drummer2010
Newbie
Hallo Leute
Leider habe ich ein kleines Problem bei dem ich nicht weiterkomme und darum bitte ich hier ehrfürchtig um eure Hilfe ;-)
Ich habe ubuntu zum Spaß als zweites System neben suse installiert. Leider finde ich es in meinem GRUB Menü nicht als Auswahl und weiß auch nicht wie ich das eintragen kann!
Hier mal ein paar Ausgaben die ich mir denke, dass man sie braucht:
Bitte um rasche Hilfe
DANKE
Leider habe ich ein kleines Problem bei dem ich nicht weiterkomme und darum bitte ich hier ehrfürchtig um eure Hilfe ;-)
Ich habe ubuntu zum Spaß als zweites System neben suse installiert. Leider finde ich es in meinem GRUB Menü nicht als Auswahl und weiß auch nicht wie ich das eintragen kann!
Hier mal ein paar Ausgaben die ich mir denke, dass man sie braucht:
Code:
fdisk -l
Platte /dev/sda: 500.1 GByte, 500107862016 Byte
255 Köpfe, 63 Sektoren/Spuren, 60801 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x000a0d41
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 2611 20972826 83 Linux
/dev/sda2 2612 39268 294446729+ 83 Linux
/dev/sda3 39268 60802 172966913 5 Erweiterte
/dev/sda5 39268 59923 165907456 83 Linux
/dev/sda6 59923 60802 7058432 82 Linux Swap / Solaris
Platte /dev/sdb: 160.0 GByte, 160041885696 Byte
255 Köpfe, 63 Sektoren/Spuren, 19457 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x00065139
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 262 2104483+ 82 Linux Swap / Solaris
/dev/sdb2 * 263 2873 20972857+ 83 Linux
/dev/sdb3 2874 19457 133210980 83 Linux
cat /boot/grub/device.map
(hd1) /dev/disk/by-id/ata-WDC_WD1600BB-00GUC0_WD-WCAL95826288
(fd0) /dev/fd0
(hd0) /dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1BQ704471
Code:
cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Do Jul 8 19:23:32 CEST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 2
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,0)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.2 - 2.6.31.12-0.2 (default)
root (hd0,0)
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1BQ704471-part1 resume=/dev/disk/by-id/ata-WDC_WD1600BB-00GUC0_WD-WCAL95826288-part1 splash=silent quiet showopts vga=0x31a
initrd /boot/initrd-2.6.31.12-0.2-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.2 - 2.6.31.12-0.2 (default)
root (hd0,0)
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1BQ704471-part1 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd /boot/initrd-2.6.31.12-0.2-default
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.12-0.2
root (hd0,0)
kernel /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1BQ704471-part1 resume=/dev/disk/by-id/ata-WDC_WD1600BB-00GUC0_WD-WCAL95826288-part1 splash=silent quiet showopts vga=0x31a
initrd /boot/initrd-2.6.31.12-0.2-desktop
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.2 - 2.6.31.12-0.2 (desktop)
root (hd0,0)
kernel /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/disk/by-id/ata-SAMSUNG_HD502IJ_S13TJ1BQ704471-part1 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd /boot/initrd-2.6.31.12-0.2-desktop
###Don't change this comment - YaST2 identifier: Original name: openSUSE 11.0 (/dev/sdb2)###
title openSUSE 11.0 (/dev/sdb2)
rootnoverify (hd1,1)
chainloader +1
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Diskette
rootnoverify (fd0)
chainloader +1
Bitte um rasche Hilfe
DANKE