• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst]update auf KDE 4: riesen crash {DANKE!!!}

lilli

Newbie
Hallo,

ich bin ziemlich ratlos und verzweifelt...
Ich habe gestern von KDE3 auf KDE4 geupdaten und bis jetzt vorhin lief alles ohne probleme.
Nachdem er vorhin in standby ging, hab ich nicht wieder "aufwecken" können, also habe ich ihn neugestartet....

Jetzt zeigt er mir den Login-Bildschirm nicht mehr richtig an... (andere Farben und Formen) und schreibt unten in die xconsole:
etc/bluetoth/input.conf und etc/bluetoth/network.conf not found...
dann gebe ich namen und passwort ein.
Jetzt sagt er Fatal ERROR krunner und plasma workspace crashed...
Er fragt ob ich empty oder default panel starten will..
Dann startet er eine default oberfläche und ich komme nicht mehr ins internet (mit knetworkmanger lassen sich keine aktiven verbindungen auswählen) und insgesamt startet alles sehr sehr langsam.

Wie ist das passiert? Habe ich irgendwas kaputt gemacht?
Wie kann ich mein KDE3 oder 4 wieder herstellen? Ich würde auch Gnome nehmen (ich kann leider keine Sessions mehr auswählen, da der Login-Bereich ja so komisch is)..

Dann habe ich noch was ganz dummes gemacht =(((
Ich habe die SuseDVD eingelegt und geschaut ob er das System reparieren kann, dabei hat er mit den Bootloader verändert.. Also ich kann jetzt nicht mehr zwischen Windows und Suse wählen, sondern er zeigt mir nur noch Linux an.. Ich weiß dafür bin ich im falschen Threat aber ich wollte mein volles Problem schildern.

Kann mir irgendwer helfen?
Jetzt kann ich garnichts mehr benutzen weder Linux noch Windows....
 
Ein sauberes KDE4 oder auch KDE3 herzustellen, sollte kein Problem sein... und eigentlich kann man beides auch ohne Probleme parallel verwenden. Welche Repositories nutzt Du? Ich denke, da liegt der Knackpunkt.

Bezüglich der bootloader-Problematik solltest Du eigentlich mit der Forensuche einige Hinweise finden, ansonsten poste das nochmal extra in der entsprechenden Kategorie (edit: ups, hast Du ja schon...).
 
OP
L

lilli

Newbie
Ich komme ja leider nicht mehr ins internet und kann nichts updaten =(
Repos (welche mit KDE zu tun haben):
.../KDE:/43/openSUSE_11.1
../KDE:/KDE3/openSUSE_11.1
 
Ist KDE3 noch bei Dir vorhanden? Schau mal, ob Du das vom login-Bildschirm unter "Sitzungen" auswählen kannst, mit etwas Glück kommst Du dann wenigstens in eine heile und gewohnte Umgebung rein.

Wie lief das upgrade eigentlich ab? Hört sich so an, als hättest Du ziemlich massiv Abhängigkeiten ignorieren lassen...

.../KDE:/43/openSUSE_11.1
../KDE:/KDE3/openSUSE_11.1

Poste mal lieber die komplette Ausgabe von

Code:
zypper lr -u
 
OP
L

lilli

Newbie
ich habe das update wie hier beschrieben gemacht:
http://en.opensuse.org/KDE/Upgrade

allerdings wenn du von abhängikeiten sprichst...ich hab danach noch mit compiz und dem avant window navigator rumgespielt und da wurde ziemlich viel gefragt, vielleicht habe ich da irgendwas falsch installiert...

