juergen&lx
Newbie
Beim Start eines Clients über PXE bleibt das System hier hängen:
ausgeführt.
Pakete:
Kann mir jemand sagen was hier noch fehlt?
-----> Checking for config file: config.00:30:48:29:0b:62(natürlich mit meiner MAC-Adresse)
-----> Checking for config file: config.C0A80038
-----> Checking for config file: config.C0A8003
-----> Checking for config file: config.C0A800
-----> Checking for config file: config.C0A80
-----> Checking for config file: config.C0A8
-----> Checking for config file: config.C0A
-----> Checking for config file: config.C0
-----> Checking for config file: config.C
-----> Checking for config file: config.default
-----> Including required kernel modules...
-----> Probing module: serverworks
-----> Probing module: aic7xxx
-----> Probing module: ohci-hcd
-----> Mounting NBD root system: 192.168.0.1 2000 [/dev/nbd0]...
Negotiation: ..size = 138484KB
-----> Filesystem of remote root system is: squashfs
-----> Can't find rootfs tarball
-----> Failed to mount root filesystem
-----> rebootExeption: error consoles at Alt-F3/F4
-----> rebootExeption: reboot in 120 sec...
Code:
kiwi-ltsp-setup -c
Pakete:
Code:
linux2:/ # rpm -qa | grep kiwi
kiwi-desc-netboot-3.05-2.1
kiwi-3.05-2.1
kiwi-ltsp-bootimages-0.5.0-1.1
kiwi-tools-3.05-2.1
kiwi-desc-ltsp-0.5.0-2.1
kiwi-pxeboot-3.05-2.1
kiwi-ltsp-prebuilt-0.5.0-3.1
linux2:/ # rpm -qa | grep ltsp
ltsp-server-5.1.24_080912-4.1
easy-ltsp-0.5_081006-4.1
kiwi-ltsp-bootimages-0.5.0-1.1
kiwi-desc-ltsp-0.5.0-2.1
ltspfs-0.5.4_080912-4.1
kiwi-ltsp-prebuilt-0.5.0-3.1
Code:
linux2:/ # cat /etc/sysconfig/kiwi-ltsp
## Path: System/Kiwi-ltsp
## Description: kiwi-ltsp setup - Part of KIWI-LTSP as created by CyberOrg
# Copyright (c) 2007 Cyberorg
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
# Place, Suite 330, Boston, MA 02111-1307 USA
#
# Authors: Cyberorg Cyberorg <cyberorg@cyberorg.info>
# Magnus Boman <captain.magnus@gmail.com>
#
# Version Date Changes
# 0.1.1 2007-08-25 Initial release
# 0.1.2 2007-08-27 Added {SUSE,LTSP}_INSTALL_SOURCE
# 0.1.2 2007-09-05 Image type and nfs chroot paths
# 0.1.3 2007-09-09 Added DHCP_IFACE
# 0.1.4 2007-09-11 Move it to /etc/sysconfig
# 0.1.5 2007-09-24 Added LTSSQUASHPATH="/srv/kiwi-ltsp"
# 0.1.6 2007-11-04 Auto detect server IP address based on specified DHCP interface
## Type: integer(0:1)
## Default: 0
#Set LTSP_DEBUG "0" logs to file and "1" to log KIWI activity to screen instead of log file
LTSP_DEBUG="1"
## Type: list(NFS,NBD)
## Default: NBD
#Set the image type, NFS and NBD supported, NBD is default
IMAGETYPE="NBD"
## Type: string
## Default: /mnt/10.3
#Set the installation source path or URL
SUSE_INSTALL_SOURCE="/mnt/10.3"
## Type: string(yast2,rpm-dir)
## Default: yast2
#Set the installation source type
SUSE_INSTALL_SOURCE_TYPE="yast2"
## Type: list(10.3,11.0)
## Default: 11.0
#Set the openSUSE version to use for creating image
SUSE_VERSION="10.3"
## Type: string
## Default: 10.0.0.50 10.0.0.100
#Range of IP addresses to be used for DHCP setup
DHCP_RANGE="192.168.0.50 192.168.0.100"
## Type: string
## Default: 10.0.0.0
#Subnet to be used for DHCP setup
DHCP_SUBNET="192.168.0.0"
## Type: string
## Default: 255.255.255.0
#Netmask to be used for DHCP setup
DHCP_NETMASK="255.255.255.0"
## Type: string(eth0,eth1,eth2,ANY)
## Default: ANY
#DHCP Interface connected to ltsp network
DHCP_IFACE="eth1"
## Type: string
## Default: 10.0.0.254
#Set the IP address of this server that would be accessed by ltsp clients
SERVER_IP="192.168.0.2"
## Type: string
## Default: digitalairlines.com
#your domainname for DHCP setup
DOMAIN="llix.de"
## Type: string
## Default: $SERVER_IP
#DNS server to be used for DHCP setup
NAME_SERVERS="$SERVER_IP"
## Type: string
## Default: $SERVER_IP
#Gateway IP to be used for DHCP setup
GATEWAY="$SERVER_IP"
## Type: string
## Default: $SERVER_IP
#TFTP server IP for PXE boot, this is the server where the netboot image is stored
#This is usually same as server IP, do not change this if you don't know what it is.
TFTP_SERVER="$SERVER_IP"
## Type: string
## Default: /usr/share/kiwi/image/ltsp/suse-$SUSE_VERSION
#Please do not change this, unless you know what you are doing
KIWIPATH="/usr/share/kiwi/image/ltsp/suse-$SUSE_VERSION"
## Type: string
## Default: /srv/kiwi-ltsp
#Please do not change this, unless you know what you are doing
DESTPATH="/srv/kiwi-ltsp"
## Type: string
## Default: /srv/tftpboot
#Please do not change this, unless you know what you are doing
TFTPBOOTPATH="/srv/tftpboot"
## Type: string
## Default: /tmp/kiwi-netboot
#Please do not change this, unless you know what you are doing
TMPPATH="/tmp/kiwi-netboot"
## Type: string
## Default: /srv/kiwi-ltsp
#Please do not change this, unless you know what you are doing
LTSSQUASHPATH="/srv/kiwi-ltsp"
## Type: string
## Default: $LTSSQUASHPATH-nfs
#Please do not change this, unless you know what you are doing
LTSNFSPATH="$LTSSQUASHPATH-nfs"
## Type: string
## Default: /usr/share/kiwi/image/netboot/suse-$SUSE_VERSION
#Please do not change this, unless you know what you are doing
KIWINBPATH="/usr/share/kiwi/image/netboot/suse-$SUSE_VERSION"