• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Nach Update auf 11.1: Verzögerung beim Booten

awsatnet

Member
Folgendes System:
AMD Athlon 2500+ auf AsRock K7Upgrade880, 2 GB Ram, 1xHD 250 GB an IDE1-Master (3 Part mit Win), 1xHD 160 GB an IDE1-Slave (2xExt3 u. Swap mit openSuse), DVD-Laufwerk und DVD-Brenner an IDE2, 1xHD 160 GB an USB (NTFS mit ntfs-3g-Schreibzugriff), Multikartenleser an USB (intern). Kein RAID-System. Die SATA-Ports auf dem Board sind im BIOS deaktiviert.

Mit openSuse11.0 (bin erst kürzlich umgestiegen) lief das alles wunderbar, aber nach Update auf 11.1 habe ich folgendes Problem:
Das System bleibt beim Booten nach dem Aufruf "Starting MD Raid" exakt 30 Sekunden stehen, erst dann geht's weiter. Diese Verzögerung nervt etwas. Im Runlevel-Editor finde ich nichts, was auf einen laufenden RAID-Dienst hinweisen würde. Ich hätte bei der 11.0 bleiben sollen, die lief nämlich echt klasse, aber zu spät... :???:

hier meine /var/log/boot.msg:
Code:
Inspecting /boot/System.map-2.6.27.7-9-default
Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
<6> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
<6> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
<6> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
<6> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>DMI 2.3 present.
<5>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
<6>last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>kernel direct mapping tables up to 38000000 @ 10000-15000
<6>RAMDISK: 37a73000 - 37fef868
<4>ACPI: RSDP 000F8C80, 0014 (r0 ACPIAM)
<4>ACPI: RSDT 7FFB0000, 0030 (r1 A M I  OEMRSDT   4000508 MSFT       97)
<4>ACPI: FACP 7FFB0200, 0081 (r2 A M I  OEMFACP   4000508 MSFT       97)
<4>ACPI: DSDT 7FFB0350, 346D (r1  K7UPG K7UPG001        1 INTL  2002026)
<4>ACPI: FACS 7FFC0000, 0040
<4>ACPI: APIC 7FFB0300, 004A (r1 A M I  OEMAPIC   4000508 MSFT       97)
<4>ACPI: OEMB 7FFC0040, 003F (r1 A M I  OEMBIOS   4000508 MSFT       97)
<7>ACPI: Local APIC address 0xfee00000
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>  mapped low ram: 0 - 38000000
<6>  low ram: 00000000 - 38000000
<6>  bootmap 00012000 - 00019000
<6>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
<6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
<6>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
<6>  #3 [0000100000 - 00006509dc]    TEXT DATA BSS ==> [0000100000 - 00006509dc]
<6>  #4 [0037a73000 - 0037fef868]          RAMDISK ==> [0037a73000 - 0037fef868]
<6>  #5 [0000651000 - 0000654000]    INIT_PG_TABLE ==> [0000651000 - 0000654000]
<6>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
<6>  #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
<6>  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
<4>Zone PFN ranges:
<4>  DMA      0x00000010 -> 0x00001000
<4>  Normal   0x00001000 -> 0x00038000
<4>  HighMem  0x00038000 -> 0x0007ffb0
<4>Movable zone start PFN for each node
<4>early_node_map[2] active PFN ranges
<4>    0: 0x00000010 -> 0x0000009f
<4>    0: 0x00000100 -> 0x0007ffb0
<7>On node 0 totalpages: 524095
<7>free_area_init_node: node 0, pgdat c051ee00, node_mem_map c1000240
<7>  DMA zone: 3947 pages, LIFO batch:0
<7>  Normal zone: 223300 pages, LIFO batch:31
<7>  HighMem zone: 292240 pages, LIFO batch:31
<6>Using APIC driver default
<6>ACPI: PM-Timer IO Port: 0x808
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 1 CPUs, 0 hotplug CPUs
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
<6>PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000)
<6>PERCPU: Allocating 39068 bytes of per cpu data
<7>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519487
<5>Kernel command line: resume=/dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1 splash=silent vga=0x31a
<6>bootsplash: silent mode.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PIT calibration value
<4>Detected 1833.076 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2065100k/2096832k available (2342k kernel code, 30404k reserved, 1960k data, 316k init, 1179328k highmem)
<6>virtual kernel memory layout:
<6>    fixmap  : 0xffdf6000 - 0xfffff000   (2084 kB)
<6>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
<6>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
<6>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
<6>      .init : 0xc053a000 - 0xc0589000   ( 316 kB)
<6>      .data : 0xc034988b - 0xc0533a90   (1960 kB)
<6>      .text : 0xc0100000 - 0xc034988b   (2342 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.15 BogoMIPS (lpj=7332304)
