• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Hauppauge WinTV-HVR1100 wird beim Start falsch erkannt

Linuxfan

Linuxfan

Member
Hallo,
erst mal vorweg: SuSE 10.1, Kernel 2.6.16.27-0.9-default.

Seit wenigen Tagen besitze ich die Hauppauge WinTV-HVR1100 und habe sie mit Mühe und Not wie auf http://www.linuxtv.org/v4lwiki/index.php/How_to_build_from_mercurial beschrieben zum Laufen gebracht, allerdings nur, wenn ich im Verzeichnis /usr/src/linux/v4l-dvb den Befehl make reload ausführen lasse. Dann sehe ich im Terminalfenster mit dmesg | grep -i saa

Code: 
saa7134: module not supported by Novell, setting U taint flag.
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 11, latency: 64, mmio: 0xdfffc800
saa7133[0]: subsystem: 0070:6701, board: Terratec Cinergy 400 TV [card=8,insmod option]
saa7133[0]: board init: gpio is 6400000
input: saa7134 IR (Terratec Cinergy 40 as /class/input/input3
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
tuner 0-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7146: module not supported by Novell, setting U taint flag.
saa7191: module not supported by Novell, setting U taint flag.
saa7111: module not supported by Novell, setting U taint flag.
saa7110: module not supported by Novell, setting U taint flag.
saa6588: module not supported by Novell, setting U taint flag.
saa6752hs: module not supported by Novell, setting U taint flag.
saa7114: module not supported by Novell, setting U taint flag.
saa7185: module not supported by Novell, setting U taint flag.
saa7127: module not supported by Novell, setting U taint flag.
saa7115: module not supported by Novell, setting U taint flag.
saa5246a: module not supported by Novell, setting U taint flag.
SAA5246A (or compatible) Teletext decoder driver version 1.8
saa7146_vv: module not supported by Novell, setting U taint flag.
saa7146: register extension 'budget_ci dvb'.
saa7134: module not supported by Novell, setting U taint flag.
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 11, latency: 64, mmio: 0xdfffc800
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
saa7133[0]: board init: gpio is 6400000
ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
tvaudio 0-004b: pic16c54 (PV951) found @ 0x96 (saa7133[0])
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio1
saa7134_dvb: module not supported by Novell, setting U taint flag.
DVB: registering new adapter (saa7133[0])
saa5249: module not supported by Novell, setting U taint flag.
SAA5249 driver (SAA5249 interface) for VideoText version 1.8
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_patch dvb'.
saa7134_empress: module not supported by Novell, setting U taint flag.
saa7146: register extension 'hexium gemini'.
saa7134_alsa: module not supported by Novell, setting U taint flag.
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xdfffc800 irq 11 registered as card -1
saa7146: register extension 'dpc7146 demonstration board'.
saa7146: register extension 'budget_av'.
saa7146: register extension 'hexium HV-PCI6 Orion'.
saa7146: register extension 'Multimedia eXtension Board'.
saa7146: register extension 'dvb'.
saa7134_dvb: module not supported by Novell, setting U taint flag.

Wie man sehen kann, wird ungefähr in der Mitte die richtige Karte erkannt:
Code: 
[...]
saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[...]

Beim Systemstart allerdings liefert mir dmesg | grep -i saa ohne die Erkennung meiner WinTV-HVR1100:

Code: 
saa7134: module not supported by Novell, setting U taint flag.
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 11, latency: 64, mmio: 0xdfffc800
saa7133[0]: subsystem: 0070:6701, board: Terratec Cinergy 400 TV [card=8,insmod option]
saa7133[0]: board init: gpio is 6400000
input: saa7134 IR (Terratec Cinergy 40 as /class/input/input3
saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
tuner 0-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

Wie schaffe ich es bzw. was muß ich modifizieren, damit meine WinTV-HVR1100 beim Systemstart richtig erkannt wird? Die aufgelistete Terratec Cinergy 400 TV war übrigens früher mal drin, ist aber entfernt, so daß ich überhaupt nicht verstehe, wie die erkannt werden kann.

Ein weiteres Problem ist, daß ich im YaST-Kontrollzentrum unter Hardware - TV-Karte die WinTV-HVR1100 nicht auswählen kann, dieser Kartentyp taucht nämlich in der Geräteliste nirgendwo auf.

Ein großes Dank für weitere Hilfe!
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Oben