Code:
#  | Alias                    | Name                     | Aktiviert | Aktualisieren | URI
---+--------------------------+--------------------------+-----------+---------------+------------------------------------------------------------------------------------
1  | 11.1                     | 11.1                      | Ja        | Ja            | http://download.videolan.org/pub/videolan/vlc/SuSE/11.1
2  | 20091014-195428   | 20091014-195428    | Ja        | Ja            | http://download.opensuse.org/repositories/X11%3a/Compiz/openSUSE_11.1/
3  | kde-desktop          | kde-desktop        | Ja        | Ja            | http://download.opensuse.org/repositories/KDE:/43/openSUSE_11.1/
4  | kde3                     | kde3                     | Ja        | Ja            | http://download.opensuse.org/repositories/KDE:/KDE3/openSUSE_11.1/
5  | openSUSE:Factory:Contrib | openSUSE:Factory:Contrib | Ja        | Ja            | http://download.opensuse.org/repositories/openSUSE:/Factory:/Contrib/openSUSE_11.1/
6  | repo                     | NVIDIA Repository        | Ja        | Ja            | http://download.nvidia.com/opensuse/11.1
7  | repo-debug               | openSUSE-11.1-Debug      | Ja        | Ja            | http://download.opensuse.org/debug/distribution/11.1/repo/oss/
8  | repo-non-oss             | openSUSE-11.1-Non-Oss    | Ja        | Ja            | http://download.opensuse.org/distribution/11.1/repo/non-oss/
9  | repo-oss                 | openSUSE-11.1-Oss        | Ja        | Ja            | http://download.opensuse.org/distribution/11.1/repo/oss/
10 | repo-source              | openSUSE-11.1-Source     | Ja        | Ja            | http://download.opensuse.org/source/distribution/11.1/repo/oss/
11 | repo-update              | openSUSE-11.1-Update     | Ja        | Ja            | http://download.opensuse.org/update/11.1/
12 | repo_1                   | VideoLan Repository      | Ja        | Ja            | http://download.videolan.org/pub/videolan/vlc/SuSE/11.1/
13 | repo_2                   | Packman Repository       | Ja        | Ja            | http://ftp.skynet.be/pub/packman/suse/11.1/

leider sieht der login-bildschirm sehr merkwürdig aus (ich versuche es mal zu beschreiben) und ich kann nichts auswählen..
der hintergrund ich gelblich-ocker, der login bereich ein grauer kasten:
welcome at linux-kiwv
login:

unten erscheint eine konsole:
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option ir sysctl net.netfilter.nf_contrack_acct=1 to enable it.
Parsing /etc/blutooth.audio.conf failed: No such file or directory
failed to find Bluethooth netlink family
Parsing /etc/bluethooth/input.conf failed:No such file or directory
Parsing /etc/bluethooth/network.conf failed:No such file or directory

Kann ich noch irgendwas retten?
 
ich hab danach noch mit compiz und dem avant window navigator rumgespielt und da wurde ziemlich viel gefragt, vielleicht habe ich da irgendwas falsch installiert...

Hm, es ist schwierig, etwas zu reparieren, wenn derlei nicht mehr nachvollzogen werden kann. Meine Hoffnung ist ja, dass Du noch irgendwie in Dein KDE3 hinein kommst, um von dort aus die Probleme zu fixen, eine Internetverbindung wäre ja schonmal sehr hilfreich. Etwas Geduld ist vielleicht nicht schlecht.

Poste doch mal bitte die Ausgabe von:

Code:
cat /etc/sysconfig/displaymanager

sowie

Code:
rpm -qa --last | tail -n 50

Bin mir noch nicht sicher, ob wir auf die schnelle was hinwurschteln können, aber erstmal schauen.
 

Jägerschlürfer

Moderator
Teammitglied
ich denke da wird kdm4 nicht mit installiert worden sein. Daher auch die "komische" Anmeldemaske. Oder es ist einfach nur ein falscher Wert als displaymanager gesetzt. dazu poste mal die Ausgabe wie von gropiuskalle gefordert.

was meinst du mit
lilli schrieb:
ich hab danach noch mit compiz und dem avant window navigator rumgespielt und da wurde ziemlich viel gefragt, vielleicht habe ich da irgendwas falsch installiert...
meinst du damit, dass du jede Menge Konflikte hattest?
 
