SUSE 10.0 = Immer Netzwerkneustart nach dem Booten?

Hallo

Ich habe mit SUSE 10.0 folgendes Problem:

Mein Netzwerk muss nach dem booten mit "rcnetwork restart" neu gestartet werden, sonst geht nichts.
Ich habe ein Siemens Lifebook C 1110 mit einem ipw2200 (Centrino)
Wenn ich Kwifimanager starte sehe ich die Feldstärke und die manuell vergebene ip-Adresse.
Er erkennt auch die Basisstation.
Aber ohne rcnetwork restart geht nichts.

Das Gleiche gilt auch für das wiederaufwachen aus
"Suspend to Disk".
Ebenfalls ist ein rcnetwork restart fällig sonst geht nichts.

Was tun?

tom[/i]

Schau doch erst mal nach, was die logs zum dem Thema zu sagen haben.

/var/log/messages und /var/log/boot.msg sind da ganz gute Adressen.

Vielen Dank

Nun die Daten, Sorry es wird wohl etwas länger

messages:

ov 21 14:49:15 linux syslog-ng[4373]: syslog-ng version 1.6.8 starting
Nov 21 14:49:17 linux syslog-ng[4373]: Changing permissions on special file /dev/xconsole
Nov 21 14:49:17 linux syslog-ng[4373]: Changing permissions on special file /dev/tty10
Nov 21 14:49:17 linux ifup: No configuration found for eth0
Nov 21 14:49:19 linux ifup: No configuration found for eth0
Nov 21 14:49:20 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 21 14:49:20 linux kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Nov 21 14:49:20 linux kernel: lp0: using parport0 (interrupt-driven).
Nov 21 14:49:20 linux kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 21 14:49:20 linux kernel: agpgart: Detected an Intel 855 Chipset.
Nov 21 14:49:20 linux kernel: agpgart: Detected 8060K stolen memory.
Nov 21 14:49:20 linux kernel: agpgart: AGP aperture is 128M @ 0xd8000000
Nov 21 14:49:20 linux kernel: usbcore: registered new driver usbfs
Nov 21 14:49:20 linux kernel: usbcore: registered new driver hub
Nov 21 14:49:20 linux kernel: USB Universal Host Controller Interface driver v2.3
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0x000020c0
Nov 21 14:49:20 linux kernel: hub 1-0:1.0: USB hub found
Nov 21 14:49:20 linux kernel: hub 1-0:1.0: 2 ports detected
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:00:1d.1 -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.1: irq 11, io base 0x000020e0
Nov 21 14:49:20 linux kernel: hub 2-0:1.0: USB hub found
Nov 21 14:49:20 linux kernel: hub 2-0:1.0: 2 ports detected
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 21 14:49:20 linux kernel: uhci_hcd 0000:00:1d.2: irq 11, io base 0x00002400
Nov 21 14:49:20 linux kernel: hub 3-0:1.0: USB hub found
Nov 21 14:49:20 linux kernel: hub 3-0:1.0: 2 ports detected
Nov 21 14:49:20 linux kernel: ACPI-0212: *** Warning: Device is not power manageable
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Nov 21 14:49:20 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 21 14:49:20 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 21 14:49:20 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Nov 21 14:49:20 linux kernel: ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
Nov 21 14:49:20 linux kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Nov 21 14:49:20 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Nov 21 14:49:20 linux kernel: hub 4-0:1.0: USB hub found
Nov 21 14:49:20 linux kernel: hub 4-0:1.0: 6 ports detected
Nov 21 14:49:20 linux kernel: hw_random hardware driver 1.0.0 loaded
Nov 21 14:49:20 linux kernel: ACPI-0212: *** Warning: Device is not power manageable
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:00:1f.5 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Nov 21 14:49:20 linux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 21 14:49:20 linux kernel: shpchp: shpc_init : shpc_cap_offset == 0
Nov 21 14:49:20 linux kernel: intel8x0_measure_ac97_clock: measured 52328 usecs
Nov 21 14:49:20 linux kernel: intel8x0: clocking to 48000
Nov 21 14:49:20 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: Yenta: CardBus bridge found at 0000:01:0a.0 [10cf:10e7]
Nov 21 14:49:20 linux kernel: Yenta O2: res at 0x94/0xD4: ea/00
Nov 21 14:49:20 linux kernel: Yenta O2: enabling read prefetch/write burst
Nov 21 14:49:20 linux kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Nov 21 14:49:20 linux kernel: Yenta: ISA IRQ mask 0x0438, PCI irq 11
Nov 21 14:49:20 linux kernel: Socket status: 30000006
Nov 21 14:49:20 linux kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
Nov 21 14:49:20 linux kernel: cs: IO port probe 0x3000-0x3fff: clean.
Nov 21 14:49:20 linux kernel: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