<4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>Security Framework initialized
<6>SELinux:  Disabled at boot.
<6>AppArmor: AppArmor initialized
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 12k freed
<6>ACPI: Core revision 20080609
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 528 Objects with 50 Devices 140 Methods 27 Regions
<4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>CPU0: AMD Athlon(tm) XP 2500+ stepping 00
<6>Brought up 1 CPUs
<6>Total of 1 processors activated (3666.15 BogoMIPS).
<7>CPU0 attaching NULL sched-domain.
<6>net_namespace: 1044 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
<6>PCI: Using configuration type 1 for base access
<4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:....................................................................................................................
<4>Initialized 23/27 Regions 44/44 Fields 39/39 Buffers 10/11 Packages (537 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:
<4>Executed 0 _INI methods requiring 0 _STA executions (examined 53 objects)
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff]
<7>pci 0000:00:01.0: supports D1
<7>PCI: 0000:00:09.0 reg 10 32bit mmio: [cfffe000, cfffefff]
<7>PCI: 0000:00:09.1 reg 10 32bit mmio: [cffff000, cfffffff]
<7>PCI: 0000:00:0b.0 reg 10 32bit mmio: [febe0000, febeffff]
<7>PCI: 0000:00:0b.0 reg 14 io port: [bc00, bc1f]
<7>PCI: 0000:00:0f.0 reg 10 io port: [ec00, ec07]
<7>PCI: 0000:00:0f.0 reg 14 io port: [e800, e803]
<7>PCI: 0000:00:0f.0 reg 18 io port: [e400, e407]
<7>PCI: 0000:00:0f.0 reg 1c io port: [e000, e003]
<7>PCI: 0000:00:0f.0 reg 20 io port: [dc00, dc0f]
<7>PCI: 0000:00:0f.0 reg 24 io port: [d800, d8ff]
<7>PCI: 0000:00:0f.1 reg 20 io port: [fc00, fc0f]
<7>PCI: 0000:00:10.0 reg 20 io port: [c000, c01f]
<7>pci 0000:00:10.0: supports D1
<7>pci 0000:00:10.0: supports D2
<6>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.0: PME# disabled
<7>PCI: 0000:00:10.1 reg 20 io port: [c400, c41f]
<7>pci 0000:00:10.1: supports D1
<7>pci 0000:00:10.1: supports D2
<6>pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.1: PME# disabled
<7>PCI: 0000:00:10.2 reg 20 io port: [c800, c81f]
<7>pci 0000:00:10.2: supports D1
<7>pci 0000:00:10.2: supports D2
<6>pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.2: PME# disabled
<7>PCI: 0000:00:10.3 reg 20 io port: [cc00, cc1f]
<7>pci 0000:00:10.3: supports D1
<7>pci 0000:00:10.3: supports D2
<6>pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.3: PME# disabled
<7>PCI: 0000:00:10.4 reg 10 32bit mmio: [febff800, febff8ff]
<7>pci 0000:00:10.4: supports D1
<7>pci 0000:00:10.4: supports D2
<6>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:10.4: PME# disabled
<6>HPET not enabled in BIOS. You might try hpet=force boot option
<7>PCI: 0000:00:11.5 reg 10 io port: [d000, d0ff]
<7>pci 0000:00:11.5: supports D1
<7>pci 0000:00:11.5: supports D2
<7>PCI: 0000:00:12.0 reg 10 io port: [d400, d4ff]
<7>PCI: 0000:00:12.0 reg 14 32bit mmio: [febffc00, febffcff]
<7>pci 0000:00:12.0: supports D1
<7>pci 0000:00:12.0: supports D2
<6>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:12.0: PME# disabled
<7>PCI: 0000:01:00.0 reg 10 32bit mmio: [b0000000, bfffffff]
<7>PCI: 0000:01:00.0 reg 14 io port: [a800, a8ff]
<7>PCI: 0000:01:00.0 reg 18 32bit mmio: [feaf0000, feafffff]
<7>PCI: 0000:01:00.0 reg 30 32bit mmio: [feac0000, feadffff]
<7>pci 0000:01:00.0: supports D1
<7>pci 0000:01:00.0: supports D2
<7>PCI: 0000:01:00.1 reg 10 32bit mmio: [a0000000, afffffff]
<7>PCI: 0000:01:00.1 reg 14 32bit mmio: [feae0000, feaeffff]
<7>pci 0000:01:00.1: supports D1
<7>pci 0000:01:00.1: supports D2
<7>PCI: bridge 0000:00:01.0 io port: [a000, afff]
<7>PCI: bridge 0000:00:01.0 32bit mmio: [fea00000, feafffff]
<7>PCI: bridge 0000:00:01.0 32bit mmio pref: [8ff00000, cfefffff]
<7>bus 00 -> node 0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BE, should be 96 [20080609]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 12 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>AppArmor: AppArmor Filesystem Enabled
<4>ACPI: RTC can wake from S4
<6>system 00:07: ioport range 0x295-0x296 has been reserved
<6>system 00:07: ioport range 0x3e0-0x3e7 has been reserved
<6>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:07: ioport range 0x800-0x87f has been reserved
<6>system 00:07: ioport range 0x400-0x41f has been reserved
<6>system 00:08: iomem range 0xfec80000-0xfec800ff has been reserved
