Hallo,
hab folgendes Problem:
Grub starte mein WinXP nicht. Habe 2 Festplatten, als 1. Samsung-SP1654N und als 2. Samsung-HD250HJ
Hab OpenSuse 10.3 auf /dev/sdb6 und WinXP auf /dev/sdb1. Die erst Festplatte sda (Samsung-SP1654N) ist nur für Daten.
Suse starten ganz normal. Wenn ich Win im Grubmenü auswähle bleibt Grub dann stehen und gibt die Meldung:
Booting command-list
rootnoverify (hd1,0)
chainloader (hd1,0)+1
Dann geht nur noch strg+alt+entf.
Meine Einstellungen:
Hab schon alle möglichen Einstellungen bei rootnoverify und chainloader probiert, hat aber noch nichts geklappt.
Es ging aber schon mal. Vielleicht ist da mal ne Einstellung ausversehen verstellt wurden?
Wenn mir jemand helfen könnte, das wäre klasse.
Danke
Gruß
Rainer
hab folgendes Problem:
Grub starte mein WinXP nicht. Habe 2 Festplatten, als 1. Samsung-SP1654N und als 2. Samsung-HD250HJ
Hab OpenSuse 10.3 auf /dev/sdb6 und WinXP auf /dev/sdb1. Die erst Festplatte sda (Samsung-SP1654N) ist nur für Daten.
Suse starten ganz normal. Wenn ich Win im Grubmenü auswähle bleibt Grub dann stehen und gibt die Meldung:
Booting command-list
rootnoverify (hd1,0)
chainloader (hd1,0)+1
Dann geht nur noch strg+alt+entf.
Meine Einstellungen:
Code:
fdisk -l:
Platte /dev/sda: 160.0 GByte, 160041885696 Byte
255 heads, 63 sectors/track, 19457 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000001
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 1 19457 156288321 83 Linux
Platte /dev/sdb: 250.0 GByte, 250059350016 Byte
255 heads, 63 sectors/track, 30401 cylinders
Units = Zylinder of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0cb9ad1f
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 * 1 4448 35728528+ 7 HPFS/NTFS
/dev/sdb2 4449 30401 208467472+ f W95 Erw. (LBA)
/dev/sdb5 4449 4710 2104452 82 Linux Swap / Solaris
/dev/sdb6 4711 7321 20972826 83 Linux
/dev/sdb7 7322 30401 185390068+ 83 Linux
Code:
cat /etc/fstab
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part7 /home ext3 acl,user_xattr 1 2
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part6 / ext3 acl,user_xattr 1 1
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part5 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs devgid=1000,devmode=0664 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part1 /windows ntfs-3g users,gid=users,fmask=133,dmask=022,locale=de_DE.UTF-8 0 0
/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1654NS0GEJ1EL401362-part1 /mnt/disk ext3 defaults 1 2
Code:
cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Fr Apr 4 17:58:37 CEST 2008
default 0
timeout 8
gfxmenu (hd1,5)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.22.17-0.1
root (hd1,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part6 vga=0x31a resume=/dev/sdb5 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.22.17-0.1
root (hd1,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part6 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-default
###Don't change this comment - YaST2 identifier: Original name: linux-2.6.22.17-0.1-bigsmp###
title openSUSE 10.3
root (hd1,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-bigsmp root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part6 vga=0x31a resume=/dev/sdb5 splash=silent showopts
initrd /boot/initrd-2.6.22.17-0.1-bigsmp
###Don't change this comment - YaST2 identifier: Original name: failsafe-2.6.22.17-0.1-bigsmp###
title Failsafe -- openSUSE 10.3
root (hd1,5)
kernel /boot/vmlinuz-2.6.22.17-0.1-bigsmp root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part6 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
initrd /boot/initrd-2.6.22.17-0.1-bigsmp
###Don't change this comment - YaST2 identifier: Original name: Kernel-2.6.22.17-0.1-default###
title Kernel-2.6.22.17-0.1-default
root (hd1,5)
configfile /boot/grub/menu.lst
configfile /boot/grub/menu.lst
configfile /boot/grub/menu.lst
configfile /boot/grub/menu.lst
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd1,0)
chainloader (hd1,0)+1
###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN
root (hd1,5)
kernel /boot/xen.gz
module /boot/vmlinuz-xen root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD250HJS0URJDRP808309-part6 vga=0x31a resume=/dev/sdb5 splash=silent showopts
module /boot/initrd-xen
Code:
cat /boot/grub/device.map
(hd0) /dev/sda
(hd2) /dev/sdg
(hd1) /dev/sdb
Hab schon alle möglichen Einstellungen bei rootnoverify und chainloader probiert, hat aber noch nichts geklappt.
Es ging aber schon mal. Vielleicht ist da mal ne Einstellung ausversehen verstellt wurden?
Wenn mir jemand helfen könnte, das wäre klasse.
Danke
Gruß
Rainer