Nov 21 14:49:20 linux kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:01:0a.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: Yenta: CardBus bridge found at 0000:01:0a.1 [10cf:10e7]
Nov 21 14:49:20 linux kernel: ieee80211_crypt: registered algorithm 'NULL'
Nov 21 14:49:20 linux kernel: ieee80211: 802.11 data/management/control stack, 1.0.3
Nov 21 14:49:20 linux kernel: ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Nov 21 14:49:20 linux kernel: Yenta: ISA IRQ mask 0x0438, PCI irq 11
Nov 21 14:49:20 linux kernel: Socket status: 30000006
Nov 21 14:49:20 linux kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
Nov 21 14:49:20 linux kernel: cs: IO port probe 0x3000-0x3fff: clean.
Nov 21 14:49:20 linux kernel: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
Nov 21 14:49:20 linux kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
Nov 21 14:49:20 linux kernel: 8139cp: pci dev 0000:01:0c.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Nov 21 14:49:20 linux kernel: 8139cp: Try the "8139too" driver instead.
Nov 21 14:49:20 linux kernel: 8139too Fast Ethernet driver 0.9.27
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: eth0: RealTek RTL8139 at 0xe0bbe000, 00:0b:5d:7c:c3:65, IRQ 11
Nov 21 14:49:20 linux kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Nov 21 14:49:20 linux kernel: ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
Nov 21 14:49:20 linux kernel: ipw2200: Copyright(c) 2003-2004 Intel Corporation
Nov 21 14:49:20 linux kernel: ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Nov 21 14:49:20 linux kernel: ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Nov 21 14:49:20 linux kernel: bootsplash: status on console 0 changed to on
Nov 21 14:49:20 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Nov 21 14:49:20 linux kernel: NET: Registered protocol family 17
Nov 21 14:49:26 linux kernel: mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x400000
Nov 21 14:49:36 linux mDNSResponder (Engineering Build) (Sep 5 2005 22:27:50) [5717]: starting
Nov 21 14:49:37 linux kernel: ACPI: AC Adapter [AC] (off-line)
Nov 21 14:49:37 linux kernel: ACPI: Battery Slot [CMB1] (battery present)
Nov 21 14:49:37 linux kernel: ACPI: Battery Slot [CMB2] (battery absent)
Nov 21 14:49:37 linux kernel: ACPI: Power Button (FF) [PWRF]
Nov 21 14:49:37 linux kernel: ACPI: Power Button (CM) [PWRB]
Nov 21 14:49:37 linux kernel: ACPI: Lid Switch [LID]
Nov 21 14:49:37 linux kernel: bootsplash: status on console 0 changed to on
Nov 21 14:49:37 linux kernel: NET: Registered protocol family 10
Nov 21 14:49:37 linux kernel: Disabled Privacy Extensions on device c036b9c0(lo)
Nov 21 14:49:37 linux kernel: IPv6 over IPv4 tunneling driver
Nov 21 14:49:37 linux sshd[5937]: Server listening on :: port 22.
Nov 21 14:49:38 linux smpppd[5888]: smpppd version 1.59 started
Nov 21 14:49:39 linux /usr/sbin/cron[6013]: (CRON) STARTUP (V5.0)
Nov 21 14:49:39 linux rcpowersaved: enter 'speedstep_centrino' into CPUFREQD_MODULE in /etc/sysconfig/powersave/cpufreq.
Nov 21 14:49:39 linux rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog.
Nov 21 14:49:39 linux kernel: bootsplash: status on console 0 changed to on
Nov 21 14:49:41 linux hal-subfs-mount[6225]: By hald-subfs-mount created link /media/OpenOffice_org__PrOOo-Box_2_0 got removed.
Nov 21 14:49:43 linux ifup: No configuration found for sit0
Nov 21 14:49:44 linux hal-subfs-mount[6310]: SYMLINKS:: disk/by-id/ata-TOSHIBA_DVD-ROM_SD-R2512_4549607211 disk/by-path/pci-0000:00:1f.1-ide-1:0 cdrecorder cdrom dvd
Nov 21 14:49:44 linux hal-subfs-mount[6310]: MOUNT_POINT:: /media/cdrecorder
Nov 21 14:49:44 linux hal-subfs-mount[6310]: MOUNTPOINT:: /media/cdrecorder
Nov 21 14:49:44 linux kernel: subfs 0.9
Nov 21 14:49:44 linux hal-subfs-mount[6310]: Collected mount options and Called(0) /bin/mount -t subfs -o fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 /dev/hdc "/media/cdrecorder"
Nov 21 14:49:44 linux kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Nov 21 14:49:44 linux udevd[2242]: get_netlink_msg: no ACTION in payload found, skip event 'mount'
Nov 21 14:49:44 linux kernel: ISO 9660 Extensions: RRIP_1991A
Nov 21 14:49:46 linux modprobe: FATAL: Error inserting sonypi (/lib/modules/2.6.13-15.ck6.SUPER.1-default/kernel/drivers/char/sonypi.ko): No such device
Nov 21 14:49:47 linux udevd[2242]: get_netlink_msg: no ACTION in payload found, skip event 'umount'
Nov 21 14:49:48 linux kernel: eth1: no IPv6 routers present
Nov 21 14:50:58 linux su: (to root) test1 on /dev/pts/2
Nov 21 14:50:59 linux su: (to root) test1 on /dev/pts/2


