Battery 1: charging, 100%, rate information unavailable.
Thermal 1: ok, 48.0 degrees C
Thermal 2: ok, 48.0 degrees C
AC Adapter 1: on-line
Ja, mußt Du, zumal Du vorher eh' erstmal sensors-detect ausführen mußt.oder muß ich die Konsole aufrufen
towo2099 schrieb:Ja, mußt Du, zumal Du vorher eh' erstmal sensors-detect ausführen mußt.oder muß ich die Konsole aufrufen
Wenn Du was Grafisches haben willst, nimm KSensors.
Kann es sein das da ein Prozessor nach einem neuem Lüfter verlangt?susevm:~ # /etc/init.d/lm_sensors status
w83697hf-isa-0290
Adapter: ISA adapter
VCore: +1.58 V (min = +1.71 V, max = +1.89 V) ALARM
+3.3V: +3.26 V (min = +3.14 V, max = +3.47 V)
+5V: +5.05 V (min = +4.76 V, max = +5.24 V)
+12V: +12.22 V (min = +10.82 V, max = +13.19 V)
-12V: -14.91 V (min = -13.18 V, max = -10.80 V) ALARM
-5V: -7.71 V (min = -5.25 V, max = -4.75 V) ALARM
V5SB: +5.54 V (min = +4.76 V, max = +5.24 V) ALARM
VBat: +0.06 V (min = +2.40 V, max = +3.60 V) ALARM
fan1: 3325 RPM (min = 5113 RPM, div = 2) ALARM
fan2: 0 RPM (min = 337500 RPM, div = 2) ALARM
temp1: +71 C (high = +32 C, hyst = +14 C) sensor = thermistor ALARM
temp2: +32.0 C (high = +80 C, hyst = +75 C) sensor = thermistor
alarms:
beep_enable:
Sound alarm enabled