<6>system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
<6>system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
<6>system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
<6>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
<6>system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
<6>system 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
<6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
<6>pci 0000:00:01.0:   IO window: 0xa000-0xafff
<6>pci 0000:00:01.0:   MEM window: 0xfea00000-0xfeafffff
<6>pci 0000:00:01.0:   PREFETCH window: 0x0000008ff00000-0x000000cfefffff
<7>pci 0000:00:01.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffff]
<6>bus: 01 index 0 io port: [a000, afff]
<6>bus: 01 index 1 mmio: [fea00000, feafffff]
<6>bus: 01 index 2 mmio: [8ff00000, cfefffff]
<6>bus: 01 index 3 mmio: [0, 0]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5618k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1233176054.568:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 4 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 435
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>PCI: VIA PCI bridge detected.Disabling DAC.
<6>pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
<7>pci 0000:01:00.0: Boot video device
<6>vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 10240k, total 262144k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=101
<6>vesafb: protected mode interface info at c000:5757
<6>vesafb: pmi: set display start = c00c57eb, set palette = c00c5837
<6>vesafb: pmi: ports = a810 a816 a854 a838 a83c a85c a800 a804 a8b0 a8b2 a8b4 
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 113709 bytes
<6>bootsplash: ...found (1280x1024, 43709 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<7>Switched to high resolution mode on CPU 0
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>TCP cubic registered
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 316k freed
<6>Write protecting the kernel text: 2344k
<6>Write protecting the kernel read-only data: 1768k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>processor ACPI_CPU:00: registered as cooling_device0
<6>ACPI: No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>pata_via 0000:00:0f.1: version 0.3.3
<6>pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<6>scsi0 : pata_via
<6>scsi1 : pata_via
<6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
<6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
<6>ata1.00: ATA-8: ExcelStor Technology J9250, GM2OA42A, max UDMA/133
<6>ata1.00: 488397168 sectors, multi 16: LBA48 
<6>ata1.01: ATA-7: SAMSUNG SP1654N, BV100-37, max UDMA/100
<6>ata1.01: 312581808 sectors, multi 16: LBA48 
<6>ata1.00: configured for UDMA/133
<6>ata1.01: configured for UDMA/100
<6>ata2.00: ATAPI: LITE-ON DVD SOHD-16P9S, FS07, max UDMA/33
<6>ata2.01: ATAPI: TSSTcorp CDDVDW SH-S202N, SB02, max UDMA/66
<6>ata2.00: configured for UDMA/33
<6>ata2.01: configured for UDMA/66
<5>scsi 0:0:0:0: Direct-Access     ATA      ExcelStor Techno GM2O PQ: 0 ANSI: 5
<5>scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP1654N  BV10 PQ: 0 ANSI: 5
<5>scsi 1:0:0:0: CD-ROM            LITE-ON  DVD SOHD-16P9S   FS07 PQ: 0 ANSI: 5
<5>scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S202N  SB02 PQ: 0 ANSI: 5
<7>sata_via 0000:00:0f.0: version 2.4
<6>sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
<6>sata_via 0000:00:0f.0: routed to hard irq line 10
<6>scsi2 : sata_via
<6>scsi3 : sata_via
<6>ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
<6>ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
<6>input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
<6>ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
<6>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
<6>Uniform Multi-Platform E-IDE driver
<6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
<6>udevd version 128 started
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250GB/232GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<4> sda6 >
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<5>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 0:0:1:0: [sdb] Write Protect is off
<7>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 0:0:1:0: [sdb] Write Protect is off
<7>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sdb:<6>USB Universal Host Controller Interface driver v3.0
<6>uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<4> sdb1 sdb2 sdb3
<5>sd 0:0:1:0: [sdb] Attached SCSI disk
