• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Hauppauge WinTv Aero Stick[Gelöst]

Coolzero

Coolzero

Advanced Hacker
Hallo,
ich habe mir einen Hauppauge WinTv Aero Stick gekauft, nur bekomme ich aktuell unter Suse 11.2 nicht ans laufen:

lsusb
Code: 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2040:5520 Hauppauge
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 04f2:b147 Chicony Electronics Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0a5c:2151 Broadcom Corp.
dmesg
Code: 
00 TTL=64 ID=40130 DF PROTO=TCP SPT=47242 DPT=80 WINDOW=6754 RES=0x00 ACK FIN URGP=0                  
[43563.760138] usb 1-2: new high speed USB device using ehci_hcd and address 2                        
[43563.894868] usb 1-2: New USB device found, idVendor=2040, idProduct=5520                           
[43563.894930] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3                      
[43563.894979] usb 1-2: Product: WinTV Aero-T                                                         
[43563.895014] usb 1-2: Manufacturer: Hauppauge Computer Works                                        
[43563.895054] usb 1-2: SerialNumber: f0680de4                                                        
[43563.895612] usb 1-2: configuration #1 chosen from 1 choice                                         
[43564.473389] usb 1-2: firmware: requesting sms1xxx-hcw-55xxx-dvbt-02.fw                             
[43564.554654] smscore_set_device_mode: error -2 loading firmware: sms1xxx-hcw-55xxx-dvbt-02.fw, trying again with default firmware                                                                         
[43564.554723] usb 1-2: firmware: requesting dvb_nova_12mhz_b0.inp                                    
[43564.574779] smscore_set_device_mode: error -2 loading firmware: dvb_nova_12mhz_b0.inp              
[43564.574830] smsusb_init_device: line: 383: smscore_start_device(...) failed                        
[43564.575020] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.575158] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.575258] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.575380] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.576402] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.576641] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.576889] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.577011] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.577134] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.577259] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes                            
[43564.577352] sms_ir_exit:                                                                           
[43564.717858] smsusb: probe of 1-2:1.0 failed with error -2                                          
[43564.717973] usbcore: registered new interface driver smsusb                                        
[43603.905181] usb 1-2: USB disconnect, address 2                                                     
[43613.580214] usb 1-2: new high speed USB device using ehci_hcd and address 3                        
[43613.714917] usb 1-2: New USB device found, idVendor=2040, idProduct=5520                           
[43613.714980] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3                      
[43613.715029] usb 1-2: Product: WinTV Aero-T                                                         
[43613.715064] usb 1-2: Manufacturer: Hauppauge Computer Works
[43613.715104] usb 1-2: SerialNumber: f0680de4
[43613.715663] usb 1-2: configuration #1 chosen from 1 choice
[43613.722425] usb 1-2: firmware: requesting sms1xxx-hcw-55xxx-dvbt-02.fw
[43613.759837] smscore_set_device_mode: error -2 loading firmware: sms1xxx-hcw-55xxx-dvbt-02.fw, trying again with default firmware
[43613.759903] usb 1-2: firmware: requesting dvb_nova_12mhz_b0.inp
[43613.800922] smscore_set_device_mode: error -2 loading firmware: dvb_nova_12mhz_b0.inp
[43613.800970] smsusb_init_device: line: 383: smscore_start_device(...) failed
[43613.801201] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.801824] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.802822] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.802956] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.803057] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.803692] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.803819] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.803931] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.804701] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.804837] smsusb_onresponse: line: 116: error, urb status -2, 0 bytes
[43613.804885] sms_ir_exit:
[43613.810876] smsusb: probe of 1-2:1.0 failed with error -2
[43977.812183] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.101 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=33571 DF PROTO=TCP SPT=50630 DPT=80 WINDOW=6688 RES=0x00 ACK FIN URGP=0
[44217.501130] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.101 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=17714 DF PROTO=TCP SPT=38643 DPT=80 WINDOW=6688 RES=0x00 ACK FIN URGP=0
[44217.501386] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.101 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=24742 DF PROTO=TCP SPT=38645 DPT=80 WINDOW=6710 RES=0x00 ACK FIN URGP=0
[44848.181111] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.101 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=41999 DF PROTO=TCP SPT=51973 DPT=80 WINDOW=6688 RES=0x00 ACK FIN URGP=0
[45162.372108] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.101 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=11829 DF PROTO=TCP SPT=42313 DPT=80 WINDOW=6655 RES=0x00 ACK FIN URGP=0

Er wird ja schonmal richtig erkannt, aber was nun?
 
