• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Suse 10.3 und kein Sound

Kurt M

Hacker
ich weiß dieses Thema wurde schon oft durchgekaut, und es finden sich massenweise Infos in google und hier im Forum. Leider half das alles nichts, immer noch kein Sound.

Ich habe die Creative Audigy LS. Unter Suse 10.2 lief sie problemlos.
Nach dem Update auf 10.3 macht sie keinen Sound mehr.
Vielleicht hat einer von Euch den entscheidenden Tip.

Hier die evt benötigten Infos:

* der Onboard-Sound vom Mainboard ist im Bios deaktiviert
* alsa-tools und alsa-firmware nachinstalliert (half auf meinem Notebook, hier leider nicht)
* die Soundkarte wird von Yast erkannt und als Karte Nr.0 konfiguriert. Fehlermeldung gibt es keine.
* Konfiguration mehrfach in Yast und auch mit alsaconf durchgeführt. Keine Fehlermeldungen.

Ausgabe von dmesg (sieht das nach einem Fehler aus ?):
(diese Ausgabe zeigt sich, wenn man die Soundkarte in Yast (oder alsaconf) konfiguriert.)
Code:
ACPI: PCI interrupt for device 0000:02:0b.0 disabled
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ALSA sound/pci/emu10k1/emufx.c:1528: Installing spdif_bug patch: Audigy 2 ZS [SB0350]


Ausgabe von lsmod:
Code:
snd_pcm_oss            50432  0
snd_mixer_oss          20096  1 snd_pcm_oss
snd_seq_midi           13440  0
snd_emu10k1_synth      11904  0
snd_emux_synth         37760  1 snd_emu10k1_synth
snd_seq_virmidi        10880  1 snd_emux_synth
snd_seq_midi_event     10880  2 snd_seq_midi,snd_seq_virmidi
snd_seq_midi_emul      10240  1 snd_emux_synth
snd_seq                54452  5 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul
snd_emu10k1           132868  1 snd_emu10k1_synth
snd_rawmidi            28416  3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_ac97_codec         97060  1 snd_emu10k1
snd_pcm                82564  3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_seq_device         12172  6 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq,snd_emu10k1,snd_rawmidi
snd_timer              26756  3 snd_seq,snd_emu10k1,snd_pcm
snd_util_mem            9088  2 snd_emux_synth,snd_emu10k1
snd_hwdep              13316  2 snd_emux_synth,snd_emu10k1
snd                    58164  16 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_util_mem,snd_hwdep
.
.
.
firmware_class         13568  2 snd_emu10k1,microcode
ac97_bus                6272  1 snd_ac97_codec
snd_page_alloc         14472  2 snd_emu10k1,snd_pcm
soundcore              11460  1 snd

Ausgabe von ls -l /dev/snd:
Code:
crw-rw----+ 1 root audio 116, 14 20. Dez 19:23 controlC0
crw-rw----+ 1 root audio 116,  3 20. Dez 19:23 hwC0D0
crw-rw----+ 1 root audio 116, 16 20. Dez 19:23 hwC0D2
crw-rw----+ 1 root audio 116,  5 20. Dez 19:23 midiC0D0
crw-rw----+ 1 root audio 116,  4 20. Dez 19:23 midiC0D1
crw-rw----+ 1 root audio 116, 17 20. Dez 19:23 midiC0D2
crw-rw----+ 1 root audio 116, 18 20. Dez 19:23 midiC0D3
crw-rw----+ 1 root audio 116, 13 20. Dez 19:23 pcmC0D0c
crw-rw----+ 1 root audio 116, 12 20. Dez 19:23 pcmC0D0p
crw-rw----+ 1 root audio 116, 11 20. Dez 19:23 pcmC0D1c
crw-rw----+ 1 root audio 116, 10 20. Dez 19:23 pcmC0D2c
crw-rw----+ 1 root audio 116,  9 20. Dez 19:23 pcmC0D2p
crw-rw----+ 1 root audio 116,  8 20. Dez 19:23 pcmC0D3p
crw-rw----+ 1 root audio 116,  7 20. Dez 19:23 pcmC0D4c
crw-rw----+ 1 root audio 116,  6 20. Dez 19:23 pcmC0D4p
crw-rw----+ 1 root audio 116, 15 20. Dez 19:23 seq
crw-rw----+ 1 root audio 116,  2 20. Dez 19:23 timer