<4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:10.0
<6>uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>usb 1-1: new full speed USB device using uhci_hcd and address 2
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:10.1
<6>uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>usb 1-1: New USB device found, idVendor=04b4, idProduct=6830
<6>usb 1-1: New USB device strings: Mfr=56, Product=78, SerialNumber=100
<6>usb 1-1: Product: USB2.0 Storage Device
<6>usb 1-1: Manufacturer: Cypress Semiconductor
<6>usb 1-1: SerialNumber: DEF10000C4EE969
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: UHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb3: SerialNumber: 0000:00:10.2
<6>uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<6>uhci_hcd 0000:00:10.3: UHCI Host Controller
<6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb 2-1: new low speed USB device using uhci_hcd and address 2
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:10.3
<6>ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
<6>ehci_hcd 0000:00:10.4: EHCI Host Controller
<6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
<6>ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
<6>usb 2-1: New USB device found, idVendor=147a, idProduct=e02d
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: USB IR Receiver
<6>usb 2-1: Manufacturer: USB IR Receiver
<6>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 8 ports detected
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: EHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
<6>usb usb5: SerialNumber: 0000:00:10.4
<6>usb 1-1: USB disconnect, address 2
<6>usbcore: registered new interface driver hiddev
<6>usb 2-1: USB disconnect, address 2
<6>usb 5-1: new high speed USB device using ehci_hcd and address 2
<6>usb 5-1: configuration #1 chosen from 1 choice
<6>usb 5-1: New USB device found, idVendor=04b4, idProduct=6830
<6>usb 5-1: New USB device strings: Mfr=56, Product=78, SerialNumber=100
<6>usb 5-1: Product: USB2.0 Storage Device
<6>usb 5-1: Manufacturer: Cypress Semiconductor
<6>usb 5-1: SerialNumber: DEF10000C4EE969
<6>usb 5-7: new high speed USB device using ehci_hcd and address 5
<6>usb 5-7: configuration #1 chosen from 1 choice
<6>usb 5-7: New USB device found, idVendor=058f, idProduct=6362
<6>usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>usb 5-7: Product: Mass Storage Device
<6>usb 5-7: Manufacturer: Generic
<6>usb 5-7: SerialNumber: 058F312D81B
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>usb 2-1: new low speed USB device using uhci_hcd and address 3
<6>PM: Starting manual resume from disk
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>input: USB IR Receiver USB IR Receiver as /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/input/input2
<6>input,hidraw0: USB HID v1.10 Keyboard [USB IR Receiver USB IR Receiver] on usb-0000:00:10.1-1
<6>usb 2-1: New USB device found, idVendor=147a, idProduct=e02d
<6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-1: Product: USB IR Receiver
<6>usb 2-1: Manufacturer: USB IR Receiver
<6>usb 2-2: new full speed USB device using uhci_hcd and address 4
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sdb2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>usb 2-2: configuration #1 chosen from 1 choice
<6>usb 2-2: New USB device found, idVendor=04a9, idProduct=2206
<6>usb 2-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
<6>usb 2-2: Product: CanoScan
<6>usb 2-2: Manufacturer: Canon
<6>udevd version 128 started
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:1:0: Attached scsi generic sg1 type 0
<5>scsi 1:0:0:0: Attached scsi generic sg2 type 5
<5>scsi 1:0:1:0: Attached scsi generic sg3 type 5
<6>Linux agpgart interface v0.103
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<4>sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<6>agpgart: Detected VIA KT880 chipset
<6>agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
<4>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<7>sr 1:0:1:0: Attached scsi CD-ROM sr1
<6>Linux video capture interface: v2.00
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>flexcop-pci: will use the HW PID filter.
<6>flexcop-pci: card revision 2
<6>b2c2_flexcop_pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
<6>DVB: registering new adapter (FlexCop Digital TV device)
<6>b2c2-flexcop: MAC address = 00:d0:d7:14:df:c7
<3>b2c2-flexcop: i2c master_xfer failed
<3>b2c2-flexcop: i2c master_xfer failed
