Hallo zusammen,
ich habe ein openSUSE 10.3 System mit KDE 3.5.8
ATI-Treiber 8.42.3 ist installiert.
Ich möchte gerne mal Compiz ausprobieren und habe deshalb folgende Anleitung durchgeführt.
http://de.opensuse.org/Compiz_Fusion
Nach dem aktivieren von XGL sind offensichtlich aber die ATI-Treiber nicht mehr geladen :
Wenn ich mit Xorg starte bringt die Ausgabe von fglrxinfo folgendes:
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X1800 Series
OpenGL version string: 2.0.6958 Release
Wenn ich mit XGL starte bringt die Ausgabe von fglrxinfo folgendes:
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (2.1 Mesa 6.5.3)
Wie kann das denn sein?
Was muss ich tun damit auch bei XGL die Treiber korrekt geladen werden?
Der Inhalt meiner xorg.conf sieht wie folgt aus:
ich habe ein openSUSE 10.3 System mit KDE 3.5.8
ATI-Treiber 8.42.3 ist installiert.
Ich möchte gerne mal Compiz ausprobieren und habe deshalb folgende Anleitung durchgeführt.
http://de.opensuse.org/Compiz_Fusion
Nach dem aktivieren von XGL sind offensichtlich aber die ATI-Treiber nicht mehr geladen :
Code:
gnome-xgl-switch --enable-xgl
Wenn ich mit Xorg starte bringt die Ausgabe von fglrxinfo folgendes:
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: Radeon X1800 Series
OpenGL version string: 2.0.6958 Release
Wenn ich mit XGL starte bringt die Ausgabe von fglrxinfo folgendes:
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (2.1 Mesa 6.5.3)
Wie kann das denn sein?
Was muss ich tun damit auch bei XGL die Treiber korrekt geladen werden?
Der Inhalt meiner xorg.conf sieht wie folgt aus:
Code:
# /.../
# SaX generated X11 config file
# Created on: 2007-06-28T00:42:11+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection
Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "logiclx300"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "ImPS/2 Logitech Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Modes"
Identifier "Modes[0]"
ModeLine "1280x1024" 169.2 1280 1376 1512 1744 1024 1025 1028 1078
ModeLine "1280x1024" 149.6 1280 1376 1512 1744 1024 1025 1028 1072
ModeLine "1280x1024" 128.9 1280 1368 1504 1728 1024 1025 1028 1066
ModeLine "1280x1024" 108.9 1280 1360 1496 1712 1024 1025 1028 1060
ModeLine "1024x768" 100.2 1024 1088 1200 1376 768 769 772 809
ModeLine "1024x768" 88.5 1024 1088 1200 1376 768 769 772 804
ModeLine "1024x768" 76.2 1024 1080 1192 1360 768 769 772 800
ModeLine "1024x768" 64.1 1024 1080 1184 1344 768 769 772 795
EndSection
Section "Monitor"
Identifier "Monitor[0]"
VendorName "IIYAMA"
ModelName "VISION MASTER PRO 450"
UseModes "Modes[0]"
DisplaySize 360 270
HorizSync 27.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device[0]"
Driver "fbdev"
VendorName "VESA"
BoardName "Framebuffer Graphics"
BusID "5:0:0"
Option "EnablePrivateBackZ" "no"
Option "KernelModuleParm" "agplock=0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "EnablePrivateBackZ" "no"
Option "KernelModuleParm" "agplock=0"
EndSection
Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
SubSection "Display"
Depth 24
Modes "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "default"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection