• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

Cinergy hybrid T USB XS....und sie läuft doch

ToX

Newbie
Hallo zusammen,

ich wollte kurz beschreiben wie ich den USB-DVB-T Adapter zum laufen gebracht habe.

Wichtig: mit dem Kernel 2.6.13.xx+ SuSE 10.0 hat es nicht funktioniert!!
Jetzt habe ich Kernel 2.6.16.21-0.25 + SuSE 10.1 laufen und damit ging es reibungslos!

Nach langem fummeln und generve lauft der Adapter jetzt 1a!

Als erstes sei auf diese Seite verwiesen: http://linuxtv.org/v4lwiki/index.php/Em2880

1. cd /lib/firmware
su passwd
wget http://mcentral.de/firmware/firmware.tgz
tar xvzf firmware.tgz
exit

2.
hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb-merge
(mercurial von http://www.selenic.com/mercurial/ runterladen)
cd v4l-dvb-merge
cd v4l
make
su passwd
make install
JETZT UNBEDINGT ein Reboot Adapter noch nicht einstecken!!!!!!

3. modprobe em28xx device_mode=1
modprobe em2880-dvb
Adapter jetzt einstecken und dmesg anschauen, es sollte so aussehen:

usb 1-3.2: new high speed USB device using ehci_hcd and address 6
usb 1-3.2: new device found, idVendor=0ccd, idProduct=0042
usb 1-3.2: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3.2: Product: Cinergy Hybrid T USB XS
usb 1-3.2: Manufacturer: TerraTec Electronic GmbH
usb 1-3.2: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
tvp5150: module not supported by Novell, setting U taint flag.
input: em2880/em2870 remote control as /class/input/input4
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
attach_inform: tvp5150 detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
tvp5150 0-005c: tvp5150am1 detected.
em28xx-video.c: requesting em2880-dvb!
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
em2880-dvb.c: VIDIOC_S_MODE
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
em2880-dvb.c: retrying with mt352 DVB-T demodulator
em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver snd-usb-audio
usb 1-3.2: USB disconnect, address 6
em28xx-input.c: remote control handler detached
em28xx #0: disconnecting em28xx#0 video
em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered
em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered
usbcore: deregistering driver em28xx
em28xx: module not supported by Novell, setting U taint flag.
em28xx v4l2 driver version 0.0.1 loaded
usbcore: registered new driver em28xx
em2880_dvb: module not supported by Novell, setting U taint flag.
usb 1-3.2: new high speed USB device using ehci_hcd and address 7
usb 1-3.2: new device found, idVendor=0ccd, idProduct=0042
usb 1-3.2: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-3.2: Product: Cinergy Hybrid T USB XS
usb 1-3.2: Manufacturer: TerraTec Electronic GmbH
usb 1-3.2: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
input: em2880/em2870 remote control as /class/input/input5
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
Loading base firmware: xc3028_init0.i2c.fw
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
em28xx-video.c: requesting em2880-dvb!
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em2880-dvb.c: DVB Init
em2880-dvb.c: VIDIOC_S_MODE
Loading base firmware: xc3028_8MHz_init0.i2c.fw
Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
xc3028-tuner.c: sending extra call for DVB-T
DVB: registering new adapter (em2880 DVB-T).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
em28xx #0: Found Terratec Hybrid XS

So, das wars eigentlich schon, Kaffein anschmeißen dann kommt ne Meldung das Kanäle jetzt gesucht werden können.

Viel Erfolg!

http://linuxtv.org/v4lwiki/index.php/Talk:Em2880#Em2880_Linux_User_Faq <---- unbedingt bei Fehlern hier reinschauen, ungemein hilfreich!

Gruß

ToX
 

Grothesk

Ultimate Guru
Ah. Sehr schön!

Da laufen nun beide Tuner? DVB in kaffeine und Analog in kdetv?

Magst du das HowTo nicht in das Wiki übertragen? Dort ist es wesentlich besser aufgehoben also hier im Forum.
 
OP
T

ToX

Newbie
Mit Kaffein läuft es prima (DVB-T)
kdeTV "friert" ein nach dem start, läuft irgendwie nicht!

Wenn du magst kannst du mein Post gerne bei WIKI einstellen! Wäre dir sehr dankbar!

Gruß

ToX
 

TweetyBird

Newbie
Hihoo...

Ich habe die Cinergy T USB XE... klappt dafür die Anleitung auch? habe nämlich noch keinen Chipsatz von dem Ding gefunden...

greez 2 all
Tweety
 
Habe auch eine Cinergy T USB XE. Die Anleitung hat bei mir noch keinen Erfolg gezeigt. Bin aber für jeden Tip dankbar.
 

TweetyBird

Newbie
.. und sie läuft doch (AUCH): Cinergy T USB XE ...
ist recht einfach, aber ich mache mal nen neuen thread..

http://www.linux-club.de/ftopic83790.html
 

nkl

Newbie
Hallo zusammen,
ich bin seit einer Woche blutiger Linux-Anfänger und versuche seitdem, meinen Cinergy T USB XS auf openSuse 11.1 (-2.6.27.7-9) zum laufen zu bringen. Da ich bei Schritt 2 der Installationsanleitung

http://linuxtv.org/hg/~mrechberger/v4l-dvb-merge

nicht gefunden habe, habe ich folgende Alternativen installiert:

v4l-dvb-kernel und v4l-dvb

installiert.

Bei Schritt 3 modprobe em2880-dvb wird mir angezeigt, dass das Modul nicht gefunden wird.


Für Eure Hilfe wäre ich sehr dankbar.
 

Grothesk

Ultimate Guru
http://linuxtv.org/wiki/index.php/TerraTec_Cinergy_Hybrid_T_USB_XS
Das Mopped?
Currently not supported by LinuxTV.
Was sagt uns denn
Code:
lsusb
zu dem Ding?

Ich würde mich mal hier durchbeißen:
http://mcentral.de/wiki/index.php5/Em2880#Installation
 

nkl

Newbie
Vielen Dank für die superschnelle Antwort.

Der Link "http://mcentral.de/wiki/index.php5/Em2880#Installation" ist goldrichtig.

Vorab müssen jedoch einige Voraussetzungen geschaffen bzw. folgende Pakete installiert werden, um den "Terratec Cinergy T USB XS" unter openSUSE 11.1 zum laufen zu bringen:

1. Grundlegende Entwicklungswerkzeuge / Linux-Kernel-Entwicklung
2. Linux-Kernel-Header
3. Kernel-Source
4. Mercurial

Zudem benötigt man noch die passende Firmware:

Hierzu Terminal öffnen und nachfolgende Schritte machen:
cd /lib/firmware
sudo wget http://85.10.198.106/firmware/firmware.tgz
sudo tar xvzf firmware.tgz

Dann erst gemäß o.g. Link weiter machen.
 
Oben