<3>CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
<3>CX24123: wrong demod revision: 87
<6>bttv: driver version 0.9.17 loaded
<6>bttv: using 8 buffers with 2080k (520 pages) each for capture
<6>ACPI: Power Button (CM) [PWRB]
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>b2c2-flexcop: found 'ST STV0299 DVB-S' .
<4>DVB: registering frontend 0 (ST STV0299 DVB-S)...
<6>b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
<6>bttv: Bt8xx card found (0).
<6>bttv 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<6>bttv0: Bt878 (rev 2) at 0000:00:09.0, irq: 17, latency: 32, mmio: 0xcfffe000
<6>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
<6>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
<7>bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
<6>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
<6>bt878 #0 [sw]: Test OK
<6>tveeprom 3-0050: Hauppauge model 61204, rev AMA , serial# 3002480
<6>tveeprom 3-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
<6>tveeprom 3-0050: TV standards PAL(B/G) (eeprom 0x04)
<6>tveeprom 3-0050: audio processor is None (idx 0)
<6>tveeprom 3-0050: has no radio
<4>bttv0: Hauppauge eeprom indicates model#61204
<6>bttv0: tuner type=5
<6>bttv0: i2c: checking for MSP34xx @ 0x80... not found
<6>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
<6>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
<4>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
<6>[fglrx] Maximum main memory to use for locked dma buffers: 1896 MBytes.
<6>[fglrx]   vendor: 1002 device: 4150 count: 1
<6>[fglrx] ioport: bar 1, base 0xa800, size: 0x100
<6>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<6>[fglrx] Kernel PAT support detected, disabling driver built-in PAT support
<6>[fglrx] module loaded - fglrx 8.56.4 [Dec  1 2008] with 1 minors
<6>tuner' 3-0061: chip found @ 0xc2 (bt878 #0 [sw])
<6>Initializing USB Mass Storage driver...
<6>scsi4 : SCSI emulation for USB Mass Storage devices
<6>tuner-simple 3-0061: creating new instance
<6>tuner-simple 3-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
<6>input: PC Speaker as /devices/platform/pcspkr/input/input5
<6>scsi5 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<7>usb-storage: device found at 5
<7>usb-storage: waiting for device to settle before scanning
<6>bttv0: registered device video0
<6>bttv0: registered device vbi0
<6>bttv0: PLL: 28636363 => 35468950 .. ok
<6>via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<6>eth0: VIA Rhine II at 0x1d400, 00:0b:6a:83:d3:2e, IRQ 23.
<6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
<6>VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
<7>VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
<6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k
<6>ALSA sound/pci/via82xx.c:1931: Using DXS as PCM Playback
<5>scsi 4:0:0:0: Direct-Access     SAMSUNG  SV1604E          0000 PQ: 0 ANSI: 0
<5>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>sd 4:0:0:0: [sdc] Write Protect is off
<7>sd 4:0:0:0: [sdc] Mode Sense: 27 00 00 00
<3>sd 4:0:0:0: [sdc] Assuming drive cache: write through
<5>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160GB/149GiB)
<5>scsi 5:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
<5>sd 4:0:0:0: [sdc] Write Protect is off
<7>sd 4:0:0:0: [sdc] Mode Sense: 27 00 00 00
<3>sd 4:0:0:0: [sdc] Assuming drive cache: write through
<6> sdc:<5>sd 5:0:0:0: [sdd] Attached SCSI removable disk
<5>sd 5:0:0:0: Attached scsi generic sg4 type 0
<5>scsi 5:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
<5>sd 5:0:0:1: [sde] Attached SCSI removable disk
<5>sd 5:0:0:1: Attached scsi generic sg5 type 0
<5>scsi 5:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
<5>sd 5:0:0:2: [sdf] Attached SCSI removable disk
<5>sd 5:0:0:2: Attached scsi generic sg6 type 0
<5>scsi 5:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
<5>sd 5:0:0:3: [sdg] Attached SCSI removable disk
<5>sd 5:0:0:3: Attached scsi generic sg7 type 0
<7>usb-storage: device scan complete
<6>Adding 2562328k swap on /dev/sdb1.  Priority:-1 extents:1 across:2562328k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<6>usb 5-1: reset high speed USB device using ehci_hcd and address 2
<4> sdc1
<5>sd 4:0:0:0: [sdc] Attached SCSI disk
<5>sd 4:0:0:0: Attached scsi generic sg8 type 0
<7>usb-storage: device scan complete
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sdb3, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Jan 28 20:54:23 2009

Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
Invoking userspace resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
resume: libgcrypt version: 1.4.1
Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
Invoking in-kernel resume from /dev/disk/by-id/ata-SAMSUNG_SP1654N_S0GEJ1NL204023-part1
Waiting for device /dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 to appear:  ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2: clean, 162453/2240224 files, 1344378/8960253 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2

Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jan 28 21:54:25 2009

done
Starting udevd: done
Loading drivers, configuring devices: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Activating device mapper...
done
Starting MD Raid unused
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part3: recovering journal
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part3: clean, 13961/7372800 files, 1192982/29471242 blocks
donedone
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sdb3 on /home type ext3 (rw,acl,user_xattr)
doneFuse filesystem already availabledone
Mounting fuse control filesystemdone
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(651,29)
Creating /var/log/boot.msg
doneConfiguring serial ports...
Configured serial ports
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor profiles Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
done
Setting up hostname 'aws-suse'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(651,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Wed Jan 28 20:55:11 2009

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-Bus daemondone
Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up


done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemonChecking/updating CPU microcode unused
Initializing random number generatordone
done
Setting up (localfs) network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
    eth0      IP address: 192.168.178.115/24   
doneSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .done
Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
done
Not starting NFS client services - no NFS found in /etc/fstab:unused
Mount CIFS File Systems unused
Loading console font lat9w-16.psfu  -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde3 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting atieventsddone
Starting Avahi daemon done
Starting Avahi DNS Configuration daemon done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting java.binfmt_misc done
Starting lircd (/dev/lirc)<notice>startproc: execve (/usr/sbin/lircd) [ /usr/sbin/lircd -H default -d /dev/lirc ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/lircd ]
done
Setting up (remotefs) network interfaces:
Setting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Samba SMB daemon done
done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting smartd *** stack smashing detected ***: /usr/sbin/smartd terminated
======= Backtrace: =========
/lib/libc.so.6(__fortify_fail+0x48)[0xb7e51da8]
/lib/libc.so.6(__fortify_fail+0x0)[0xb7e51d60]
/usr/sbin/smartd[0xb807e424]
/usr/sbin/smartd[0xb8072215]
/usr/sbin/smartd[0xb8073ed6]
/usr/sbin/smartd[0xb807acd8]
/usr/sbin/smartd[0xb805f371]
/usr/sbin/smartd[0xb8060772]
/usr/sbin/smartd(main+0x35)[0xb80620d5]
/lib/libc.so.6(__libc_start_main+0xe5)[0xb7d81705]
/usr/sbin/smartd[0xb8054f41]
======= Memory map: ========
