Hallo!
Ich hab das Problem, dass seit meiner Neuinstallation von SUSE 11.0 die dynamische Taktung meines Prozessors nicht mehr funktioniert. (wie http://www.linux-club.de/viewtopic.php?f=29&t=90125)
Der Laptop ist ein Fujitsu-Siemens Amilo L 6180 - 1800 MHz.
Vielleicht hat jemand noch eine Idee was ich probieren kann. Hier die relevaten Auszüge:
Im (AMI-)Bios hab ich folgende Einstellungen (aktuellestes Bios):
Unter 'Power Management Setup'
Power Management : Enabled / Disabled (steht auf enabled - sonst ist Intel(R)SpeedStep(TM) technology nicht auswählbar, disabled hab ich aber auch schon probiert).
Optionen unter Intel(R)SpeedStep(TM) technology:
PERFORMANCE - da läuft die CPU dauerhaft auf 1.800 MHz
BATTERY - da läuft die CPU dauerhaft auf 1.200 MHz
AUTO - da läuft ebenso die CPU dauerhaft auf 1.800 MHz (unanbhängig von der Last)
DISABLED - siehe AUTO
Es hat meiner Meinung nach auf AUTO schonmal funktioniert (SuSE 10.3).
Wenn ich jetzt versuche verschiedene Module per Hand nachzuladen geht das auch teilweise:
Die CPU ist leider immer noch auf volldampf - auch nach einem rcpowersaved restart.
Nun weiss ich nicht mehr weiter und habe auch keine Idee mehr was ich probieren könnte. Vielleicht hat ja von euch noch jemand einen Vorschlag.
Danke schonmal
snubnose
Ich hab das Problem, dass seit meiner Neuinstallation von SUSE 11.0 die dynamische Taktung meines Prozessors nicht mehr funktioniert. (wie http://www.linux-club.de/viewtopic.php?f=29&t=90125)
Der Laptop ist ein Fujitsu-Siemens Amilo L 6180 - 1800 MHz.
Vielleicht hat jemand noch eine Idee was ich probieren kann. Hier die relevaten Auszüge:
Code:
rebecca@linux-mg42:~> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz
stepping : 7
cpu MHz : 1804.137
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid xtpr
bogomips : 3612.53
clflush size : 64
Code:
rebecca@linux-mg42:~> lsmod | sort
ac 22916 0
ac97_bus 18304 1 snd_ac97_codec
af_packet 38656 2
agpgart 50868 1 sis_agp
battery 31108 0
binfmt_misc 28040 1
button 25360 0
cdrom 50588 1 sr_mod
cpufreq_conservative 24456 0
cpufreq_powersave 18176 0
cpufreq_userspace 22660 0
dm_mod 78676 0
dock 27536 1 libata
edd 26440 0
ehci_hcd 52492 0
ext3 155912 2
fan 22660 0
firmware_class 25984 2 microcode,pcmcia
fuse 66332 3
i2c_core 41108 1 i2c_sis96x
i2c_sis96x 21764 0
ieee1394 107016 1 ohci1394
ip6table_filter 19712 1
ip6table_mangle 19584 0
ip6_tables 31376 3 ip6t_LOG,ip6table_mangle,ip6table_filter
ip6t_LOG 23428 7
ip6t_REJECT 21376 3
iptable_filter 19840 1
iptable_mangle 19712 0
iptable_nat 23688 0
ip_tables 30224 3 iptable_mangle,iptable_nat,iptable_filter
ipt_LOG 22788 8
ipt_REJECT 20352 3
ipv6 281064 17 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
jbd 73504 1 ext3
joydev 28224 0
libata 176604 1 pata_sis
loop 35332 0
mbcache 25348 1 ext3
microcode 30608 0
mii 21888 1 sis900
Module Size Used by
nf_conntrack 79188 6 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_conntrack_ipv4 27652 7 iptable_nat,nf_nat
nf_conntrack_ipv6 33528 4
nf_conntrack_netbios_ns 19200 0
nf_nat 35736 1 iptable_nat
ohci1394 48432 0
ohci_hcd 39940 0
pata_sis 30212 4
pci_hotplug 46116 1 shpchp
pcmcia 55924 0
pcmcia_core 55188 3 pcmcia,yenta_socket,rsrc_nonstatic
processor 67504 2 thermal
rsrc_nonstatic 29696 1 yenta_socket
rtc_cmos 27168 0
rtc_core 37148 1 rtc_cmos
rtc_lib 19328 1 rtc_core
scsi_mod 168436 4 sr_mod,sg,sd_mod,libata
sd_mod 45208 5
serio_raw 23428 0
sg 52020 0
shpchp 50196 0
sis900 39296 0
sis_agp 26240 1
snd 79544 21 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_ac97_codec 120868 2 snd_intel8x0m,snd_intel8x0
snd_intel8x0 50460 1
snd_intel8x0m 34444 6
snd_mixer_oss 33408 1 snd_pcm_oss
snd_page_alloc 27400 3 snd_intel8x0m,snd_intel8x0,snd_pcm
snd_pcm 100100 6 snd_pcm_oss,snd_intel8x0m,snd_intel8x0,snd_ac97_codec
snd_pcm_oss 64256 0
snd_seq 73664 0
snd_seq_device 25100 1 snd_seq
snd_timer 40712 2 snd_seq,snd_pcm
soundcore 24264 1 snd
sr_mod 33320 0
thermal 40348 0
usbcore 164812 3 ehci_hcd,ohci_hcd
x_tables 33668 11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
xt_limit 19076 15
xt_pkttype 18304 3
xt_state 18944 8
xt_tcpudp 19584 2
yenta_socket 43020 1
Im (AMI-)Bios hab ich folgende Einstellungen (aktuellestes Bios):
Unter 'Power Management Setup'
Power Management : Enabled / Disabled (steht auf enabled - sonst ist Intel(R)SpeedStep(TM) technology nicht auswählbar, disabled hab ich aber auch schon probiert).
Optionen unter Intel(R)SpeedStep(TM) technology:
PERFORMANCE - da läuft die CPU dauerhaft auf 1.800 MHz
BATTERY - da läuft die CPU dauerhaft auf 1.200 MHz
AUTO - da läuft ebenso die CPU dauerhaft auf 1.800 MHz (unanbhängig von der Last)
DISABLED - siehe AUTO
Es hat meiner Meinung nach auf AUTO schonmal funktioniert (SuSE 10.3).
Wenn ich jetzt versuche verschiedene Module per Hand nachzuladen geht das auch teilweise:
Code:
linux-mg42:/home/rebecca # modprobe cpufreq_userspace
linux-mg42:/home/rebecca # modprobe cpufreq_powersave
linux-mg42:/home/rebecca # modprobe cpufreq_conservative
linux-mg42:/home/rebecca # modprobe speedstep_smi
FATAL: Error inserting speedstep_smi (/lib/modules/2.6.25.11-0.1-pae/kernel/arch/x86/kernel/cpu/cpufreq/speedstep-smi.ko): No such device
linux-mg42:/home/rebecca # modprobe speedstep-ich
FATAL: Error inserting speedstep_ich (/lib/modules/2.6.25.11-0.1-pae/kernel/arch/x86/kernel/cpu/cpufreq/speedstep-ich.ko): No such device
Die CPU ist leider immer noch auf volldampf - auch nach einem rcpowersaved restart.
Nun weiss ich nicht mehr weiter und habe auch keine Idee mehr was ich probieren könnte. Vielleicht hat ja von euch noch jemand einen Vorschlag.
Danke schonmal
snubnose