nach rcnetwork restart

Nov 21 14:54:10 linux su: (to root) test1 on /dev/pts/3
Nov 21 14:54:13 linux dhcpcd[5037]: terminating on signal 15
Nov 21 14:54:13 linux dhcpcd-hook: Skipping 'ifdown $INTERFACE -o dhcp' call
Nov 21 14:54:17 linux kernel: ieee80211_crypt: registered algorithm 'WEP'


boot message

Inspecting /boot/System.map-2.6.13-15.ck6.SUPER.1-default
Loaded 24235 symbols from /boot/System.map-2.6.13-15.ck6.SUPER.1-default.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15.ck6.SUPER.1-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
<4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable)
<4> BIOS-e820: 000000001f6f0000 - 000000001f6f8000 (ACPI data)
<4> BIOS-e820: 000000001f6f8000 - 000000001f700000 (ACPI NVS)
<4> BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
<4> BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
<4> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>502MB LOWMEM available.
<7>On node 0 totalpages: 128752
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 124656 pages, LIFO batch:31
<7> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 FUJ ) @ 0x000f58b0
<7>ACPI: RSDT (v001 FUJ FJNB16F 0x01300000 FUJ 0x00001000) @ 0x1f6f1d37
<7>ACPI: FADT (v001 FUJ FJNB16F 0x01300000 FUJ 0x00001000) @ 0x1f6f78a2
<7>ACPI: SSDT (v001 FUJ FJNB16F 0x01300000 INTL 0x20030228) @ 0x1f6f7916
<7>ACPI: SSDT (v001 FUJ FJNB16F 0x01300000 MSFT 0x0100000e) @ 0x1f6f7d2a
<7>ACPI: BOOT (v001 FUJ FJNB16F 0x01300000 FUJ 0x00001000) @ 0x1f6f7fd8
<7>ACPI: DSDT (v001 FUJ FJNB16F 0x01300000 MSFT 0x0100000e) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0xfc08
<6>ACPI: local apic disabled
<4>Allocating PCI resources starting at 20000000 (gap: 20000000:dec10000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda8 vga=0x317 selinux=0 resume=/dev/hda5 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 599.968 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 504920k/515008k available (2029k kernel code, 9524k reserved, 695k data, 204k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 1200.69 BogoMIPS (lpj=600346)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
<7>CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<7>CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>mtrr: v2.0 (20020519)
<4>CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1718k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 0800)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=3
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
<7>Boot video device is 0000:00:02.0
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
<4>PCI: Bus 2, cardbus bridge: 0000:01:0a.0
<4> IO window: 00004000-00004fff
<4> IO window: 00005000-00005fff
<4> PREFETCH window: 20000000-21ffffff
<4> MEM window: 26000000-27ffffff
<4>PCI: Bus 6, cardbus bridge: 0000:01:0a.1
<4> IO window: 00006000-00006fff
<4> IO window: 00007000-00007fff
<4> PREFETCH window: 22000000-23ffffff
<4> MEM window: 28000000-29ffffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: 3000-3fff
<6> MEM window: d0200000-d02fffff
<6> PREFETCH window: 20000000-23ffffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<6>ACPI: PCI Interrupt 0000:01:0a.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
<6>Simple Boot Flag at 0x7f set to 0x1
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<4>audit(1132580920.554:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xd8000000, mapped to 0xe0080000, using 6144k, total 8000k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: protected mode interface info at 00ff:44f0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
<4>Console: switching to colour frame buffer device 127x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13S2M] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4> ACPI-0212: *** Warning: Device is not power manageable
<6>ACPI: PCI Interrupt 0000:00:1f.6 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>UAR1 HUB A97M LID
<6>ACPI: (supports S0 S3 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH4: IDE controller at PCI slot 0000:00:1f.1
<4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
<6>ICH4: chipset revision 3
<6>ICH4: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x2440-0x2447, BIOS settings: hdaMA, hdbio
<6> ide1: BM-DMA at 0x2448-0x244f, BIOS settings: hdcMA, hddio
<7>Probing IDE interface ide0...
<4>hda: ST94019A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 1024KiB
<6>input: PS/2 Generic Mouse on isa0060/serio4
<6>hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
<7>Probing IDE interface ide1...
<4>hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<4>Attempting manual resume
<3>swsusp: Suspend partition has wrong signature?
<5>ReiserFS: hda8: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda8: using ordered data mode
<5>ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda8: checking transaction log (hda8)
<5>ReiserFS: hda8: Using r5 hash to sort names
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>Adding 1012052k swap on /dev/hda5. Priority:-1 extents:1
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<6>bootsplash: status on console 0 changed to on
<5>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda7: using ordered data mode
<5>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda7: checking transaction log (hda7)
<5>ReiserFS: hda7: Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Mon Nov 21 14:48:52 2005