OP
L

lilli

Newbie
Jägerschlürfer schrieb:
ich denke da wird kdm4 nicht mit installiert worden sein. Daher auch die "komische" Anmeldemaske. Oder es ist einfach nur ein falscher Wert als displaymanager gesetzt. dazu poste mal die Ausgabe wie von gropiuskalle gefordert.

was meinst du mit
lilli schrieb:
ich hab danach noch mit compiz und dem avant window navigator rumgespielt und da wurde ziemlich viel gefragt, vielleicht habe ich da irgendwas falsch installiert...
meinst du damit, dass du jede Menge Konflikte hattest?

genau. Ich kenne mich darin leider noch nicht so gut aus. Yast fragt immer was er machen sollte z.b. Auswahlmöglichkeiten: nicht installieren, downgrade, andere Versionen installieren.

Meine Ausgaben:

Code:
cat /etc/sysconfig/displaymanager

## Path:	Desktop/Display manager
## Description:	settings to generate a proper displaymanager config
## Type:	string(kdm,kdm3,kdm4,xdm,gdm,wdm,console)
## Default:	""
#
# Here you can set the default Display manager (kdm/xdm/gdm/wdm/console).
# all changes in this file require a restart of the displaymanager
#
DISPLAYMANAGER="kdm4"

## Type:	yesno
## Default:	no
#
# Allow remote access (XDMCP) to your display manager (xdm/kdm/gdm). Please note
# that a modified kdm or xdm configuration, e.g. by KDE control center
# will not be changed. For gdm, values will be updated after change.
# XDMCP service should run only on trusted networks and you have to disable
# firewall for interfaces, where you want to provide this service.
#
DISPLAYMANAGER_REMOTE_ACCESS="no"

## Type:	yesno
## Default:	no
#
# Allow remote access of the user root to your display manager. Note
# that root can never login if DISPLAYMANAGER_SHUTDOWN is "auto" and
# System/Security/Permissions/PERMISSION_SECURITY is "paranoid"
#
DISPLAYMANAGER_ROOT_LOGIN_REMOTE="no"

## Type:	yesno
## Default:	yes
#
# Let the displaymanager start a local Xserver.
# Set to "no" for remote-access only.
# Set to "no" on architectures without any Xserver (e.g. s390/s390x).
#
DISPLAYMANAGER_STARTS_XSERVER="yes"

## Type:        yesno
## Default:     no
#
# TCP port 6000 of Xserver. When set to "no" (default) Xserver is
# started with "-nolisten tcp". Only set this to "yes" if you really
# need to. Remote X service should run only on trusted networks and
# you have to disable firewall for interfaces, where you want to
# provide this service. Use ssh X11 port forwarding whenever possible.
#
DISPLAYMANAGER_XSERVER_TCP_PORT_6000_OPEN="no"

## Type:    string
## Default:
#
# Define the user whom should get logged in without request. If string
# is empty, display standard login dialog.
#
DISPLAYMANAGER_AUTOLOGIN=""

## Type:        yesno
## Default:     no
#
# Allow all users to login without password, but ask for the user, if
# DISPLAYMANAGER_AUTOLOGIN is empty.
#
DISPLAYMANAGER_PASSWORD_LESS_LOGIN="no"

## Type:        yesno
## Default:     no
#
# Display a combobox for Active Directory domains.
#
DISPLAYMANAGER_AD_INTEGRATION="no"

## Type:    list(root,all,none,auto)
## Default: auto
#
# Determine who will be able to shutdown or reboot the system in kdm
# and gdm. Valid values are: "root" (only root can shutdown), "all"
# (everybody can shutdown), "none" (nobody can shutdown from
# displaymanager), "auto" (follow
# System/Security/Permissions/PERMISSION_SECURITY to decide: "easy
# local" is equal to "all", everything else is equal to "root"). Note
# that remote user can never shutdown in GDM.
#
DISPLAYMANAGER_SHUTDOWN="auto"

