• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

[gelöst] Soundkarte macht keinen Laut nach Update ...

gelau

Newbie
Hallo,

habe ein Problem: Nach einem Update gibt meine Soundkarte keinen Laut mehr von sich und kmix zeigt keinen Lautstärkeregler.

hwinfo --sound liefert:

linux-0cnx:~ # hwinfo --sound
12: PCI 1b.0: 0403 Audio device
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_8086_27d8
Unique ID: u1Nb.Q4x6jc7hr+E
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Hewlett-Packard Company 82801G (ICH7 Family) High Definition Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30d5
Revision: 0x01
Memory Range: 0xf0580000-0xf0583fff (rw,non-prefetchable)
IRQ: 10 (no events)
Module Alias: "pci:v00008086d000027D8sv0000103Csd000030D5bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is not active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=no, avail=yes, need=no, active=unknown

Kommt mir vor, als wäre kein Treiber da, oder?

Kann mir jemand helfen ? Bitte allerdings um Nachsicht, da ich erst seit kurzem unter Linux arbeite und noch nicht so fit bin.

Schönen Dank
Gerhard

Betriebssystem: Linux 2.6.22.17-0.1-default i686
System: openSUSE 10.3 (i586)
KDE: 3.5.7 "release 72.6"
 

Nukem36

Hacker
High!

na als Linx-Neuling lieferst Du dafür gleich die erf. Info's! Doppellob :)

Mach mal als root in der Konsole

Code:
modprobe snd_hda_intel

Dann nachsehen ob kmix Regler anzeigt. Sollte das der Fall sein, lösche einfach im Yast deine Soundkarte und lege sie neu an.

Nukem36
 
OP
G

gelau

Newbie
Hi Nukem36,

das Ergebis von modprobe war folgendes:

linux-0cnx:~ # modprobe snd_hda_intel
FATAL: Error inserting snd_hda_intel (/lib/modules/2.6.22.17-0.1-default/weak-updates/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg)

Hat jemand einen Rat für mich?

Schönen Gruß
Gerhard
 

whois

Ultimate Guru
Hi Gerhrad

Stell doch bitte mal das Eregebnis davon in Board.

Code:
lsmod |grep snd und dmesg

cu
 
OP
G

gelau

Newbie
Hi,

zunächst einmal danke, dass Ihr Euch Zeit nehmt.

Und nun der Reihe nach:

linux-0cnx:~ # lsmod | grep snd und dmesg[/b]
grep: und: No such file or directory
grep: dmesg: No such file or directory

lieferte kein Ergebnis.

Habe es dann einzeln versucht:
_____________________________________________
linux-0cnx:~ # lsmod | grep snd
snd_pcm_oss 50432 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_seq 54452 0
snd_seq_device 12172 1 snd_seq
snd_pcm 82564 1 snd_pcm_oss
snd_timer 26756 2 snd_seq,snd_pcm
snd 58164 6 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 11460 1 snd
snd_page_alloc 14472 1 snd_pcm

