Hallo Leute!
Wir betreiben einen Rechner unter Suse 8.2 mit einem
frisch compilierten Kernel 2.6.5.
Das System bootet prima hoch und laeuft sehr stabil,
doch finden sich im boot.msg File diese Zeilen:
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<4>scsi_mod: unsupported module, tainting kernel.
<5>SCSI subsystem initialized
<4>sd_mod: unsupported module, tainting kernel.
<4>reiserfs: unsupported module, tainting kernel.
<4>sym53c8xx: unsupported module, tainting kernel.
<6>sym0: <875> rev 0x4 at pci 0000:01:09.0 irq 11
<4>sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
<5>sym0: SCSI BUS has been reset.
<6>scsi0 : sym-2.1.18i
<6>sym0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
<6>scsi scan: 255 byte inquiry failed with code 458752. Consider BLIST_INQUIRY_36 for this device
<5> Vendor: COMPAQ Model: WDE4360W Rev: 1.52
<5> Type: Direct-Access ANSI SCSI revision: 02
<6>sym0:0:0: tagged command queuing enabled, command queue depth 16.
Was mich stoert sind diese "unsupported module, tainting kernel" Meldungen
(scsi_mod, sd_mod reiserfs).
Wie gesagt, der Rechner bootet dann ohne weitere Fehler hoch,
erkennt alle H/W und rennt ganz prima!
Wer weiss, was es mit diesen Meldungen auf sich hat?
Danke und mfG
RainerB.
Wir betreiben einen Rechner unter Suse 8.2 mit einem
frisch compilierten Kernel 2.6.5.
Das System bootet prima hoch und laeuft sehr stabil,
doch finden sich im boot.msg File diese Zeilen:
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<4>scsi_mod: unsupported module, tainting kernel.
<5>SCSI subsystem initialized
<4>sd_mod: unsupported module, tainting kernel.
<4>reiserfs: unsupported module, tainting kernel.
<4>sym53c8xx: unsupported module, tainting kernel.
<6>sym0: <875> rev 0x4 at pci 0000:01:09.0 irq 11
<4>sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
<5>sym0: SCSI BUS has been reset.
<6>scsi0 : sym-2.1.18i
<6>sym0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
<6>scsi scan: 255 byte inquiry failed with code 458752. Consider BLIST_INQUIRY_36 for this device
<5> Vendor: COMPAQ Model: WDE4360W Rev: 1.52
<5> Type: Direct-Access ANSI SCSI revision: 02
<6>sym0:0:0: tagged command queuing enabled, command queue depth 16.
Was mich stoert sind diese "unsupported module, tainting kernel" Meldungen
(scsi_mod, sd_mod reiserfs).
Wie gesagt, der Rechner bootet dann ohne weitere Fehler hoch,
erkennt alle H/W und rennt ganz prima!
Wer weiss, was es mit diesen Meldungen auf sich hat?
Danke und mfG
RainerB.