## Type:        string
## Default:     ""
#
# Mode to configure on output devices by default
# (RANDR 1.2 compatible drivers only).
#
# If set to "auto", DISPLAYMANAGER_RANDR_MODE_auto is used on laptops, and
# the empty string on workstations.
#
# The output is not explicitly enabled (read: disabled) if set to an empty
# string.
# If the variable contains a fully configured modeline (see default of
# DISPLAYMANAGER_RANDR_MODE_auto), the mode is defined and set.
# If the variable contains a mode name only, the mode has to be defined
# already.
#
# If a monitor is attached during Xstartup, or when invoking "xrandr --auto"
# during runtime, the output is correctly configured and a mode is
# automatically selected if none has been used so far.
#
# Variables are checked according to their extension for
#    VGA DVI_I DVI_D DVI_A Composite S_Video Component LFP Proprietary
#
DISPLAYMANAGER_RANDR_MODE_VGA=""

## Type:        string
## Default:     "1024x768_60 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync"
#
# Mode to use for laptops for DISPLAYMANAGER_RANDR_MODE_* on laptops only,
# when the according variable is set to "auto".
# (RANDR 1.2 compatible drivers only).
#
DISPLAYMANAGER_RANDR_MODE_auto="1024x768_60 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync"
## Path:	Desktop/Display manager
## Description: settings to generate a proper displaymanager config
## Config:      kdm3
## Type:    string
## Default: 
#
# space separated list of users for which icons should be shown in KDM
# if empty, then take system defaults
#
KDM_USERS=""

## Type:    string
## Default: 
#
# Special greeting words in kdm
#
KDM_GREETSTRING=""

## Type:        string
## Default: 
#
# Defines extra Server Arguments given to the kdm display manager when
# starting a local display. Useful to override e.g. the -dpi setting.
# 
DISPLAYMANAGER_KDM_LOCALARGS=""

## Type:        string
## Default:     SUSE
#
# Define the theme to be used by kdm. If empty, the traditional login
# window is used (which lacks some features)
# 
DISPLAYMANAGER_KDM_THEME="SUSE"
## Path:        Desktop/Display manager
## Type:        string(Xorg)
## Default:     "Xorg"
#
DISPLAYMANAGER_XSERVER=Xorg
#DISPLAYMANAGER_RANDR_MODE_DVI_I=""
#DISPLAYMANAGER_RANDR_MODE_DVI_D=""
#DISPLAYMANAGER_RANDR_MODE_DVI_A=""
#DISPLAYMANAGER_RANDR_MODE_Compsite=""
#DISPLAYMANAGER_RANDR_MODE_S_Video=""
#DISPLAYMANAGER_RANDR_MODE_Component=""
#DISPLAYMANAGER_RANDR_MODE_LFP=""
#DISPLAYMANAGER_RANDR_MODE_Proprietary=""

