Hallo erst einmal an alle hier,
als SUSE-Newbi erhoffe ich mir nach 2Tagen Haare raufen und 4eckigen Augen ein wenig Hilfe bei meinem Problem.
Kurz etwas zu meinem System und wichtigen Eck-Daten:
BS: OpenSUSE 10.3
WLAN-Karte: rt2400-Chipsatz
Netzstruktur: I-Net <-> WLAN-DSL-Router <-> LAN (Wlan per WEP, shared, mit 2 Win-Kisten zusätzlich)
Problembeschreibung:
Seit einigen Tagen versuche ich, eine Internet-Verbindung via Wlan-DSL-Router aufzubauen.
Nachdem ich also annahm, daß meine WLan-Karte auf dem Suse-System nicht ordentlich läuft mittels der mitgelieferten OpenSUSE-Treiber, entschied ich mich, es mittels NDISWRAPPER zu versuchen.
Nun läuft zumindestens netzintern das WLan, d.h. ich kann also innerhalb des Lan`s pingen und auch traceroute ausführen. Alles ist erreichbar.
Lediglich der Zugang nach draußen bleibt mir auf dem OpenSUSE-PC verwehrt.
Der Befehl "route -n" gibt mir zwar etwas aus, jedoch kann ich kein "add" verwenden, da bekomm ich nur irgendwelche Hinweise auf "inet-route"... Leider sind meine Konsolen- und Englisch-Kenntniss nur rudimentär :-D
Auch das Eintragen in den Experteneinstellungen und Yast -> Routing brachten bisher nichts. :-(
Nun hoffe ich, daß ihr mir mit einem kleinen "Schubs" helfen könnt, wie ich das Problem lösen kann. Dazu im Anhang diverse Konsolenbefehle und deren Ausgabe:
Ich bedanke mich schon jetzt für eure Bemühungen und Hilfe.
Falls ich aus Versehen noch einmal einen Thread eröffnet habe, der schon vorhanden ist, bitte ich um Entschuldigung und einen kleinen Hinweis, wohin mein Anliegen verschoben wurde.
Mit besten Grüßen
als SUSE-Newbi erhoffe ich mir nach 2Tagen Haare raufen und 4eckigen Augen ein wenig Hilfe bei meinem Problem.
Kurz etwas zu meinem System und wichtigen Eck-Daten:
BS: OpenSUSE 10.3
WLAN-Karte: rt2400-Chipsatz
Netzstruktur: I-Net <-> WLAN-DSL-Router <-> LAN (Wlan per WEP, shared, mit 2 Win-Kisten zusätzlich)
Problembeschreibung:
Seit einigen Tagen versuche ich, eine Internet-Verbindung via Wlan-DSL-Router aufzubauen.
Nachdem ich also annahm, daß meine WLan-Karte auf dem Suse-System nicht ordentlich läuft mittels der mitgelieferten OpenSUSE-Treiber, entschied ich mich, es mittels NDISWRAPPER zu versuchen.
Nun läuft zumindestens netzintern das WLan, d.h. ich kann also innerhalb des Lan`s pingen und auch traceroute ausführen. Alles ist erreichbar.
Lediglich der Zugang nach draußen bleibt mir auf dem OpenSUSE-PC verwehrt.
Der Befehl "route -n" gibt mir zwar etwas aus, jedoch kann ich kein "add" verwenden, da bekomm ich nur irgendwelche Hinweise auf "inet-route"... Leider sind meine Konsolen- und Englisch-Kenntniss nur rudimentär :-D
Auch das Eintragen in den Experteneinstellungen und Yast -> Routing brachten bisher nichts. :-(
Nun hoffe ich, daß ihr mir mit einem kleinen "Schubs" helfen könnt, wie ich das Problem lösen kann. Dazu im Anhang diverse Konsolenbefehle und deren Ausgabe:
Code:
Micha:~ # dmesg
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
Entering add_active_range(0, 0, 65520) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65520
HighMem 65520 -> 65520
early_node_map[1] active PFN ranges
0: 0 -> 65520
On node 0 totalpages: 65520
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 479 pages used for memmap
Normal zone: 60945 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.2 present.
