revealed
Guru
Hallo!
Falls ich im Falschen Topic gelandet bin sorry im Vorraus!
Folgendes Problem:
Beide SATA's hängen am "ICH" im BIOS stehen die Beiden von der Konfiguration her auf "IDE". Das heißt ich verwende kein AHCI aus kompatibilitätsgründen.
Alle paar mal Herunterfahren, kann die Festplatte nicht unmounted werden, weil: (Vermutung)
Sie bleibt im Standby hängen?!?
Ich hab 2 SATA Festplatten verbaut. Eine davon schläft gern mal ein, weil SuSE auf der anderen installiert ist und darauf die meisten Zugriffe erfolgen.
Jetzt kommt es vor, dass SuSE nicht vollständig herunterfährt.
Und zwar äußert sich das darin, dass das System bis zu dem Satz bei dem der PC normalerweise abschaltet runterfährt, dann aber stehenbleibt.
Wenn man den PC dann mittels "reset" neustartet (Warmstart), läuft eine Festplatte hörbar frisch an. Als würde sie aus dem Standby erwachen.
Bitte um Hilfe!
Edit: Weitere Details zu den HDD's nach jeweils einem smartctl --test=long:
(sda)
(sdb)
/Edit
Gruß
R
Falls ich im Falschen Topic gelandet bin sorry im Vorraus!
Folgendes Problem:
Code:
wild-thing:/home/disk # lspci |egrep SATA
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
Code:
wild-thing:/home/disk # uname -rio
2.6.22.13-0.3-default i386 GNU/Linux
wild-thing:/home/disk # cat /etc/SuSE-release
openSUSE 10.3 (i586)
VERSION = 10.3
Beide SATA's hängen am "ICH" im BIOS stehen die Beiden von der Konfiguration her auf "IDE". Das heißt ich verwende kein AHCI aus kompatibilitätsgründen.
Alle paar mal Herunterfahren, kann die Festplatte nicht unmounted werden, weil: (Vermutung)
Sie bleibt im Standby hängen?!?
Ich hab 2 SATA Festplatten verbaut. Eine davon schläft gern mal ein, weil SuSE auf der anderen installiert ist und darauf die meisten Zugriffe erfolgen.
Jetzt kommt es vor, dass SuSE nicht vollständig herunterfährt.
Und zwar äußert sich das darin, dass das System bis zu dem Satz bei dem der PC normalerweise abschaltet runterfährt, dann aber stehenbleibt.
Wenn man den PC dann mittels "reset" neustartet (Warmstart), läuft eine Festplatte hörbar frisch an. Als würde sie aus dem Standby erwachen.
Bitte um Hilfe!
Code:
wild-thing:/home/disk # hdparm -Tt /dev/sda && hdparm -Tt /dev/sdb && hddtemp /dev/sda /dev/sdb
/dev/sda:
Timing cached reads: 6286 MB in 2.00 seconds = 3146.13 MB/sec
Timing buffered disk reads: 222 MB in 3.03 seconds = 73.37 MB/sec
/dev/sdb:
Timing cached reads: 8020 MB in 2.00 seconds = 4014.70 MB/sec
Timing buffered disk reads: 214 MB in 3.02 seconds = 70.86 MB/sec
/dev/sda: ST3808110AS: 30°C
/dev/sdb: ST3808110AS: 32°C
wild-thing:/home/disk #
Edit: Weitere Details zu den HDD's nach jeweils einem smartctl --test=long:
(sda)
Code:
wild-thing:/home/disk # smartctl -a /dev/sda
smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9 family
Device Model: ST3808110AS
Serial Number: 5LR705ZC
Firmware Version: 3.AAE
User Capacity: 80.026.361.856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Dec 19 21:15:20 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 096 006 Pre-fail Always - 208920187
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 979
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 224040250
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8595
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 747
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 069 048 045 Old_age Always - 555089951
194 Temperature_Celsius 0x0022 031 052 000 Old_age Always - 31 (Lifetime Min/Max 0/13)
195 Hardware_ECC_Recovered 0x001a 054 045 000 Old_age Always - 151912723
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 8594 -
# 2 Short offline Completed without error 00% 7082 -
# 3 Short offline Completed without error 00% 4440 -
# 4 Extended offline Completed without error 00% 4440 -
# 5 Short offline Completed without error 00% 3549 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9 family
Device Model: ST3808110AS
Serial Number: 4LS2WX2A
Firmware Version: 3.AAH
User Capacity: 80.026.361.856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Dec 19 21:04:49 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 088 006 Pre-fail Always - 79012167
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1006
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 348857377
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7345
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 746
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 067 047 045 Old_age Always - 571998241
194 Temperature_Celsius 0x0022 033 053 000 Old_age Always - 33 (Lifetime Min/Max 0/16)
195 Hardware_ECC_Recovered 0x001a 048 046 000 Old_age Always - 139061398
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 7345 -
# 2 Short offline Completed without error 00% 6144 -
# 3 Short offline Completed without error 00% 2194 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gruß
R