• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst]KDE 4.2 friert ein, wenn USB Drucker druckt

C

colnago

Newbie
Hallo,

habe folgendes Problem:

Ich habe opensuse 11.1 und KDE 4.2 installiert und bislang läuft so gut wie alles ziemlich sauber- bis auf folgendes Problem. Sobald ich meinen USB Drucker anschalte (Epson CX3200...ja ich weiß, der ist etwas älter) friert mir meine Maus (Funk, Labtec) ein. Mit der Tastatur kann ich alles weiter bedienen und die Programme schließen. Sogar das Auswählen auf Neustart funktioniert, wobei sich ein Neustart ohne (Reboot-Taste) nicht realisieren lässt.

Ist ein solches problem bekannt????

Danke für Eure Hilfe!

Gruß colnago

Asus K10N78-1394
AMD X3
4 GB RAM
Opensuse 11.1
KDE 4.2
 
gropiuskalle

gropiuskalle

Guru
Beobachte doch mal während eines Druckvorgangs die Ausgaben von

Code: 
top

in der Konsole. Ist da ein Prozess besonders ressourcenhungrig?
 
OP
C

colnago

Newbie
Bei Eingabe von hwinfo --usb erscheint folgendes:

Code: 
Passwort: 
linux-9ita:~ # hwinfo --usb
05: SCSI 800.0: 10600 Disk                                      
  [Created at block.254]                                        
  UDI: /org/freedesktop/Hal/devices/storage_serial_Myson_CS8819A2_113_0_100_0_0
  Unique ID: 4zpN.QzCDLw1PW_5                                                  
  SysFS ID: /class/block/sdc                                                   
  SysFS BusID: 8:0:0:0                                                         
  SysFS Device Link: /devices/pci0000:00/0000:00:02.1/usb3/3-5/3-5:1.0/host8/target8:0:0/8:0:0:0
  Hardware Class: disk                                                                          
  Model: "Myson CS8819A2-113  0"                                                                
  Vendor: usb 0x04cf "Myson"                                                                    
  Device: usb 0x8819 "CS8819A2-113  0"                                                          
  Revision: "1.01"                                                                              
  Serial ID: "100"                                                                              
  Driver: "usb-storage", "sd"                                                                   
  Driver Modules: "usb_storage"                                                                 
  Device File: /dev/sdc (/dev/sg4)                                                              
  Device Files: /dev/sdc, /dev/disk/by-id/usb-Myson_CS8819A2-113_0_100-0:0, /dev/disk/by-path/pci-0000:00:02.1-usb-0:5:1.0-scsi-0:0:0:0
  Device Number: block 8:32-8:47 (char 21:4)                                                                                           
  Features: Hotpluggable                                                                                                               
  Geometry (Logical): CHS 1024/0/62                                                                                                    
  Speed: 480 Mbps                                                                                                                      
  Module Alias: "usb:v04CFp8819dA213dc00dsc00dp00ic08isc06ip50"                                                                        
  Driver Info #0:                                                                                                                      
    Driver Status: usb_storage is active                                                                                               
    Driver Activation Cmd: "modprobe usb_storage"                                                                                      
  Drive status: no medium                                                                                                              
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                            

06: SCSI 800.1: 10600 Disk
  [Created at block.254]  
  UDI: /org/freedesktop/Hal/devices/storage_serial_Myson_CS8819A2_113_1_100_0_1
  Unique ID: ofUZ.9orUzNxCVT9                                                  
  SysFS ID: /class/block/sdd                                                   
  SysFS BusID: 8:0:0:1                                                         
  SysFS Device Link: /devices/pci0000:00/0000:00:02.1/usb3/3-5/3-5:1.0/host8/target8:0:0/8:0:0:1
  Hardware Class: disk                                                                          
  Model: "Myson CS8819A2-113  1"                                                                
  Vendor: usb 0x04cf "Myson"                                                                    
  Device: usb 0x8819 "CS8819A2-113  1"                                                                                                                                              
  Revision: "1.01"                                                                                                                                                                  
  Driver: "usb-storage", "sd"                                                                                                                                                       
  Driver Modules: "usb_storage"                                                                                                                                                     
  Device File: /dev/sdd (/dev/sg5)                                                                                                                                                  
  Device Files: /dev/sdd, /dev/disk/by-id/usb-Myson_CS8819A2-113_1_100-0:1, /dev/disk/by-path/pci-0000:00:02.1-usb-0:5:1.0-scsi-0:0:0:1                                             
  Device Number: block 8:48-8:63 (char 21:5)                                                                                                                                        
  Features: Hotpluggable                                                                                                                                                            
  Geometry (Logical): CHS 1024/0/62                                                                                                                                                 
  Drive status: no medium                                                                                                                                                           
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                                                                         
                                                                                                                                                                                    