b7d64000-b7d66000 rw-p b7d64000 00:00 0 
b7d66000-b7d69000 r-xp 00000000 08:12 2003385    /lib/libdl-2.9.so
b7d69000-b7d6a000 r--p 00002000 08:12 2003385    /lib/libdl-2.9.so
b7d6a000-b7d6b000 rw-p 00003000 08:12 2003385    /lib/libdl-2.9.so
b7d6b000-b7ec0000 r-xp 00000000 08:12 2003249    /lib/libc-2.9.so
b7ec0000-b7ec1000 ---p 00155000 08:12 2003249    /lib/libc-2.9.so
b7ec1000-b7ec3000 r--p 00155000 08:12 2003249    /lib/libc-2.9.so
b7ec3000-b7ec4000 rw-p 00157000 08:12 2003249    /lib/libc-2.9.so
b7ec4000-b7ec7000 rw-p b7ec4000 00:00 0 
b7ec7000-b7ed4000 r-xp 00000000 08:12 2003398    /lib/libgcc_s.so.1
b7ed4000-b7ed5000 r--p 0000c000 08:12 2003398    /lib/libgcc_s.so.1
b7ed5000-b7ed6000 rw-p 0000d000 08:12 2003398    /lib/libgcc_s.so.1
b7ed6000-b7efd000 r-xp 00000000 08:12 2003402    /lib/libm-2.9.so
b7efd000-b7efe000 r--p 00026000 08:12 2003402    /lib/libm-2.9.so
b7efe000-b7eff000 rw-p 00027000 08:12 2003402    /lib/libm-2.9.so
b7eff000-b7fe7000 r-xp 00000000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fe7000-b7fe8000 ---p 000e8000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fe8000-b7fec000 r--p 000e8000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fec000-b7fed000 rw-p 000ec000 08:12 1350813    /usr/lib/libstdc++.so.6.0.10
b7fed000-b7ff3000 rw-p b7fed000 00:00 0 
b7ff3000-b800e000 r-xp 00000000 08:12 2003393    /lib/libselinux.so.1
b800e000-b800f000 r--p 0001a000 08:12 2003393    /lib/libselinux.so.1
b800f000-b8010000 rw-p 0001b000 08:12 2003393    /lib/libselinux.so.1
b8010000-b8011000 rw-p b8010000 00:00 0 
b802c000-b804a000 r-xp 00000000 08:12 2003202    /lib/ld-2.9.so
b804a000-b804b000 r--p 0001d000 08:12 2003202    /lib/ld-2.9.so
b804b000-b804c000 rw-p 0001e000 08:12 2003202    /lib/ld-2.9.so
b804c000-b8099000 r-xp 00000000 08:12 1367677    /usr/sbin/smartd
b8099000-b809d000 r--p 0004c000 08:12 1367677    /usr/sbin/smartd
b809d000-b809e000 rw-p 00050000 08:12 1367677    /usr/sbin/smartd
b809e000-b80bf000 rw-p b809e000 00:00 0          [heap]
bf984000-bf999000 rw-p bffeb000 00:00 0          [stack]
ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
/etc/init.d/smartd: line 180:  3597 Aborted                 $SMARTD_BIN $smartd_opts
done
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd -pidfile /var/run/xinetd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1NL204023-part2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: microcode.ctl nfs smbfs
<notice>killproc: kill(2207,3)

Wie schalte ich dieses "Starting MD Raid" ab oder wie stelle ich das Teil ein, damit der Bootvorgang nicht 30 Sekunden stehen bleibt?

Gruß

Andi
 

Tooltime

Advanced Hacker
Runlevel-Editor -> Expertenmodus -> boot.md

Allerdings würde ich mich fragen warum überhaupt nach einen RAID gesucht wird. War mal im BIOS ein RAID eingerichtet, oder befand sich eins auf einer der Platten?
 

josef-wien

Ultimate Guru
Suchen wir einmal:
Code:
cat /etc/sysconfig/kernel
cat /etc/mdadm.conf
cat /proc/mdstat
ls /etc/init.d/boot.d/*boot.md
fdisk -l
 
OP
A

awsatnet

Member
Na Klasse - da sitzt man vor dem Runlevel-Editor und sieht den Punkt "Expertenmodus" nicht...
"boot.md" war bei "B" ange"x"t - das x entfernt und der Bootvorgang flutscht. Super.

Warum das so ist? Ich hab' mich gefragt und habe keine Ahnung. Bei 11.0 wurde kein RAID-System gesucht, Phänomen trat erst nach dem Update auf 11.1 auf. Ich hatte auf dem Board auch noch kein RAID eingerichtet.

Also: vielen Dank erstmal.
 
Oben