infrarot" Gerät entdeckt - das ist doch Bluetooth, oder? Ist jedenfalls enabled. In der Bedienungsanleitung des Laptops gibt es auch einen Bezug zu Bluetooth, allerdings beschränkt die sich auf die Software für Windows, die man dafür verwenden soll. Ich habe/benutze aber kein Windows.


Die Eingabe von
Code:
lsusb | grep Bluetooth

.. gibt mir kein Ergebnis raus, also gar keins und wenn ich

Code:
rfkill list

eingebe, dann kommt nur ein Eintrag

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

Kein Bluetooth weit und breit. Allerdings ist es möglich per

Code:
sudo /etc/init.d/bluetooth restart

Bluetooth einzuschalten. Steht jedenfalls so im Terminal:
* Stopping bluetooth
* Starting bluetooth

Einfluss auf Bluedevil hat es aber keins (könnte auch das andere, vorinstallierte bluez(?) sein, das wird aus der Statusanzeige leider nicht ganz klar). Das meint nach wie vor, Bluetooth ist aus.


Ich bin ganz ehrlich verwirrt. Fragen, die ich gerne beantwortet hätte:

1. Wo und wie stelle ich unzweideutig fest, ob und welche Art von Bluetooth ich auf dem Laptop habe?
2. Wo und wie finde ich heraus, ob die notwendigen Treiber alle installiert sind?
3. Welches Programm verwende ich (wie!), um mein Bluetooth zuverlässig benutzen und auch wieder ausschalten zu können?
4. Wie verbinde ich unfallfrei diese Kopfhörer http://philips.to/2iGhgv7 (in blau, nicht rosa!) mit dem Laptop und sage Linux, dass es diese ansteuern soll und nicht die im Laptop eingebauten Lautsprecher?

Danke schonmal für die Hilfe, Gruss!
 

Sauerland

Ultimate Guru
Und was für ein DesktopEnvironment läuft da?
KDE4, Plasma5, Gnome, XFCE oder oder.....
In welcher Version?
 
OP
H

Holdidoldi

Newbie
Ich habe Mint Mate 17.3 installiert.

Zwei weitere Befehle mit Infohappen kann ich noch präsentieren:

Code:
lsusb -v | grep Bluetooth
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing

(das ist kein copy+paste Fehler von mir, sondern war so in der Ausgabe.)

und dann wäre da noch:

Code:
dmesg | grep -i Bluetooth
[   28.649195] Bluetooth: Core ver 2.20
[   28.649238] Bluetooth: HCI device and connection manager initialized
[   28.649243] Bluetooth: HCI socket layer initialized
[   28.649247] Bluetooth: L2CAP socket layer initialized
[   28.649258] Bluetooth: SCO socket layer initialized
[   28.655297] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   28.655300] Bluetooth: BNEP filters: protocol multicast
[   28.655304] Bluetooth: BNEP socket layer initialized
[   28.690221] Bluetooth: RFCOMM TTY layer initialized
[   28.690229] Bluetooth: RFCOMM socket layer initialized
[   28.690235] Bluetooth: RFCOMM ver 1.11

Das würde die Frage nach dem ob mit ja beantworten, nehme ich an?
 

tomm.fa

Administrator
Teammitglied
Statt
Code:
lsusb | grep Bluetooth
nimm mal besser
Code:
lsusb -v | grep -Ei blue
oder
Code:
lsusb -t
und dann nochmal ein einfaches
Code:
lsusb
hinterher.

Du kannst aber auch hwinfo installieren und die Ausgabe von
Code:
/usr/sbin/hwinfo --bluetooth
hier präsentieren.

Edit:
Zu langsam.
 
OP
H

Holdidoldi

Newbie
ok.. hier die Ergebnisse:


Code:
lsusb -v | grep -Ei blue
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing
Couldn't open device, some information will be missing

Code:
lsusb -t
/:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M

Code:
lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0461:4d51 Primax Electronics, Ltd 0Y357C PMX-MMOCZUL (B) [Dell Laser Mouse]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Code:
sudo apt-get install hwinfo
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Package hwinfo is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source


*Aktualisierung*

Im Wiki von Ubuntuusers stand zu hwinfo:

hwinfo (universe, bis einschließlich Ubuntu 13.04 und wieder ab Ubuntu 15.10)

Da Mint 17 auf Ubuntu 14.04 beruht ist es naheliegend, dass es nicht funktioniert..

Code:
uname -a
Linux RogerX 3.19.0-32-generic #37~14.04.1-Ubuntu SMP Thu Oct 22 09:37:25 UTC 2015 i686 i686 i686 GNU/Linux
 

tomm.fa

Administrator
Teammitglied
Gerade nachgeschaut, hwinfo gibt es für diese Version von Linux Mint nicht.

Holdidoldi schrieb:
Im Bios habe ich nachgeschaut und dort ein "Infrarot" Gerät entdeckt - das ist doch Bluetooth, oder?
Infrarot sollte was anderes sein als Bluetooth. Was ist das denn für ein Laptop? Link zur Bedienungsanleitung?
 

misiu

Moderator
Teammitglied
Infrarot hat mit Bluetooth nichts zu tun. Infrarot arbeitet "optisch" , Bluetooth mit Funkwellen. Es deutet nichts darauf hin, dass der Rechner Bluetooth besitzt.
MfG
Misiu
 

tomm.fa

Administrator
Teammitglied
So schaut es aus. Entweder du besorgst dir einen externen (Mini) Bluetooth-Adapter oder, falls möglich, du tauscht die interne WLAN-Karte gegen eine neue Kombikarte mit WLAN und Bluetooth aus.
 
A

Anonymous

Gast
Du kannst ja mal schauen ob du einen externen Bluetooth - Stick anstecken kannst, falls du das unbedingt brauchst.
 
Oben