07: SCSI 800.2: 10600 Disk                                                                                                                                                          
  [Created at block.254]                                                                                                                                                            
  UDI: /org/freedesktop/Hal/devices/storage_serial_Myson_CS8819A2_113_2_100_0_2                                                                                                     
  Unique ID: Frkd.9orUzNxCVT9                                                                                                                                                       
  SysFS ID: /class/block/sde                                                                                                                                                        
  SysFS BusID: 8:0:0:2                                                                                                                                                              
  SysFS Device Link: /devices/pci0000:00/0000:00:02.1/usb3/3-5/3-5:1.0/host8/target8:0:0/8:0:0:2                                                                                    
  Hardware Class: disk                                                                                                                                                              
  Model: "Myson CS8819A2-113  2"                                                                                                                                                    
  Vendor: usb 0x04cf "Myson"                                                                                                                                                        
  Device: usb 0x8819 "CS8819A2-113  2"                                                                                                                                              
  Revision: "1.01"                                                                                                                                                                  
  Driver: "usb-storage", "sd"                                                                                                                                                       
  Driver Modules: "usb_storage"                                                                                                                                                     
  Device File: /dev/sde (/dev/sg6)                                                                                                                                                  
  Device Files: /dev/sde, /dev/disk/by-id/usb-Myson_CS8819A2-113_2_100-0:2, /dev/disk/by-path/pci-0000:00:02.1-usb-0:5:1.0-scsi-0:0:0:2                                             
  Device Number: block 8:64-8:79 (char 21:6)                                                                                                                                        
  Features: Hotpluggable                                                                                                                                                            
  Geometry (Logical): CHS 1024/0/62                                                                                                                                                 
  Drive status: no medium                                                                                                                                                           
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                                                                         

08: SCSI 800.3: 10600 Disk
  [Created at block.254]  
  UDI: /org/freedesktop/Hal/devices/storage_serial_Myson_CS8819A2_113_3_100_0_3
  Unique ID: i0+h.9orUzNxCVT9                                                  
  SysFS ID: /class/block/sdf                                                   
  SysFS BusID: 8:0:0:3                                                         
  SysFS Device Link: /devices/pci0000:00/0000:00:02.1/usb3/3-5/3-5:1.0/host8/target8:0:0/8:0:0:3
  Hardware Class: disk                                                                          
  Model: "Myson CS8819A2-113  3"                                                                
  Vendor: usb 0x04cf "Myson"                                                                    
  Device: usb 0x8819 "CS8819A2-113  3"                                                          
  Revision: "1.01"                                                                              
  Driver: "usb-storage", "sd"                                                                   
  Driver Modules: "usb_storage"                                                                 
  Device File: /dev/sdf (/dev/sg7)                                                              
  Device Files: /dev/sdf, /dev/disk/by-id/usb-Myson_CS8819A2-113_3_100-0:3, /dev/disk/by-path/pci-0000:00:02.1-usb-0:5:1.0-scsi-0:0:0:3
  Device Number: block 8:80-8:95 (char 21:7)                                                                                           
  Features: Hotpluggable                                                                                                               
  Geometry (Logical): CHS 1024/0/62                                                                                                    
  Drive status: no medium                                                                                                              
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                            