__________________________________________________
linux-0cnx:~ # lsmod | dmesg
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 260048) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 260048
early_node_map[1] active PFN ranges
0: 0 -> 260048
On node 0 totalpages: 260048
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 239 pages used for memmap
HighMem zone: 30433 pages, LIFO batch:7
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000F7830, 0024 (r2 HP )
ACPI: XSDT 3F7E57C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: FACP 3F7E5684, 00F4 (r4 HP 30D5 3 HP 1)
ACPI: DSDT 3F7E5ACC, E974 (r1 HP hp 520 10000 MSFT 100000E)
ACPI: FACS 3F7F7E80, 0040
ACPI: SLIC 3F7E5844, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
ACPI: HPET 3F7E59BC, 0038 (r1 HP 30D5 1 HP 1)
ACPI: APIC 3F7E59F4, 0068 (r1 HP 30D5 1 HP 1)
ACPI: MCFG 3F7E5A5C, 003C (r1 HP 30D5 1 HP 1)
ACPI: TCPA 3F7E5A98, 0032 (r2 HP 30D5 1 HP 1)
ACPI: SSDT 3F7F4440, 0024 (r1 HP HPQNLP 1 MSFT 100000E)
ACPI: SSDT 3F7F4464, 0326 (r1 HP HPQSAT 1 MSFT 100000E)
ACPI: SSDT 3F7F478A, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317)
ACPI: SSDT 3F7F4C55, 025F (r1 HP Cpu0Tst 3000 INTL 20060317)
ACPI: SSDT 3F7F4EB4, 04D7 (r1 HP CpuPm 3000 INTL 20060317)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
Built 1 zonelists. Total pages: 258017
Kernel command line: root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2282KGEMDM4H-part1 resume=/dev/sda5 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1862.021 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023104k/1040192k available (1829k kernel code, 16372k reserved, 764k data, 228k init, 122688k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0390000 - 0xc03c9000 ( 228 kB)
.data : 0xc02c95cb - 0xc0388964 ( 764 kB)
.text : 0xc0100000 - 0xc02c95cb (1829 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3728.09 BogoMIPS (lpj=7456190)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs... done
Freeing initrd memory: 3968k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1035 Objects with 71 Devices 328 Methods 34 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 0 Objects with 0 Devices 0 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 17 Objects with 4 Devices 5 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 1 Objects with 0 Devices 1 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0006) - 14 Objects with 0 Devices 5 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz stepping 0c
Total of 1 processors activated (3728.09 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=16
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 8 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:....................................................................................................................................................
Initialized 29/34 Regions 0/0 Fields 62/63 Buffers 57/60 Packages (1083 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:.......
Executed 7 _INI methods requiring 2 _STA executions (examined 84 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1100-113f claimed by ICH6 GPIO
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C100._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C110._PRT]
ACPI: PCI Interrupt Link [C10C] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10F] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C11D] (IRQs *10 11)
ACPI: PCI Interrupt Link [C11E] (IRQs 10 11) *0, disabled.
ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
ACPI: Power Resource [C1FE] (on)
ACPI: Power Resource [C206] (on)
ACPI: Power Resource [C2EE] (off)
ACPI: Power Resource [C2EF] (off)
ACPI: Power Resource [C2F0] (off)
ACPI: Power Resource [C2F1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f0000000-f00fffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 40000000-43ffffff
MEM window: 44000000-47ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: f0100000-f03fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
Switched to NOHz mode on CPU #0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1204430233.444:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:C1FB,PNP0f13:C1FC] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
Marking TSC unstable due to: possible TSC halt in C2.
ACPI: Thermal Zone [TZ0] (54 C)
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZ1] (50 C)
ACPI: Thermal Zone [TZ2] (45 C)
ACPI: Thermal Zone [TZ3] (26 C)
ACPI: Thermal Zone [TZ4] (37 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 21 (level, low) -> IRQ 19
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: AT Translated Set 2 keyboard as /class/input/input2
Clocksource tsc unstable (delta = -450532634 ns)
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf883e100 ctl 0x00000000 bmdma 0x00000000 irq 221
ata2: SATA max UDMA/133 cmd 0xf883e180 ctl 0x00000000 bmdma 0x00000000 irq 221
ata3: SATA max UDMA/133 cmd 0xf883e200 ctl 0x00000000 bmdma 0x00000000 irq 221
ata4: SATA max UDMA/133 cmd 0xf883e280 ctl 0x00000000 bmdma 0x00000000 irq 221
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7BP, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013040 irq 14
ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013048 irq 15
ata5.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2
ata5.00: configured for MWDMA2
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 ANSI: 5
ACPI: Transitioning device [C2F2] to D3
