Hallo Leute,
versuche seit mehreren Tagen einen HP PSC 1110 all-in-one (
Multifunktionsgerät) unter SuSE 10.0 OSS über USB zu installieren leider
bisher ohne Erfolg. Als Drucker funktioniert das Gerät über Yast
installiert wunderbar nur die Scanner Installation scheitert . Beim
Scanner Test kommt die Fehlermeldung : "Error during device I/O"
Meine aktuelle Sane Konfig. :
=== Backend saned ===
=== Backend hpaio ===
grep: hpaio.conf: Datei oder Verzeichnis nicht gefunden
die Ausgabe von sane-find-scanner :
ralf@linux:/etc/sane.d> sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc
1100 series]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
die Ausgabe von scanimage -L
ralf@linux:/etc/sane.d> scanimage -L
device `hpaio:/usb/psc_1100_series?serial=MY3ADF20J4B0' is a hp HP psc
1100 series multi-function peripheral
Verwendete Sane Version :
sane-1.0.18-0.pm.2
Habe alles mögliche schon probiert komme aber irgendwie nicht weiter.
Viele Grüße
Ralf
versuche seit mehreren Tagen einen HP PSC 1110 all-in-one (
Multifunktionsgerät) unter SuSE 10.0 OSS über USB zu installieren leider
bisher ohne Erfolg. Als Drucker funktioniert das Gerät über Yast
installiert wunderbar nur die Scanner Installation scheitert . Beim
Scanner Test kommt die Fehlermeldung : "Error during device I/O"
Meine aktuelle Sane Konfig. :
=== Backend saned ===
=== Backend hpaio ===
grep: hpaio.conf: Datei oder Verzeichnis nicht gefunden
die Ausgabe von sane-find-scanner :
ralf@linux:/etc/sane.d> sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc
1100 series]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
die Ausgabe von scanimage -L
ralf@linux:/etc/sane.d> scanimage -L
device `hpaio:/usb/psc_1100_series?serial=MY3ADF20J4B0' is a hp HP psc
1100 series multi-function peripheral
Verwendete Sane Version :
sane-1.0.18-0.pm.2
Habe alles mögliche schon probiert komme aber irgendwie nicht weiter.
Viele Grüße
Ralf