• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Cd Verzeichnis unter openSUSE

Hallo Zusammen,
zuerst einmal, mein Problem ist irgendwie Themenübergreifend, also bitte nicht böse sein, wenn ich es falsch eingeordnet haben sollte.
Ausgangssituation: Call of Duty 4 über Wine installieren
Problem: Ich finde das Verzeichnis für die DVD nicht, normalerweise sollte sie ja auch auf dem Desktop oder unter /media sein, oder?
Des weiteren kann mein Nautilus komischerweise keine Network und Computerorte anzeigen(Nautilus kann nicht mit NW/CO umgehen).
Habe das auch schon in einigen Ubuntu-Foren gelesen, kann mir aber eigentlich gar nicht vorstellen, das das ein Fehler von Nautilus ist, bitte korrigiert mich, wenn ich falsch liege.
opensuse 11.0, 32 bit, gnome

Danke für eure Hilfe, Bananajoe77
 

noctua

Member
Hallo,

zu deinem DVD-Problem: gib mal im Terminal
Code:
df
ein; damit wird dir angezeigt, was im Moment alles gemountet ist. Da sollte das DVD-Laufwerk dabei stehen mit dem Mount-Point.
Ansonsten kannst du ja einfach versuchen, es manuell mounten.

Hilft das weiter?

Gruß,
noctua
 
OP
B

Bananajoe77

Newbie
Hallo noctua , danke schonmal für deine Antwort. Leider schaffe ich es erst am Sonntag an den Pc, dann poste ich mal, ob es was gebracht hat. Danke ,
Bananajoe77
 
OP
B

Bananajoe77

Newbie
ok, ich habe gerade "df" eingegeben, da sehe ich aber nicht mein Laufwerk.
Wie kann ich das denn manuell mounten? Bananajoe77
 
OP
B

Bananajoe77

Newbie
Sry für Dreifachpost, aber das hier muss ich noch hinzufügen:
Mein SUSE erkennt anscheinend auch nicht mehr meinen USB-Stick!
Hoffe auf baldige Hilfe, danke Bananajoe77
 
