kde theme make install problem

Alles rund um die möglichen Desktopumgebungen wie KDE, Gnome, XFCE usw. die es unter Linux gibt

Moderator: Moderatoren

Antworten
specialistsfan
Newbie
Newbie
Beiträge: 5
Registriert: 14. Nov 2005, 17:29

kde theme make install problem

Beitrag von specialistsfan » 22. Nov 2005, 17:15

bin ein ziemlicher noob und wollte mir mal von kde-look.org
ein theme downloaden ich habe mir crystal 0.9.5 http://www.kde-look.org/content/show.php?content=13969 gezogen und wollte es installieren ... hab alles gemacht wie's in der install stand /crystal-0.9.5/configure --prefix=/opt/kde3/bin
make
make install

distclean-hdr:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 349):
-rm -f config.h stamp-h1


.NOEXPORT:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

# Not a target:
admin/mkinstalldirs:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

maintainer-clean-generic:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 643):
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)


no-final-install:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 784):
$(MAKE) install-am


ctags-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 416):
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done


/home/julius/crystal-0.9.5/aclocal.m4: /home/julius/crystal-0.9.5/configure.in /home/julius/crystal-0.9.5/acinclude.m4
# Implicit rule search has not been done.
# Last modified 2005-07-27 21:49:38
# File has been updated.
# Successfully updated.
# commands to execute (from `Makefile', line 332):
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)


# Not a target:
.texinfo.dvi:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(TEXI2DVI) $(TEXI2DVI_FLAGS) $<

# Not a target:
/home/julius/crystal-0.9.5/configure.in.in:
# Implicit rule search has been done.
# Last modified 2004-08-29 13:51:38
# File has been updated.
# Successfully updated.

config.status: /home/julius/crystal-0.9.5/configure
# Implicit rule search has not been done.
# Implicit/static pattern stem: `'
# Last modified 2005-11-19 18:03:25
# File has been updated.
# Successfully updated.
# automatic
# @ := config.status
# automatic
# % :=
# automatic
# * :=
# automatic
# + := /home/julius/crystal-0.9.5/configure
# automatic
# | :=
# automatic
# < := /home/julius/crystal-0.9.5/configure
# automatic
# ^ := /home/julius/crystal-0.9.5/configure
# automatic
# ? := /home/julius/crystal-0.9.5/configure
# variable set hash-table stats:
# Load=8/32=25%, Rehash=0, Collisions=1/11=9%
# commands to execute (from `Makefile', line 324):
$(SHELL) ./config.status --recheck


# Not a target:
.y.c:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(YACC.y) $<
mv -f y.tab.c $@

/home/julius/crystal-0.9.5/configure: /home/julius/crystal-0.9.5/configure.in /home/julius/crystal-0.9.5/aclocal.m4
# Implicit rule search has not been done.
# Last modified 2005-11-19 18:07:40
# File has been updated.
# Successfully updated.
# commands to execute (from `Makefile', line 328):
cd $(srcdir) && rm -f configure
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure


# Not a target:
.web.tex:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(WEAVE) $<

# Not a target:
.texi.info:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@

/home/julius/crystal-0.9.5/configure.in: /home/julius/crystal-0.9.5/configure.in.in /home/julius/crystal-0.9.5/subdirs
# Implicit rule search has not been done.
# Last modified 2005-07-27 21:49:35
# File has been updated.
# Successfully updated.
# commands to execute (from `Makefile', line 720):
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;


# Not a target:
admin/missing:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

# Not a target:
.DEFAULT:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

config.h: stamp-h1
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 335):
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi


nmcheck-am: nmcheck
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

check-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


pdf-am:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

install-data: install-data-recursive
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

clean-libtool:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 355):
-rm -rf .libs _libs


installcheck: installcheck-recursive
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

# Not a target:
admin/ltmain.sh:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

dist-hook:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 729):
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs


stamp-h1: /home/julius/crystal-0.9.5/config.h.in config.status
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 341):
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h


force-reedit:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 743):
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
cd $(top_srcdir) && perl admin/am_edit Makefile.in


bcheck: bcheck-recursive
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

# Not a target:
.tex.dvi:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(TEX) $<

# Not a target:
.cpp.o:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(COMPILE.cpp) $(OUTPUT_OPTION) $<

# Not a target:
.cpp:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(LINK.cpp) $^ $(LOADLIBES) $(LDLIBS) -o $@

clean: kde-rpo-clean clean-recursive
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

# Not a target:
.C.o:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(COMPILE.C) $(OUTPUT_OPTION) $<

installdirs-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


info-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


install-strip:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 631):
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install


install-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# Implicit/static pattern stem: `'
# File does not exist.
# File has been updated.
# Successfully updated.
# automatic
# @ := install-recursive
# automatic
# % :=
# automatic
# * :=
# automatic
# + :=
# automatic
# | :=
# automatic
# < :=
# automatic
# ^ :=
# automatic
# ? :=
# variable set hash-table stats:
# Load=8/32=25%, Rehash=0, Collisions=3/18=17%
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


ps-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


installcheck-am:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

/home/julius/crystal-0.9.5/config.h.in: /home/julius/crystal-0.9.5/configure.in /home/julius/crystal-0.9.5/aclocal.m4
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 345):
cd $(top_srcdir) && $(AUTOHEADER)
touch $(srcdir)/config.h.in


install-data-am:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

# Not a target:
/home/julius/crystal-0.9.5/admin/libtool.m4.in:
# Implicit rule search has been done.
# Last modified 2005-07-27 21:35:16
# File has been updated.
# Successfully updated.