Ausgabe von ls /proc/asound:
Code:
lrwxrwxrwx  1 root root 5 20. Dez 19:38 Audigy2 -> card0
dr-xr-xr-x 11 root root 0 20. Dez 19:38 card0
-r--r--r--  1 root root 0 20. Dez 19:38 cards
-r--r--r--  1 root root 0 20. Dez 19:38 devices
-r--r--r--  1 root root 0 20. Dez 19:38 hwdep
-r--r--r--  1 root root 0 20. Dez 19:38 modules
dr-xr-xr-x  2 root root 0 20. Dez 19:38 oss
-r--r--r--  1 root root 0 20. Dez 19:38 pcm
dr-xr-xr-x  2 root root 0 20. Dez 19:38 seq
-r--r--r--  1 root root 0 20. Dez 19:38 timers
-r--r--r--  1 root root 0 20. Dez 19:38 version

Ausgabe von ls /proc/asound/card0 -l:
Code:
-r--r--r--  1 root root    0 20. Dez 19:39 capture-rates
dr-xr-xr-x  2 root root    0 20. Dez 19:39 codec97#0
-r--r--r--  1 root root    0 20. Dez 19:39 emu10k1
-r--r--r--  1 root root    0 20. Dez 19:39 fx8010_acode
-r--r--r--  1 root root 8192 20. Dez 19:39 fx8010_code
-r--r--r--  1 root root 2048 20. Dez 19:39 fx8010_gpr
-r--r--r--  1 root root 1024 20. Dez 19:39 fx8010_tram_addr
-r--r--r--  1 root root 1024 20. Dez 19:39 fx8010_tram_data
-r--r--r--  1 root root    0 20. Dez 19:39 id
-rw-r--r--  1 root root    0 20. Dez 19:39 io_regs
-r--r--r--  1 root root    0 20. Dez 19:39 midi0
-r--r--r--  1 root root    0 20. Dez 19:39 midi1
-r--r--r--  1 root root    0 20. Dez 19:39 midi2
-r--r--r--  1 root root    0 20. Dez 19:39 midi3
-rw-r--r--  1 root root    0 20. Dez 19:39 oss_mixer
dr-xr-xr-x  3 root root    0 20. Dez 19:39 pcm0c
dr-xr-xr-x 34 root root    0 20. Dez 19:39 pcm0p
dr-xr-xr-x  3 root root    0 20. Dez 19:39 pcm1c
dr-xr-xr-x  3 root root    0 20. Dez 19:39 pcm2c
dr-xr-xr-x 10 root root    0 20. Dez 19:39 pcm2p
dr-xr-xr-x  3 root root    0 20. Dez 19:39 pcm3p
dr-xr-xr-x  3 root root    0 20. Dez 19:39 pcm4c
dr-xr-xr-x  3 root root    0 20. Dez 19:39 pcm4p
-rw-r--r--  1 root root    0 20. Dez 19:39 ptr_regs00a
-rw-r--r--  1 root root    0 20. Dez 19:39 ptr_regs00b
-rw-r--r--  1 root root    0 20. Dez 19:39 ptr_regs20a
-rw-r--r--  1 root root    0 20. Dez 19:39 ptr_regs20b
-rw-r--r--  1 root root    0 20. Dez 19:39 ptr_regs20c
-r--r--r--  1 root root    0 20. Dez 19:39 spdif-in
-r--r--r--  1 root root    0 20. Dez 19:39 voices
-r--r--r--  1 root root    0 20. Dez 19:39 wavetableD1

wäre schön wenn jemand noch einen Tipp hätte,
und ja, die Lautsprecher sind angeschlossen und betriebsbereit :D
 
OP
Kurt M

Kurt M

Hacker
ja,ist er. Aber auch root kann keinen Ton erzeugen.
Was man so in google liest, scheint es ein Problem mit dem Kernel zu geben, da werden wir wohl noch warten müssen.
Ich hab etwas zu schnell auf 10.3 aufgerüstet, unter 10.2 gab es viele Probleme noch nicht.
 
Oben