OP
B

Bananajoe77

Newbie
Also, der Befehl lsusb zeigt folgendes an:
Code:
Bus 002 Device 005: ID 090c:1000 Feiya Technology Corp. Memory Bar
Bus 002 Device 002: ID 057c:5601 AVM GmbH AVM FRITZ!WLAN Stick
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046d:c51a Logitech, Inc. MX Revolution/G7 Cordless Mouse
Bus 001 Device 002: ID 0a81:0101 Chesen Electronics Corp. Keyboard
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Der Memory Bar von Feiya ist des Usb-Stick.
Der Befehl dmesg liefert diese vielen Zeilen:
Code:
ACPI: RTC can wake from S4
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:01: iomem range 0x0-0x0 could not be reserved
system 00:02: ioport range 0xb78-0xb7b has been reserved
system 00:02: ioport range 0xf78-0xf7b has been reserved
system 00:02: ioport range 0xa78-0xa7b has been reserved
system 00:02: ioport range 0xe78-0xe7b has been reserved
system 00:02: ioport range 0xbbc-0xbbf has been reserved
system 00:02: ioport range 0xfbc-0xfbf has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x290-0x30f has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
PCI: Bridge: 0000:00:09.0
  IO window: d000-dfff
  MEM window: 0xfde00000-0xfdefffff
  PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:0b.0
  IO window: c000-cfff
  MEM window: 0xfdd00000-0xfddfffff
  PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
PCI: Bridge: 0000:00:0c.0
  IO window: b000-bfff
  MEM window: 0xfdb00000-0xfdbfffff
  PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
PCI: Bridge: 0000:00:0d.0
  IO window: a000-afff
  MEM window: 0xfd900000-0xfd9fffff
  PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
PCI: Bridge: 0000:00:0e.0
  IO window: 9000-9fff
  MEM window: 0xf8000000-0xfbffffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5362k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
type=2000 audit(1226420980.712:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:0c.0: Enabling HT MSI Mapping
pci 0000:00:0c.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:0d.0: Enabling HT MSI Mapping
pci 0000:00:0d.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
vesafb: framebuffer at 0xf9000000, mapped to 0xf8880000, using 10240k, total 14336k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:aa10
vesafb: pmi: set display start = c00caa73, set palette = c00caace
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 208945 bytes
bootsplash: ...found (1280x1024, 220863 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 264k freed
Write protecting the kernel read-only data: 1436k
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (22 C)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf600 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf608 irq 23
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3250824AS, 3.AAD, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SAMSUNG HD250HJ, FH100-06, max UDMA7
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD250HJ  FH10 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf100 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf108 irq 22
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:06.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:120:0x1b)
ata5.00: configured for UDMA/33
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
ACPI: PNP0C0B:00 is registered as cooling_device2
ACPI: Fan [FAN] (on)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4 <<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
 sdb5 sdb6 sdb7 >
sd 1:0:0:0: [sdb] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.18-0.2-pae ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.18-0.2-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=057c, idProduct=5601
usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 2-1: Product: WLAN USB Device
usb 2-1: Manufacturer: AVM GmbH
usb 2-1: SerialNumber: 00040EC90CA0
hub 2-0:1.0: unable to enumerate USB device on port 4
hub 2-0:1.0: unable to enumerate USB device on port 8
usb 1-4: new low speed USB device using ohci_hcd and address 2
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: New USB device found, idVendor=0a81, idProduct=0101
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer: CHESEN
usb 1-8: new full speed USB device using ohci_hcd and address 3
usb 1-8: configuration #1 chosen from 1 choice
usb 1-8: New USB device found, idVendor=046d, idProduct=c51a
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: USB Receiver
usb 1-8: Manufacturer: Logitech
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Linux agpgart interface v0.103
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
nvidia: module license 'NVIDIA' taints kernel.
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:17:b6:02:1d
forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct  1 14:38:10 PDT 2008
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button (CM) [PWRB]
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fdefc000-fdefc7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
acx: running on a little-endian CPU
acx: PCI/VLYNQ module v0.3.37 initialized, waiting for cards to probe...
USB module v0.3.37 initialized, probing for devices...
wait for device ready
requesting firmware image 'tiacx111usbc1B'
ppdev: user-space parallel port driver
acx: firmware image 'tiacx111usbc1B' was not provided. Check your hotplug scripts
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 53747 usecs
intel8x0: clocking to 46906
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000105beb4]
acx: issue_cmd(cmd:ACX1xx_CMD_WAKE) FAILED
Pid: 728, comm: modprobe Tainted: P        N 2.6.25.18-0.2-pae #1
 [<c01071d9>] dump_trace+0x63/0x227
 [<c0107c8a>] show_trace+0x15/0x29
 [<c02e2e65>] dump_stack+0x5b/0x65
 [<f97fed05>] acxusb_s_issue_cmd_timeo_debug+0x2e7/0x31c [acx]
 [<f97ff15a>] acxusb_e_probe+0x420/0x602 [acx]
 [<f95f6d3c>] usb_probe_interface+0xc6/0x108 [usbcore]
 [<c024fe9d>] driver_probe_device+0xa0/0x136
 [<c024ff8e>] __driver_attach+0x5b/0x91
 [<c024f879>] bus_for_each_dev+0x36/0x5e
 [<c024fd42>] driver_attach+0x14/0x16
 [<c024f27e>] bus_add_driver+0x9d/0x1ba
 [<c0250104>] driver_register+0x47/0xa7
 [<f95f6f31>] usb_register_driver+0x66/0xc0 [usbcore]
 [<f96950bd>] acxusb_e_init_module+0x2b/0x2d [acx]
 [<f969501a>] acx_e_init_module+0x1a/0x2a [acx]
 [<c0145011>] sys_init_module+0x198b/0x1ab8
 [<c01059e4>] sysenter_past_esp+0x6d/0xa9
 [<ffffe430>] 0xffffe430
 =======================
initializing max packet templates
acx: issue_cmd(cmd:cmd) FAILED
Pid: 728, comm: modprobe Tainted: P        N 2.6.25.18-0.2-pae #1
 [<c01071d9>] dump_trace+0x63/0x227
 [<c0107c8a>] show_trace+0x15/0x29
 [<c02e2e65>] dump_stack+0x5b/0x65
 [<f97fed05>] acxusb_s_issue_cmd_timeo_debug+0x2e7/0x31c [acx]
 [<f97f3d70>] acx_s_init_max_template_generic+0x75/0x80 [acx]
 [<f97f3dc0>] acx_s_init_packet_templates+0x45/0x183 [acx]
 [<f97f9f50>] acx_s_init_mac+0x8c/0x6d4 [acx]
 [<f97ff165>] acxusb_e_probe+0x42b/0x602 [acx]
 [<f95f6d3c>] usb_probe_interface+0xc6/0x108 [usbcore]
 [<c024fe9d>] driver_probe_device+0xa0/0x136
 [<c024ff8e>] __driver_attach+0x5b/0x91
 [<c024f879>] bus_for_each_dev+0x36/0x5e
 [<c024fd42>] driver_attach+0x14/0x16
 [<c024f27e>] bus_add_driver+0x9d/0x1ba
 [<c0250104>] driver_register+0x47/0xa7
 [<f95f6f31>] usb_register_driver+0x66/0xc0 [usbcore]
 [<f96950bd>] acxusb_e_init_module+0x2b/0x2d [acx]
 [<f969501a>] acx_e_init_module+0x1a/0x2a [acx]
 [<c0145011>] sys_init_module+0x198b/0x1ab8
 [<c01059e4>] sysenter_past_esp+0x6d/0xa9
 [<ffffe430>] 0xffffe430
 =======================
wlan%d: acx_s_init_packet_templates() FAILED
acx: init_mac() FAILED
acx_usb: probe of 2-1:1.0 failed with error 1
usbcore: registered new interface driver hiddev
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input3
input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-4
input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.1/input/input4
input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-4
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-8/1-8:1.0/input/input5
input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb1/1-8/1-8:1.1/input/input6
input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-8
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver acx_usb
Adding 514040k swap on /dev/sdb5.  Priority:-1 extents:1 across:514040k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1226417404.800:2): operation="profile_load" name="/bin/ping" name2="default" pid=1591
type=1505 audit(1226417404.832:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1621
type=1505 audit(1226417404.928:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1622
type=1505 audit(1226417404.976:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1633
type=1505 audit(1226417405.012:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1637
type=1505 audit(1226417405.045:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1638
type=1505 audit(1226417405.081:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1639
type=1505 audit(1226417405.116:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1640
type=1505 audit(1226417405.164:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1641
type=1505 audit(1226417405.200:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1642
ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
usb 2-1: reset high speed USB device using ehci_hcd and address 2
ndiswrapper: driver fwlan (AVM GmbH,12/28/2006,2.0.6.1647) loaded
wlan0: ethernet device 00:04:0e:c9:0c:a0 using NDIS driver: fwlan, version: 0x2000c6f, NDIS version: 0x501, vendor: 'AVM FRITZ!WLAN USB Stick', 057C:5601.F.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
bootsplash: status on console 0 changed to on
wlan0: no IPv6 routers present
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 2-10: new high speed USB device using ehci_hcd and address 5
usb 2-10: configuration #1 chosen from 1 choice
usb 2-10: New USB device found, idVendor=090c, idProduct=1000
usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-10: Product: USB Drive
usb 2-10: Manufacturer: LG
usb 2-10: SerialNumber: AA04012700016474
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access     LG       USB Drive        1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdc] 3963904 512-byte hardware sectors (2030 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 3963904 512-byte hardware sectors (2030 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
usb 2-10: USB disconnect, address 5
usb 2-10: new high speed USB device using ehci_hcd and address 6
usb 2-10: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 2-10: New USB device found, idVendor=090c, idProduct=1000
usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-10: Product: USB Drive
usb 2-10: Manufacturer: LG
usb 2-10: SerialNumber: AA04012700016474
scsi 7:0:0:0: Direct-Access     LG       USB Drive        1100 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: [sdc] 3963904 512-byte hardware sectors (2030 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] 3963904 512-byte hardware sectors (2030 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete

Leider etwas viel Code, vieles davon ist sicherlich überflüssig.
Aber danke für eure Hilfe,
Bananajoe77
 
Anscheinend wird der Stick aber erkannt und geöffnet wie man hier
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 2-10: New USB device found, idVendor=090c, idProduct=1000
usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-10: Product: USB Drive
usb 2-10: Manufacturer: LG
usb 2-10: SerialNumber: AA04012700016474
scsi 7:0:0:0: Direct-Access LG USB Drive 1100 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: [sdc] 3963904 512-byte hardware sectors (2030 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] 3963904 512-byte hardware sectors (2030 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sieht! Hast Du das automatische Mounten abgeschaltet? Bei gnome weiß ich allerdings nicht wie das geht. Kuck mal hier im Forum nach policykit. Oder
Code:
 man policykit
. Vielleicht ist da ja was verbogen.

CU Freddie
 
OP
B

Bananajoe77

Newbie
Danke für den Link, ich hab mir den Tread mal durchgelesen, das was dort geholfen hat, hat leider nicht bei mir geholfen :???:
Also folgendes:
Ich habe zufällig noch die Lösung gefunden:

In der /etc/PolicyKit/PolicyKit.conf muss folgendes stehen:

Code: Alles auswählen
<config version="0.1">
<match user="userid">
<return result="yes"/>
</match>
</config>

Sonst noch Lösungsvorschläge?
 
Hmmm... Meine sieht so aus:
~> cat /etc/PolicyKit/PolicyKit.conf
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.0//EN"
"http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">



<config version="0.1">
</config>
Hatte mir das Ding mal unter 10.3 "geschossen". (Ich hatte gparted genutzt und irgendwie dabei irgendwelche Rechte hier eingetragen. Dann ging das Mounten von z.B. USB-Sticks nur noch als root. War verdammt nervig. Leider find' ich den Fred nicht mehr...
Vielleicht hilft ja meine PolicyKit.conf.

CU Freddie
 
OP
B

Bananajoe77

Newbie
Ich hab auch ein bisschen rumpartitioniert, könnte gut sein, dass es daran liegt :/
Jedoch hat deine Config leider auch nicht geholfen, die hatte ich nämlich auch davor,
Danke, Bananajoe77
 
Oben