ACPI: Transitioning device [C2F2] to D3
ACPI: Fan [C2F2] (off)
ACPI: Transitioning device [C2F3] to D3
ACPI: Transitioning device [C2F3] to D3
ACPI: Fan [C2F3] (off)
ACPI: Transitioning device [C2F4] to D3
ACPI: Transitioning device [C2F4] to D3
ACPI: Fan [C2F4] (off)
ACPI: Transitioning device [C2F5] to D3
ACPI: Transitioning device [C2F5] to D3
ACPI: Fan [C2F5] (off)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003020
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0584000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: new device found, idVendor=04d9, idProduct=0499
usb 1-2: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
kjournald starting. Commit interval 5 seconds
input: HID 04d9:0499 as /class/input/input3
input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ndiswrapper version 1.47 loaded (smp=yes)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:05 failed with error -16
Linux agpgart interface v0.102 (c) Dave Jones
ndiswrapper: driver bcmwl5 (Broadcom,11/02/2005, 4.10.40.0) loaded
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:10:00.0 to 64
ndiswrapper: using IRQ 17
intel_rng: FWH not detected
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [C20B]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [C20C]
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
iTCO_vendor_support: vendor-support=0
snd_hda_intel: no version for "struct_module" found: kernel tainted.
snd_hda_intel: Unknown symbol snd_hda_bus_new
snd_hda_intel: Unknown symbol snd_hda_build_pcms
snd_hda_intel: Unknown symbol snd_hda_codec_new
snd_hda_intel: Unknown symbol snd_hda_queue_unsol_event
snd_hda_intel: Unknown symbol snd_hda_calc_stream_format
snd_hda_intel: Unknown symbol snd_hda_suspend
snd_hda_intel: Unknown symbol snd_hda_codec_remove_notify_all
snd_hda_intel: Unknown symbol snd_hda_resume
snd_hda_intel: Unknown symbol snd_hda_build_controls
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
wlan0: ethernet device 00:1a:73:cf:71:11 using NDIS driver: bcmwl5, version: 0x40a2800, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new interface driver ndiswrapper
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30d5]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01be1b32, devctl 0x44
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
wlan0 renamed to eth0
ndiswrapper: changing interface name from 'wlan0' to 'eth0'
udev: renamed network interface wlan0 to eth0
ACPI: Battery Slot [C1AC] (battery present)
ACPI: AC Adapter [C1AB] (on-line)
Yenta: ISA IRQ mask 0x04f8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf03fffff
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
e100: eth1: e100_probe: addr 0xf0101000, irq 20, MAC addr 00:1B:38:93:DD:87
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
AppArmor: AppArmor initialized
audit(1204430248.136:2): type=1505 info="AppArmor initialized" pid=1904
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8126 buckets, 65008 max)
snd_hda_intel: Unknown symbol snd_hda_bus_new
snd_hda_intel: Unknown symbol snd_hda_build_pcms
snd_hda_intel: Unknown symbol snd_hda_codec_new
snd_hda_intel: Unknown symbol snd_hda_queue_unsol_event
snd_hda_intel: Unknown symbol snd_hda_calc_stream_format
snd_hda_intel: Unknown symbol snd_hda_suspend
snd_hda_intel: Unknown symbol snd_hda_codec_remove_notify_all
snd_hda_intel: Unknown symbol snd_hda_resume
snd_hda_intel: Unknown symbol snd_hda_build_controls
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ADDRCONF(NETDEV_UP): eth1: link is not ready
audit(1204430286.639:3): audit_pid=3465 old=0 by auid=4294967295
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
NET: Registered protocol family 17
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=371 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=351
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=371 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=351
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=371 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=351
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=341 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=321
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=386 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=366
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=182 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=162
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.42.210.80 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:c2:f0:d1:6d:08:00 SRC=10.42.210.30 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=6295 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:c2:f0:d1:6d:08:00 SRC=10.42.210.30 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=6297 OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:c2:f0:d1:6d:08:00 SRC=10.42.210.30 DST=224.0.0.251 LEN=90 TOS=0x18 PREC=0x00 TTL=255 ID=6299 PROTO=UDP SPT=5353 DPT=5353 LEN=70
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:c2:f0:d1:6d:08:00 SRC=10.42.210.30 DST=224.0.0.251 LEN=107 TOS=0x18 PREC=0x00 TTL=255 ID=6300 PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:c2:f0:d1:6d:08:00 SRC=10.42.210.30 DST=224.0.0.251 LEN=90 TOS=0x18 PREC=0x00 TTL=255 ID=6301 PROTO=UDP SPT=5353 DPT=5353 LEN=70
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1e:c2:f0:d1:6d:08:00 SRC=10.42.210.30 DST=224.0.0.251 LEN=123 TOS=0x18 PREC=0x00 TTL=255 ID=6340 PROTO=UDP SPT=5353 DPT=5353 LEN=103

