• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

KInternet Einwahlprobleme

blossom

Newbie
Seit etwa einem halben Jahr benutze ich Suse 9.1 Prof auf meinem Rechner und wähle mich über KInternet ein, um meine DSL-Flatrate auszubeuten :)

Seit etwa 6 Wochen passiert es mir, daß ich mich gestern noch einwählen konnte und heute schonwieder nicht - es kommt einfach keine Verbindung zustande - eine richtige Fehlermeldung gibt es leider nicht.

Mein Provider ist 1&1 - der hat bisher absolut keine Probs gemacht.

Wenn ich mir im YAST unter "Netzwerkgeräte" meine DSL-Konfiguration anschaue, nix ändere und dann noch einmal versuche mich einzuwählen, klappt es in 98% der Fälle....

Heute ist mir dann beim Hochfahren das hier aufgefallen:
eth0 interface could not be set up failed
dsl0 failed
dsl0 Startmode is "manual" skipped

Scheinbar wird wohl das DSL Modem nicht immer gefunden?

Das hier ist die Konfiguration meiner Netzwerkkarte, stimmt da irgendwas nicht?
linux:/home/SHe # ifconfig
eth0 Protokoll:Ethernet Hardware Adresse 00:40:F6:2C:CC:AC
inet6 Adresse: fe80::240:f6ff:fe2c:ccac/64 Gültigkeitsbereich:Verbindung
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2553 errors:0 dropped:0 overruns:0 frame:0
TX packets:2631 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:2 Sendewarteschlangenlänge:1000
RX bytes:1486400 (1.4 Mb) TX bytes:317936 (310.4 Kb)
Interrupt:9 Basisadresse:0x3000

lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:564 errors:0 dropped:0 overruns:0 frame:0
TX packets:564 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:46626 (45.5 Kb) TX bytes:46626 (45.5 Kb)

ppp0 Protokoll:punkt-zu-Punkt Verbindung
inet Adresse:80.134.65.146 P-z-P:217.5.98.59 Maske:255.255.255.255
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:2435 errors:0 dropped:0 overruns:0 frame:0
TX packets:2509 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:3
RX bytes:1424894 (1.3 Mb) TX bytes:253237 (247.3 Kb)

route
linux:/home/SHe # route
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
217.5.98.59 * 255.255.255.255 UH 0 0 0 ppp0
loopback * 255.0.0.0 U 0 0 0 lo
default 217.5.98.59 0.0.0.0 UG 0 0 0 ppp0

Help - please.....
 
Hey

ich habe auch keine Ahnung. Vielleicht deine eth0 defekt oder ein Wackler. Er findet sie ja nicht so richtig beim hochfahren.

Wiso hat dein eth0 kein IP Adresse v4 (nur eine v6, inet6)

Poste mal die /var/log/boot.msg

By Huflatisch
 
OP
blossom

blossom

Newbie
Ui, die is aber ganz schön lang...

[edit]Heute ging es übrigens mal wieder...[/edit]

Inspecting /boot/System.map-2.6.4-52-default
Loaded 23439 symbols from /boot/System.map-2.6.4-52-default.
Symbols match kernel version 2.6.4.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.4-52-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Wed Apr 7 02:08:30 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
<4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
<4> BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
<4> BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
<4> BIOS-e820: 000000001ff00000 - 0000000020000000 (usable)
<4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<5>501MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>512MB LOWMEM available.
<4>On node 0 totalpages: 131072
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 126976 pages, LIFO batch:16
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI present.
<6>ACPI: RSDP (v000 PTLTD ) @ 0x000f7c10
<6>ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fefbe4d
<6>ACPI: FADT (v001 FSC D132X 0x06040000 0x000f4240) @ 0x1fefbe7d
<6>ACPI: MADT (v001 FSC APIC 0x06040000 CSF 0x00000000) @ 0x1fefef7e
<6>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fefefd8
<6>ACPI: DSDT (v001 FSC D132X 0x06040000 MSFT 0x0100000c) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0xf008
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hda7 vga=0x317 desktop resume=/dev/hda6 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order 12: 32768 bytes)
<4>CKRM Initialized
<4>Detected 1798.598 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<6>Memory: 514896k/524288k available (1969k kernel code, 8532k reserved, 677k data, 212k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 3555.32 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Initializing.
<6>SELinux: Starting in permissive mode
<6>There is already a security framework initialized, register_security failed.
<6>Failure registering capabilities with the kernel
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1112k freed
<7>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 256K
<7>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU#0: Thermal monitoring enabled
<4>CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>do_initcalls
<4>init_elf_binfmt
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd963, last bus=2
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<6>No customized DSDT found!
<4>ACPI: IRQ9 SCI: Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4> ... the first call_usermodehelper: pci_bus
<4>Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
<4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xe0807000, size 16384k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=0
<6>vesafb: protected mode interface info at c000:bd00
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>Simple Boot Flag at 0x69 set to 0x1
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<4>Initial HugeTLB pages allocated: 0
<6>ikconfig 0.7 with /proc/config*
<5>VFS: Disk quotas dquot_6.5.1
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 37245 bytes, found (1024x768, 17142 bytes, v3).
<4>Console: switching to colour frame buffer device 118x41
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>PCI: Enabling device 0000:02:0f.0 (0104 -> 0105)
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH2: IDE controller at PCI slot 0000:00:1f.1
<6>ICH2: chipset revision 18
<6>ICH2: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: ST360020A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
<4>hdd: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
<6> hda: hda1 hda2 < hda5 hda6 hda7 >
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: resuming from /dev/hda6
<4>Resuming from device hda6
<3>Resume Machine: This is normal swap space
<7>PM: Reading pmdisk image.
<7>PM: Resume from disk failed.
<6>ACPI: (supports S0 S1 S4 S5)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<5>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda7: using ordered data mode
<5>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda7: checking transaction log (hda7)
<5>ReiserFS: hda7: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 212k freed
<6>Adding 1032656k swap on /dev/hda6. Priority:42 extents:1
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
<6>NTFS driver 2.1.6 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<6>subfs 0.9
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sun Feb 6 11:30:38 2005

