Winterlich
Newbie
Hallo zusammen,
ich habe letzte Woche einen neuen Kernel auf meinem Suse 11.1 System installiert: linux-jbzf 2.6.27.19-3.2-pae.
Nach dem Neustart war der Grub-Bootmanager zerschossen, ich habe ihn dann per Suse-Installationscd neu installiert.
Seit dem funktioniert das Booten von allen Kernelversionen, leider aber nicht das Booten von Windows XP.
Direkt nach Anwählen von Windows kehrt der Hauptbildschirm von Grub zurück.
Ich habe hier mal die menu.lst mitgegeben:
Kann damit jemand was anfangen?
mfg,
Winterlich
ich habe letzte Woche einen neuen Kernel auf meinem Suse 11.1 System installiert: linux-jbzf 2.6.27.19-3.2-pae.
Nach dem Neustart war der Grub-Bootmanager zerschossen, ich habe ihn dann per Suse-Installationscd neu installiert.
Seit dem funktioniert das Booten von allen Kernelversionen, leider aber nicht das Booten von Windows XP.
Direkt nach Anwählen von Windows kehrt der Hauptbildschirm von Grub zurück.
Ich habe hier mal die menu.lst mitgegeben:
Code:
# Modified by YaST2. Last modification on Mo Mär 23 22:47:22 CET 2009
default 2
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,5)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.1 - 2.6.27.19-3.2 (default)
root (hd0,5)
kernel /boot/vmlinuz-2.6.27.19-3.2-default root=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part6 resume=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part5 splash=silent showopts vga=0x317
initrd /boot/initrd-2.6.27.19-3.2-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.1 - 2.6.27.19-3.2 (default)
root (hd0,5)
kernel /boot/vmlinuz-2.6.27.19-3.2-default root=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part6 showopts ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x317
initrd /boot/initrd-2.6.27.19-3.2-default
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.1 - 2.6.27.19-3.2 (pae)
kernel (hd0,5)/boot/vmlinuz-2.6.27.19-3.2-pae root=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part6 resume=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part5 splash=silent showopts vga=0x317
initrd (hd0,5)/boot/initrd-2.6.27.19-3.2-pae
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.1 - 2.6.27.19-3.2 (pae)
root (hd0,5)
kernel /boot/vmlinuz-2.6.27.19-3.2-pae root=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part6 showopts ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x317
initrd /boot/initrd-2.6.27.19-3.2-pae
###Don't change this comment - YaST2 identifier: Original name: linux###
title Debug -- openSUSE 11.1 - 2.6.27.19-3.2
kernel (hd0,5)/boot/vmlinuz-2.6.27.19-3.2-debug root=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part6 resume=/dev/disk/by-id/ata-WDC_WD3200BEKT-22F3T0_WD-WXM908SF3035-part5 splash=silent showopts vga=0x317
initrd (hd0,5)/boot/initrd-2.6.27.19-3.2-debug
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
Kann damit jemand was anfangen?
mfg,
Winterlich