und schliesslich noch:
__________________________________________________
linux-0cnx:~ # rpm -qa | grep alsa
alsa-plugins-1.0.14-41
alsa-firmware-1.0.14-24
alsa-utils-1.0.14-27
alsa-devel-1.0.14-31.2
alsa-1.0.14-31.2
alsa-oss-1.0.14-23

Ich hoffe es war so OK.

Gruß
Gerhard


[/quote]
 

revealed

Guru
lade dir mal bitte via yast "also-tools" dazu?
und:
Code:
cat /etc/modprobe.d/sound
?
und was passiert, wenn du als SU
Code:
alsaconf
ausführst?

Code:
uname -rio

Gruß

R
 
OP
G

gelau

Newbie
1. Habe "alsa-tools" mit yast installiert.
Ergebniss: zumindest kein sicht- oder hörbares

2.
linux-0cnx:~ # cat /etc/modprobe.d/sound
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
linux-0cnx:~ #

3.
linux-0cnx:~ # alsaconf

┌──────────────────────────Soundcard Selection─────────────────────────────┐
│ │
│ Following card(s) are found on your system. │
│ Choose a soundcard to configure: │
│ ┌──────────────────────────────────────────────────────────────────────┐ │
│ │hda-intel Intel Corporation 82801G (ICH7 Family) High Definition Audi│ │
│ │legacy Probe legacy ISA (non-PnP) chips │ │

Loading driver...
Starting sound driver: hda-intelFATAL: Error inserting snd_hda_intel (/lib/modules/2.6.22.17-0.1-default/weak-updates/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg)
failed
Setting default volumes...
amixer: Mixer attach default error: No such device

ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_concat returned error: No such device
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_refer returned error: No such device
ALSA lib conf.c:3982:(snd_config_expand) Evaluate error: No such device
ALSA lib pcm.c:2145:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:546: audio open error: No such device

4.
linux-0cnx:~ # uname -rio
2.6.22.17-0.1-default i386 GNU/Linux
linux-0cnx:~ #


Schönen Gruß
Gerhard
 
OP
G

gelau

Newbie
Hallo,

danke an alle, die mir geantwortet haben.

Habe noch ein wenig im Internet gestöbert und bin dann wie hier beschrieben vorgegangen

http://en.opensuse.org/AudioTroubleshooting#Updating_alsa_via_rpm

Nach einem Neustart sieht es nun wie folgt aus:

linux-0cnx:~ # rpm -qa | grep alsa
alsa-plugins-1.0.14-41
alsa-driver-kmp-default-1.0.16.hg20080301_2.6.22.17_0.1-1.1
alsa-1.0.16.hg20080301-1.1
alsa-devel-1.0.14-31.2
alsa-tools-gui-1.0.14-38
alsa-firmware-1.0.16.hg20080206-1.1
alsa-tools-1.0.16.hg20080122-7.6
alsa-oss-1.0.14-23
alsa-utils-1.0.16.hg20080226-1.2

linux-0cnx:~ # hwinfo --sound
12: PCI 1b.0: 0403 Audio device
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_8086_27d8
Unique ID: u1Nb.Q4x6jc7hr+E
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Hewlett-Packard Company 82801G (ICH7 Family) High Definition Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30d5
Revision: 0x01
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xf0580000-0xf0583fff (rw,non-prefetchable)
IRQ: 16 (17039 events)
Module Alias: "pci:v00008086d000027D8sv0000103Csd000030D5bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active


Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=no, avail=yes, need=no, active=unknown

Jetzt höre ich auch wieder etwas. Nur ist es etwas leise (war aber vorher auch so), obwohl der Regler von KMIX auf max steht.

Schönen Gruß
Gerhard
 
Oben