traumtaucher
Newbie
Hallo zusammen!
System: Acer Aspire 5102 WLMi, ATI X1100, Synaptics Touchpad, Suse 10.2
Problem: Hab seit 4 Wochen Suse 10.2 am Laufen. Installation lief problemlos, Touchpad funktioniert einwandfrei. Auch die Installation des ATI-Treibers verlief ohne Probleme. Vor dessen Installation hab ich natuerlich meine xorg.conf gesichert. Nach der Installation hab ich mich dann gefreut wie ein Schnitzel, dass bei mir alles so reibungslos lief. Bis ich dann mal drei Tage spaeter mein Notebook (Desktop-Ersatz) von seinem Schreibtisch entfernt hab und feststellen musste, dass das Touchpad nicht mehr funktioniert. USB-Maus funktionert hingegen tadellos. Also die alte xorg.conf mit der vom ATI-Treiber überschriebenen verglichen und die alten Eintraege (als das Touchpad noch funktionierte) wieder reingeschrieben. Trotzdem macht es keinen Mucks. Weder ksynaptics installieren noch die x11-synaptics-Treiber rausschmeissen und wieder installieren brachte einen Erfolg. Jetzt bin ich ziemlich ratlos. Kann mir bitte jemand helfen?
Aus meiner Windows-Zeit weiss ich noch, dass man unter Windows Hardware aus dem Geraetemanager werfen kann und beim naechsten Neustart wird sie dann erkannt und verlangt nach einem Treiber. Aber so etwas geht unter Linux doch nicht, oder?
Hier noch meine xorg.conf:
System: Acer Aspire 5102 WLMi, ATI X1100, Synaptics Touchpad, Suse 10.2
Problem: Hab seit 4 Wochen Suse 10.2 am Laufen. Installation lief problemlos, Touchpad funktioniert einwandfrei. Auch die Installation des ATI-Treibers verlief ohne Probleme. Vor dessen Installation hab ich natuerlich meine xorg.conf gesichert. Nach der Installation hab ich mich dann gefreut wie ein Schnitzel, dass bei mir alles so reibungslos lief. Bis ich dann mal drei Tage spaeter mein Notebook (Desktop-Ersatz) von seinem Schreibtisch entfernt hab und feststellen musste, dass das Touchpad nicht mehr funktioniert. USB-Maus funktionert hingegen tadellos. Also die alte xorg.conf mit der vom ATI-Treiber überschriebenen verglichen und die alten Eintraege (als das Touchpad noch funktionierte) wieder reingeschrieben. Trotzdem macht es keinen Mucks. Weder ksynaptics installieren noch die x11-synaptics-Treiber rausschmeissen und wieder installieren brachte einen Erfolg. Jetzt bin ich ziemlich ratlos. Kann mir bitte jemand helfen?
Aus meiner Windows-Zeit weiss ich noch, dass man unter Windows Hardware aus dem Geraetemanager werfen kann und beim naechsten Neustart wird sie dann erkannt und verlangt nach einem Treiber. Aber so etwas geht unter Linux doch nicht, oder?
Hier noch meine xorg.conf:
Code:
# /.../
# SaX generated X11 config file
# Created on: 2007-05-10T15:57:20+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
FontPath "unix/:7100"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
# Option "IgnoreABI" "on"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[1]"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "Name" "Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Synaptics"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[3]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "ImPS/2 Generic Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 331 207
HorizSync 30-62
Identifier "Monitor[0]"
ModelName "QUANTADISPLAY LCD MONITOR"
Option "DPMS"
VendorName "QDS"
VertRefresh 43-60
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "Radeon XPRESS 200M 5975 (PCIE)"
BusID "1:5:0"
Driver "fglrx"
Identifier "Device[0]"
Option "FSAADisableGamma" "no"
Option "CapabilitiesEx" "0x00000000"
Option "ScreenOverlap" "0"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "mtrr" "off"
Option "FSAAMSPosX4" "0.000000"
Option "ForceGenericCPU" "no"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAScale" "1"
Option "FSAAMSPosY3" "0.000000"
Option "Capabilities" "0x00000000"
Option "GammaCorrectionI" "0x00000000"
Option "no_accel" "no"
Option "FSAAMSPosY4" "0.000000"
Option "UseFastTLS" "0"
Option "FSAAMSPosY5" "0.000000"
Option "FSAACustomizeMSPos" "no"
Option "FSAAEnable" "no"
Option "BlockSignalsOnLock" "on"
Option "GammaCorrectionII" "0x00000000"
Option "KernelModuleParm" "locked-userpages=0"
Option "FSAAMSPosX0" "0.000000"
Option "no_dri" "no"
Option "VideoOverlay" "on"
Option "UseInternalAGPGART" "no"
Option "PseudoColorVisuals" "off"
Option "StereoSyncEnable" "1"
Option "FSAAMSPosX1" "0.000000"
Option "OpenGLOverlay" "off"
Option "FSAAMSPosX2" "0.000000"
Option "Stereo" "off"
Option "FSAAMSPosX3" "0.000000"
Option "CenterMode" "off"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
Option "DAMAGE" "false"
EndSection