• Willkommen im Linux Club - dem deutschsprachigen Supportforum für GNU/Linux. Registriere dich kostenlos, um alle Inhalte zu sehen und Fragen zu stellen.

neues Mainboard - ein paar Probleme

Keepers

Advanced Hacker
Hi,

habe vor ein paar Tagen ein neues Mainboard eingebaut. Auch mit VIA Chipsatz.
Seit dem gibt es leider ein paar Probleme.

Zu aller erst versucht er mit DMA irgendetwas rumzupopeln was gar nich funktioniert. Keine Ahnung woher er da ein Skript nimmt aber irgendwas stimmt da nicht.

Zweitens:
Laut seiner Aussage stehen in /etc/modprobe.conf am Ende noch alte Reste die fuer lm_sensors wichtig waren. Diese habe ich da aber schon per Hand rausgeloescht und er meckert beim Start immernoch darueber?

Drittens:
Nach jedem Start muss ich unter Yast meine Netzwerkkarte erneut "bearbeiten". Sie ist zwar schon konfiguriert angezeigt, aber ueber rcnetwork restart startet er sie genauso wenig wie beim Systemstart. Erst nach dem Bearbeiten legt er los.

Hier mal die boot.msg

Code:
Inspecting /boot/System.map-2.6.13-15.ck6.SUPER.1-default
Loaded 24235 symbols from /boot/System.map-2.6.13-15.ck6.SUPER.1-default.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15.ck6.SUPER.1-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
<4> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
<4> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>On node 0 totalpages: 262128
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 225280 pages, LIFO batch:31
<7>  HighMem zone: 32752 pages, LIFO batch:15
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 AMI                                   ) @ 0x000fa8b0
<7>ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x3fff0000
<7>ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x3fff0030
<7>ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x3fff00c0
<7>ACPI: DSDT (v001    VIA    K7VT4 0x00001000 INTL 0x02002024) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<4>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hdb3 vga=0x31a selinux=0    resume=/dev/hdb1  splash=verbose
<6>bootsplash: verbose mode.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 1707.834 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1033040k/1048512k available (2029k kernel code, 14576k reserved, 695k data, 204k init, 131008k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 3417.34 BogoMIPS (lpj=1708673)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>mtrr: v2.0 (20020519)
<4>CPU: AMD Sempron(tm) 2400+ stepping 01
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 2181k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 0c28)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
<6>PCI: Using configuration type 1
<3>request_module: runaway loop modprobe net-pf-1
<3>request_module: runaway loop modprobe char-major-5-1
<3>request_module: runaway loop modprobe net-pf-1
<3>request_module: runaway loop modprobe char-major-5-1
<3>request_module: runaway loop modprobe net-pf-1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 8 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>PCI: Bridge: 0000:00:01.0
<6>  IO window: disabled.
<6>  MEM window: dbe00000-dfefffff
<6>  PREFETCH window: cbd00000-dbcfffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<4>audit(1143571645.834:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 131072k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:d170
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 416732 bytes, v3).
<4>Console: switching to colour frame buffer device 158x59
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices: 
<4>PCI0 USB1 USB2 USB3 USB4 EHCI USBD PS2M PS2K  AC9  MC9 ILAN SLPB 
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>logips2pp: Detected unknown logitech mouse model 85
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
<5>SCSI subsystem initialized
<7>libata version 1.12 loaded.
<7>sata_via version 1.1
<4>    ACPI-0212: *** Warning: Device is not power manageable
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<4>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
<6>sata_via(0000:00:0f.0): routed to hard irq line 10
<6>ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 10
<6>ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 10
<6>ata1: no device found (phy stat 00000000)
<6>scsi0 : sata_via
<6>ata2: no device found (phy stat 00000000)
<6>scsi1 : sata_via
<6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
<4>    ACPI-0212: *** Warning: Device is not power manageable
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<6>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 11
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
<6>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
<6>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: WDC WD600BB-00CAA1, ATA DISK drive
<4>hdb: IC35L040AVVA07-0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
<6>hda: cache flushes not supported
<6> hda: hda1
<6>hdb: max request size: 128KiB
<6>hdb: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
<6>hdb: cache flushes supported
<6> hdb: hdb1 hdb2 hdb3
<7>Probing IDE interface ide1...
<4>hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>ACPI: CPU0 (power states: C1[C1])
<4>Attempting manual resume
<3>swsusp: Suspend partition has wrong signature?
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>ide: failed opcode was: unknown
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>ide: failed opcode was: unknown
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>ide: failed opcode was: unknown
<4>hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
<4>hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
<4>ide: failed opcode was: unknown
<6>hda: DMA disabled
<4>ide0: reset: success
<5>ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb3: using ordered data mode
<5>ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb3: checking transaction log (hdb3)
<5>ReiserFS: hdb3: Using r5 hash to sort names
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 305192k swap on /dev/hdb1.  Priority:-1 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Tue Mar 28 20:47:40 2006

Mounting shared memory FS on /dev/shmdone
Configuring serial ports...
Configured serial ports
doneActivating swap-devices in /etc/fstab...
doneActivating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
/dev/hdb2: clean, 47/14056 files, 14987/56224 blocks
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdb2 on /boot type ext2 (rw,acl,user_xattr)
/dev/hda1 on /windows/c type vfat (rw,noexec,nosuid,nodev,umask=000)
doneSetting up the CMOS clockdone
<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=1516 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/sbin/udevd ]
Starting udevd done
Loading required kernel modules
doneSetting up IDE DMA mode

/dev/hda:
 setting using_dma to 1 (on)
 using_dma    =  1 (on)

/dev/hdb:
 setting using_dma to 1 (on)
 using_dma    =  1 (on)
done
Creating /var/log/boot.msg
<notice>killproc: kill(19592,29)
donedone
Coldplug
Coldplug: cleaning /events hwup: Loading module 'lp'  for device 'printer'
 processing eventsdone
Setting up hostname 'ruediger'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(19592,3)

INIT: Entering runlevel: 5


<notice>checkproc: /sbin/udevd 19828
<notice>
Boot logging started on /dev/tty1(/dev/console) at Sun Mar 26 10:21:56 2006

Master Resource Control: previous runlevel: N, switching to runlevel: 5
startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=verbose ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=verbose ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-BUS daemondone
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
done<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 LC_ALL=de_DE.utf8 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=de_DE.utf8 PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=verbose ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
doneWaiting for mandatory devices:  eth-id-00:30:84:3d:fc:59
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 
    eth-id-00:30:84:3d:fc:59            No interface found
failedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .failed
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Mount SMB/ CIFS File Systems unused
Starting nfsboot (sm-notify) done
Importing Net File System (NFS)mount server reported tcp not available, falling back to udp
mount: RPC: Remote system error - Network is unreachable
done
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting up sensors: done
Checking/updating CPU microcodedone
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Try to get initial date and time via NTP from ptbtime1.ptb.deError : Temporary failure in name resolution
failed
Starting network time protocol daemon (NTPD)done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting AntiVir: avupdaterStarting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/bin/fetchmail) [ /usr/bin/fetchmail -d 900 -a -f /etc/fetchmailrc -L /var/log/fetchmail ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/bin/fetchmail ]
Starting fetchmaildone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
AntiVir / Linux Version 2.1.6-16
Copyright (c) 2006 by Avira GmbH.
All rights reserved.

AntiVir Automatic Internet Updater

status: active
update: every 24 hours at 10:27
log:    /var/log/avguard.log
email:  keepers@solidproject.de

done
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
Starting powersaved  (accessing ACPI events over acpid) done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=verbose SPLASH=yes ROOTFS_BLKDEV=/dev/hdb3 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>checkproc: /opt/kde3/bin/kdm 23211
Starting virus-scanner (amavisd-new):<notice>checkproc: amavisd 24055
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(22680,3)

Bin ratlos darueber und weiß nicht was ich gerade tun soll :/
 
OP
K

Keepers

Advanced Hacker
Das Problem der Netzwerkkarte habe ich mittlerweile in den Griff bekommen. Fehlt immernoch das richtig aergerliche Problem mit der modprobe.conf ...
 

stulle

Hacker
Hast du das Problem jemals in den Griff bekommen?

Ein Freund hat ebenfalls ein Problem.
Und zwar hat er (wie du) ein "Killproc" in seiner boot.msg.
Hast du rausgefunden woran das gelegen hat (liegt)?

Edit:
Sorry, war zu blöd.
Das scheint normal zu sein. :oops:
 
Oben