Using APIC driver default
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Built 1 zonelists. Total pages: 65009
Kernel command line: root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP0812N0777J1FWB02867-part6 vga=0x317 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/sda5 splash=silent
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
bootsplash: silent mode.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 1500.156 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 251880k/262080k available (1825k kernel code, 9664k reserved, 764k data, 228k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c86ed - 0xc0387964 ( 764 kB)
.text : 0xc0100000 - 0xc02c86ed (1825 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3010.21 BogoMIPS (lpj=6020430)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs... done
Freeing initrd memory: 4014k freed
CPU0: AMD Athlon(tm) XP 1800+ stepping 01
SMP motherboard not detected.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbec0, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 5000-500f claimed by vt8235 SMB
PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread CFFDEAB0 could not acquire Mutex [3] [20070126]
pnp: 00:07: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
pnp: 00:07: iomem range 0xfec00000-0xfec0ffff could not be reserved
pnp: 00:07: iomem range 0xfee00000-0xfee0ffff could not be reserved
pnp: 00:08: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:08: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:08: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:08: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: e8000000-e80fffff
PREFETCH window: e4000000-e7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1219857475.468:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xe4000000, mapped to 0xd0880000, using 6144k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:441b
vesafb: pmi: set display start = c00c4489, set palette = c00c44c3
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78436 bytes
bootsplash: ...found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
input: PS/2 Generic Mouse as /class/input/input2
NET: Registered protocol family 1
spurious 8259A interrupt: IRQ7.
Testing NMI watchdog ... OK.
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:11.1: version 0.3.1
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001dc00 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001dc08 irq 15
Clocksource tsc unstable (delta = 127999836 ns)
Time: pit clocksource has been installed.
ata1.00: ATA-7: SAMSUNG SP0812N, TK100-24, max UDMA/100
ata1.00: 156368016 sectors, multi 16: LBA48
ata1.01: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS01, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4320B, 1.00, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0812N TK10 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D162C TS01 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4320B 1.00 PQ: 0 ANSI: 5
thermal: Unknown symbol acpi_processor_set_thermal_limit
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:10.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d000
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5<7>PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:10.3
PCI: Sharing IRQ 10 with 0000:00:0c.0
PCI: Sharing IRQ 10 with 0000:00:13.0
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
sda6<6>ehci_hcd 0000:00:10.3: irq 10, io mem 0xe8102000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
usb usb2: SerialNumber: 0000:00:10.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
sda7 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
PCI: Found IRQ 11 for device 0000:00:10.1
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d400
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:10.2
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 5, io base 0x0000d800
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 5
scsi 1:0:0:0: Attached scsi generic sg2 type 5
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver wlc811g (CNet,07/28/2003, 1.07.00.0000) loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.102 (c) Dave Jones
PCI: Found IRQ 10 for device 0000:00:0c.0
PCI: Sharing IRQ 10 with 0000:00:10.3
PCI: Sharing IRQ 10 with 0000:00:13.0