09: USB 00.0: 10a00 Hub
  [Created at usb.122] 
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0
  Unique ID: k4bc.kllrQr_lFX9                                         
  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0             
  SysFS BusID: 1-0:1.0                                                
  Hardware Class: hub                                                 
  Model: "Linux 2.6.27.7-9-pae ohci_hcd OHCI Host Controller"         
  Hotplug: USB                                                        
  Vendor: usb 0x1d6b "Linux 2.6.27.7-9-pae ohci_hcd"                  
  Device: usb 0x0001 "OHCI Host Controller"                           
  Revision: "2.06"                                                    
  Serial ID: "0000:00:02.0"                                           
  Driver: "hub"                                                       
  Driver Modules: "usbcore"                                           
  Speed: 12 Mbps                                                      
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"       
  Driver Info #0:                                                     
    Driver Status: usbcore is active                                  
    Driver Activation Cmd: "modprobe usbcore"                         
  Config Status: cfg=no, avail=yes, need=no, active=unknown           

10: USB 00.0: 10a00 Hub
  [Created at usb.122] 
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_04_0_if0
  Unique ID: pBe4.moLwSePIflE                                         
  SysFS ID: /devices/pci0000:00/0000:00:04.0/usb2/2-0:1.0             
  SysFS BusID: 2-0:1.0                                                
  Hardware Class: hub                                                 
  Model: "Linux 2.6.27.7-9-pae ohci_hcd OHCI Host Controller"         
  Hotplug: USB                                                        
  Vendor: usb 0x1d6b "Linux 2.6.27.7-9-pae ohci_hcd"                  
  Device: usb 0x0001 "OHCI Host Controller"                           
  Revision: "2.06"                                                    
  Serial ID: "0000:00:04.0"                                           
  Driver: "hub"                                                       
  Driver Modules: "usbcore"                                           
  Speed: 12 Mbps                                                      
  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"       
  Driver Info #0:                                                     
    Driver Status: usbcore is active                                  
    Driver Activation Cmd: "modprobe usbcore"                         
  Config Status: cfg=no, avail=yes, need=no, active=unknown           

11: USB 00.0: 10a00 Hub
  [Created at usb.122] 
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0
  Unique ID: uIhY.OqydEZZ981A                                         
  SysFS ID: /devices/pci0000:00/0000:00:02.1/usb3/3-0:1.0             
  SysFS BusID: 3-0:1.0                                                
  Hardware Class: hub                                                 
  Model: "Linux 2.6.27.7-9-pae ehci_hcd EHCI Host Controller"         
  Hotplug: USB                                                        
  Vendor: usb 0x1d6b "Linux 2.6.27.7-9-pae ehci_hcd"                  
  Device: usb 0x0002 "EHCI Host Controller"                           
  Revision: "2.06"                                                    
  Serial ID: "0000:00:02.1"                                           
  Driver: "hub"                                                       
  Driver Modules: "usbcore"                                           
  Speed: 480 Mbps                                                     
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"       
  Driver Info #0:                                                     
    Driver Status: usbcore is active                                  
    Driver Activation Cmd: "modprobe usbcore"                         
  Config Status: cfg=no, avail=yes, need=no, active=unknown           

12: USB 00.0: 10a00 Hub
  [Created at usb.122] 
  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_04_1_if0
  Unique ID: zPk0.QtYiGM_hXFF                                         
  SysFS ID: /devices/pci0000:00/0000:00:04.1/usb4/4-0:1.0             
  SysFS BusID: 4-0:1.0                                                
  Hardware Class: hub                                                 
  Model: "Linux 2.6.27.7-9-pae ehci_hcd EHCI Host Controller"         
  Hotplug: USB                                                        
  Vendor: usb 0x1d6b "Linux 2.6.27.7-9-pae ehci_hcd"                  
  Device: usb 0x0002 "EHCI Host Controller"                           
  Revision: "2.06"                                                    
  Serial ID: "0000:00:04.1"                                           
  Driver: "hub"                                                       
  Driver Modules: "usbcore"                                           
  Speed: 480 Mbps                                                     
  Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"       
  Driver Info #0:                                                     
    Driver Status: usbcore is active                                  
    Driver Activation Cmd: "modprobe usbcore"                         
  Config Status: cfg=no, avail=yes, need=no, active=unknown           

