Moin Alle,
habe hier ein Thinkpad T43 mit openSUSE 11.0 und KDE 4.1.
Ich wollte gerne über die GUI von Sax die diversen Mäuse (Touchpad, Trackpoint, USB-Maus) konfigurieren.
Wenn ich den Dialog schließe und speichern möchte bekomme ich folgende Fehlermeldung:
Mal abgesehen davon, dass diese Fehlermeldung echt mal #@'+~ ist, habe ich natürlich versucht den Identifier hinzuzufügen: Identifier "Mouse[2]". Dieser Eintrag ist allerdings nicht persistent und geht immer wieder verloren.
Und so sehen die entsprechenden Teile in der Datei /var/lib/sax/xorg.conf aus:
Leider weiß ich gar nicht wofür diese Datei überhaupt benötigt wird, da ich natürlich auch eine /etc/X11/xorg.conf habe:
Und hier ja nunmal alles ganz vernünftig aussieht.
Für ein bißchen Erklärung und evtl. Lösungsvorschläge bin ich sehr dankbar.
greetz, kai
habe hier ein Thinkpad T43 mit openSUSE 11.0 und KDE 4.1.
Ich wollte gerne über die GUI von Sax die diversen Mäuse (Touchpad, Trackpoint, USB-Maus) konfigurieren.
Wenn ich den Dialog schließe und speichern möchte bekomme ich folgende Fehlermeldung:
Code:
SaX library: Erfolg
X configuration: Parse error on line 92 of section InputDevice in file /var/lib/sax/xorg.confParse error on line 92 of section InputDevice in file /var/lib/sax/xorg.confParse error on line 92 of section InputDevice in file /var/lib/sax/xorg.conf This section must have an Identifier line. This section must have an Identifier line. This section must have an Identifier line.
Und so sehen die entsprechenden Teile in der Datei /var/lib/sax/xorg.conf aus:
Code:
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[1]"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "Name" "Touchpad"
Option "SHMConfig" "on"
Option "Vendor" "Synaptics"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
Option "Name" "TPPS/2 TrackPoint"
Option "Vendor" "IBM"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Mouse[3]"
EndSection
Leider weiß ich gar nicht wofür diese Datei überhaupt benötigt wird, da ich natürlich auch eine /etc/X11/xorg.conf habe:
Code:
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "HorizScrollDelta" "0"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "EmulateWheel" "on"
Option "EmulateWheelButton" "2"
Option "InputFashion" "Mouse"
Option "Name" "IBM;TPPS/2 TrackPoint"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Und hier ja nunmal alles ganz vernünftig aussieht.
Für ein bißchen Erklärung und evtl. Lösungsvorschläge bin ich sehr dankbar.
greetz, kai