für das zweite
Code:
info-4.12-1.85                                Mi 10 Dez 2008 08:00:07 CET
libzio-0.9-4.19                               Mi 10 Dez 2008 08:00:06 CET
libuuid1-1.41.1-11.9                          Mi 10 Dez 2008 08:00:06 CET
libgpg-error0-1.6-6.10                        Mi 10 Dez 2008 08:00:06 CET
libgcc43-4.3.3_20081022-9.5                   Mi 10 Dez 2008 08:00:06 CET
libexpat1-2.0.1-88.10                         Mi 10 Dez 2008 08:00:06 CET
libcom_err2-1.41.1-11.9                       Mi 10 Dez 2008 08:00:06 CET
insserv-1.12.0-22.15                          Mi 10 Dez 2008 08:00:06 CET
pth-2.0.7-102.29                              Mi 10 Dez 2008 08:00:05 CET
cracklib-2.8.12-55.1                          Mi 10 Dez 2008 08:00:05 CET
bzip2-1.0.5-34.5                              Mi 10 Dez 2008 08:00:05 CET
pm-utils-0.99.4.20071229-10.3                 Mi 10 Dez 2008 08:00:04 CET
elfutils-0.137-3.11                           Mi 10 Dez 2008 08:00:04 CET
dhcpcd-3.2.3-44.1                             Mi 10 Dez 2008 08:00:04 CET
bash-3.2-141.10                               Mi 10 Dez 2008 08:00:04 CET
libreadline5-5.2-141.10                       Mi 10 Dez 2008 08:00:03 CET
libdw1-0.137-3.11                             Mi 10 Dez 2008 08:00:03 CET
libasm1-0.137-3.11                            Mi 10 Dez 2008 08:00:03 CET
libacl-2.2.47-27.5                            Mi 10 Dez 2008 08:00:03 CET
file-4.24-43.1                                Mi 10 Dez 2008 08:00:03 CET
ncurses-utils-5.6-89.10                       Mi 10 Dez 2008 08:00:02 CET
fillup-1.42-242.8                             Mi 10 Dez 2008 08:00:02 CET
audit-libs-1.7.7-5.1                          Mi 10 Dez 2008 08:00:02 CET
libdb-4_5-4.5.20-94.17                        Mi 10 Dez 2008 07:59:56 CET
libbz2-1-1.0.5-34.5                           Mi 10 Dez 2008 07:59:56 CET
keyutils-libs-1.2-107.4                       Mi 10 Dez 2008 07:59:56 CET
libxcrypt-3.0.1-25.20                         Mi 10 Dez 2008 07:59:55 CET
libsepol1-2.0.32-5.38                         Mi 10 Dez 2008 07:59:55 CET
libselinux1-2.0.71-3.38                       Mi 10 Dez 2008 07:59:55 CET
libnscd-2.0.2-72.47                           Mi 10 Dez 2008 07:59:55 CET
libelf1-0.137-3.11                            Mi 10 Dez 2008 07:59:55 CET
pmtools-20071116-44.3                         Mi 10 Dez 2008 07:59:54 CET
net-tools-1.60-725.5                          Mi 10 Dez 2008 07:59:54 CET
mingetty-1.0.7s-70.41                         Mi 10 Dez 2008 07:59:54 CET
zlib-1.2.3-104.137                            Mi 10 Dez 2008 07:59:53 CET
popt-1.7-20.1                                 Mi 10 Dez 2008 07:59:53 CET
libncurses5-5.6-89.10                         Mi 10 Dez 2008 07:59:53 CET
boost-license-1.36.0-9.5                      Mi 10 Dez 2008 07:59:53 CET
cracklib-dict-full-2.8.12-43.23               Mi 10 Dez 2008 07:59:52 CET
terminfo-base-5.6-89.10                       Mi 10 Dez 2008 07:59:51 CET
openSUSE-release-livecd-kde-11.1-2.2          Mi 10 Dez 2008 07:59:51 CET
filesystem-11.1-2.3                           Mi 10 Dez 2008 07:59:51 CET
gpg-pubkey-a1912208-446a0899                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-9c800aca-481f343a                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-7e2e3b05-4816488f                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-56b4177a-47965b33                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-3dbdc284-49144c3f                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-3d25d3d9-36e12d04                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-307e3d54-481f30aa                  Mi 10 Dez 2008 07:59:48 CET
gpg-pubkey-0dfb3188-41ed929b                  Mi 10 Dez 2008 07:59:48 CET

Vielen Dank für eure Mühe und Hilfe!! Ich hoffe ich verstehe davon bald mehr!
 

lOtz1009

Moderator
Teammitglied
Zu den Repos: du hast zwei Mal den vlc drin. Deaktivier die beiden Repos mal komplett. Dann zeig doch mal die Prioritäten der Repos
Code:
zypper lr -p
Das Factory-Repo ebenfalls deaktivieren. Dann, wenn die Prios stimmen mal mit
Code:
zypper -v up
oder
Code:
zypper -v dup
schauen, was an Updates kommen soll.
 
