dma67
Hacker
Hallo Leute,
meine Festplatte spinnt. Bis vor kurzem ist alles wunderbar gelaufen. Nach der letzten Kernelaktuallisation geht es nicht, die Platte zu formattieren.
Wenn ich bei der Installation Partiotionen anlege und diese formattiert werden, bleibt das system Hängen.
Daraufhin fomattierte ich die Platte mit Knoppix (ntfs) und Windows ließ sich auch nicht installieren.
Die Ausgabe
Ist sie eindeutig hinüber?
meine Festplatte spinnt. Bis vor kurzem ist alles wunderbar gelaufen. Nach der letzten Kernelaktuallisation geht es nicht, die Platte zu formattieren.
Wenn ich bei der Installation Partiotionen anlege und diese formattiert werden, bleibt das system Hängen.
Daraufhin fomattierte ich die Platte mit Knoppix (ntfs) und Windows ließ sich auch nicht installieren.
Die Ausgabe
Code:
root@Knoppix:/ramdisk/home/knoppix# smartctl -a /dev/hda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM Deskstar 40GV & 75GXP series (all other firmware)
Device Model: IBM-DTLA-307045
Serial Number: YMDYMTA7887
Firmware Version: TX6OA50C
User Capacity: 46,115,758,080 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Tue Nov 13 09:44:55 2007 EST
==> WARNING: IBM Deskstar 40GV and 75GXP drives may need upgraded SMART firmware.
Please see http://www.geocities.com/dtla_update/ and
http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or
http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2294) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 28) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 095 095 060 Pre-fail Always - 10
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 173 173 024 Pre-fail Always - 133 (Average 201)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1839
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 79
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1086
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1839
192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 1839
193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 1839
194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 089 089 000 Old_age Always - 352
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 25
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 445 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 445 occurred at disk power-on lifetime: 1086 hours (45 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 02 b7 03 00 e0 Error: IDNF 2 sectors at LBA = 0x000003b7 = 951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 02 b7 03 00 e0 00 00:12:17.200 READ DMA
ca 03 08 1f 2a af e2 00 00:12:17.200 WRITE DMA
ca 03 80 cf 08 af e0 00 00:12:17.200 WRITE DMA
ca 03 80 0f 07 af e0 00 00:12:17.200 WRITE DMA
ca 03 80 4f 06 af e0 00 00:12:17.200 WRITE DMA
Error 444 occurred at disk power-on lifetime: 1086 hours (45 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 02 b7 03 00 e0 Error: IDNF 2 sectors at LBA = 0x000003b7 = 951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 03 02 b7 03 00 e0 00 00:12:09.600 READ DMA
ca 03 80 e7 f3 ae e0 00 00:12:09.300 WRITE DMA
ca 03 80 67 f3 ae e0 00 00:12:09.300 WRITE DMA
ca 03 80 e7 f2 ae e0 00 00:12:09.300 WRITE DMA
ca 03 80 67 f2 ae e0 00 00:12:09.300 WRITE DMA
Error 443 occurred at disk power-on lifetime: 1086 hours (45 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 3b b5 03 00 e0 Error: IDNF at LBA = 0x000003b5 = 949
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 3f b1 03 00 e0 00 00:01:41.700 READ VERIFY SECTOR(S)
c5 00 01 78 03 00 e0 00 00:01:41.700 WRITE MULTIPLE
c5 00 01 72 03 00 e0 00 00:01:41.700 WRITE MULTIPLE
40 00 3f 72 03 00 e0 00 00:01:41.700 READ VERIFY SECTOR(S)
c5 00 01 39 03 00 e0 00 00:01:41.700 WRITE MULTIPLE
Error 442 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 59 18 ac 03 00 e0 Error: IDNF at LBA = 0x000003ac = 940
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 00 48 7d 03 00 e0 00 00:01:29.900 READ MULTIPLE
c4 00 48 35 03 00 e0 00 00:01:29.900 READ MULTIPLE
c4 00 48 ed 02 00 e0 00 00:01:29.900 READ MULTIPLE
c4 00 48 a5 02 00 e0 00 00:01:29.900 READ MULTIPLE
c4 00 48 5d 02 00 e0 00 00:01:29.900 READ MULTIPLE
Error 441 occurred at disk power-on lifetime: 1085 hours (45 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 59 18 ac 03 00 e0 Error: IDNF at LBA = 0x000003ac = 940
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 00 48 7d 03 00 e0 00 00:01:22.400 READ MULTIPLE
c6 00 10 00 00 00 e0 00 00:01:22.400 SET MULTIPLE MODE
91 00 3f 00 00 00 ef 00 00:01:22.400 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 00 00 00 00 e0 00 00:01:22.300 RECALIBRATE [OBS-4]
c4 00 01 01 00 00 a0 04 00:01:22.300 READ MULTIPLE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
root@Knoppix:/ramdisk/home/knoppix#Ist sie eindeutig hinüber?