Mounting shared memory FS on /dev/shmdone
Activating swap-devices in /etc/fstab...
done<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=806 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/udevd ]
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Starting udevd done
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
Activating LVM volume groups...
No volume groups found
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
Reiserfs super block in block 16 on 0x307 of format 3.6 with standard journal
Blocks (total/free): 1493760/399456 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hda7' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda7 on /home type reiserfs (rw)
/dev/hda1 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
/dev/hda2 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
doneSetting up the CMOS clockdone
Loading required kernel modules
done<notice>killproc: kill(2175,29)
Creating /var/log/boot.msg
donedone
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Coldplug
Coldplug: cleaning /events hwup: Loading module 'lp' for device 'printer'
processing eventsdone
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(2175,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Mon Nov 21 14:49:15 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 4182<notice>checkproc: /sbin/udevd 4015<notice>checkproc: /sbin/udevd 3902<notice>checkproc: /sbin/udevd 3886<notice>checkproc: /sbin/udevd 3877<notice>checkproc: /sbin/udevd 3871<notice>checkproc: /sbin/udevd 3227<notice>checkproc: /sbin/udevd 2242
Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
done
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneSetting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
eth0 No configuration found for eth0
unused eth1 device: Intel Corporation PRO/Wireless 2200BG (rev 05)
eth1 configuration: wlan-id-00:0e:35:d9:9b:29
eth1 starting wpa_supplicant
eth1 (DHCP) . . . <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
. . no IP address yet... backgrounding.
waiting
Waiting for mandatory devices: wlan-id-00:0e:35:d9:9b:29
11 9 8 <notice>checkproc: /opt/kde3/bin/kdm 5135
6 4 3 2 0
eth1 interface could not be set up
failedSetting up service network . . . . . . . . . . . . . . . .failed
Starting service kdmdone
Starting mdnsd<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
done
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
Importing Net File System (NFS)unused
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
done
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting cupsddone
Starting SMPPPDdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>checkproc: /opt/kde3/bin/kdm 5135
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
done
Starting powersaved (accessing ACPI events over acpid) <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda8 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: nfs
<notice>killproc: kill(4278,3)


Any idea?


tom

was ist denn die Ausgabe von iwconfig bevor "rcnetwork restart" aufgerufen wird?

Hallo HL

Vielen Dank

iwconfig gibt folgendes aus:

IEEE 802.11g ESSID:"acer1"
Mode:Managed Channel:13 Access Point: 00:04:0E:17:74:E6
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=51/100 Signal level=-70 dBm Noise level=-82 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:14

Mir fällt dabei auf, dass die Encryption auf off steht, obwohl nach dem rcnetwork restart der Encyptionkey eingetragen ist.

Kann da das Problem liegen?

tom

scheichlinux schrieb:

Hallo HL

Vielen Dank

iwconfig gibt folgendes aus:

I
Mir fällt dabei auf, dass die Encryption auf off steht, obwohl nach dem rcnetwork restart der Encyptionkey eingetragen ist.

Kann da das Problem liegen?

tom

Zum Vergrößern anklicken....

