magic_halli
Hacker
Hi,
ich habe auf einem Suse10.1-Rechner den
Hylafax
capy4linux
capi4hylafax
und eine AVM Fritz!Card ISDN PCI (+entsprechenden fcpci-AVM-Treiber) installiert.
Der Faxempfang funktioniert erstmal soweit - nur der Faxversand geht nicht, d.h. es kommt beim Empfänger nichts an!!! Die Frage ist nur, warum?!?!
/etc/config.faxCAPI:.
/var/spool/fax/etc/config:.
ein faxstat -v bringt:.
ein capiinfo zeigt:.
Ich habe 2 Varianten zum Faxsenden vom Rechner aus versucht.
1.Variante:
Das /var/log/capifax.log zeigt hierzu:
und /var/log/isdn.log zeigt hierzu:
Am Faxgerät kommt aber leider keinerlei Fax an!!!
2.Variante:
Das /var/log/capifax.log zeigt hierzu:
und /var/log/isdn.log zeigt hierzu:
Auch hier kommt am Faxgerät nichts an!
Ich verstehe das nicht und weiß auch nicht, wo ich zur Fehlersuche noch ansetzen soll/kann.
Habt ihr Tips/Tricks/Ratschläge für mich parat?ß
Danke und Gruß
ich habe auf einem Suse10.1-Rechner den
Hylafax
capy4linux
capi4hylafax
und eine AVM Fritz!Card ISDN PCI (+entsprechenden fcpci-AVM-Treiber) installiert.
Der Faxempfang funktioniert erstmal soweit - nur der Faxversand geht nicht, d.h. es kommt beim Empfänger nichts an!!! Die Frage ist nur, warum?!?!
/etc/config.faxCAPI:.
Code:
SpoolDir: /var/spool/fax
FaxRcvdCmd: /var/spool/fax/bin/faxrcvd
FaxReceiveUser: fax
FaxReceiveGroup: dialout
LogFile: /var/log/capifax.log
LogTraceLevel: 4
LogFileMode: 0600
{
HylafaxDeviceName: faxCAPI
RecvFileMode: 0666
FAXNumber: +49.xxxxx.46015
LocalIdentifier: "AVM CAPI4HylaFAX"
MaxConcurrentRecvs: 2
# ----------- outgoing params -----------
OutgoingController: 1
OutgoingMSN: 15
SuppressMSN: 0
NumberPrefix:
# NumberPlusReplacer: "00"
UseISDNFaxService: 1
RingingDuration: 0
# ----------- incoming params -----------
{
Controller: 1
AcceptSpeech: 0
UseDDI: 0
DDIOffset: "12345"
DDILength: 3
IncomingDDIs:
IncomingMSNs: 15,16,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90
AcceptGlobalCall: 1
}
}
/var/spool/fax/etc/config:.
Code:
LogFacility: daemon
CountryCode: 49
AreaCode: xxxxx (Anm.: ohne führende 0)
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: "etc/dialrules"
ServerTracing: 1
SessionTracing: 0xffffffff
MaxSendPages: 30
SendFaxCmd: /var/spool/fax/bin/faxsend
ein faxstat -v bringt:.
Code:
lto:~ # faxstat -v
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 lto.firma.local server (HylaFAX (tm) Version 4.2.5) ready.
-> USER root
230 User root logged in.
-> PORT 127,0,0,1,26,40
200 PORT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on lto.firma.local: Running
Modem faxCAPI (+49.xxxxx.46015): Running and idle
226 Transfer complete.
Code:
lto:~ # capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-07 (49.23)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
Ich habe 2 Varianten zum Faxsenden vom Rechner aus versucht.
1.Variante:
Code:
lto:/var/spool/fax/sendq # c2faxsend -f G3 -v -d 46011 testsend.tif
The config file is /etc/config.faxCAPI.
C4H-Version 01.03.00 (64Bit).
Try to connect to fax number 46011 in G3 mode on controller 1.
Dial and starting transfer of G3-File testsend.tif with fine resolution.
Connection dropped with Reason 0x3490 (Normal call clearing).
You have new mail in /var/spool/mail/root
Code:
Jul 04 10:17:12.44: [10636]: CapiFaxSend - INFO:
C4H-Version 01.03.00 (64Bit).
Jul 04 10:17:12.45: [10636]: CapiFaxSend - INFO: Try to connect to fax number 46011 in G3 mode on controller 1.
Jul 04 10:17:12.45: [10636]: CapiFaxSend - INFO: Dial and starting transfer of G3-File testsend.tif with fine resolution.
Jul 04 10:17:19.18: [10636]: CapiFaxSend - INFO: Connection dropped with Reason 0x3490 (Normal call clearing).
Code:
Jul 4 10:17:12 2008|+49xxxxx15 |+49xxxxx46011 | 0| 0|1215159432| -1|O| 16| 0| 0|3.2|1|0|0.062|EUR|0| 33| -1|
2.Variante:
Code:
lto:/var/spool/fax/sendq # sendfax -n -d 46011 testsend.tif
request id is 41 (group id 41) for host localhost (1 file)
Code:
Jul 04 10:21:13.67: [10653]: CapiFaxSend - INFO:
C4H-Version 01.03.00 (64Bit).
Jul 04 10:21:13.67: [10653]: CapiFaxSend - INFO: SESSION BEGIN 000000041 +49.xxxxx.46015
Jul 04 10:21:13.67: [10653]: CapiFaxSend - INFO: SEND FAX: JOB 41 DEST 46011 COMMID 000000073
Jul 04 10:21:13.67: [10653]: CapiFaxSend - INFO: Try to connect to fax number 46011 in Hylafax mode on controller 1.
Jul 04 10:21:13.67: [10653]: CapiFaxSend - INFO: Dial and starting transfer of TIFF-File docq/doc70.tif;30 with normal resolution.
Jul 04 10:21:20.20: [10653]: CapiFaxSend - INFO: Connection dropped with Reason 0x3490 (Normal call clearing).
Code:
Jul 4 10:21:13 2008|+49xxxxx15 |+49xxxxx46011 | 0| 0|1215159673| -1|O| 16| 0| 0|3.2|1|0|0.062|EUR|0| 33| -1|
Ich verstehe das nicht und weiß auch nicht, wo ich zur Fehlersuche noch ansetzen soll/kann.
Habt ihr Tips/Tricks/Ratschläge für mich parat?ß
Danke und Gruß