Hallo Leute,
ich bin dabei Windows (außer in Form von VMware) von meinem Rechner zu schmeißen
Wie auch immer...
Was mich allerdings bis jetzt noch daran hindert, dass ist mien Pinnacle 500-USB Device.
Hat wer es unter SuSE 10.3 64bit am Rennen?
Würde mich über jeglichen Tip freuen.
Wenn es nicht gehen sollte, besteht eine Möglichkeit USB Devices, wie WebCam, Dazzle und der Gleichen unter VMware anzusprechen?
Bisher gelang es mir nur mit USB-Laufwerke.
Hardware Details:
----- hal device list -----
0: udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial_if0'
usb.version_bcd = 512 (0x200)
usb.is_self_powered = false
usb.linux.device_number = 6 (0x6)
usb.product = 'USB Vendor Specific Interface'
usb.device_protocol = 255 (0xff)
linux.subsystem = 'usb'
usb.device_revision_bcd = 0 (0x0)
info.product = 'USB Vendor Specific Interface'
usb.bus_number = 3 (0x3)
usb.interface.class = 255 (0xff)
usb.configuration_value = 1 (0x1)
usb.num_interfaces = 1 (0x1)
info.parent = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial'
usb.interface.subclass = 0 (0x0)
usb.num_configurations = 1 (0x1)
usb.device_subclass = 255 (0xff)
usb.version = 2.00000
usb.vendor_id = 8964 (0x2304)
usb.vendor = 'Pinnacle Systems, Inc. [hex]'
info.subsystem = 'usb'
usb.device_class = 255 (0xff)
usb.can_wake_up = false
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1/3-1:1.0'
usb.speed = 480.000
usb.num_ports = 0 (0x0)
usb.speed_bcd = 294912 (0x48000)
usb.max_power = 300 (0x12c)
info.udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial_if0'
info.bus = 'usb'
linux.hotplug_type = 2 (0x2)
usb.interface.number = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1/3-1:1.0'
usb.product_id = 531 (0x213)
usb.interface.protocol = 0 (0x0)
1: udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial'
linux.subsystem = 'usb'
info.product = 'Pinnacle High Speed USB Device'
usb_device.device_revision_bcd = 0 (0x0)
usb_device.product = 'Pinnacle High Speed USB Device'
usb_device.product_id = 531 (0x213)
usb_device.speed = 480.000
usb_device.vendor = 'Pinnacle Systems, Inc. [hex]'
usb_device.can_wake_up = false
usb_device.configuration_value = 1 (0x1)
usb_device.linux.device_number = 6 (0x6)
info.linux.driver = 'usb'
usb_device.device_class = 255 (0xff)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_4'
usb_device.bus_number = 3 (0x3)
usb_device.device_protocol = 255 (0xff)
usb_device.is_self_powered = false
info.subsystem = 'usb_device'
info.vendor = 'Pinnacle Systems, Inc. [hex]'
usb_device.version = 2.00000
usb_device.num_interfaces = 1 (0x1)
usb_device.vendor_id = 8964 (0x2304)
usb_device.speed_bcd = 294912 (0x48000)
usb_device.version_bcd = 512 (0x200)
info.udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1'
usb_device.num_configurations = 1 (0x1)
info.bus = 'usb_device'
linux.device_file = '/dev/bus/usb/003/006'
usb_device.num_ports = 0 (0x0)
usb_device.max_power = 300 (0x12c)
linux.hotplug_type = 2 (0x2)
usb_device.device_subclass = 255 (0xff)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1'
Gruß
JoKurt
ich bin dabei Windows (außer in Form von VMware) von meinem Rechner zu schmeißen
Wie auch immer...
Was mich allerdings bis jetzt noch daran hindert, dass ist mien Pinnacle 500-USB Device.
Hat wer es unter SuSE 10.3 64bit am Rennen?
Würde mich über jeglichen Tip freuen.
Wenn es nicht gehen sollte, besteht eine Möglichkeit USB Devices, wie WebCam, Dazzle und der Gleichen unter VMware anzusprechen?
Bisher gelang es mir nur mit USB-Laufwerke.
Hardware Details:
----- hal device list -----
0: udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial_if0'
usb.version_bcd = 512 (0x200)
usb.is_self_powered = false
usb.linux.device_number = 6 (0x6)
usb.product = 'USB Vendor Specific Interface'
usb.device_protocol = 255 (0xff)
linux.subsystem = 'usb'
usb.device_revision_bcd = 0 (0x0)
info.product = 'USB Vendor Specific Interface'
usb.bus_number = 3 (0x3)
usb.interface.class = 255 (0xff)
usb.configuration_value = 1 (0x1)
usb.num_interfaces = 1 (0x1)
info.parent = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial'
usb.interface.subclass = 0 (0x0)
usb.num_configurations = 1 (0x1)
usb.device_subclass = 255 (0xff)
usb.version = 2.00000
usb.vendor_id = 8964 (0x2304)
usb.vendor = 'Pinnacle Systems, Inc. [hex]'
info.subsystem = 'usb'
usb.device_class = 255 (0xff)
usb.can_wake_up = false
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1/3-1:1.0'
usb.speed = 480.000
usb.num_ports = 0 (0x0)
usb.speed_bcd = 294912 (0x48000)
usb.max_power = 300 (0x12c)
info.udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial_if0'
info.bus = 'usb'
linux.hotplug_type = 2 (0x2)
usb.interface.number = 0 (0x0)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1/3-1:1.0'
usb.product_id = 531 (0x213)
usb.interface.protocol = 0 (0x0)
1: udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial'
linux.subsystem = 'usb'
info.product = 'Pinnacle High Speed USB Device'
usb_device.device_revision_bcd = 0 (0x0)
usb_device.product = 'Pinnacle High Speed USB Device'
usb_device.product_id = 531 (0x213)
usb_device.speed = 480.000
usb_device.vendor = 'Pinnacle Systems, Inc. [hex]'
usb_device.can_wake_up = false
usb_device.configuration_value = 1 (0x1)
usb_device.linux.device_number = 6 (0x6)
info.linux.driver = 'usb'
usb_device.device_class = 255 (0xff)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_4'
usb_device.bus_number = 3 (0x3)
usb_device.device_protocol = 255 (0xff)
usb_device.is_self_powered = false
info.subsystem = 'usb_device'
info.vendor = 'Pinnacle Systems, Inc. [hex]'
usb_device.version = 2.00000
usb_device.num_interfaces = 1 (0x1)
usb_device.vendor_id = 8964 (0x2304)
usb_device.speed_bcd = 294912 (0x48000)
usb_device.version_bcd = 512 (0x200)
info.udi = '/org/freedesktop/Hal/devices/usb_device_2304_213_noserial'
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1'
usb_device.num_configurations = 1 (0x1)
info.bus = 'usb_device'
linux.device_file = '/dev/bus/usb/003/006'
usb_device.num_ports = 0 (0x0)
usb_device.max_power = 300 (0x12c)
linux.hotplug_type = 2 (0x2)
usb_device.device_subclass = 255 (0xff)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.4/usb3/3-1'
Gruß
JoKurt