M

mkossmann

Member
Coolzero schrieb:
Hallo,
ich habe mir einen Hauppauge WinTv Aero Stick gekauft, nur bekomme ich aktuell unter Suse 11.2 nicht ans laufen:
[...]
Code: 
[43564.554654] smscore_set_device_mode: error -2 loading firmware: sms1xxx-hcw-55xxx-dvbt-02.fw, trying again with default firmware                                                                         
[43564.554723] usb 1-2: firmware: requesting dvb_nova_12mhz_b0.inp                                    
[43564.574779] smscore_set_device_mode: error -2 loading firmware: dvb_nova_12mhz_b0.inp              
[43564.574830] smsusb_init_device: line: 383: smscore_start_device(...) failed
Die Firmware fehlt. Siehe http://www.heise.de/foren/S-Geloest...T-Stick-Gentoo/forum-72015/msg-16200555/read/
Zum Vergrößern anklicken....
 
OP
Coolzero

Coolzero

Advanced Hacker
Ok, hab die Firmeware runtergeladen und nach /lib/Firmware kopiert!
dmesg sagt jetzt

Code: 
[ 3266.940213] usb 3-2: new full speed USB device using ohci_hcd and address 3
[ 3267.155258] usb 3-2: New USB device found, idVendor=0fcf, idProduct=1004
[ 3267.155321] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3267.155370] usb 3-2: Product: Dynastream ANT2USB
[ 3267.155407] usb 3-2: Manufacturer: Silicon Labs
[ 3267.155444] usb 3-2: SerialNumber: 10110
[ 3267.155998] usb 3-2: configuration #1 chosen from 1 choice
[ 3267.161952] cp210x 3-2:1.0: cp210x converter detected
[ 3267.330624] usb 3-2: reset full speed USB device using ohci_hcd and address 3
[ 3267.538532] usb 3-2: cp210x converter now attached to ttyUSB0
[ 4294.608549] usb 3-2: USB disconnect, address 3
[ 4294.609658] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[ 4294.609787] cp210x 3-2:1.0: device disconnected
[ 4301.236078] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 4301.373968] usb 1-2: New USB device found, idVendor=2040, idProduct=5520
[ 4301.374020] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4301.374057] usb 1-2: Product: WinTV Aero-T
[ 4301.374083] usb 1-2: Manufacturer: Hauppauge Computer Works
[ 4301.374113] usb 1-2: SerialNumber: f0680de4
[ 4301.374654] usb 1-2: configuration #1 chosen from 1 choice
[ 4301.542057] usb 1-2: firmware: requesting sms1xxx-hcw-55xxx-dvbt-02.fw
[ 4302.228145] smscore_set_device_mode: firmware download success: sms1xxx-hcw-55xxx-dvbt-02.fw
[ 4302.298169] DVB: registering new adapter (Hauppauge WinTV MiniStick)
[ 4302.298866] DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
[ 4302.316340] usbcore: registered new interface driver smsusb
[ 4683.725198] SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.0.100 DST=91.203.99.45 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28350 DF PROTO=TCP SPT=54733 DPT=80 WINDOW=6754 RES=0x00 ACK FIN URGP=0

Hab noch kdetv instaliert, aber das erkennt den stick nicht, was muss ich noch tun?
 
M

mkossmann

Member
Unterstützt KDETV denn überhaupt DVB-T ? Meines Wissens geht das nur mit analog TV. Versuch es stattdessen mal mit kaffeine.
 
OP
Coolzero

Coolzero

Advanced Hacker
Kaffeine zeigt Fernsehn an, aber das Gerät nennt sich:
Code: 
Siano Mobile Digital MDTV Reciver

Ist das jetzt mein Aero Stick? Kann das leider im moment nicht überprüfen da ich hier keinen dvtb empfang habe
 
M

mkossmann

Member
In deinem Logfile findest du ja auch :
Code: 
[ 4302.298169] DVB: registering new adapter (Hauppauge WinTV MiniStick)
[ 4302.298866] DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben