MerlinderZauberer
Newbie
Hallo,
ich beschäftige mich seit ca. 2 Wochen intensiv mit LinuxOpenSuse 11.0.
Mein Ziel ist es, einen Daten und Webserver einzurichten.
Nachdem ich nun einige Probleme und Einrichtungen tlw. mit Hilfe von Google gelöst habe, bin ich auf einen Fehler gestoßen, dessen bedeutung ich nicht wirklich verstehe.
Über KPowerSave habe ich versucht, meinen HP Compaq-Rechner (Baujahr 2004) in den Ruhuzustand bzw. StandBy-Modus zu versetzen (Suspend to Disk oder Suspent to Ram).
Leider bricht diese "Routine" (?) leider mit einer Fehlercodemeldung ab.
Bei Suspend to Disk Fehlercode 1
Bei Suspend to Ram Fehlercode 127
Nachdem ich mir dann die Logdatei angeschaut habe, bin ich zwar auf eine Fehlermeldung gestoßen, verstehe aber nicht ganz den Sinn, bzw. eine Lösungsmöglichkeit.
Durch Google konnte ich zumindest erfahren, das man ein Biosupdate durchführen soll, um eventuelle Probleme damit zu beheben.
Das habe ich dann auch getan, jedoch ergibt sich keine Verbesserung des Problem.
Auch das Umstellen von Parametern im Bios hat micr nicht weitergeholfen.
Hier mal der Auszug aus der Fehlerprotokollierung (Despent to Disk):
Weiß jemand Rat?
Merlin der Zauberer
ich beschäftige mich seit ca. 2 Wochen intensiv mit LinuxOpenSuse 11.0.
Mein Ziel ist es, einen Daten und Webserver einzurichten.
Nachdem ich nun einige Probleme und Einrichtungen tlw. mit Hilfe von Google gelöst habe, bin ich auf einen Fehler gestoßen, dessen bedeutung ich nicht wirklich verstehe.
Über KPowerSave habe ich versucht, meinen HP Compaq-Rechner (Baujahr 2004) in den Ruhuzustand bzw. StandBy-Modus zu versetzen (Suspend to Disk oder Suspent to Ram).
Leider bricht diese "Routine" (?) leider mit einer Fehlercodemeldung ab.
Bei Suspend to Disk Fehlercode 1
Bei Suspend to Ram Fehlercode 127
Nachdem ich mir dann die Logdatei angeschaut habe, bin ich zwar auf eine Fehlermeldung gestoßen, verstehe aber nicht ganz den Sinn, bzw. eine Lösungsmöglichkeit.
Durch Google konnte ich zumindest erfahren, das man ein Biosupdate durchführen soll, um eventuelle Probleme damit zu beheben.
Das habe ich dann auch getan, jedoch ergibt sich keine Verbesserung des Problem.
Auch das Umstellen von Parametern im Bios hat micr nicht weitergeholfen.
Hier mal der Auszug aus der Fehlerprotokollierung (Despent to Disk):
Code:
Sun Sep 7 20:28:06 CEST 2008: running hibernate hooks.
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/00clear =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/01logging =====
hibernate initiated: Sun Sep 7 20:28:06 CEST 2008
Module Size Used by
ip6t_LOG 23428 11
xt_tcpudp 19584 26
xt_pkttype 18304 5
ipt_LOG 22788 12
xt_limit 19076 23
i915 46464 2
drm 98200 3 i915
binfmt_misc 28040 1
snd_pcm_oss 64256 0
snd_mixer_oss 33408 1 snd_pcm_oss
snd_seq 73664 0
snd_seq_device 25100 1 snd_seq
edd 26440 0
microcode 30608 0
firmware_class 25984 1 microcode
ip6t_REJECT 21376 3
nf_conntrack_ipv6 33272 5
ipt_REJECT 20352 3
xt_state 18944 10
iptable_mangle 19712 0
iptable_nat 23688 0
nf_nat 35736 1 iptable_nat
iptable_filter 19840 1
ip6table_mangle 19584 0
nf_conntrack_netbios_ns 19200 0
nf_conntrack_ipv4 27652 8 iptable_nat,nf_nat
nf_conntrack 79188 6 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_netbios_ns,nf_conntrack_ipv4
ip_tables 30224 3 iptable_mangle,iptable_nat,iptable_filter
ip6table_filter 19712 1
ip6_tables 31376 3 ip6t_LOG,ip6table_mangle,ip6table_filter
x_tables 33668 11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
ipv6 281064 15 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
fuse 66332 1
loop 35332 0
dm_mod 78676 0
snd_intel8x0 50460 1
snd_ac97_codec 120868 1 snd_intel8x0
ac97_bus 18304 1 snd_ac97_codec
usbhid 60260 0
snd_pcm 100100 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
iTCO_wdt 28580 0
hid 53708 1 usbhid
snd_timer 40712 2 snd_seq,snd_pcm
thermal 39452 0
ppdev 25348 0
rtc_cmos 27168 0
iTCO_vendor_support 20228 1 iTCO_wdt
i2c_i801 26128 0
rtc_core 37148 1 rtc_cmos
tg3 128516 0
snd 79544 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
intel_agp 43460 1
button 25360 0
processor 67504 1 thermal
sr_mod 33320 1
ff_memless 21896 1 usbhid
rtc_lib 19328 1 rtc_core
soundcore 24264 1 snd
serio_raw 23428 0
cdrom 50588 1 sr_mod
parport_pc 55100 0
i2c_core 41108 1 i2c_i801
agpgart 50868 3 drm,intel_agp
snd_page_alloc 27400 2 snd_intel8x0,snd_pcm
shpchp 50196 0
parport 52948 2 ppdev,parport_pc
pci_hotplug 46116 1 shpchp
sg 52020 0
sd_mod 45208 6
ehci_hcd 52492 0
uhci_hcd 40848 0
usbcore 164684 4 usbhid,ehci_hcd,uhci_hcd
ext3 155784 4
mbcache 25348 1 ext3
jbd 73376 1 ext3
ata_piix 38404 6
libata 176220 1 ata_piix
scsi_mod 168308 4 sr_mod,sg,sd_mod,libata
dock 27536 1 libata
total used free shared buffers cached
Mem: 506852 484052 22800 0 15384 283196
-/+ buffers/cache: 185472 321380
Swap: 763048 16 763032
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/05led =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/06autofs =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/10NetworkManager =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/20reset-bluetooth =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/30s2disk-check =====
INFO: checking for suspend-to-disk prerequisites...
ERROR: no resume parameter on kernel commandline, can not suspend
WARNING: /var/run/pm-utils.inhibit will be created to prevent suspending!
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/45pcmcia =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/50modules =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/55battery =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/80acpi-fan =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/80videobios =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/94cpufreq =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/95led =====
===== Sun Sep 7 20:28:06 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/99Zgrub =====
INFO: running prepare-grub
Skipping grub entry #1, because it has the noresume option
running kernel is grub menu entry 0 (vmlinuz)
preparing boot-loader: selecting entry 0, kernel /boot/2.6.25.5-1.1-pae
grub-once: running '/usr/sbin/grubonce 0'
Using entry #0: openSUSE 11.0
time needed for sync: 0.8 seconds, time needed for grub: 0.0 seconds.
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/99info =====
Sun Sep 7 20:28:07 CEST 2008: done running hibernate hooks.
Sun Sep 7 20:28:07 CEST 2008: running thaw hooks.
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/99info =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/99Zgrub =====
INFO: running grub-once-restore
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/95led =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/94cpufreq =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/80videobios =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/80acpi-fan =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/55battery =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/50modules =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/45pcmcia =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/30s2disk-check =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/20reset-bluetooth =====
===== Sun Sep 7 20:28:07 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/10NetworkManager =====
===== Sun Sep 7 20:28:08 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/06autofs =====
===== Sun Sep 7 20:28:08 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/05led =====
===== Sun Sep 7 20:28:08 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/01logging =====
===== Sun Sep 7 20:28:08 CEST 2008: running hook: /usr/lib/pm-utils/sleep.d/00clear =====
Sun Sep 7 20:28:08 CEST 2008: done running thaw hooks.
Weiß jemand Rat?
Merlin der Zauberer