Das ist auch meine Vermutung, ich habe nur noch nicht kapiert warum das auftritt.
Bei mir hilft nach dem KDE start einmal ifdown <interface> und dann ifup <interface> aufzurufen. Danach ist bei iwconfig der encryption key gesetzt und das WLAN funktioniert

Hallo HL

Danke für Deine Info

Nun habe ich das Problem dass ich für Ifup oder ifdown immer als root einloggen muss.
Kann ich das umgehen?
Für mich ist das insbesondere deshalb nervig, weil dieselbe Problematik (Netwerk muss neu gestartet werden) bei mir auch bei dem Aufwachen aus dem Suspend to Disk auftritt.

Hast Du schon mal versucht verschiedene Dienste beim Laden zu übergehen?


Gruß

tom

Hallo,

ob man nun 'rcnetwork restart' oder 'ifup <interface>' eingeben muß, wo ist da der Unterschied? OK, die ifup-Variante verlangt weniger Eingabe aber im Prinzip sind beide Sachen äquivalent, denn ifup wird in /etc/init.d/network, also in rcnetwork, aufgerufen,

Zunächst mal: Ich habe ein "ähnliches Problem". Warum ähnlich?

- Ich habe SuSE 10 und ipw2200bg (Asus A7VC Notebook)
- Ich muß auch 'rcnetwork restart' in level 5 (nach kdm) ausführen
- Vermutlich läuft das WLAN bei Dir auch unter WinXP ohne Probleme ;(

Bei mir sind leider auch andere Probleme vorhanden, die bei Dir nicht zu sehen sind. Z.B. der Adapter wird bei mir während des Bootens gar nicht erkannt. Aber nach 'init 5' kann ich, vor dem 'rcnetwork restart', 'modprobe ipw2200' eingeben und schon klappt alles.

Das ist mehr als merkwürdig und deutet IMHO auf ein prinzipielleres Problem mit SuSE 10 und dem ipw2200bg hin. Ich habe schon Einiges ausprobiert, leider bis dato ohne Erfolg. Aber, wie man sieht, ich bin immer noch auf der Suche nach Hinweisen und ich glaube, daß unsere Proleme irgendwie etwas Gemeinsames haben. Deswegen sollten wir uns gegenseitig helfen . Bis jetzt habe ich leider wenig Erfolg gehabt aber ich werde berichten, sollte mir etwas Neues einfallen.

Gruß,
GmeP

scheichlinux schrieb:

Hallo HL

Danke für Deine Info

Nun habe ich das Problem dass ich für Ifup oder ifdown immer als root einloggen muss.
Kann ich das umgehen?
..


tom

Zum Vergrößern anklicken....

mir ist da nichts eingefallen. Ich habe noch etwas rumprobiert: IP-Adresse mit DHCP konfigurieren und unter erweitert oder so ähnlich "beim Systemstart laden" haben vermutlich geholfen (habe das Notebook nicht hier, ist bei einem Bekannten, deshalb weiss ich die genaue Konfiguration nicht mehr

Hallo HL

unter
ipw2200.sourceforge.net
gibt es Treiber zum selberbauen.

Habe ich mal unter Suse 9.2 mit Version 1.04 gemacht
lief prima.

Macht es Sinn, wenn ich versuche in den nächsten Tagen die Firmware welche Suse mitliefert durch eine selbstgebaute zu ersetzen?

Oder wurde das schon ausprobiert?

Gruß

tom

scheichlinux schrieb:

Hallo HL

Habe ich mal unter Suse 9.2 mit Version 1.04 gemacht
lief prima.

Macht es Sinn, wenn ich versuche in den nächsten Tagen die Firmware welche Suse mitliefert durch eine selbstgebaute zu ersetzen?

Oder wurde das schon ausprobiert?

tom

Zum Vergrößern anklicken....

Also ich habe es noch nicht probiert. Da auf dem Notebook das WLAN jetzt läuft, traue ich mich nicht mehr, nochmals was zu ändern

Hi,

nachdem ich mich auch ewig mit dem Problem rumgeschlagen hab, und das ewige "modprobe ipw2200 + rcnetwork restart" als root nach jedem Booten leid war, hab ich jetzt SuSE 10.0 OSS auf meinem Acer Travelmate 4001 WLMI neu installiert. Danach hab ich dieses rpm ftp://ftp.gwdg.de/pub/linux/suse/ft...Extra/suse/noarch/ipw-firmware-5-6.noarch.rpm installiert, als root in der Konsole ipw2200 aufgerufen und anschließend über Yast meine WLAN-Karte eingerichtet. Sofort wurde bei der Einrichtung auch das Modul ipw2200 erkannt und seitdem läuft nach dem Booten alles problemlos. Vielleicht hilft es Euch.
Viele Grüße