OP
L

lilli

Newbie
Code:
#  | Alias                    | Name                     | Aktiviert | Aktualisieren | Priorität
---+--------------------------+--------------------------+-----------+---------------+----------
1  | 11.1                     | 11.1                     | Nein      | Ja            |   99     
2  | 20091014-195428          | 20091014-195428          | Ja        | Ja            |   99     
3  | kde-desktop              | kde-desktop              | Ja        | Ja            |   10     
4  | kde3                     | kde3                     | Ja        | Ja            |   10     
5  | openSUSE:Factory:Contrib | openSUSE:Factory:Contrib | Nein        | Ja            |   99     
6  | repo                     | NVIDIA Repository        | Ja        | Ja            |   99     
7  | repo-debug               | openSUSE-11.1-Debug      | Ja        | Ja            |  100     
8  | repo-non-oss             | openSUSE-11.1-Non-Oss    | Ja        | Ja            |   99     
9  | repo-oss                 | openSUSE-11.1-Oss        | Ja        | Ja            |   99     
10 | repo-source              | openSUSE-11.1-Source     | Ja        | Ja            |  100     
11 | repo-update              | openSUSE-11.1-Update     | Ja        | Ja            |   99     
12 | repo_1                   | VideoLan Repository      | Nein      | Ja            |   99     
13 | repo_2                   | Packman Repository       | Ja        | Ja            |   99

kann ich updaten auch wenn ich nicht ins internet komme?
Oder von der SuseDVD?
 
OP
L

lilli

Newbie
was könnte denn passiert sein, dass ich nicht mehr ins internet komme?
Er sagt ja am anfang auch in der xconsole:
Code:
failed to find Bluethooth netlink family
Parsing /etc/bluethooth/input.conf failed:No such file or directory
Parsing /etc/bluethooth/network.conf failed:No such file or directory

hab ich da irgendwas verstellt? Wieso werden diese Dateien nicht mehr gefunden?
Vorher hat alles problemlos funktioniert.
 
OP
L

lilli

Newbie
lOtz schrieb:
Gehst du per Bluetooth ins Netz?
neee mit wlan :D
also ich benutze den knetworkmanger. Er hat auch noch alle meine gespeichterten Netzwerke. Allerding listet er weder wlan oder lan als verbindungsmöglichkeit auf...

was könnte ich denn noch probieren?
 
OP
L

lilli

Newbie
gropiuskalle schrieb:
Setze mal als root

Code:
smpppd

ab.
entschuldige wenn ich nochmal nachfrage, aber was genau soll ich eingeben? also wie setze ich smpppd ab?
ich habe jetzt nur smpppd als root eingegeben. Was sollte sich tun?
 
OP
L

lilli

Newbie
Ich habe wegen der internet-problematik jetzt nochmal ins die rubrik Wlan geschrieben, weil jemand dort ein ähnliches Problem hatte.
Ich poste dort jetzt noch meine Ausgabe vom collectNWData.sh script.
 
man smpppd schrieb:
DESCRIPTION
smpppd is a daemon that controls several internet connections.

Damit wirft man den für die Internetverbindung notwendigen daemon / Dienst an. Deine Fehlerbeschreibung (mit den nicht auswählbaren Verbindungen) erinnerte mich an ein ähnliches Problem, was ich mal hatte und das ich so lösen konnte. Hat sich denn nichts geändert?
 
OP
L

lilli

Newbie
wenn ich das internet wieder hinbekomme, wie stehen denn dann die chancen ungefähr, das KDE wieder richtig läuft?
bzw was kann ich machen, wenn es nicht mehr klappt... kann ich sozusagen nochmal neu installieren?
 
Oben