14: USB 00.0: 10800 Keyboard
  [Created at usb.122]      
  UDI: /org/freedesktop/Hal/devices/usb_device_1020_106_noserial_if0
  Unique ID: cLrx.s5sC4YOSxe0                                       
  Parent ID: k4bc.kllrQr_lFX9                                       
  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0       
  SysFS BusID: 1-2:1.0                                              
  Hardware Class: keyboard                                          
  Model: "Labtec USB HID Device"                                    
  Hotplug: USB                                                      
  Vendor: usb 0x1020 "Labtec"                                       
  Device: usb 0x0106 "USB HID Device"                               
  Revision: "1.04"                                                  
  Driver: "usbhid"                                                  
  Driver Modules: "usbhid"                                          
  Device File: /dev/input/input0                                    
  Speed: 1.5 Mbps                                                   
  Module Alias: "usb:v1020p0106d0104dc00dsc00dp00ic03isc01ip01"     
  Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #9 (Hub)

15: USB 00.1: 0000 Unclassified device-------------------------------->Funktastatur 
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1020_106_noserial_if1
  Unique ID: 3X50.bCxMR4C2shA
  Parent ID: k4bc.kllrQr_lFX9
  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.1
  SysFS BusID: 1-2:1.1
  Hardware Class: unknown
  Model: "Labtec USB HID Device"
  Hotplug: USB
  Vendor: usb 0x1020 "Labtec"
  Device: usb 0x0106 "USB HID Device"
  Revision: "1.04"
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/input1
  Speed: 1.5 Mbps
  Module Alias: "usb:v1020p0106d0104dc00dsc00dp00ic03isc00ip00"
  Driver Info #0:
    Driver Status: usbhid is active
    Driver Activation Cmd: "modprobe usbhid"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #9 (Hub)

16: USB 00.2: 10503 USB Mouse
  [Created at usb.122]
  UDI: /org/freedesktop/Hal/devices/usb_device_1020_106_noserial_if2
  Unique ID: WiL4.L4HS6wyFDME
  Parent ID: k4bc.kllrQr_lFX9
  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.2
  SysFS BusID: 1-2:1.2
  Hardware Class: mouse
  Model: "Labtec USB HID Device"
  Hotplug: USB
  Vendor: usb 0x1020 "Labtec"
  Device: usb 0x0106 "USB HID Device"
  Revision: "1.04"
  Compatible to: int 0x0210 0x0015
  Driver: "usbhid"
  Driver Modules: "usbhid"
  Device File: /dev/input/mice (/dev/input/mouse0)
  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-id/usb-PATEN_USB_HID_Device-event-mouse, /dev/input/by-path/pci-0000:00:02.0-usb-0:2:1.2-event-mouse, /dev/input/by-id/usb-PATEN_USB_HID_Device-mouse, /dev/input/by-path/pci-0000:00:02.0-usb-0:2:1.2-mouse
  Device Number: char 13:63 (char 13:32)
  Speed: 1.5 Mbps
  Module Alias: "usb:v1020p0106d0104dc00dsc00dp00ic03isc01ip02"
  Driver Info #0:
    Buttons: 5
    Wheels: 1
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #9 (Hub)

Der Drucker hängt an keinem USB Hub...sondern ist normal auf USB-Anschluss am Mainboard (Standart)

Gruß colnago
 
OP
C

colnago

Newbie
Das Problem ist wohl Folgendes:

Ich habe auf dem Desktop Plasmmoids Weather & RSS Feed. Nachdem ich diese von der Arbeitsfläche gekickt habe, läuft mein USB Drucker stabli und der KDE 4.2 Desktop friert nicht mehr ein!

Ist ein Bug bei den Plasmoids bekannt???

Gruß
colnago
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben