Grafikkarte: NVIDIA Geforce FX5700LE
Ich möchte auf meinem TV das gleiche Bild haben wie auf dem Monitor. Bei Suse hat das mit Sax funktioniert. Bei Kanotix hab ich die Xorg.conf selbst ediitiert.
Die Sachen in Farbe habe ich hinzugefügt.
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nvidia"
Option "RenderAccel" "1"
Option "AllowGLXWithComposite" "1"
Option "RandRRotation" "1"
Option "Twinview" "1"
Option "TwinViewOrientation" "Clone"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,800x600,640x480"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "SVIDEO"
Option "ConnectedMonitor" "CRT,TV"
Option "Coolbits" "1"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection
Hier war noch eine Zeile:
Option "IgnoreDisplayDevices" "TV"
Die habe ich gelöscht.
Am TV war danach ein Bild nur leider in der Auflösung von 800x600 und in Schwarz-weiß (mein Bildschirm hat eine von 1024x768) TV kann aber 1024x768 denn das ist mit Suse auch gegangen.
Also habe ich die Line
Ledier bleibt hier TV schwarz. Wieso weis ich auch nicht.
Wenn ich bei der Line
das "CRT" weg lasse Habe ich ein schönes farbiges Bild mit der Auflösung 1024x768. Aber am Bildschirm nix.
Ich auch versucht die Datei so umzuschreiben das man am Fernseher einen 2 Desktop hat. Nur hat das leider auch nicht funktioniert. Ich versteh das nicht. Bei Suse hab ich das Teil auch selber bearbeitet nur hier wills einfach nicht funzen.
Hier die xorg.conf für zwei Desktops. Ich weis nicht wo hier noch der Fehler liegen könnten. :roll:
http://www.really4you.at/PIC/xorg.conf
Vielleicht weis ja auch wer eine "Verwendbare" Hilfeseite für die xorg.conf.
Ich möchte auf meinem TV das gleiche Bild haben wie auf dem Monitor. Bei Suse hat das mit Sax funktioniert. Bei Kanotix hab ich die Xorg.conf selbst ediitiert.
Die Sachen in Farbe habe ich hinzugefügt.
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nvidia"
Option "RenderAccel" "1"
Option "AllowGLXWithComposite" "1"
Option "RandRRotation" "1"
Option "Twinview" "1"
Option "TwinViewOrientation" "Clone"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1024x768,800x600,640x480"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "SVIDEO"
Option "ConnectedMonitor" "CRT,TV"
Option "Coolbits" "1"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection
Hier war noch eine Zeile:
Option "IgnoreDisplayDevices" "TV"
Die habe ich gelöscht.
Am TV war danach ein Bild nur leider in der Auflösung von 800x600 und in Schwarz-weiß (mein Bildschirm hat eine von 1024x768) TV kann aber 1024x768 denn das ist mit Suse auch gegangen.
Also habe ich die Line
Code:
Option "MetaModes" "1024x768,800x600,640x480" in
Option "MetaModes" "1024x768" oder auch in
Option "MetaModes" "1024x768, 1024x768"
Ledier bleibt hier TV schwarz. Wieso weis ich auch nicht.
Wenn ich bei der Line
Code:
Option "ConnectedMonitor" "CRT,TV"
Ich auch versucht die Datei so umzuschreiben das man am Fernseher einen 2 Desktop hat. Nur hat das leider auch nicht funktioniert. Ich versteh das nicht. Bei Suse hab ich das Teil auch selber bearbeitet nur hier wills einfach nicht funzen.
Hier die xorg.conf für zwei Desktops. Ich weis nicht wo hier noch der Fehler liegen könnten. :roll:
http://www.really4you.at/PIC/xorg.conf
Vielleicht weis ja auch wer eine "Verwendbare" Hilfeseite für die xorg.conf.