Hi,
ich habe einen Kingston USB 2.0 stick (fat32,vfat), dessen Übertragungsgeschwindigkeit ziemlich langsam ist.
Bestenfalls überträgt er mit 1,2 MB/s. Mein Iriver H300 und meine USB Festplatte funktionieren jedoch einwandfrei (auch fat32,vfat) mit einer Übertragungsrate von 12-15 MB/s.
"dmesg | grep usb" spuckt folgendes aus:
"dmesg | grep speed" dies
Auch das beenden von "sync" hat nichts geändert
Vielen Dank vorab
retro
ich habe einen Kingston USB 2.0 stick (fat32,vfat), dessen Übertragungsgeschwindigkeit ziemlich langsam ist.
Bestenfalls überträgt er mit 1,2 MB/s. Mein Iriver H300 und meine USB Festplatte funktionieren jedoch einwandfrei (auch fat32,vfat) mit einer Übertragungsrate von 12-15 MB/s.
"dmesg | grep usb" spuckt folgendes aus:
Code:
usb 3-8: USB disconnect, address 12
usb 3-8: new high speed USB device using ehci_hcd and address 14
usb 3-8: new device found, idVendor=13fe, idProduct=1a00
usb 3-8: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-8: Product: DataTraveler 2.0
usb 3-8: Manufacturer: Kingston
usb 3-8: SerialNumber: 5B6A14000EA7
usb 3-8: configuration #1 chosen from 1 choice
usb 1-4: USB disconnect, address 6
Code:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usb 1-1: new low speed USB device using ohci_hcd and address 2
gameport: EMU10K1 is pci0000:02:08.1/gameport0, io 0xbc00, speed 1189kHz
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-4: new low speed USB device using ohci_hcd and address 4
usb 3-8: new high speed USB device using ehci_hcd and address 4
usb 3-8: new high speed USB device using ehci_hcd and address 5
usb 3-8: new high speed USB device using ehci_hcd and address 6
usb 3-8: new high speed USB device using ehci_hcd and address 8
usb 1-4: new low speed USB device using ohci_hcd and address 5
usb 3-8: new high speed USB device using ehci_hcd and address 10
usb 1-4: new low speed USB device using ohci_hcd and address 6
usb 3-8: new high speed USB device using ehci_hcd and address 11
usb 3-8: new high speed USB device using ehci_hcd and address 12
usb 3-8: new high speed USB device using ehci_hcd and address 14
usb 1-4: new low speed USB device using ohci_hcd and address 7
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usb 1-1: new low speed USB device using ohci_hcd and address 2
gameport: EMU10K1 is pci0000:02:08.1/gameport0, io 0xbc00, speed 1189kHz
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-4: new low speed USB device using ohci_hcd and address 4
usb 3-8: new high speed USB device using ehci_hcd and address 4
usb 3-8: new high speed USB device using ehci_hcd and address 5
usb 3-8: new high speed USB device using ehci_hcd and address 6
usb 3-8: new high speed USB device using ehci_hcd and address 8
usb 1-4: new low speed USB device using ohci_hcd and address 5
usb 3-8: new high speed USB device using ehci_hcd and address 10
usb 1-4: new low speed USB device using ohci_hcd and address 6
usb 3-8: new high speed USB device using ehci_hcd and address 11
usb 3-8: new high speed USB device using ehci_hcd and address 12
usb 3-8: new high speed USB device using ehci_hcd and address 14
usb 1-4: new low speed USB device using ohci_hcd and address 7Vielen Dank vorab
retro