dist: distdir
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 556):
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)


# Not a target:
.txinfo.info:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(MAKEINFO) $(MAKEINFO_FLAGS) $< -o $@

nmcheck:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

bcheck-am:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 755):
@for i in ; do \
if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
echo "$$i"; \
if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \
rm -f $$i.bchecktest.cc; exit 1; \
fi ; \
echo "" >> $$i.bchecktest.cc.class; \
perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
rm -f a.out; \
fi ; \
done


# Not a target:
Makefile.cvs:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

ps-am:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

mostlyclean-generic:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

uninstall-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


# Not a target:
admin/config.guess:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

dist-all: distdir
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 556):
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)


ctags: CTAGS
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

pdf-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


# Not a target:
.S.s:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(PREPROCESS.S) $< > $@

# Not a target:
.mod:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(COMPILE.mod) -o $@ -e $@ $^

docs-am:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

# Not a target:
.mod.o:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(COMPILE.mod) -o $@ $<

distcleancheck: distclean
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 607):
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2


# Not a target:
.F.f:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(PREPROCESS.F) $(OUTPUT_OPTION) $<

uninstall-am: uninstall-info-am
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

# Not a target:
AUTHORS:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

distuninstallcheck:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 598):
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2


# Not a target:
.S.o:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(COMPILE.S) -o $@ $<

# Not a target:
admin/config.sub:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

check: check-recursive
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

install-exec-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


# Not a target:
admin/ylwrap:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

uninstall-info-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


distclean-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 388):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"


TAGS: tags-recursive config.h.in
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (from `Makefile', line 439):
tags=; \
here=`pwd`; \
if (etags --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
else \
include_option=--include; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique


installdirs: installdirs-recursive
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

all-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 368):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"


# Not a target:
.F:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(LINK.F) $^ $(LOADLIBES) $(LDLIBS) -o $@

distdir: README /home/julius/crystal-0.9.5/Makefile.in /home/julius/crystal-0.9.5/configure AUTHORS INSTALL /home/julius/crystal-0.9.5/Makefile.am acinclude.m4 aclocal.m4 admin/ChangeLog admin/compile admin/config.guess admin/config.sub admin/depcomp admin/install-sh admin/ltmain.sh admin/missing admin/mkinstalldirs admin/ylwrap config.h.in configure configure.in Makefile.cvs admin
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 501):
$(am__remove_distdir)
mkdir $(distdir)
$(mkinstalldirs) $(distdir)/admin
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" \
distdir=../$(distdir)/$$subdir \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)


# Not a target:
admin/compile:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.

CTAGS: ctags-recursive config.h.in
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 465):
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique


uninstall-info-am:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

tags-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 412):
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done


# Not a target:
.f:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(LINK.f) $^ $(LOADLIBES) $(LDLIBS) -o $@

# Not a target:
.f.o:
# Implicit rule search has not been done.
# Modification time never checked.
# File has not been updated.
# commands to execute (built-in):
$(COMPILE.f) $(OUTPUT_OPTION) $<

ps: ps-recursive
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.

install: install-recursive
# Phony target (prerequisite of .PHONY).
# Command-line target.
# Implicit rule search has not been done.
# File does not exist.
# File has been updated.
# Successfully updated.
# variable set hash-table stats:
# Load=0/32=0%, Rehash=0, Collisions=0/9=0%

mostlyclean-recursive:
# Phony target (prerequisite of .PHONY).
# Implicit rule search has not been done.
# File does not exist.
# File has not been updated.
# commands to execute (from `Makefile', line 388):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"


# files hash-table stats:
# Load=179/1024=17%, Rehash=0, Collisions=128/447=29%
# VPATH Search Paths

# No `vpath' search paths.

# General (`VPATH' variable) search path:
# /home/julius/crystal-0.9.5

# Finished Make data base on Tue Nov 22 16:51:14 2005

doch irgentwie is nichts dabei raus gekommen.. oder doch?
kann mir jemand sagen was ich flasch gemacht habe ?

Werbung:
Benutzeravatar
Neverendingo
Newbie
Newbie
Beiträge: 4
Registriert: 24. Dez 2004, 13:24
Wohnort: Dortmund
Kontaktdaten:

Beitrag von Neverendingo » 25. Nov 2005, 11:35

Hallo,

der Prefix sollte nicht "/opt/kde3/bin" sein, sondern "/opt/kde3",
also "./configure --prefix=/opt/kde3".
Alternativ, um sicher zu gehen, kannst du auch
"./configure --prefix=`kde-config --prefix` " eingeben, da wird gleich der richtige Pfad übergeben.
Wichtig dabei ist der richtige Hochstrich, von links oben nach rechts unten.
Grüße,
Ingo

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast