Mein Problem mit der PCMCIA-ISDN-Karte:
Beim Hochfahren des Notebooks ein hoher und ein tiefer Beep. Lt. man-page wird die Karte identifiziert, aber nicht richtig konfiguriert.
Aus man cardmgr: “Normally, when a card is identified, cardmgr will send a beep to the console. A beep is also generated when a card is successfully configured. A beep of lower pitch is generated if either of these steps fails. Ejecting a card produces a single beep.”
Bei der weiteren Suche bin ich folgende Hinweise gestoßen, weiß als Neuling aber nun nicht mehr weiter.
/var/log/boot.msg:
<notice>
Boot logging started on /dev/tty1(/dev/console) at Sat Jan 1 23:34:28 2005
Master Resource Control: previous runlevel: N, switching to runlevel: 5
start services (random pcmcia isdn SuSEfirewall2_init)Initializing random number generator done
Setting up ISDN card contr0 Teles PCMCIA done
Loading Driver contr0 hisax FATAL: Error inserting hisax (/lib/modules/2.6.8-24-default/kernel/drivers/isdn/hisax/hisax.ko): No such device failed
<notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=43 HOME=/ SHLVL=2 splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/sbin/cardmgr ]
Starting PCMCIA done
Starting Firewall Initialization (phase 1 of 3) cardmgr[3754]: socket 0: TELES S0/PC ISDN
cardmgr[3754]: get dev info on socket 0 failed: No such device
done
<notice>exit status of (random pcmcia isdn SuSEfirewall2_init) is (0 0 1 0)
/var/log/warn
Jan 1 23:32:05 linux kernel: Teles3: wrong HSCX versions check IO address
Jan 1 23:32:05 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
Jan 1 23:32:05 linux cardmgr[3736]: get dev info on socket 0 failed: No such device
Jan 1 23:34:58 linux kernel: HiSax: Teles PCMCIA ports 0-60 already in use
Jan 1 23:34:58 linux kernel: HiSax: Card Teles PCMCIA not installed !
Jan 1 23:34:58 linux kernel: Teles3: wrong HSCX versions check IO address
Jan 1 23:34:58 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
Systemprotokoll
Jan 1 23:34:58 linux kernel: HiSax: Linux Driver for passive ISDN cards
Jan 1 23:34:58 linux kernel: HiSax: Version 3.5 (module)
Jan 1 23:34:58 linux kernel: HiSax: Layer1 Revision 2.46.2.5
Jan 1 23:34:58 linux kernel: HiSax: Layer2 Revision 2.30.2.4
Jan 1 23:34:58 linux kernel: HiSax: TeiMgr Revision 2.20.2.3
Jan 1 23:34:58 linux kernel: HiSax: Layer3 Revision 2.22.2.3
Jan 1 23:34:58 linux kernel: HiSax: LinkLayer Revision 2.59.2.4
Jan 1 23:34:58 linux kernel: (teles_cs: looks like the 97 model)
Jan 1 23:34:58 linux kernel: teles: index 0x01: Vcc 5.0, irq 3, io 0x02f0-0x034f
Jan 1 23:34:58 linux kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Jan 1 23:34:58 linux kernel: HiSax: Teles IO driver Rev. 2.19.2.4
Jan 1 23:34:58 linux kernel: HiSax: Teles PCMCIA config irq:3 isac:0x330 cfg:0x0
Jan 1 23:34:58 linux kernel: HiSax: hscx A:0x2F0 hscx B:0x310
Jan 1 23:34:58 linux kernel: Teles3: ISAC version (ff): 2085 V2.3
Jan 1 23:34:58 linux kernel: Teles3: HSCX version A: ??? B: ???
Jan 1 23:34:58 linux kernel: Teles3: wrong HSCX versions check IO address
Jan 1 23:34:58 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
SuSE 9.2 auf Notebook Acer Aspire 1351 LC
PCMCIA-ISDN-Karte von Teles, wird von SuSE 9.2 unterstützt, Hotplug aktiviert, Karte und Provider mit YaST2 eingerichtet. Die Karte ist direkt am NTBA angeschlossen.
Was kann ich da tun? Was ist zu verändern?
Beim Hochfahren des Notebooks ein hoher und ein tiefer Beep. Lt. man-page wird die Karte identifiziert, aber nicht richtig konfiguriert.
Aus man cardmgr: “Normally, when a card is identified, cardmgr will send a beep to the console. A beep is also generated when a card is successfully configured. A beep of lower pitch is generated if either of these steps fails. Ejecting a card produces a single beep.”
Bei der weiteren Suche bin ich folgende Hinweise gestoßen, weiß als Neuling aber nun nicht mehr weiter.
/var/log/boot.msg:
<notice>
Boot logging started on /dev/tty1(/dev/console) at Sat Jan 1 23:34:28 2005
Master Resource Control: previous runlevel: N, switching to runlevel: 5
start services (random pcmcia isdn SuSEfirewall2_init)Initializing random number generator done
Setting up ISDN card contr0 Teles PCMCIA done
Loading Driver contr0 hisax FATAL: Error inserting hisax (/lib/modules/2.6.8-24-default/kernel/drivers/isdn/hisax/hisax.ko): No such device failed
<notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=43 HOME=/ SHLVL=2 splash=silent SPLASH=yes _=/sbin/startproc DAEMON=/sbin/cardmgr ]
Starting PCMCIA done
Starting Firewall Initialization (phase 1 of 3) cardmgr[3754]: socket 0: TELES S0/PC ISDN
cardmgr[3754]: get dev info on socket 0 failed: No such device
done
<notice>exit status of (random pcmcia isdn SuSEfirewall2_init) is (0 0 1 0)
/var/log/warn
Jan 1 23:32:05 linux kernel: Teles3: wrong HSCX versions check IO address
Jan 1 23:32:05 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
Jan 1 23:32:05 linux cardmgr[3736]: get dev info on socket 0 failed: No such device
Jan 1 23:34:58 linux kernel: HiSax: Teles PCMCIA ports 0-60 already in use
Jan 1 23:34:58 linux kernel: HiSax: Card Teles PCMCIA not installed !
Jan 1 23:34:58 linux kernel: Teles3: wrong HSCX versions check IO address
Jan 1 23:34:58 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
Systemprotokoll
Jan 1 23:34:58 linux kernel: HiSax: Linux Driver for passive ISDN cards
Jan 1 23:34:58 linux kernel: HiSax: Version 3.5 (module)
Jan 1 23:34:58 linux kernel: HiSax: Layer1 Revision 2.46.2.5
Jan 1 23:34:58 linux kernel: HiSax: Layer2 Revision 2.30.2.4
Jan 1 23:34:58 linux kernel: HiSax: TeiMgr Revision 2.20.2.3
Jan 1 23:34:58 linux kernel: HiSax: Layer3 Revision 2.22.2.3
Jan 1 23:34:58 linux kernel: HiSax: LinkLayer Revision 2.59.2.4
Jan 1 23:34:58 linux kernel: (teles_cs: looks like the 97 model)
Jan 1 23:34:58 linux kernel: teles: index 0x01: Vcc 5.0, irq 3, io 0x02f0-0x034f
Jan 1 23:34:58 linux kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Jan 1 23:34:58 linux kernel: HiSax: Teles IO driver Rev. 2.19.2.4
Jan 1 23:34:58 linux kernel: HiSax: Teles PCMCIA config irq:3 isac:0x330 cfg:0x0
Jan 1 23:34:58 linux kernel: HiSax: hscx A:0x2F0 hscx B:0x310
Jan 1 23:34:58 linux kernel: Teles3: ISAC version (ff): 2085 V2.3
Jan 1 23:34:58 linux kernel: Teles3: HSCX version A: ??? B: ???
Jan 1 23:34:58 linux kernel: Teles3: wrong HSCX versions check IO address
Jan 1 23:34:58 linux kernel: teles_cs: failed to initialize Teles PCMCIA -1 at i/o 0x2f0
SuSE 9.2 auf Notebook Acer Aspire 1351 LC
PCMCIA-ISDN-Karte von Teles, wird von SuSE 9.2 unterstützt, Hotplug aktiviert, Karte und Provider mit YaST2 eingerichtet. Die Karte ist direkt am NTBA angeschlossen.
Was kann ich da tun? Was ist zu verändern?