Hallo,
habe die Frage schon einmal gestellt, jedoch in nicht besonders konkreter Form. Da ich den Eindruck habe, dass der Thread nicht mehr beachtet wird, will ich die Frage nun noch einmal stellen:
Ich möchte den Terminkalender aus kmail mit meinem Siemens k700i abgleichen. Dafür habe ich mir ein usb-datenkabel gekauft für das folgendes Treiberpaket (als Quellcode) zur Verfügung gestellt wird. Allerdings bekomme ich den Mist nicht eingerichtet. Bitte helft mir!!!!
Habe folgendes Treiberpaket downgeloadet:
blumi@linux:~/ld_pl2303_v0213> dir
insgesamt 96
-rw------- 1 blumi users 942 2002-02-13 23:49 Makefile
-rw------- 1 blumi users 20602 2002-02-13 23:46 pl2303.c
-rw------- 1 blumi users 3606 2002-02-13 23:34 pl2303.h
-rw------- 1 blumi users 282 2002-03-15 11:25 readme.txt
-rw------- 1 blumi users 46943 2002-02-13 23:34 usbserial.c
-rw------- 1 blumi users 8283 2002-02-13 23:34 usb-serial.h
die makefile sieht wie folgt aus:
# Kernel includes. Please avoid
# using '/usr/include' unless all
# other options exhausted.
#
KINCLUDES=/usr/src/linux/include
# uncomment line below if you have SMP
#SMPFLAGS= -D__SMP__ -DCONFIG_SMP=1
# Unless you have a 386/486, you shouldn't need
# to change anything below here...
CPUFLAGS= -DCPU=586 -march=i586
MODULE= pl2303
CC= gcc
KERNFLAGS= \
-D__KERNEL__ -I$(KINCLUDES) $(CPUFLAGS) $(SMPFLAGS) \
-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
-fno-strict-aliasing -pipe -DMODULE
EXTRA_CFLAGS= -DEXPORT_SYMTAB
# DBGCFLAGS = -DDEBUG -DUSB_SERIAL_DEBUG
CFLAGS= $(KERNFLAGS) $(DBGCFLAGS)
all:: $(MODULE).o usbserial.o
$(MODULE).o: $(MODULE).c usb-serial.h
$(CC) $(CFLAGS) -c $<
usbserial.o: usbserial.c usb-serial.h
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c $<
inst:
insmod ./usbserial.o
insmod ./pl2303.o
uninst:
rmmod pl2303
rmmod usbserial
clean:
rm -f *.o
die readme sieht wie folgt aus:
Release Information
Driver Version for Linux 2.4.x : V0213
Released date: 02/13/2002
Files Included in This Release:
pl2303.c
pl2303.h
usbserial.c
usb-serial.h
readme.txt
makefile
Changes in This Release:
1. To fixed using cat command problem in Linux
Das Paket "modules" habe ich installiert. Mein Problem ist, dass ich weder eine configure-datei habe (zum kompilieren - der einzig mir bekannte weg) noch dass die Ausführung von make zu einem Ergebnis führt.
habe die Frage schon einmal gestellt, jedoch in nicht besonders konkreter Form. Da ich den Eindruck habe, dass der Thread nicht mehr beachtet wird, will ich die Frage nun noch einmal stellen:
Ich möchte den Terminkalender aus kmail mit meinem Siemens k700i abgleichen. Dafür habe ich mir ein usb-datenkabel gekauft für das folgendes Treiberpaket (als Quellcode) zur Verfügung gestellt wird. Allerdings bekomme ich den Mist nicht eingerichtet. Bitte helft mir!!!!
Habe folgendes Treiberpaket downgeloadet:
blumi@linux:~/ld_pl2303_v0213> dir
insgesamt 96
-rw------- 1 blumi users 942 2002-02-13 23:49 Makefile
-rw------- 1 blumi users 20602 2002-02-13 23:46 pl2303.c
-rw------- 1 blumi users 3606 2002-02-13 23:34 pl2303.h
-rw------- 1 blumi users 282 2002-03-15 11:25 readme.txt
-rw------- 1 blumi users 46943 2002-02-13 23:34 usbserial.c
-rw------- 1 blumi users 8283 2002-02-13 23:34 usb-serial.h
die makefile sieht wie folgt aus:
# Kernel includes. Please avoid
# using '/usr/include' unless all
# other options exhausted.
#
KINCLUDES=/usr/src/linux/include
# uncomment line below if you have SMP
#SMPFLAGS= -D__SMP__ -DCONFIG_SMP=1
# Unless you have a 386/486, you shouldn't need
# to change anything below here...
CPUFLAGS= -DCPU=586 -march=i586
MODULE= pl2303
CC= gcc
KERNFLAGS= \
-D__KERNEL__ -I$(KINCLUDES) $(CPUFLAGS) $(SMPFLAGS) \
-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
-fno-strict-aliasing -pipe -DMODULE
EXTRA_CFLAGS= -DEXPORT_SYMTAB
# DBGCFLAGS = -DDEBUG -DUSB_SERIAL_DEBUG
CFLAGS= $(KERNFLAGS) $(DBGCFLAGS)
all:: $(MODULE).o usbserial.o
$(MODULE).o: $(MODULE).c usb-serial.h
$(CC) $(CFLAGS) -c $<
usbserial.o: usbserial.c usb-serial.h
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c $<
inst:
insmod ./usbserial.o
insmod ./pl2303.o
uninst:
rmmod pl2303
rmmod usbserial
clean:
rm -f *.o
die readme sieht wie folgt aus:
Release Information
Driver Version for Linux 2.4.x : V0213
Released date: 02/13/2002
Files Included in This Release:
pl2303.c
pl2303.h
usbserial.c
usb-serial.h
readme.txt
makefile
Changes in This Release:
1. To fixed using cat command problem in Linux
Das Paket "modules" habe ich installiert. Mein Problem ist, dass ich weder eine configure-datei habe (zum kompilieren - der einzig mir bekannte weg) noch dass die Ausführung von make zu einem Ergebnis führt.