<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Activating swap-devices in /etc/fstab...
doneChecking root file system...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x307 of format 3.6 with standard journal
Blocks (total/free): 5728576/4525858 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
done<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
doneSetting updone
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
/dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,iocharset=utf8)
/dev/hdd on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/hdc on /media/dvd type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/fd0 on /media/floppy type subfs (rw,nosuid,nodev,sync,fs=floppyfss,procuid)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
find: /tmp/ssh-*: No such file or directory
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Creating /var/log/boot.msg
done<notice>killproc: kill(264,29)
<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(264,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Sun Feb 6 10:30:23 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hotplug SuSEfirewall2_init)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Initializing random number generatordone
Starting Firewall Initialization (phase 1 of 3) done
<notice>exit status of (random isdn hotplug SuSEfirewall2_init) is (0 0 0 0)
<notice>start services (coldplug)
coldplug scanning input: ***done
scanning pci: ****.***WW****Wdone
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: KTI ET32P2
eth0 configuration: eth-id-00:40:f6:2c:cc:ac
eth0 (DHCP) . . . modprobe: FATAL: Error inserting hw_random (/lib/modules/2.6.4-52-default/kernel/drivers/char/hw_random.ko): No such device


. . no IP address yet... backgrounding.
waiting
<notice>checkproc: /sbin/dhcpcd 2060
Waiting for mandatory devices: eth-id-00:40:f6:2c:cc:ac
11 <notice>checkproc: /sbin/dhcpcd 2060
9 <notice>checkproc: /sbin/dhcpcd 2060
8 <notice>checkproc: /sbin/dhcpcd 2060
5 <notice>checkproc: /sbin/dhcpcd 2060
3 <notice>checkproc: /sbin/dhcpcd 2060
2 <notice>checkproc: /sbin/dhcpcd 2060
0 <notice>checkproc: /sbin/dhcpcd 2060

eth0 interface could not be set up
failed dsl0
dsl0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>exit status of (network) is (7)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (SuSEfirewall2_setup)
Starting Firewall Initialization (phase 2 of 3) done
<notice>exit status of (SuSEfirewall2_setup) is (0)
<notice>start services (splash_early smbfs resmgr portmap)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting resource managerdone
Mount SMB/ CIFS File Systems unused
Starting RPC portmap daemondone
<notice>exit status of (splash_early smbfs resmgr portmap) is (0 6 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd smpppd powersaved fbset alsasound)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=33 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved done
Starting sound driver: intel8x0done
Restoring the previous sound settingdone
<notice>exit status of (sshd smpppd powersaved fbset alsasound) is (0 0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0)
<notice>start services (nscd hwscan cron)
Starting hardware scan on boot<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=42 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=41 SHLVL=2 splash=silent sscripts=47 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (xdm splash_late)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=45 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=118 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=41 SHLVL=2 XCURSOR_THEME=crystalwhite no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=silent sscripts=47 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm splash_late) is (0 0)
<notice>start services (SuSEfirewall2_final)
Starting Firewall Initialization (phase 3 of 3) done
<notice>exit status of (SuSEfirewall2_final) is (0)
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(944,3)
 
Hey

Hier isser doch
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: KTI ET32P2
eth0 configuration: eth-id-00:40:f6:2c:cc:ac
eth0 (DHCP) . . . modprobe: FATAL: Error inserting hw_random (/lib/modules/2.6.4-52-default/kernel/drivers/char/hw_random.ko): No such device


. . no IP address yet... backgrounding.
waiting
<notice>checkproc: /sbin/dhcpcd 2060
Waiting for mandatory devices: eth-id-00:40:f6:2c:cc:ac
11 <notice>checkproc: /sbin/dhcpcd 2060
9 <notice>checkproc: /sbin/dhcpcd 2060
8 <notice>checkproc: /sbin/dhcpcd 2060
5 <notice>checkproc: /sbin/dhcpcd 2060
3 <notice>checkproc: /sbin/dhcpcd 2060
2 <notice>checkproc: /sbin/dhcpcd 2060
0 <notice>checkproc: /sbin/dhcpcd 2060

eth0 interface could not be set up
failed dsl0
dsl0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>exit status of (network) is (7)

Kann es sein das du per dhcp auf die eth0 eine IP versuchst zu geben ???

Wenn das nicht ist, kann es sein das deine Treiber nicht passen. Versuche mal eine andere Karte reinzuhängen.

By Huflatisch
 
Das Problem habe ich auch. Das merkwürdige ist, das Kinternet immer eine Fehlermeldung bei "Verbindung herstellen" gibt, aber es nur machmal nicht funktioniert. Unter XP läufts übrigens Problemlos...
 

Arnd

Member
ich habe der eth0 eine feste ip gegeben z.b. 192.168.2.121
subnetmask 255.255.255.0 ( hängt am DSL Modem )

beim internen Netz habe ich die 192.168.0.1 255.255.255.0

Das funzt eigentlich ganz gut :D

Arnd
 
Oben