ndiswrapper (NdisMAllocateMapRegisters:906): Windows driver wlc811g requesting too many (86) map registers
ndiswrapper: using IRQ 10
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
parport_pc 00:0d: reported by Plug and Play BIOS
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr1
NET: Registered protocol family 23
wlan0: ethernet device 00:08:a1:6c:74:4d using NDIS driver: wlc811g, version: 0x10001, NDIS version: 0x500, vendor: 'Ralink Technology Inc.', 1814:0101.5.conf
ndiswrapper (set_auth_mode:642): setting auth mode to 3 failed (C0010015)
wlan0: encryption modes supported: WEP
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:03 failed with error -16
usbcore: registered new interface driver ndiswrapper
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
PCI: Found IRQ 10 for device 0000:00:13.0
PCI: Sharing IRQ 10 with 0000:00:0c.0
PCI: Sharing IRQ 10 with 0000:00:10.3
Adding 2104444k swap on /dev/sda5. Priority:-1 extents:1 across:2104444k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1219857485.076:2): type=1505 info="AppArmor initialized" pid=1543
powernow_k8: Unknown symbol acpi_processor_notify_smm
powernow_k8: Unknown symbol acpi_processor_unregister_performance
powernow_k8: Unknown symbol acpi_processor_register_performance
powernow_k7: Unknown symbol acpi_processor_notify_smm
powernow_k7: Unknown symbol acpi_processor_unregister_performance
powernow_k7: Unknown symbol acpi_processor_register_performance
acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
acpi_cpufreq: Unknown symbol acpi_processor_register_performance
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
audit(1219850307.848:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
audit(1219850307.848:4): audit_pid=2913 old=0 by auid=4294967295
bootsplash: status on console 0 changed to on
Code:
Micha:~ # ndiswrapper -m
module configuration already contains alias directive
module configuration already contains alias directive
module configuration already contains alias directive
module configuration already contains alias directive
Code:
Micha:~ # ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:42 errors:0 dropped:0 overruns:0 frame:0
TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2708 (2.6 Kb) TX bytes:2708 (2.6 Kb)
Code:
Micha:~ # ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:08:A1:6C:74:4D
inet addr:192.168.178.111 Bcast:192.168.178.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31 errors:0 dropped:0 overruns:0 frame:0
TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3255 (3.1 Kb) TX bytes:5773 (5.6 Kb)
Interrupt:10 Memory:e8100000-e8102000
Code:
Micha:~ # iwconfig wlan0
wlan0 IEEE 802.11b ESSID:"eben_meine" Nickname:"Micha"
Mode:Managed Frequency:2.462 GHz Access Point: 00:15:0C:10:B0:55
Bit Rate=11 Mb/s Tx-Power:20 dBm Sensitivity=-100 dBm
RTS thr=2347 B Fragment thr=2346 B
Encryption key:*WEP-Schlüsseö* Security mode:restricted
Power Management:off
Link Quality:54/100 Signal level:-61 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Code:
Micha:~ # ping 192.168.178.1
PING 192.168.178.1 (192.168.178.1) 56(84) bytes of data.
64 bytes from 192.168.178.1: icmp_seq=1 ttl=64 time=11.2 ms
64 bytes from 192.168.178.1: icmp_seq=2 ttl=64 time=2.04 ms
64 bytes from 192.168.178.1: icmp_seq=3 ttl=64 time=2.10 ms
--- 192.168.178.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 2.049/5.133/11.247/4.323 ms
Code:
Micha:~ # traceroute 192.168.178.1
traceroute to 192.168.178.1 (192.168.178.1), 30 hops max, 40 byte packets
1 fritz.fonwlan.box (192.168.178.1) 4.273 ms 0.000 ms 4.179 ms
Code:
Micha:~ # traceroute fritz.fonwlan.box
traceroute to fritz.fonwlan.box (192.168.178.1), 30 hops max, 40 byte packets
1 fritz.fonwlan.box (192.168.178.1) 0.000 ms 0.441 ms 0.118 ms
Code:
Micha:~ # ping www.suse.de
connect: Network is unreachable
Code:
Micha:~ # traceroute www.suse.de
traceroute to www.suse.de (195.135.220.3), 30 hops max, 40 byte packets
Unable to connect to 195.135.220.3: Network is unreachable
Ich bedanke mich schon jetzt für eure Bemühungen und Hilfe.
Falls ich aus Versehen noch einmal einen Thread eröffnet habe, der schon vorhanden ist, bitte ich um Entschuldigung und einen kleinen Hinweis, wohin mein Anliegen verschoben wurde.
Mit besten Grüßen